HOLDER TO DRG NO BL8126398 (LF 7420111019)

HOLDER TO DRG NO BL8126398 (LF 7420111019)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

STUD LEVER CHANGE FOR 7.62 MM ASSAULT RIFLE GHAATAK (WITHOUTHEAT TREATMENT)

STUD LEVER CHANGE FOR 7.62 MM ASSAULT RIFLE GHAATAK (WITHOUTHEAT TREATMENT)

DRG. NO. RFI SK NO. 10068

FIXED BUTT SUB ASSY FOR 7.62 MM ASSAULT RIFLE GHAATAK

FIXED BUTT SUB ASSY FOR 7.62 MM ASSAULT RIFLE GHAATAK

SK-AR-12-SA-RFI

FINISHED BODY (BLACK) FOR TEAR GAS GUN FROM TRADE SOURCES TGG-201 (LT. DC-09/010/13 DT. 16.01.14)

FINISHED BODY (BLACK) FOR TEAR GAS GUN FROM TRADE SOURCES TGG-201 (LT. DC-09/010/13 DT. 16.01.14)

TGG-201

ADHESIVE TAPE WP FABRIC - 25 MM TO SPEC IND/ME/79 (b)

ADHESIVE TAPE WP FABRIC - 25 MM TO SPEC IND/ME/79 (b)

IND/ME/79 (b)

TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK SPECN.IND/ME/790(b): 2013 DC NO. 5266-ME,DT.24.06.2014 (EACH ROLL OF 50 MTRS.).

TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE:-50MM WIDE,COLOUR BLACK SPECN.IND/ME/790(b): 2013 DC NO. 5266-ME,DT.24.06.2014 (EACH ROLL OF 50 MTRS.).

LOCTITE-271 (ADHESIVE ANAEROBIC)

LOCTITE-271 (ADHESIVE ANAEROBIC)

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993

CEMENT ABS SPECN.IND/ME/890 (PROV) DC 3466-ME, DT.22.9.97.

CEMENT ABS SPECN.IND/ME/890 (PROV) DC 3466-ME, DT.22.9.97.

CEMENT DOBECOT 520F

CEMENT DOBECOT 520F

ADHESIVE SYNTHETIC TO SPECN.IND/ME/ 788(d) LATEST DC.(TO SUPPLIED IN 5 KG PACK )

ADHESIVE SYNTHETIC TO SPECN.IND/ME/ 788(d) LATEST DC.(TO SUPPLIED IN 5 KG PACK )

HARDNER EH 411 OR 408 (TO BE SUPPLIED IN 01 KG PACK).

HARDNER EH 411 OR 408 (TO BE SUPPLIED IN 01 KG PACK).

PLASTIC PALLET FOR 0.303 ANTI RIOT GUN AS PER RFI SK NO. 10007

PLASTIC PALLET FOR 0.303 ANTI RIOT GUN AS PER RFI SK NO. 10007

RFI SK NO. 10007

FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046

FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046

RFI/SK NO. 10046

FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045

FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045

RFI SK/10045

PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93

PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93

OTF/PG/016

• AS PER ATTACHMENT

• AS PER ATTACHMENT

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

• MSME

• ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C

BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C

• as per attachment

• as per attachment

ELECTRIC MOTOR MVP-2 TO DRG.NO. MVP-2-000SB

ELECTRIC MOTOR MVP-2 TO DRG.NO. MVP-2-000SB

DRG.NO. MVP-2-000SB

HDPE Dot coated Printed Fusible Interlining Fabric 150 cm

1) Raw Material : 100% Cotton 2) Count (Warp & Weft) : 30s 3) Ends per Inch : 76+/- 5 4) Picks per Inch : 76 +/- 5 5) Width : 150 cm (Min) 6) Weave : Plain 7) Coating : HDPE 8) Colour : White 9) GSM : 148 +5/-2.5% 10) Shrinkage % : As per Appendix A of IND/TC/2089(a) 11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a) 12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that : a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between. b. Roll weight shall not exceed 50 kgs. c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet. d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm. e. Fabric selvedges shall be wound evenly at one edge. 13) Sampling plan : As per annexure.

