COMPOSITION SR-227A TO SPECN:L 9620 B(a),SUPERSEDES L-8971

COMPOSITION SR-227A TO SPECN:L 9620 B(a),SUPERSEDES L-8971

SILVER NITRATE (PURE GRADE) TO SPECN. IS:2214.

SILVER NITRATE (PURE GRADE) TO SPECN. IS:2214.

GRAPHITE POWDER SULPHER FREE (90 MICRON)TO JSS-9620-01 WITH LATEST DC(I)3686-ME,DT.3.7.2001.

GRAPHITE POWDER SULPHER FREE (90 MICRON)TO JSS-9620-01 WITH LATEST DC(I)3686-ME,DT.3.7.2001.

ZINC STEARATE TO JSS-6810-133:2001 DCI 3717 ME, DT.16.01.2002.

ZINC STEARATE TO JSS-6810-133:2001 DCI 3717 ME, DT.16.01.2002.

APC-11(CEMENT RD-1154) TO SPEC.JSS- 8030-24:2011, REVISION NO.2,DC NO 3821-ME DT 02-09-2004.

APC-11(CEMENT RD-1154) TO SPEC.JSS- 8030-24:2011, REVISION NO.2,DC NO 3821-ME DT 02-09-2004.

BARIUM NITRATE,GR.1 TO JSS:6810-59 -2010(REV.NO.3), 4087-ME DT.24.09.10 WITH AMMENDMENT LIST NO.1, (SIEVE SIZE:-MINIMUM 97+/-3 % PASSING THROUGH 125 MICRON IS SIEVE)

BARIUM NITRATE,GR.1 TO JSS:6810-59 -2010(REV.NO.3), 4087-ME DT.24.09.10 WITH AMMENDMENT LIST NO.1, (SIEVE SIZE:-MINIMUM 97+/-3 % PASSING THROUGH 125 MICRON IS SIEVE)

X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE MENTIONED).

X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE MENTIONED).

ALUMINIUM POWDER (LIGHT)GR.1 TO SPCN JSS:1370-04-2011 REV-1 5024-ME DT.01.08.11. (SIEVE SIZE:- 125 MICRON 98 +/- 2% )

ALUMINIUM POWDER (LIGHT)GR.1 TO SPCN JSS:1370-04-2011 REV-1 5024-ME DT.01.08.11. (SIEVE SIZE:- 125 MICRON 98 +/- 2% )

APC-7[LUTING MK-6 AMMN.(RD-1178)]TO SPECN: JSS-8030-19:2011 REV-2 ADMT-1 5085-ME DT.06.08.12.

APC-7[LUTING MK-6 AMMN.(RD-1178)]TO SPECN: JSS-8030-19:2011 REV-2 ADMT-1 5085-ME DT.06.08.12.

ALUMINIUM POWDER (HEAVY)GR.1, SIEVE SIZE: 250 MICRON, DENSITY-1.0 g/cc(MIN)TO SPECN:JSS:1370-03-2014 REV-3, DC NO:5297-ME,DT.16.12.2014.

ALUMINIUM POWDER (HEAVY)GR.1, SIEVE SIZE: 250 MICRON, DENSITY-1.0 g/cc(MIN)TO SPECN:JSS:1370-03-2014 REV-3, DC NO:5297-ME,DT.16.12.2014.

APC-12(GREASE AMMN.)TO SPECN.NO.JSS -9150-45:2013,Rev-3 DC.5204 ME Dt.12.04.14

APC-12(GREASE AMMN.)TO SPECN.NO.JSS -9150-45:2013,Rev-3 DC.5204 ME Dt.12.04.14

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PACK] ADDITIONAL REQUIREMENT:- THE ENCLOSED TEST PARAMETERS TO BE ENSURED,BY TESTING THE ADVANCE SAMPLE BEFORE BULK SUPPLY.THERE WILL BE A COMPARATIVE TEST OF ADVANCE SAMPLE & THAT OF THE SAMPLE DRAWN FROM THE BULK SUPPLY IN CASE OF ADVANCE SAMPLE IS ACCEPTED. TEST PARAMETERS ARE ENCLOSED.

PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PACK] ADDITIONAL REQUIREMENT:- THE ENCLOSED TEST PARAMETERS TO BE ENSURED,BY TESTING THE ADVANCE SAMPLE BEFORE BULK SUPPLY.THERE WILL BE A COMPARATIVE TEST OF ADVANCE SAMPLE & THAT OF THE SAMPLE DRAWN FROM THE BULK SUPPLY IN CASE OF ADVANCE SAMPLE IS ACCEPTED. TEST PARAMETERS ARE ENCLOSED.

MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11

MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

PARANITRO TOLUNE TO SPECN.IND/ME/ 962(PROV)DC-3284-ME,DT-21.02.95.

PARANITRO TOLUNE TO SPECN.IND/ME/ 962(PROV)DC-3284-ME,DT-21.02.95.

TRADE ASSISTANCE FOR LASTING OPERATION OF BOOT HIGH ANKLE DVS OF VARIOUS SIZES

IND/TC/3844

TRADE ASSISTANCE TO STITCH COMPLETE CLOSED UPPER OF BHA DVS

IND/TC/3844

BUFFALOW HIDE (SHE CLASS) LIMED WEIGHT 18-25 KGS

SPECN No.QA/RH/6/BUFF/1 DT. 13.3.2001

to Drg No. 3304-06-9

to Drg No. 3304-06-9

SB 3317-01-4ACB

SB 3317-01-4ACB

SB 3301-85/86-4A

SB 3301-85/86-4A

306-65-2A

306-65-2A

ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

AS PER SPECIFICATIONS ENCLOSED

HARDENER FOR ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

SPECIFICATIONS ENCLOSED

to Drg. No. Sb 301-82/83-5

to Drg. No. Sb 301-82/83-5

SB 310-00-7

SB 310-00-7

As per Requirements & Specifications

As per Requirements & Specifications

SB 317-00-38/43

SB 317-00-38/43

SB 413-00-15

SB 413-00-15

SB 411-22-33

SB 411-22-33

3319-220

3319-220

304-10-5 & 304-11-10

304-10-5 & 304-11-10

SB 3338-00-16

SB 3338-00-16

STEEL 32 MM.(-0.05MM)TO SPECN.BS:970 PT-I:1983,GD 708 M40'T'COND. OR EN-19A. V.D IN HR.PILLED & ANNEALED COND(240HV.MAX)MAINTAINED S&P COMBINED 0.022%MAX.TO LENGTH 530MM. WITH NMIR TEST AS PER IS:4163-82. FOR BARREL(NPB),12 BORE(NPB)PAG

BS:970 PT-I:1983,GD 708 M40'T'COND. OR EN-19A. V.D IN HR.PILLED & ANNEALED COND(240HV.MAX)MAINTAINED S&P COMBINED 0.022%MAX.TO LENGTH 530MM. WITH NMIR TEST AS PER IS:4163-82.

S/5570/JERSEY V NECK DARK OG/2009/TC-12 Except that lot as per appendix C

S/5570/JERSEY V NECK DARK OG/2009/TC-12 Except that lot as per appendix C

SB 332-00-11

SB 332-00-11

WATER PUMP TO DRG NO.SB 411-00-56

WATER PUMP TO DRG NO.SB 411-00-56

SB 411-00-56

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

to Drg. No. SB 3304-01-8

to Drg. No. SB 3304-01-8

SB 327-00-47-01

SB 327-00-47-01

CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-ADT.9-03-2001,SHEET-2 DC-35684-A DT.06-04-94 TO SPECN.CQA(A)2303(f)

