PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

• WILL BE UPLOADED

• WILL BE UPLOADED

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

• uploaded

• uploaded

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

• TO BE UPLOADED

• TO BE UPLOADED

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SLIDING RING TO DRG.NO.TRD-1-2-2264.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SPACER TO DRG.NO.TRD-2-2-2273.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

SPRING TO DRG NO.301100269.

• attached

• attached

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

SPRING WASHER TO DRG.NO.TRD-1-2-2267.

• uploaded soon

• uploaded soon

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

SUPPORTING RING TO DRG.NO.TRD-2-2-2272.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14.

• attached

• attached

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

• uploaded soon

• uploaded soon

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE FOR PROOF 67 NOS.NOTE 3:-In case any Fuze lot fails in filled proof or if anyout turn lot of ammunation assembled with passed fuze lotfails in OTL proof due to reasons attributable to fuze,the supplier will be responsible for replacement of fullquantity (supplied duly passed at empty stage) of the fuzelot.CQA(A) Kirkee pune vide their L/No.QA11072/CR/XIIIDT.23/05/2016 has intimated that rectification/repairshould not be permitted for items procured from trade firms.

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE FOR PROOF 67 NOS.NOTE 3:-In case any Fuze lot fails in filled proof or if anyout turn lot of ammunation assembled with passed fuze lotfails in OTL proof due to reasons attributable to fuze,the supplier will be responsible for replacement of fullquantity (supplied duly passed at empty stage) of the fuzelot.CQA(A) Kirkee pune vide their L/No.QA11072/CR/XIIIDT.23/05/2016 has intimated that rectification/repairshould not be permitted for items procured from trade firms.

TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.NOTE 2:-ADVA

• as per file attached

• as per file attached

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.

• as per file attached

• as per file attached

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.

• attached

• attached

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87.

• as per file attached

• as per file attached

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

• uploaded soon

• uploaded soon

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23

• TO BE UPLOADED

• TO BE UPLOADED

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01

• as per file attached

• as per file attached

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91

• as per(1) Suitable Lathe machine, (2) Milling Machine (3) Press Machine (4) Welding facility (5) Phosphating facility (6) Stoving facility (7) Tin Plating facility (8) Soldering facility (9) Painting facility (10) Relevant Inspection & Testing facility. attachment

• (1) Suitable Lathe machine, (2) Milling Machine (3) Press Machine (4) Welding facility (5) Phosphating facility (6) Stoving facility (7) Tin Plating facility (8) Soldering facility (9) Painting facility (10) Relevant Inspection & Testing facility.

'O' RING 78X2 (2013436144)

'O' RING 78X2 (2013436144)

'O' RING 78X2 (2013436144)

• (I) Rubber moulding facility (II) Dimension measuring facility

• (III) Relevant inspection & testing facility

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

PHENOLIC LAMINATED SHEET PACKING PIECES TO SPECN: IS-2036-1995 SECOND REVISION Gr.P2 AS PER AAIW DRG.NO. AAIW-1087 R.N. 6 DT. 27/05/11

• attached

• attached

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.

• as per file attached

• as per file attached

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.

• as per file attached

• as per file attached

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002

• as per file attached

• as per file attached

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.

• as per file attached

• as per file attached

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

• as per file attached

• as per file attached

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

"O"RING DIA 61X2 TO DRG NO-F1301-055320-C DC NO 36783-A DT.19/9/01 TO SPECN-AQL-TABLE F1301-903210C DT 15/12/77MATERIAL SPECN-VULCANISED CHLROPRENE RUBBER COMPOUND TOSPECN-IND/ME/884:2015 COMPOUND NO C-60 HARDNESS DEGREE BS-60+5/-4 COMPATIBLE WITH RDX/TNT DC.NO.5403-ME DT.1-02-2016

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.

• (I) Rubber moulding facility (II) Dimension measuring facility

• (III) Relevant inspection & testing facility

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

• as per file attached

• as per file attached

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

• as per file attached

• as per file attached

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.

• upload

• upload

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016

• attached

• attached

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

• attached

• attached

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.

• as per file attached

• as per file attached

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014.

• as per file attached

• as per file attached

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.

• uploaded soon

• uploaded soon

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWOOD GRADE BWR TYPE AA 12 MM TO 13 MM THICK X 7 PLY X 1.2M X 1.2 M TO SPECN: IS-303-1989 (THIRD REVISION) AMENDMENTNo.1 OF NOV 1992.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PLYWPOOD GRADE BWR TYPE AA SIZE 1.2M X 1.2M X 9 PLY X 19MM THICK TO SPECN.I S :303=1989.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

• (i) Rubber Mixing Mill or Kneading M/C (ii) Extruder m/c (iii) Pulverizing m/c (iv) Roto Moulding Process / plastic injection moulding m/c (v) Grinder (vi) Drill Machine

• (vii) Other relevant Inspection & Testing facility

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).

