BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).

BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).

• as per file attached

• as per file attached

IGNITER BAG FOR M-92

AS PER ATTACHED FILE

OFN/BMCS/M-92/INGNITER BAG

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

BRASS STRIP 32.00 +_ 0.5 MM WIDE X 1.47 +_ 0.02 MM THICK IN LENGTH OF 2 TO 3 METERS. TO SPECN BS-STA-7/CZ-5.

• as per file attached

• as per file attached

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.

• as per file attached

• as per file attached

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

BRASS STRIP 27.0+/-0.5 MM WIDE X 0.69 +/- 0.02 MM THICK TO SPECN:- BS-2870-80 CZ-106 CONDITION "O".

• as per file attached

• as per file attached

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN.JSS-9535-02-2008(REVISION NO.3).

• as per file attached

• as per file attached

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.

• as per file attached

• as per file attached

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

BRASS STRIP 24 X 0.457 (+/-0.02) MM TO SPECN.IS:410-1977 (THIRD REVISION)(REAFFIRMED 2006) AMENDMENT NO.1 APRIL 1981DESIG.Cu Zn 30 IN ANNEALD CONDITION.

• as per file attached

• as per file attached

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

BRASS STRIP 18.0+/-0.5 WIDE X 0.9+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(Rev.No.3) HARDNESS 105-120 VPN.

• as per file attached

• as per file attached

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

BRASS STRIP 31.75MM X 0.71MM THICK SPECN: JSS-9535-2-2008 (REV.NO.3)

• as per file attached

• as per file attached

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.

• as per file attached

• as per file attached

PACKING BOX

PACKING BOX TO DRG NO.B-23/MA/4267018/12 M3

• packing boxes

• packing boxes

PACKING BOX (SPTA) TO DRG NO. T01/MA/4.162.236/14M2.

PACKING BOX (SPTA) TO DRG NO. T01/MA/4.162.236/14M2.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

COPPER STRIP(FOIL)COLLED ROLLED 24+0.5MM WIDE X0.05+0.0127MMTHICK TO SPECN:BS 2870-1980 C 101.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN

• as per file attached

• as per file attached

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.

• uploaded soon

• uploaded soon

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.

• as per file attached

• as per file attached

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1

OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1

OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELONGATION-12% MIN.BRENELL HARDNESS 105-130

• as per attached file

• as per attached file

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.

• as per file attached

• as per file attached

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.

COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION

• as per file attached

• as per file attached

LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.

LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.

LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS.

• MELTING FACILITY
• EXTRUSION FACILITY
• STRAIGHTNING & TRIMMING FACILITY
• N/A
• N/A

• RELEVANT INSPECTION & TESTING FACILITY
• N/A
• N/A
• N/A
• N/A

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.

• as per attached file

• as per attached file

SAND BLASTING, ANODIZING/PHOSPHATING, MASKING & PAINTING OF TNPO-170A SET OF 6 COMPONENT (TNPO 170A BODY, BOTTOM, COVER, SHUTTER, ANGLE PIECE LEFT, ANGLE PIECE RIGHT) AS PER DRG. No. AU-8020251, 8040080, 8050073, 8642006, 8010024 & 8010025.

SAND BLASTING, ANODIZING/PHOSPHATING, MASKING & PAINTING OF TNPO-170A SET OF 6 COMPONENT (TNPO 170A BODY, BOTTOM, COVER, SHUTTER, ANGLE PIECE LEFT, ANGLE PIECE RIGHT) AS PER DRG. No. AU-8020251, 8040080, 8050073, 8642006, 8010024 & 8010025.

St. Forging Plate Bottom to DRG No. SKM-283*2

St. Forging Plate Bottom to DRG No. SKM-283*2

SKM-283*2

Threaded Piston Extension for CQB DRG. No. 1901 01 01 00 03 002 00DC. Item code (7012670015)

Threaded Piston Extension for CQB DRG. No. 1901 01 01 00 03 002 00DC. Item code (7012670015)

DRG. No. 1901 01 01 00 03 002 00DC.

• Machining

• 1)Chemical & Mechanical properties as per std. given drawing /Specification.
• 2)Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.

• 1-Melting Furnace 2-Ingot Casting Facility 3-Desired size rod making Facility (Extrusion/Rolling etc.)

• Relevant Inspection & testing Facility

CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max)

TO BOFORS SPECN:BMK-07-G-55.CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES OFCUPRO NICKEL TUBING ARE FOLLOWS: CHEMICAL COMPOSITION:Cu-92.5 TO 94.5%, Mn-0.5% Max.Ni-5 TO 7% REMAINDER MAX 0.5%.PHYSICAL PROPERTIES: TENSILE STRENGTH-235.36 Mpa Min.ALONGATION (10xd)-30% Min.

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

• 1. Melting furnace 2. Machining facility 3. Piercing facility 4. Mandrel milling facility 5. Heat treatment facility 6. Pressure testing facility 7.Hydraulic testing facility 8. Other relevant inspection and testing facility

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET HARDNESS & OTHER PROPERTIES AFTER ANNEALING ASPER SPECN. MATERIAL SHOULD BE SUPPLIED IN PACKED CONDITIONTO AVOID DAMAGE OF TUBE. IF SUPPLIED IN LOOSE CONDITIONDAMAGE/DENT/BENT ARE NOT ACCEPTABLE.

COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWNCOND.& MEET

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Min,UTS-412 mpa Min,ELONGATION-12% Min,BH.NO.105-130 (QAP ENCLOSED).

ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIMIT275 mpa Mi

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa Min.ELONGATION-12% Min BRINEL HARDNESS-105-130(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLIMIT-275Mpa M

• as per attached file

• as per attached file

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.

• as per file attached

• as per file attached

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

• as per file attached

• as per file attached

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.

• as per file attached

• as per file attached

STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

29 P 0038*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa Min,ELONGATION 12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa Min,ELONGATION 12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa MinUTS-412 MPa

• as per attached file

• as per attached file

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".

• as per attached file

• as per attached file

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa Min,ALONGATION-12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa Min,ALONGATION-12% Min,BRINELL HARDNESS 105-130.(QAP ENCLOSED).

ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa MinUTS-412 Mpa

• as per attached file

• as per attached file

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIELD STRENGTH S 0.2 32/40KG/mmsq HB 115/135.

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIELD STRENGTH S 0.2 32/40KG/mmsq HB 115/135.

ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION% 10/16,YIEL

• as per attached file

• as per attached file

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.

• as per attached file

• as per attached file

Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A

Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A

IS:190-1991 , IS:5247 pt-I&II

IS:190-1991 , IS:5247 pt-I&II

BRASS ROD 17MM BS2874 CZ121 PB3

BRASS ROD 17MM BS2874 CZ121 PB3

• as per file attached

• as per file attached

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.

• as per attached file

• as per attached file

BRASS ROD 8MM BS2874 CZ122 'M'

BRASS ROD 8MM BS2874 CZ122 'M'

• as per file attached

• as per file attached

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".

• as per attached file

• as per attached file

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".

• as per file attached

• as per file attached

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.

• as per file attached

• as per file attached

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.

• as per file attached

• as per file attached

ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.

ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.

• as per attached file

• as per attached file

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).

• as per file attached

• as per file attached

BRASS ROD 4MM BSEN12166 CUZN39PB2

BRASS ROD 4MM BSEN12166 CUZN39PB2

BRASS ROD 4MM BSEN12166 CUZN39PB2

• as per file attached

• as per file attached

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H

• as per file attached

• as per file attached

BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN

BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN

BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN

• as per file attached

• as per file attached

BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.

BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.

BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.

• as per file attached

• as per file attached

STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACKSDETECTION BY MAGNETIC/ULTRASONIC METHOD.THE RODS ARE REQUIRED IN REELED,PEELD AND GROUND CONDITION IN STRAIGTH LENGTH OF2.50 TO 3.00 MTRS.THE BARS ARE REQUIRED TO BE SUPPLIED DULY100% MAGNETIC/ULTRASONIC CRACK DETECTION.BOTH END OF EACHROD SHOULD BE MACHINED AND CHAMPHERED OF 3MM X 45 DEG. ANDCOLOUR CODED TO SPECIFICATION IS-2049:1978(FIRST REVISION)(REAFFIRMED-2003). MATERIAL SHOULD BE SATISFY MECHANICALPROPERTIES STIPULATED IN SPECIFICATION.

STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACKSDETECTION BY MAGNETIC/ULTRASONIC METHOD.THE RODS ARE REQUIRED IN REELED,PEELD AND GROUND CONDITION IN STRAIGTH LENGTH OF2.50 TO 3.00 MTRS.THE BARS ARE REQUIRED TO BE SUPPLIED DULY100% MAGNETIC/ULTRASONIC CRACK DETECTION.BOTH END OF EACHROD SHOULD BE MACHINED AND CHAMPHERED OF 3MM X 45 DEG. ANDCOLOUR CODED TO SPECIFICATION IS-2049:1978(FIRST REVISION)(REAFFIRMED-2003). MATERIAL SHOULD BE SATISFY MECHANICALPROPERTIES STIPULATED IN SPECIFICATION.

STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACKSDETECTION B

• uploaded soon

• uploaded soon

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE

• file attached

• file attached

STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.

STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.

AS PER ITEM DESCRIPTION.

• 1. Electric Arc Furnace/other suitable furnace 2. Degassing unit 3. Refining Furnace 4. Continuous casting m/c 5. De-Scaler m/c. 6. Rolling mill 7. Carbon oxygen manipulator

• 8. Relevant inspection & testing facility

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLO

• as per file attached

• as per file attached

STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(REAFFIRMED 2003) (FIRST REV.) (TAB-5) MATCHING WITH SSC.MATERIAL TO FREE FROM CRACKES AND OTHER SURFACE DEFECTSAFTER 100% MAGANETIC CRACK DETECTION.

STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(REAFFIRMED 2003) (FIRST REV.) (TAB-5) MATCHING WITH SSC.MATERIAL TO FREE FROM CRACKES AND OTHER SURFACE DEFECTSAFTER 100% MAGANETIC CRACK DETECTION.

STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(REAFFIRMED 20

• file attached

• file attached

STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st Rev)SURFACE COND.OF MATERIAL SHOULD BE AS PER IS:9550- 2001 (1st REV.)(REAFFIRMED 2015).

STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st Rev)SURFACE COND.OF MATERIAL SHOULD BE AS PER IS:9550- 2001 (1st REV.)(REAFFIRMED 2015).

STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st Rev)SURFACE

• uploaded soon

• uploaded soon

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

• WILL BE UPLOADED

• WILL BE UPLOADED

MS ROD 64MM IS-1570 GR.25C4

MS ROD 64MM IS-1570 GR.25C4

MS ROD 64MM IS-1570 GR.25C4

STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.

STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.

STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.

• as per file attached

• as per file attached

SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN.

SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN.

SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN.

• as per file attached

• as per file attached