A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

A SET OF FIVE MATCH FUZEE SAFETY TO DRG NO ERDL-1084 DET.7 (CONSISTING OF DET.8,9,10,11,12 AND 13)

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110: 2021 (REVISION NO. 5).

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

• MSME

• POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

CONTACT SLIDER ASSY. DRG.NO: TS-16 (2A46-CB-21-16CB)

CONTACT SLIDER ASSY. DRG.NO: TS-16 (2A46-CB-21-16CB)

DRG.NO: TS-16 (2A46-CB-21-16CB)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/SET.7)LENS XVI&XVII MCT1445 1/SE

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

SET OF LENSES FOR BINO 8X 30 R CONSISTING OF LENS OPTICAL INSTRUMENT MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

MCT-2973/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2977/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2980/1, 2/SET. LENS OPTICAL INSTRUMENT MCT-2981/1, 2/SET

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

SET OF FINISHED OPTICS CONSISTING OF PRISM OPTICAL INSTRUMENT MCT-2954/1 AND MCT-2976/1 1/SET EACH

MCT-2954/1 AND MCT-2976/1 1/SET EACH

INVESTMENT CASTING FOR BODY TO DRG.NO.ODD/C/905/3

INVESTMENT CASTING FOR BODY TO DRG.NO.ODD/C/905/3

DRG.NO.ODD/C/905/3

DETAILED TECHNICAL DESCRIPTION AND OPERATION INSTRUCTION FOR TAR RIFLE

AS PER SPECIFICATION

USER AND MAINTENANCE MANUAL FOR TAR RIFLE

AS PER SPECIFICATION

Development of Fire Control System and Related Sub System of Kavach MOD II as per specification and Scope of Work

Development of Fire Control System and Related Sub System of Kavach MOD II as per specification and Scope of Work

Electrical Sub System for Kavach MOD II with Onboard Spares with Technical Specification as per Annexure A and B and Scope of Work as per Annexure X

Electrical Sub System for Kavach MOD II with Onboard Spares with Technical Specification as per Annexure A and B and Scope of Work as per Annexure X

GLASS SLAB K-108

RADIATION RASISTANT GLASS K-108, SLAB SIZE 200TO360 X 140TO 250 X 40TO75 MM, GLASS DENSITY 2.52 GRM/CC, REFRACTIVE IND 1.516373 ABBE VALUE 64.07 , OTHER CHARACTERISTICS AS PER SPEC. NO. OLF/OPT-GLASS/SPEC/03-2

chrome tanned black buff din apollo leather embassed full grain leather, thickness 2+0.2mm

as per requirement

soft plain leather thickness 1+0.2mm

as per requirement

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

STEEL BAR 80MM DIA, HOT WROUGHT (ELECTRIC FURNACE STEEL), VACUUM DEGASSED, OILED AS PER ASTM-A322/A29, GRADE 4340 00, ANNEALED; 225 HB MAX; (OR) 270-300 HB QUENCHED + TEMPERED VACUUM DEGASSED, MAGNETIC PARTICLE INSPECTED AS PER AMS:2301F WITH AVERAGE CLEANLINESS OF; 0.32-0.24, 100% ULTRASONIC INSPECTION AS PER MIL STD 2154, CLASS:A, TYPE:1, SIZE 80.00 (+1.2/-0.0)MM DIA; TO BE SUPPLIED IN THE LENGTH OF 3M.

AS PER ASTM A322-91 GRADE 4340

JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL

AS PER DRG No K 9023 WITH FIRMS MATERIAL

K 9023

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUARD TRIGGER AS PER DRG No K 1104 WITH FIRMS MATERIAL

