IS:1144-1988 EXCEPT THAT(i)Dye fast.to light shall bedeter.by carbon arc&this shall be at least classV or better(ii)MK shade to be dyed with Iron&chr.salts in suit.propo.asper note clause 2of spec.(iii)Firm shall get their name/trade mark wov.along the sel.in run.in length not exc.a dist.of30cms bet.two mark.The col.of yarn used for mark.should be same as that of basic fab.The wid.of sel.should not exce.0.8cmAs per schedule No. CQA(T&C)/PMS/35(d)

IS:1144-1988 EXCEPT THAT(i)Dye fast.to light shall bedeter.by carbon arc&this shall be at least classV or better(ii)MK shade to be dyed with Iron&chr.salts in suit.propo.asper note clause 2of spec.(iii)Firm shall get their name/trade mark wov.along the sel.in run.in length not exc.a dist.of30cms bet.two mark.The col.of yarn used for mark.should be same as that of basic fab.The wid.of sel.should not exce.0.8cmAs per schedule No. CQA(T&C)/PMS/35(d)

MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).

AS PER DRG. NO. TEND 1692* (ICR 1576)

DRG. NO. TEND 1692* (ICR 1576)

COPPER NAPHTHENATE TO SPECN IS 1078-1987 (SECOND REVISION)

COPPER NAPHTHENATE TO SPECN IS 1078-1987 (SECOND REVISION)

• attached

• attached

CLOTH ALL WORSTED 54" WIDE TO SPECN: JSS-8305-20:2013 (REVISION NO.3)

JSS-8305-20:2013 (REVISION NO.3)

CHARCOAL TYPE -II SIZE 600 MICROMETRE IS SIEVE TO SPECN: JSS-6810-144:2003 DC NO.3782-ME DT.25-9-2003.

SPECN: JSS-6810-144:2003 DC NO.3782-ME DT.25-9-2003.

BORAX CRYSTAL PURE GRADE TO SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03

SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03

BARYTES TYPE-2 TO SPECN JSS-6810-51-2013 (REV.NO. 3) DC NO. 5195-ME DT.19-03-2014.

SPECN JSS-6810-51-2013 (REV.NO. 3) DC NO. 5195-ME DT.19-03-2014.

ANTIMONY SULPHIDE BLACK IN LUMP FORM TO SPECN:- JSS-6810-71 2008(REVISION NO.3)

SPECN:- JSS-6810-71 2008(REVISION NO.3)

• as per attachment

• as per attachment

ANIMAL GLUE FOR GENERAL WOOD-WORKING PURPOSE TO SPECN:- IS-852:1994 (2nd REVISION) (REAFFIRMED 2004 ) WITH CHLORIDECONTENT 1% MAXIMUM.

ANIMAL GLUE FOR GENERAL WOOD-WORKING PURPOSE TO SPECN:- IS-852:1994 (2nd REVISION) (REAFFIRMED 2004 ) WITH CHLORIDECONTENT 1% MAXIMUM.

AMMONIUM NITRATE GR-I SPECIAL TO SPECN: IND/ME/86 DC NO.3754-ME DT.12/12/2002

SPECN: IND/ME/86 DC NO.3754-ME DT.12/12/2002

PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011

PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011

• attached

• attached

SPIRIT RECTIFIED GR-I TO SPECN- IS-323-1959 (REVISED) (REAFFIRMED - 2005)

SPIRIT RECTIFIED GR-I TO SPECN- IS-323-1959 (REVISED) (REAFFIRMED - 2005)

SODIUM NITRATE GR-1 IS-SIEVE SIZE 125 MICROMETER TO SPECN:- JSS-6810-87:2011 (REVISION NO.2)

SODIUM NITRATE GR-1 IS-SIEVE SIZE 125 MICROMETER TO SPECN:- JSS-6810-87:2011 (REVISION NO.2)

SODIUM AZIDE TO SPECN.JSS-6810-79:2003 (REV.NO.1) (REAFF 2011) DC NO.5046-ME DT.15/12/2011

SODIUM AZIDE TO SPECN.JSS-6810-79:2003 (REV.NO.1) (REAFF 2011) DC NO.5046-ME DT.15/12/2011

• as per specn

• as per specn

FERRO SILICON TO SPECN:JSS-6810-130:2010(REVISION NO.2) SIZE : 63 MICROMETRE IS SIEVE.