CONTAINER WITH DISC CLOSING TO DRG.NO.ARDE-1935, DET NO.1 PART NO.ITV 28A SHEET-1 TO DC.36747-ADT.9-03-2001,SHEET-2 DC-35684-A DT.06-04-94 TO SPECN.CQA(A)2303(f)

SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART NO.IQX-831, DC NO.36785,DT.08.10.2001 [FOR PRIMER 18A]

SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART NO.IQX-831, DC NO.36785,DT.08.10.2001 [FOR PRIMER 18A]

CELLULOID SHEET TRANSPARENT TO SIZE (610X1372X0.13)MM TO SPECN. JSS-1375-03-2011, REV.3,DC NO. 5070-ME, DT.07.02.12.

CELLULOID SHEET TRANSPARENT TO SIZE (610X1372X0.13)MM TO SPECN. JSS-1375-03-2011, REV.3,DC NO. 5070-ME, DT.07.02.12.

GUN POWDER (G-20)TO JSS:1376-05:2005 REV-2.

GUN POWDER (G-20)TO JSS:1376-05:2005 REV-2.

GUN POWDER (G-12)TO JSS:1376-05:2014 REV NO.3.

GUN POWDER (G-12)TO JSS:1376-05:2014 REV NO.3.

GUN POWDER G-7 TO SPECN: JSS: 1376-05-2014 REV.3 DC.5294-ME DT.16.12.14.

GUN POWDER G-7 TO SPECN: JSS: 1376-05-2014 REV.3 DC.5294-ME DT.16.12.14.

SYNTHETIC (PLASTIC) SLIDE FASTENER LIGHT SPECIAL DUTY CLOSED END AUTO LOCK POTTOM STOP OG 20 CMS

IS: 14181 (pT 1-3) 2002 & Amdt. No.2 March 2008

SYNTHETIC (PLASTIC) SLIDE FASTENER MEDIUM SPECIAL DUTY TWO-WAY CENTRE CLOSING, AUTO LOCK DOUBLE SLIDER, OG 97 CMS.

IS: 14181 (PT 1-3) 2002 & AMDT No. 2 March 2008

THREAD COTTON SEWING CONSTRUCTION 16 TEX x 27 TO SPECN:JSS-8310-02-2007-REV NO.2 (UNDYED AND PROOFED).

THREAD COTTON SEWING CONSTRUCTION 16 TEX x 27 TO SPECN:JSS-8310-02-2007-REV NO.2 (UNDYED AND PROOFED).

THREAD COTTON SEWING CONSTRUCTION 16 TEX x 27 TO SPECN:JSS-8310-02-2007-REV NO.2 (UNDYED AND PROOFED).

THREAD COTTON SEWING CONSTRUCTION 16 TEX x 27 TO SPECN:JSS-8310-02-2007-REV NO.2 (UNDYED AND PROOFED).

SILK THREAD NO-1(PROOFED)TO SPECN:- JSS-8305-23:1994,DC NO.3512-ME,DT.23.04.98

SILK THREAD NO-1(PROOFED)TO SPECN:- JSS-8305-23:1994,DC NO.3512-ME,DT.23.04.98

TAPE WEBBING COTTON PROOFED, SIZE-25 +/-1.6MM WIDE x 1.00+/-0.1MM THICK TO SPECN: JSS:8305-18-2013 REV-3, DC NO.:5134-ME, DT.25.05.2013. NOTE:-BREAKING LOAD 120KG MINIMUM AS PER SPECIAL REQUIREMENT

TAPE WEBBING COTTON PROOFED, SIZE-25 +/-1.6MM WIDE x 1.00+/-0.1MM THICK TO SPECN: JSS:8305-18-2013 REV-3, DC NO.:5134-ME, DT.25.05.2013. NOTE:-BREAKING LOAD 120KG MINIMUM AS PER SPECIAL REQUIREMENT

TAPE COTTON MEDIUM PROOFED SIZE:25 MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-ME DT.12.12.2002.