• (I) FORGING FACILITY (II) CNC/ LATHE MACHINE (III) HEAT TREATMENT FACILITY

• (IV) RELEVANT INSPECTION & TESTING FACILITY

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3685-ME dt.19-03-2001(3rd Rev) reaffirmed 2002(as applicable for defence use)

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3685-ME dt.19-03-2001(3rd Rev) reaffirmed 2002(as applicable for defence use)

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3

• as per file attached

• as per file attached

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.1

• as per file attached

• as per file attached

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576-A.AIDE MEMOIRE-P/11NOTE(1):-SPECIAL INSTRUCTION FOR TEST FOR BOX H-60 IS ENCLOSED.NOTE(2):-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576-A.AIDE MEMOIRE-P/11NOTE(1):-SPECIAL INSTRUCTION FOR TEST FOR BOX H-60 IS ENCLOSED.NOTE(2):-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

AS MENTIONED IN ITEM DESCRIPTION

• attached

• attached

ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94

ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94

ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94

• as per file attached

• as per file attached

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS.

• attached

• attached

MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLDRG 971 DET.NO.1 R.NO.6 DATE 31/01/08.

MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLDRG 971 DET.NO.1 R.NO.6 DATE 31/01/08.

MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLDRG 971 DET.N

• as per file attached

• as per file attached

RIGHT BRACKET 172 04 592

RIGHT BRACKET 172 04 592

172.04.592

REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N. D.A. NO. 09/11, DT. 26.04.11

REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N. D.A. NO. 09/11, DT. 26.04.11

DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA

INVESTMENT CASTING TO DRG.NO.SK-3411*1(IC FOR CAM CYLINDER) D.A. NO. 10/10 DT. 11-5-10

AS PER DRG.

DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

DRG NO SK-5377R*1

For more details regarding tender visit www.ofbeproc.gov.in

For more details regarding tender visit www.ofbeproc.gov.in

For more details regarding tender visit www.ofbeproc.gov.in

• For more details regarding tender visit www.ofbeproc.gov.in

• For more details regarding tender visit www.ofbeproc.gov.in

DRG NO CO-433/B FOR 84MM RL MK-II

DRG NO CO-433/B FOR 84MM RL MK-II

TRACER NUT AS PER ARDE DRG NO.:1006 13 21 00 02 000 00TA

As per enclosed Monitoring Instruction & QAP Documnet

A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110: 2021 (REVISION NO. 5).

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

• MSME

• POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

CONTACT SLIDER ASSY. DRG.NO: TS-16 (2A46-CB-21-16CB)

CONTACT SLIDER ASSY. DRG.NO: TS-16 (2A46-CB-21-16CB)

DRG.NO: TS-16 (2A46-CB-21-16CB)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

MCT-2954/1 AND MCT-2976/1 1/SET EACH

INVESTMENT CASTING FOR BODY TO DRG.NO.ODD/C/905/3

INVESTMENT CASTING FOR BODY TO DRG.NO.ODD/C/905/3

DRG.NO.ODD/C/905/3

DETAILED TECHNICAL DESCRIPTION AND OPERATION INSTRUCTION FOR TAR RIFLE

AS PER SPECIFICATION

USER AND MAINTENANCE MANUAL FOR TAR RIFLE

AS PER SPECIFICATION

Development of Fire Control System and Related Sub System of Kavach MOD II as per specification and Scope of Work

Development of Fire Control System and Related Sub System of Kavach MOD II as per specification and Scope of Work

Electrical Sub System for Kavach MOD II with Onboard Spares with Technical Specification as per Annexure A and B and Scope of Work as per Annexure X

Electrical Sub System for Kavach MOD II with Onboard Spares with Technical Specification as per Annexure A and B and Scope of Work as per Annexure X

GLASS SLAB K-108

RADIATION RASISTANT GLASS K-108, SLAB SIZE 200TO360 X 140TO 250 X 40TO75 MM, GLASS DENSITY 2.52 GRM/CC, REFRACTIVE IND 1.516373 ABBE VALUE 64.07 , OTHER CHARACTERISTICS AS PER SPEC. NO. OLF/OPT-GLASS/SPEC/03-2

chrome tanned black buff din apollo leather embassed full grain leather, thickness 2+0.2mm

as per requirement

soft plain leather thickness 1+0.2mm

as per requirement

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

STEEL BAR 80MM DIA, HOT WROUGHT (ELECTRIC FURNACE STEEL), VACUUM DEGASSED, OILED AS PER ASTM-A322/A29, GRADE 4340 00, ANNEALED; 225 HB MAX; (OR) 270-300 HB QUENCHED + TEMPERED VACUUM DEGASSED, MAGNETIC PARTICLE INSPECTED AS PER AMS:2301F WITH AVERAGE CLEANLINESS OF; 0.32-0.24, 100% ULTRASONIC INSPECTION AS PER MIL STD 2154, CLASS:A, TYPE:1, SIZE 80.00 (+1.2/-0.0)MM DIA; TO BE SUPPLIED IN THE LENGTH OF 3M.

AS PER ASTM A322-91 GRADE 4340

JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL

AS PER DRG No K 9023 WITH FIRMS MATERIAL

K 9023

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUARD TRIGGER AS PER DRG No K 1104 WITH FIRMS MATERIAL

AS PER DRG No K 1104 WITH FIRMS MATERIAL

K 1104