HOLDER AS PER DRG NO IUMK713551.003 (LF 7445108206)

HOLDER AS PER DRG NO IUMK713551.003 (LF 7445108206)

FRAME FOR PROTECTIVE GLASS BL9.319.217 (LF 7440202712)

FRAME FOR PROTECTIVE GLASS BL9.319.217 (LF 7440202712)

STEM FINISHED TO DRG NO BSH8126170 (LF 7434011004)

STEM FINISHED TO DRG NO BSH8126170 (LF 7434011004)

SPACER IV TO DRG NO OLF/R&D/TVNE-4B/1PA/238 M3 (LF 7432511050)

SPACER IV TO DRG NO OLF/R&D/TVNE-4B/1PA/238 M3 (LF 7432511050)

CLAMP TO DRG NO AF8667322 (LF 7432412011)

CLAMP TO DRG NO AF8667322 (LF 7432412011)

FLANGE TO DRG NO BSH8230198 (LF 7432111055)

FLANGE TO DRG NO BSH8230198 (LF 7432111055)

AFT CLOSURE TO DRG.NO.4101894.

AFT CLOSURE TO DRG.NO.4101894.

AFT CLOSURE TO DRG.NO.4101894.

• as per file attached

• as per file attached

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

• as per file attached

• as per file attached

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

• as per file attached

• as per file attached

SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.1-2-2191 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-2197 & (6) ISOLATOR TRD NO.2-2-2202.

SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.1-2-2191 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-2197 & (6) ISOLATOR TRD NO.2-2-2202.

• as per file attached

• as per file attached

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

• as per file attached

• as per file attached

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

• as per file attached

• as per file attached

AFT CLOSURE ASSEMBLY(FILLED)TO DRG.NO.6413210.

AFT CLOSURE ASSEMBLY(FILLED)TO DRG.NO.6413210.

AFT CLOSURE ASSEMBLY(FILLED)TO DRG.NO.6413210.

PLUNGER TO DRG.NO.5209566.

PLUNGER TO DRG.NO.5209566.

PLUNGER TO DRG.NO.5209566.

• as per file attached

• as per file attached

ARMING DEVICE FOR FUZE SYSTEM 551 MARKED TO DRG NO.4113 189.OR DRG NO.TRD-2-2-2181.

ARMING DEVICE FOR FUZE SYSTEM 551 MARKED TO DRG NO.4113 189.OR DRG NO.TRD-2-2-2181.

ARMING DEVICE FOR FUZE SYSTEM 551 MARKED TO DRG NO.4113 189.OR DRG NO.TRD-2-2-2181.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

• as per file attached

• as per file attached

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.

• WILL BE UPLOADED

• WILL BE UPLOADED

CAP 5.7MM FOR 84MM HEAT FFV 551 AMMN. TO DRG NO.6409799 ,SPECN NO. 0809784 .

CAP 5.7MM FOR 84MM HEAT FFV 551 AMMN. TO DRG NO.6409799 ,SPECN NO. 0809784 .

CAP 5.7MM FOR 84MM HEAT FFV 551 AMMN. TO DRG NO.6409799 ,SPECN NO. 0809784 .

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

• attached

• attached

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

SPIRAL TO DRG.NO.---8.367.009 (2 SHEETS) SHEET NO.1 DC-37271-A DT. 08/11/10,SHEET NO.2 DC-35030-A DT 22-02-91.

• uploaded soon

• uploaded soon

N8T DETONATOR -ARTICLE NO./DOC.NO.1182584/N8T DETONATOR TO DRG NO. TRD-212349

N8T DETONATOR -ARTICLE NO./DOC.NO.1182584/N8T DETONATOR TO DRG NO. TRD-212349

N8T DETONATOR -ARTICLE NO./DOC.NO.1182584/N8T DETONATOR TO DRG NO. TRD-212349

• attached

• attached

ASSEMBLY S&A (FILLED) TO DRG.NO.366.990.1

ASSEMBLY S&A (FILLED) TO DRG.NO.366.990.1

ASSEMBLY S&A (FILLED) TO DRG.NO.366.990.1

• as per file attached

• as per file attached

Modified first aid box

Modified first aid box

115-31-0125/A

Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A

Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A

CASTING FOR BUSH TO DRG. NO. 2A46.21.55-2 FOR HAND ELEV. MACHANISM/T-72

CASTING FOR BUSH TO DRG. NO. 2A46.21.55-2 FOR HAND ELEV. MACHANISM/T-72

As per Drg.

As per Drg.

BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV.

BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV.

675-58-80

AUDIO VISUAL WARNING DEVICE FOR HIGH TEMPERATURE OF ENGINE COOLANT AND LOW PRESSURE OF ENGINE OIL, AS PER ENCLOSED SPECIFICATION

AUDIO VISUAL WARNING DEVICE FOR HIGH TEMPERATURE OF ENGINE COOLANT AND LOW PRESSURE OF ENGINE OIL, AS PER ENCLOSED SPECIFICATION

SET OF PNEUMATIC CYLINDER & ITS ACCESSORIES AS PER LIST ENCLOSED. (SPECIFICATION NO. VFJ/VDO/SP/PNEUMATIC CYLINDERS FOR MPV)

(SPECIFICATION NO. VFJ/VDO/SP/PNEUMATIC CYLINDERS FOR MPV)

Fire Extinguisher (Withmounting arrangement vertically)