TAPE COTTON MEDIUM PROOFED SIZE:25 MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-ME DT.12.12.2002.

TRADE FABRICATION OF PACK WITH ALUMINIUMFRAME (MODIFIED)

AS PER REQUIREMENT AND SPECIFICATION

FABRICATION OF POUCHES AMMUNITION (MODIFIED)

AS PER REQUIREMENT & SPECIFICATION

TRADE FABRICATION OF BAG KIT UNIVERSAL (MARK-2)

S/2532/BAG KIT UNIVERSAL(OG)/TC-6 (a)

CU.STRIP,20+/-0.1(W)X 0.7+0.01(T)MM TO BS:2870,1970,C-102,CONDITION "O". OXIDIZATION,BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=03 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 20 TO 30 KGS IN SINGLE COIL FORM, NABL TEST CERTIFICATE REQUIRED.

CU.STRIP,20+/-0.1(W)X 0.7+0.01(T)MM TO BS:2870,1970,C-102,CONDITION "O". OXIDIZATION,BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE [PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=03 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 20 TO 30 KGS IN SINGLE COIL FORM, NABL TEST CERTIFICATE REQUIRED.

COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "1/2 H".OXIDIZATION,BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=0.5 KG IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 10 TO 15 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.

COPPER STRIP TO SIZE 10+/-0.2MM(W)* 0.1+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "1/2 H".OXIDIZATION,BEND & DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION:EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=0.5 KG IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 10 TO 15 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.

COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "O". OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=02 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 15 TO 20 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.

COPPER STRIP TO SIZE:13+/-0.2MM(W)* 0.35+0.02MM(T) DEEP DRAWING QUALITY TO BS:2870,1970,C-102, CONDITION "O". OXIDIZATION, BEND& DENT MARK SHOULD NOT BE PRESENT IN THE COIL/ROLL SURFACE[PACKING CONDITION: EACH ROLL OF STRIP SHOULD BE RAPPED WITH PROPER COTTON CLOTHES THEN IN POLYTHENE PACK AND AFTER THAT THESE ROLLS SHOULD BE KEPT IN WOODEN BOX WITH PROPER CUSHIONING/ SUPPORT] ADVANCE SAMPLE=02 KGS IN SINGLE COIL FORM, BULK TO BE SUPPLIED IN 15 TO 20 KGS IN SINGLE COIL FORM, NABL CERTIFICATE REQUIRED.

CLOTH CALICO (915MM WIDTH)WHITE TO IS:5088-1982,VERITY NO-5 (1ST.REV. WITH AMMEND NO.1) (FOR COTTON TEXTILES FOR AMMUNITIONS).

CLOTH CALICO (915MM WIDTH)WHITE TO IS:5088-1982,VERITY NO-5 (1ST.REV. WITH AMMEND NO.1) (FOR COTTON TEXTILES FOR AMMUNITIONS).

CLOTH SILK UNDYED UNPROOFED TO SPECN:JSS-8305-22-2013,REV.NO.3,DC NO:5184-ME,DT.19.03.14 SIZE: 990MM TO 1010MM OR 1320MM TO 1370MM WIDTH IS ACCEPTABLE.

CLOTH SILK UNDYED UNPROOFED TO SPECN:JSS-8305-22-2013,REV.NO.3,DC NO:5184-ME,DT.19.03.14 SIZE: 990MM TO 1010MM OR 1320MM TO 1370MM WIDTH IS ACCEPTABLE.