FERRO SILICON TO SPECN:JSS-6810-130:2010(REVISION NO.2) SIZE : 63 MICROMETRE IS SIEVE.

PROCESSED JUTE FELT SOFT NEEDLED AND PROOFED, AMMUNITION 6.3MM THICK X 1320.8 MM WIDE TO SPECN: NO. IND/ME/889(PROV) DC 3754-ME DT 12/12/02.

IND/ME/889(PROV) DC 3754-ME DT 12/12/02.

CLOTH ALL WOOL MELTON FINISH (BOX CLOTH) TO SPECN:-JSS-8305-16:2014(REVISION NO.3) THICKNESS 1.15 TO 1.30 MM UNDER 1.10 KG LOAD AND COLOUR CREAM, WIDTH 140 CM WITH WATER PROOF AND FIRE RESISTANCE AS PER SPECN.NO F-1329-010120B.

CLOTH ALL WOOL MELTON FINISH (BOX CLOTH) TO SPECN:-JSS-8305-16:2014(REVISION NO.3)

CALCIUM SILICIDE 63 MICROMETER IS SIEVE TO SPECN.JSS-6810-107 :2013 (REV.NO.3) DC NO.5218-ME DT.12/4/2014

CALCIUM SILICIDE 63 MICROMETER IS SIEVE TO SPECN.JSS-6810-107 :2013 (REV.NO.3) DC NO.5218-ME DT.12/4/2014

SILVER CYANIDE FOR ELECTRO PLATING 99.99% PURE TO SPECN :- IS-6267-1971.

SPECN :- IS-6267-1971.

BITUMEN SPECIAL AMMUNITION IND/ME/136(b) DC NO.3500-ME DT.09/04/98.SOFTENING POINT OF BITUMEN SHOULD BE BETWEEN 84 DEGREE CENTIGRADE TO 90 DEGREE CENTIGRADE

BITUMEN SPECIAL AMMUNITION IND/ME/136(b) DC NO.3500-ME DT.09/04/98.SOFTENING POINT OF BITUMEN SHOULD BE BETWEEN 84 DEGREE CENTIGRADE TO 90 DEGREE CENTIGRADE

ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.

ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.

• as per file attached

• as per file attached

ALUMINIUM POWDER HEAVY GR-I TO SPECN: JSS-1370-03:2007 REVISION NO 3 SIEVE SIZE AS FOLLOWS:-(1) 120 BSS (125 MICORN) - ALL PASSING(2) 240 BSS (63 MICORN) - 90 TO 95% PASSING(3) 350 BSS (45 MICORN) - 80 TO 85% PASSING

JSS-1370-03:2007 REVISION NO (3)

• Aluminium Powder Making Machine or 1. Melting Furnace. 2. Spray Atomization Machine 3. Powder Mixing Machine 4. Vacuum pump. 5. Sieve Shaker.

• 6. Relevant Inspection & testing facility.

ZINC BASED PHOSPHATING SOLUTION MEANT FOR PROTECIVE PURPOSE UNDER PAINT OIL COATING CONFORMING TO IS 6005-1998 (MAKE BERGER/GRAUER & WEIL/CMP ONLY)

ZINC BASED PHOSPHATING SOLUTION MEANT FOR PROTECIVE PURPOSE UNDER PAINT OIL COATING CONFORMING TO IS 6005-1998 (MAKE BERGER/GRAUER & WEIL/CMP ONLY)

REFINED BEES WAX GRADE-A TO SPECN:-IS-1504-1996 (REAFFIRMED 2002)(3RD REV.) WITH AMENDMENT NO.1 JUNE 2007.WITH MELTING POINT 61 DEGREE CENTIGRADE MIN

SPECN:-IS-1504-1996 (REAFFIRMED 2002)(3RD REV.) WITH AMENDMENT NO.1 JUNE 2007

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

FABRICATION OF RUBBER ADHESIVE FOR RUBBER COMPOUND FOR SOLE & HEEL FOR BOOT ANKLE LEATHER DVS.NO MATERIAL WILL BE PROVIDED BY THE FACTORY.ALL REQUIRED MATRIALS

AS PER REQUIREMENT & SPECIFICATION

PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

BUSH TO DRG NO NBL8220073 (LF 9927090768)

BUSH TO DRG NO NBL8220073 (LF 9927090768)

COVER PLATE TO DRG NO BL8604199 (LF 9927090364)

COVER PLATE TO DRG NO BL8604199 (LF 9927090364)