Fire Extinguisher (Withmounting arrangement vertically) Part No X7423400

SIDE VIEW MIRROR SIZE 15" X 7" (L.H. 1 NO. & R.H. 1 NO.) LUMAX MAKE PART NO. SVM-003

SIDE VIEW MIRROR SIZE 15" X 7" (L.H. 1 NO. & R.H. 1 NO.) LUMAX MAKE PART NO. SVM-003

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

LIQUID GASKET ANABOND-673 TWO CARTRIDGES OF 350 GMS EACH C-5026016 OR EQUIVALENT

HOSE. X3954500-VI

HOSE Part No X3954500-V1

HOSE X3915000-VI

HOSE Part No X3915000

QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530

QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530

TAIL LAMP RH-4WAY (TATA 407) LUMAX MAKE PT NO. MODEL NO. 1300

TAIL LAMP RH-4WAY (TATA 407) LUMAX MAKE PT NO. MODEL NO. 1300

TAIL LAMP LH-4WAY (TATA 407) LUMAX MAKE PT NO. MODEL NO. 1300

TAIL LAMP LH-4WAY (TATA 407) LUMAX MAKE PT NO. MODEL NO. 1300

HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)

HEAD LAMP RH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS, PT. NO. LHLT-201RH OR LUMAX PT. NO.005-HLA-R

HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W)

HEAD LAMP LH RECTANGULAR WITH HALOGEN BULB (24V, 70/75W) AND PARKING BULB (24V, 4W) MAKE LISPARTS PT. NO. LHLT-201LH OR LUMAX PT NO. 005-HLA-L

SLEEVE

SLEEVE

610-01-1205-1/C

PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE

10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE

SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)

SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)

765-50-2784-B

Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.

Hex bolt 3/8 UNF 1 1/2" Bolt with sun lock nut and spring washer, high tensile.

STEPNEY MOUNTING BRACKET LH & RH

STEPNEY MOUNTING BRACKET LH & RH

640-01-7000-2/B

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

HINGE DRIVERS HATCH ASSY (FORGING)

HINGE DRIVERS HATCH ASSY (FORGING)

MPV/HULL/114/B

SUPPLY AND FIXING OF RESIN AND HARDENER TO ARREST WATER LEAKAGE FROM VARIOUS SUB ASSEMBLIES OF MPV (ARMY & MHA) AS PER ENCLOSED SCOPE OF WORK

SCOPE OF WORK

AS PER DRG SK-5375R*3

AS PER DRG SK-5375R*3 D.A. NO. 35/08 DT. 12 05 08

As per Drg.

As per Drg.

FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR

SPECN NO ADRDE/SPECN/1983/14

Elastic Tape White 40mm Specification No. IS:9686-1980(Re-affirmed 2017)

Elastic Tape White 40mm Specification No. IS:9686-1980(Re-affirmed 2017)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

FLANGE 675-58-222

FLANGE 675-58-222

675-58-222

CQA ICV SET 028

CQA ICV SET 028

CQA ICV SET 028

TRAY ASSEMBLY

TRAY ASSEMBLY

675-64-CD300

GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL

AS PER DRG No K 2031

K 2031

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL

AS PER DRG NO K 4008

K 4008

FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL

AS PER DRG NO K 2072

K 2072

REAR WASHER AS PER DRG NO K 2073 WITH FIRMS MATERIAL

AS PER DRG NO K 2073

K 2073

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI

DRG. NO. SK-5574R

Catch Trigger to DRG No. PHMK-III-7-2

Catch Trigger to DRG No. PHMK-III-7-2

DRG No. PHMK-III-7-2

PHMK-1-32 ALT

PHMK-1-32 ALT

BORE WEAR REDUCING LINER (BWRL) FOR M-92 OF 155MM BMCS MODULES

AS PER ATTACHED FILE

OFN/BMCS/M-92/BWRL

CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION

CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION

DRG NO.PHMK-II-6-4

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET

• uploaded soon

• uploaded soon

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR SET OF CARRIER 4A/L AND CARRIER 5A/L IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 SETS ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A,AIDE MEMOIRE P/11NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR SET OF CARRIER 4A/L AND CARRIER 5A/L IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 SETS ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEE

• as per file attached

• as per file attached

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.

• WILL BE UPLOADED

• WILL BE UPLOADED

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA INSPECTOR.

• attached

• attached

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)BODY DESIG.REF.2738 DC No.37116-A dt.20-06-07(4)LID DESIG.REF.2739 DC No.34346-A dt.21-03-88(5)SEAR DESIG.REF.2740 DC No.34346-A dt.21-03-88(6)STRIKER DESIG.REF.2741 DC No. 34346-A dt.21-03-88(7)PIN(SEAR) DESIG.REF.2742 DC No.31545-A(8)PIN(LID) DESIG.REF.2743 DC No.31545-A

SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt.08-12-88(3)

• as per file attached

• as per file attached

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED

• as per file attached

• as per file attached

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

• as per file attached

• as per file attached

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.

• as per file attached

• as per file attached

19 Type of springs

19 Type of springs relevant details(Annexures and Drawings) regarding tender is available at www.ofbeproc.gov.in

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LISTOF COMPONENTS ENCLOSED.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER SPECN:-IND/ME/884:2015 COMPOUND NO C-70+/- 5/4 DC NO.5403-ME DT.01/02/2016.

BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOPRENE) RUBBER

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION.

BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILAT

• as per file attached

• as per file attached

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATI

• as per file attached

• as per file attached

IS:190-1991 , IS:5247 pt-I&II

IS:190-1991 , IS:5247 pt-I&II

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C

AS PER DRAWING

CO-437

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

• as per file attached

• as per file attached

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.

• as per file attached

• as per file attached