AS PER DRG No K 1104 WITH FIRMS MATERIAL

K 1104

SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL

AS PER DRG NO. K 2023

K 2023

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TIN FOIL FOR M-91

Specification/Drawing No. OFN/BMCS/M-91/M-92/TIN FOIL

Specification/Drawing No. OFN/BMCS/M-91/M-92/TIN FOIL

TAPE TEXTILE NYLON 43 MM U D BS 9000 N

SPECIFICATION NO. ADRDE/SPECN/ 1985/27(b). ROLL LENGTH 55 MTR. EXCLUDING SAMPLING

SPECIFICATION NO. ADRDE/SPECN/ 1985/27(b). ROLL LENGTH 55 MTR. EXCLUDING SAMPLING

STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130 MM L

STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130 MM L

01

S S RODS BRIGHT GRADE AISI 316 SIZE 18 MM DIA- 500 MML

S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA- 500 MML

• AS PER ATTACHMENT

• AS PER ATTACHMENT

S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML

S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML

• AS PER ATTACHMENT

• AS PER ATTACHMENT

S. S. SEAMLESS PIPE GRADE 316/316 L. SIZE 127 MM OD X 95 MM IDX 900 MML

S. S. SEAMLESS PIPE GRADE 316/316 L. SIZE 127 MM OD X 95 MM IDX 900 MML

SMOOTH GLASS SHEET LK 105 LF 2612827409

SLAB SIZE 360 X 360 X 7 MM

INDUCTION HARDENING OF TORSION SHAFT LEFT OR RIGHT OF 130 MM

INDUCTION HARDENING OF TORSION SHAFT LEFT OR RIGHT OF 130 MM

STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D

STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D

STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D

SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV

SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV

MCT-3115

X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED,HIGH CONTRAST,ASTM CL.2 TECHNICAL REQUIREMENTS: THE FILM WILL BE USED FOR X-RAYING HIGH CALIBER HE FILLED SHELLS.FILM SHOULD BE ABLE TO DETECT FILLING DEFECT SUCH AS POROSITY,CAVITY,PIPING & CRACKS OF MINIMUM 0.1 SQ.MM WITH ENERGY SOURCES 320 KV,2 MeV,4 MeV & 6 MeV WITH X-RAY FILM AUTO PROCESSOR.

X RAY FILM SHEET 30 CM X 40 CM INDUSTRIAL INTERLEAVED,100SPEED,HIGH CONTRAST,ASTM CL.2 TECHNICAL REQUIREMENTS: THE FILM WILL BE USED FOR X-RAYING HIGH CALIBER HE FILLED SHELLS.FILM SHOULD BE ABLE TO DETECT FILLING DEFECT SUCH AS POROSITY,CAVITY,PIPING & CRACKS OF MINIMUM 0.1 SQ.MM WITH ENERGY SOURCES 320 KV,2 MeV,4 MeV & 6 MeV WITH X-RAY FILM AUTO PROCESSOR.

• AS PER STANDARD NORMS OR TE.NDER DOCUMENT

• AS PER TENDER

SOCKET .2RMD39KPZ45G2V1 TY-364-126

TY-364-126

SOCKET,2RM24KUZ19G1V1 TY-364-126

TY-364-126

SOCKET 2RM42KPE50G2V1 TO GEO 364-126TY DATE OF MANUFACTURING SHOULD BE MENTIONED ON THE PRODUCT. ITEM SHOULD NOT BE MORE THAN 2 YEARS OLD.

GEO 364-126 TY

SOCKET 2RMD30KPE8G7V1L

GEO 364-107

REAR RUBBER SEAL FOR 125MM FSAPDS DOP 550

SILICON RUBBER TO SPEC. DTD 818 CLASS "L"-3.

PLATE DRG NO AL8075019 LF NO 7440206011

PLATE DRG NO AL8075019 LF NO 7440206011

al8.075.019

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

LEVER AS PER DRG NO AL8.332.153 (LF 7440206004)

LEVER AS PER DRG NO AL8.332.153 (LF 7440206004)

SHAFT AS PER DRG NO AL8314523 (LF 7440206002)

SHAFT AS PER DRG NO AL8314523 (LF 7440206002)

FLANGE AS PER DRG NO IUMK711358001 (LF 7440205999)

FLANGE AS PER DRG NO IUMK711358001 (LF 7440205999)

RING AS PER DRG NO AL8245090 (LF 7440205991)

RING AS PER DRG NO AL8245090 (LF 7440205991)

SHAFT AS PER DRG NO AL8307088 (LF 7440205990)

SHAFT AS PER DRG NO AL8307088 (LF 7440205990)

STOP AS PER DRG NO AL8367078 (LF 7440205989)

STOP AS PER DRG NO AL8367078 (LF 7440205989)

AXLE AS PER DRG NO AL8319088 (LF 7440200903)

AXLE AS PER DRG NO AL8319088 (LF 7440200903)

AXLE FOR STABILIZER 1G46 TO DRG NO AL8314746 (LF 7440200742)

AXLE FOR STABILIZER 1G46 TO DRG NO AL8314746 (LF 7440200742)

BUSH FOR STABILIZER IG46 TO DRG NO AL8228308 (LF 7440200736)

BUSH FOR STABILIZER IG46 TO DRG NO AL8228308 (LF 7440200736)

BODY TO DRG NO M2612101 (LF 7432111051)

BODY TO DRG NO M2612101 (LF 7432111051)

AIR VALVE FOR RECEE BOAT

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

IMSA-0049/A (IMPD -0429/A, IMPD -0430/A, IMPD -0431/A, IMPD -0432, IMPD -0433/A, IMPD -0434, IMPD -0435, IMPD -0436/A, IMPD - 0437)

Webbing Nylon 44 mm OG

Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:- 1. Count of yarn- 840 denier high tenacity nylon yarn. 2. width- 44 mm +- 1.5 mm 3. thickness - 1.1 mm (min) to 2.0 mm (max) 4.breaking strength - 1815 Kgs (min)

STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 AS ROLLED OR FORGED NORMALIZED. SIZE 160 PLUS 5 OR MINUS 0 0 MM DIA PARTED IN LENGTH OF 410 PLUS OT MINUS 5MM FOR MANUFACTURING OF 155MM ERFB SLUG. MATERIAL SHALL BE PROOF MACHINED AND ULTRASONIC TESTED FOR INTERNAL CRACKS.