CLAMPING PLATE TO DRG NO BSH8600548 (LF 9927089066)

CLAMPING PLATE TO DRG NO BSH8600548 (LF 9927089066)

GLAND TO DRG NO Y7474906 (LF 992708966)

GLAND TO DRG NO Y7474906 (LF 992708966)

GLAND TO DRG NO Y7474810 (LF 9023111153)

GLAND TO DRG NO Y7474810 (LF 9023111153)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

PAWL TO DRG NO Y6276119 WITHOUT ELECTROPLATING/COATING (LF 9023081352)

PAWL TO DRG NO Y6276119 WITHOUT ELECTROPLATING/COATING (LF 9023081352)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BUSH TO DRG NO NBL8220035 (LF 9001090167)

BUSH TO DRG NO NBL8220035 (LF 9001090167)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CARDON SHAFT TO DRG NO NBL8244002 (LF 9001081419)

CARDON SHAFT TO DRG NO NBL8244002 (LF 9001081419)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BUSH TO DRG NO NBL8220052 (LF 9001081120)

BUSH TO DRG NO NBL8220052 (LF 9001081120)

GLAND TO DRG NOAL8233313 (LF 7440205856)

GLAND TO DRG NOAL8233313 (LF 7440205856)

DISC TO DRG NO BSH8260076 (LF 7432511027)

DISC TO DRG NO BSH8260076 (LF 7432511027)

H. ASSY TO DRG NO 15735000300 ( LF 7432111073)

H. ASSY TO DRG NO 15735000300 ( LF 7432111073)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-06 (LF 7440200332)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-06 (LF 7440200332)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-05 (LF 7440200331)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-05 (LF 7440200331)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-04 (LF 7440200330)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-04 (LF 7440200330)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-03 (LF 7440200329)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-03 (LF 7440200329)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-02 (LF 7440200328)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-02 (LF 7440200328)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-01 (LF 7440200327)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406-01 (LF 7440200327)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406 (LF 7440200326)

DIAPHRAGM FOR BLOCK D TO DRG NO AF7006406 (LF 7440200326)

DIAPHRAGM TO DRG NO AF7006053 (LF 7432412023)

DIAPHRAGM TO DRG NO AF7006053 (LF 7432412023)

GASKET TO DRG NO BSH8683509 WITHOUT ELECTROPLATING/COATING (LF 9927091981)

GASKET TO DRG NO BSH8683509 WITHOUT ELECTROPLATING/COATING (LF 9927091981)

PIN TO DRG NO Y2561928 (LF 9023081142)

PIN TO DRG NO Y2561928 (LF 9023081142)

SEALIG RING NO NBL8683159-01 (LF 9001150273)

SEALIG RING NO NBL8683159-01 (LF 9001150273)

NBL8683159-01

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CLAMP FOR BLOCK BPV-29 TO DRG NO BPV29.134 WITHOUT ELECROPLATING/COATING (LF 7445601228)

CLAMP FOR BLOCK BPV-29 TO DRG NO BPV29.134 WITHOUT ELECROPLATING/COATING (LF 7445601228)

ANGLE PIECE AS PER DRG NO AL8.110.537-01 FOR 1A43-GYROSTABILIZER ( LF 7440205852)

ANGLE PIECE AS PER DRG NO AL8.110.537-01 FOR 1A43-GYROSTABILIZER ( LF 7440205852)

ANGLE PIECE AS PER DRG NO IUMK741.522.005 FOR 1A43-VISOR ( LF 7440205848)

ANGLE PIECE AS PER DRG NO IUMK741.522.005 FOR 1A43-VISOR ( LF 7440205848)

CLAMP FOR BLOCK BPV-29 TO DRG NO BPV29.143 WITHOUT ELECROPLATING/COATING (LF 7440011523)

CLAMP FOR BLOCK BPV-29 TO DRG NO BPV29.143 WITHOUT ELECROPLATING/COATING (LF 7440011523)

BUTTON TO DRG NO AF8677028 (LF 7432412048)

BUTTON TO DRG NO AF8677028 (LF 7432412048)

BEARING TO DRG NO BSH8250105 ( LF 7432111062)

BEARING TO DRG NO BSH8250105 ( LF 7432111062)

PIN TO DRG NO BSH9317168 (LF 7432111046)

PIN TO DRG NO BSH9317168 (LF 7432111046)