DISC BOX CLOTH TO DRG.NO.QX-1466 DCI:31389-A FOR FUZE 117 MK-20.[ MATERIAL: ALL WOOL PLAIN ALTERNATIVELY CLOTH COLLAR WHITE TO SPECN: JSS-8305-21-2013 REV-3 , 5205-ME , DT-12.04.14]

DISC BOX CLOTH TO DRG.NO.QX-1466 DCI:31389-A FOR FUZE 117 MK-20.[ MATERIAL: ALL WOOL PLAIN ALTERNATIVELY CLOTH COLLAR WHITE TO SPECN: JSS-8305-21-2013 REV-3 , 5205-ME , DT-12.04.14]

FABRIC SILK FINE, UNPROOFED & UNDYED [WIDTH:1.09 TO 1.10 MTRS]TO JSS:8305-22/2013-REV-3, DC.5184-ME , DT-19.03.14 (GSM OF THE MATERIAL WILL BE ABOVE 50.88 "O"PER SQ.MTR.)

FABRIC SILK FINE, UNPROOFED & UNDYED [WIDTH:1.09 TO 1.10 MTRS]TO JSS:8305-22/2013-REV-3, DC.5184-ME , DT-19.03.14 (GSM OF THE MATERIAL WILL BE ABOVE 50.88 "O"PER SQ.MTR.)

CLOTH CAMBRIC COTTON BLEACHED UNDYE SIZE-1143MM WIDTH TO IS: 5088-1982, VERITY NO-2 WITH AMMND. NO-1 MAY 1985 & AMMENDMENT NO-2 OCT.1996.

CLOTH CAMBRIC COTTON BLEACHED UNDYE SIZE-1143MM WIDTH TO IS: 5088-1982, VERITY NO-2 WITH AMMND. NO-1 MAY 1985 & AMMENDMENT NO-2 OCT.1996.

DISC CLOTH, SIZE: 31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL (MELTON FINISH)TO SPECN: JSS:8305-16: 2014(REV.3) OR CLOTH COLAR,WHITE TO SPECN:JSS:8305-21:2013 REV.3 REF.DRG.CIA/AMN/2176,PART NO-ISX 77 GF,ITEM NO-11.DC:37013A, DT.06.05.2005.

DISC CLOTH, SIZE: 31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL (MELTON FINISH)TO SPECN: JSS:8305-16: 2014(REV.3) OR CLOTH COLAR,WHITE TO SPECN:JSS:8305-21:2013 REV.3 REF.DRG.CIA/AMN/2176,PART NO-ISX 77 GF,ITEM NO-11.DC:37013A, DT.06.05.2005.

LEAD WIRE SIZE:1.25 +/- 0.25MM DIA. TO SPECN: GOST-5655-67

LEAD WIRE SIZE:1.25 +/- 0.25MM DIA. TO SPECN: GOST-5655-67

LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97.

LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97.

LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010.

LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010.

DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).

DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).

LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)

LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)

CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A.

CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A.

LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY

LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

FELT DISC, D-21MM,T-3MM TO DRG.NO. ARDE-1905 DET-11,IQX-780,DC NO.35879-A,DT-20.12.94

FELT DISC, D-21MM,T-3MM TO DRG.NO. ARDE-1905 DET-11,IQX-780,DC NO.35879-A,DT-20.12.94

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=280*200*5 to 6.3(MM) SOFT QUALITY TO SPECN.IND/ME/889(PROV),DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=280*200*5 to 6.3(MM) SOFT QUALITY TO SPECN.IND/ME/889(PROV),DC NO.3176-ME, DT.12/08/94.

FELT DISC(SMALL)SIZE:26MM DIA X 3MM THICK TO SPECN.IS:1719:2000(4RD REVISION AMENDMENT-1) WHITE PRESSED PROOFED.

FELT DISC(SMALL)SIZE:26MM DIA X 3MM THICK TO SPECN.IS:1719:2000(4RD REVISION AMENDMENT-1) WHITE PRESSED PROOFED.

FELT DISC (BIG) SIZE:35MM DIA X 3MM TO SPECN.IS:1719:2000( REVISION-4) WHITE PRESSED PROOFED.

FELT DISC (BIG) SIZE:35MM DIA X 3MM TO SPECN.IS:1719:2000( REVISION-4) WHITE PRESSED PROOFED.

FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.

FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.