SPECN JSS 9510 01 1982

COVER STEEL CASTING TO DRG NO 4028892 2 BS 3100 1976 GR A 2 OILPROOF MATL

COVER STEEL CASTING TO DRG NO 4028892 2 BS 3100 1976 GR A 2 OILPROOF MATL

4028892 2 BS 3100 1976 GR A 2

3-15X50 TELESCOPE FOR 7.62X51MM SNIPER RIFLE.DETAIL SPECIFI-CATIONS AS PER ANNEXURE-A.

3-15X50 TELESCOPE FOR 7.62X51MM SNIPER RIFLE.DETAIL SPECIFI-CATIONS AS PER ANNEXURE-A.

SPECIFI-CATIONS AS PER ANNEXURE-A.

LENS ASSEMBLY LF 2690000025

DRG. NO. AF5938193

LENS FINISHED LF 7420400016

DRG. NO. BSH7538010

• FIRM SHOULD SUBMIT DETAILS OF MANUFACTURING FACILITIES FOR SUBJECT ITEM

• FIRM SHOULD SUBMIT DETAILS OF TESTING/INSPECTION FACILITIES FOR SUBJECT ITEM

AS PER SPECIFICATION

DRG. NO.ADRDE/1402-08

DRG. NO.ADRDE/1402-08

PYT FORGING FOR EXTERNAL CYLINDER AS PER GSF DRG NO 2152 A FOR 73 BMP (I/C-7133110531)

PYT FORGING FOR EXTERNAL CYLINDER AS PER GSF DRG NO 2152 A FOR 73 BMP (I/C-7133110531)

F-2152 A

FOLDING OARS/ PADDLES

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

IMSA-0151/A (IMPD-0385/B, IMPD-0386/A, IMPD-0387/A, IMPD-0438, IMPD-0439, IMPD-0440/B) and Sprcn No. CQAE/ 1940/1419/a and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/1520(b):2006

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY.

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY.

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY.

SPECIFICATION NO. IS : 536-1968

SPECIFICATION NO. IS : 536-1968

SET OF STOCK RT & STOCK LT DRG CTM-0138 & CTM-0137

AS PER DRAWING

KEEL IN 3 PIECES

IMSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A) and As per Clause 5.6 and 5.7 of Specn No. CQAE/1940/ 1520(b):2006

MSA-0046/B (IMPD-0418/1A, IMPD-0419/1A, IMPD-0420/A)

OBM BRACKET ASSEMBLY IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006

IMPD-0409/B

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

SPECIFICATION IS 12444:1988

• Refer to attachment
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• Refer to attachmentAS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.

EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.

4081489

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

TOGGLE WOOD Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

Item no. 35 of Drawing No. IMGA-0067/1 (B) Sheet 2 of 3

PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476.

PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476.

4081488

As per drawing

As per drawing

SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Flash Eliminator Lighter for Excalibur

Flash Eliminator Lighter for Excalibur

RFI/SK. 9778

Specification - SPECIFICATION NO. IAFS 01068:2015AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

Specification - SPECIFICATION NO. IAFS 01068:2015AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09-06-2017 for MPF Sl no 1 for Reserve Battery for Fuze FB-40

Battery PX20 Drg.No 100 016 7 Battery IM0002

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09-06-2017 for MPF Sl no 2 for Hub Reduction Gear

Hub Reduction Gear consisting of Left and Right Wheel Hub Assembly to ZFPart No.4464006250

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09 06 2017 for MPF Sl No MPF 13 for GLAND TO DRG NO 54 08 016CB

GLAND TO DRG NO 54 08 016CB

54 08 016CB

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09 06 2017 for MPF Sl No MPF 12 for PACKING RING TO DRG NO 175 47 019

PACKING RING TO DRG NO 175 47 019

175 47 019

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09 06 2017 for MPF Sl No MPF 11 for PACKING RING TO DRG NO 175 47 020

PACKING RING TO DRG NO 175 47 020

175 47 020

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09 06 2017 for MPF Sl No MPF 10 for PACKING RING TO DRG NO 175 45 120

PACKING RING TO DRG NO 175 45 120

175 45 120

Advertisement against OFB RFI for Import Substitution of Items uploaded on OFB internet website on 09 06 2017 for MPF Sl No MPF 9 for PACKING RING TO DRG NO 172 40 027

PACKING RING TO DRG NO 172 40 027

172 40 027