HEAD IMMOBILIZER MAKE: ME BER s.r.1., via LANGHIRANO ,270 43100 FONTANINI (PARAMA), ITALI., MODEL: ART 625 "XEROS" ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER
Specification
HEAD IMMOBILIZER MAKE: ME BER s.r.1., via LANGHIRANO ,270 43100 FONTANINI (PARAMA), ITALI., MODEL: ART 625 "XEROS" ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
40
16
Number
29876
3183000339
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
BARREL SUB ASSY.DRG NO.TGG-100(DC.09/005/13) CONSISTING OF BARREL,DRG NO.TGG-101(DC.09/001/18),UPPER BLOCK BARREL DRG.NO.TGG-102(DC.09/022/14),LOWER BLOCK BARREL,DRG NO- TGG-103(DC.09/022/14) AND PIN UPPER/LOWER BLOCK BARREL,DRG NO.TGG-107 FOR TEAR GAS GUN
Specification
BARREL SUB ASSY.DRG NO.TGG-100(DC.09/005/13) CONSISTING OF BARREL,DRG NO.TGG-101(DC.09/001/18),UPPER BLOCK BARREL DRG.NO.TGG-102(DC.09/022/14),LOWER BLOCK BARREL,DRG NO- TGG-103(DC.09/022/14) AND PIN UPPER/LOWER BLOCK BARREL,DRG NO.TGG-107 FOR TEAR GAS GUN
FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2FOR PLT.1&NILFOR PLT.2.TP TO BE CONFORM 250 TO300HV AFTER HT
Specification
FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2FOR PLT.1&NILFOR PLT.2.TP TO BE CONFORM 250 TO300HV AFTER HT
BALLISTIC EVALUATION OF MOTOR FOR BPC (5b-84)/PECHORA PROPELLANT FIRING AS PER DRAWING NO. NAI(J) SKETCH NO. 125, CHAMBER (BEM TUBE) DRG. NAI(J) 125/1, FRONT END LID DRG. NAI(J) 125/2, NOZZLE END LID DRG. NAI(J) 125/3.
Specification
BALLISTIC EVALUATION OF MOTOR FOR BPC (5b-84)/PECHORA PROPELLANT FIRING AS PER DRAWING NO. NAI(J) SKETCH NO. 125, CHAMBER (BEM TUBE) DRG. NAI(J) 125/1, FRONT END LID DRG. NAI(J) 125/2, NOZZLE END LID DRG. NAI(J) 125/3.
ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.
Specification
ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.
Drawing no.
ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN
Manufacturing Technology
Testing / Inspection Facility
06
AS PER REQUIREMENT
Kilogram
29892
107/028/PV(A)/TE1800000052/18-19/71
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
AL. ROD 22 MM +/-0.1 MM DIA TO SPECN. IS:733 DESIG. 24345 IN"WP" CONDITION WITH PGG 2.5 MM ON RADIUS (MAX) IN THE LENGTH OF 2 MTRS TO 3 MTRS . ULTRASONIC EXAMINATION OF THE ROD TO BE DONE
Specification
AL. ROD 22 MM +/-0.1 MM DIA TO SPECN. IS:733 DESIG. 24345 IN"WP" CONDITION WITH PGG 2.5 MM ON RADIUS (MAX) IN THE LENGTH OF 2 MTRS TO 3 MTRS . ULTRASONIC EXAMINATION OF THE ROD TO BE DONE
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
06
1685 KG
Number
29893
MPF/PV/MTA/OTE/18TE230242
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
Specification
BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification
BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Specification
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
Drawing no.
BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Drawing no.
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.
Specification
BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING300MM MIN. & MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST(CHEMICAL & PHYSICAL PROPERTY) AND PRACTICAL TRIAL ONHORIZONTAL PROGRESSIVE POWER PRESS FOR CONFIRMING HOMOGENEITY ETC.AT OFK.
BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
Specification
BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
Specification
BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90
Specification
BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO 90
COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification
COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
Specification
BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
Specification
BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN &MUST BE SMOOTH,CLEANED & PACKED PROPERLY TO AVOIDDAMAGE.MATERIAL WOULD BE ACCEPETED BASED ON LAB TEST ANDMACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