PIN TO DRG NO BSH8126163 (LF 7420411029)

PIN TO DRG NO BSH8126163 (LF 7420411029)

PLUG TO DRG NO BL8656012 (LF 7420112007)

PLUG TO DRG NO BL8656012 (LF 7420112007)

SPRING TO DRG NO BSH8387105 (LF 9927088807)

SPRING TO DRG NO BSH8387105 (LF 9927088807)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

SPRING TO DRG NO BSH8387154 (LF 9927088805)

SPRING TO DRG NO BSH8387154 (LF 9927088805)

SPRING RING TO DRG NO AL8247181 FOR BLOCK D (LF 7445101265)

SPRING RING TO DRG NO AL8247181 FOR BLOCK D (LF 7445101265)

SPRING TO DRG NO AL8.602.632 FOR VISOR (LF 7440202692)

SPRING TO DRG NO AL8.602.632 FOR VISOR (LF 7440202692)

SPRING AS PER DRG NO AL8.383.937 (LF 7440201662)

SPRING AS PER DRG NO AL8.383.937 (LF 7440201662)

SPRING FOR HEAD 1G46 TO DRG NO IUMK753552011 (LF 7440200786)

SPRING FOR HEAD 1G46 TO DRG NO IUMK753552011 (LF 7440200786)

SPRING FOR HEAD 1G46 TO DRG NO AL8385124 (LF 7440200783)

SPRING FOR HEAD 1G46 TO DRG NO AL8385124 (LF 7440200783)

SPRING FOR HEAD 1G46 TO DRG NO AL8383261 (LF 7440200779)

SPRING FOR HEAD 1G46 TO DRG NO AL8383261 (LF 7440200779)

SPRING FOR HEAD 1G46 TO DRG NOAL8383889 (LF 7440200774)

SPRING FOR HEAD 1G46 TO DRG NOAL8383889 (LF 7440200774)

SPRING FOR HEAD 1G46 TO DRG NO IUMK753513015 (LF 7440200767)

SPRING FOR HEAD 1G46 TO DRG NO IUMK753513015 (LF 7440200767)

SPRING TO DRG NO AL8387487 (LF 7440200266)

SPRING TO DRG NO AL8387487 (LF 7440200266)

SPRING WASHER TO DRG NO BSH8943035 MATERIAL WILL BE SUPPLIED BY OLF (LF 7432112013)

SPRING WASHER TO DRG NO BSH8943035 MATERIAL WILL BE SUPPLIED BY OLF (LF 7432112013)

SPRING TO DRG NO OLF/R&D/RDS/001.05.02 M1 (LF 7400802011)

SPRING TO DRG NO OLF/R&D/RDS/001.05.02 M1 (LF 7400802011)

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.

STRONTIUM NITRATE FOR PYROTECHNIC COMPOSITION SIZE : PASS SIEVE 60 BSS AND 100% RETAINED ON 170 BSS SIEVE TO SPECN:IS-5671-1984 (FIRST REVISION)(REAFFIRMED 2005) AMENDMENT-1AUGUST-1990 DC- 5371-ME DT. 28.07.2015.

SPECN: IS-5671-1984 (FIRST REV.) (REAFFIRMED 2005) AMENDMENT-1 AUGUST-1990 DC-5371-ME DT 28.07.2015

SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)

SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)

POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003

POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003

POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 %

POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 %

POTASSIUM CHLORATE TECHNICAL GR-1 IN CRYSTAL FORM SPECN:- IS-708-1987(2nd REV)REAFFIRMED 2005 DC NO.3925-ME DT.13-12-2008 EXCEPT FOR BROMATE CONTENT WHICH SHOULD NOT EXCEED0.02% AS BRO3 SIZE 120/170A I.e. 120 BSS ALL PASS & 170 BSS80% RETENTION.

SPECN:- IS-708-1987(2nd REV)

• As per respective standard procedure/ process of manufacturing

• As per respective standard procedure/ process of manufacturing

POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 %

POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 %

Plastic Slide Fastener Light Special Duty Closed End Auto Lock in Darker OG Shade 20 cm.

SPECN NO. IS:14181 (PART 1 TO 3): 2002 WITH AMENDMENT NO.2 MARCH 2008. EXCEPT SHADE ( SHADE OF PSF SHOULD MATCH WITH THE BASIC FABRIC SHADE SAMPLE AS RECEIVED FROM OPF KANPUR)