Sampling Plan attached as Drawing file

IND/TC/2089(a) and as per Requirement

IND/TC/2089(a) and as per Requirement

POLY ELECTROLYTE FOR ETP.

POLY ELECTROLYTE (PE GEL) FOR ETP WITH RELEVANT IS-SPECIFICATION. NOTE : SPECIFICALLY REQUIRED FOR EFFLUENT TREATMENT PLANT OF6 CUM/D CAPACITY. THE ETP IS DESIGNED AS BATCH PROCESS FOR TREATING THE WASTE WATER BEING GENERATED FROM PROCESSING ACTIVITY IN THE VARIOUS SHOPS.

OXIDISER FOR ETP.

OXIDISER TO BE USED FOR ETP PLANT

NaOh FOR ETP.

SODIUM HYDROXIDE OR CAUSTIC SODA OR ANHYDROUS SODIUM HYDROXIDE BOILING POINT:1390 DEGREE CELCIOUS,SPECIFIC GRAVITY:2.13, PH:STRONGLY BASIC,ODOR:ODORLESS,SOLUBILITY:3476/100 G WATER@ 100C,BULKDENSITY:70 LBS/CU.FT,FREEZING/MELTING POINT:310-320 C,PHYSICAL STATE:SOLID BEADS.

POLY AL. CHLORIDE FOR ETP.

POLY ALUMINIUM CHLORIDE WITH RELEVANT IS-SPECIFICATION. NOTE : SPECIFICALLY REQUIRED FOR EFFLUENT TREATMENT PLANT OF6 CUM/D CAPACITY. THE ETP IS DESIGNED AS BATCH PROCESS FOR TREATING THE WASTE WATER BEING GENERATED FROM PROCESSING ACTIVITY IN THE VARIOUS SHOPS.

HYDROCHLORIC ACID FOR ETP.

HYDROCHLORIC ACID,17 TO 37% WITH RELEVANT IS-SPECIFICATION. NOTE : SPECIFICALLY REQUIRED FOR EFFLUENT TREATMENT PLANT OF 6 CUM/D CAPACITY. THE ETP IS DESIGNED AS BATCH PROCESS FOR TREATING THE WASTE WATER BEING GENERATED FROM PROCESSING ACTIVITY IN THE VARIOUS SHOPS.

CALCIUM CHLORITE TO BE USED FOR ETP PLANT

CALCIUM CHLORITE TO BE USED FOR ETP PLANT

POLYESTER WADDING HOLLOW SILCONIZED 350 GSM IN 91 CM

AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6

CLOTH 'C' HEAVY 72CM (CAT PART NO. H2/8305-000142

AS PER REQUIREMENT & SPECIFICATION

TAPE NYLON THIN/THICK OG OFF SIZES (FOR SYNTHETIC WEB EQUIPMENT PACK WITH ALU. FRAME MODIFIED VERSION) EACH SET CONSISTING OF FOLLOWINGS

AS PER REQUIREMENT AND SPECIFICATION

IS:1422-1983(V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2

IS:1422-1983(V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2

BUCKLE ALUMN. ALLOY Q.R. 19MM BLACK ANODISED

AS PER DRG. NO. SK-886 AND CQA(GS)/US/324 (5653/PK).

BUCKLE ALUMN. ALLOY 25MM BLACK ANODISED

AS PER DRG. NO. 856 (CQA(GS)/US/324 & ATTACHED RELEVANT DRG)

JSS - 03-03-01 FEB., 1970

JSS - 03-03-01 FEB., 1970

CLOTH 'C' HEAVY 72CM (CAT PART NO. H2/8305-000142

AS PER REQUIREMENT & SPECIFICATION

BUCKLE ALUMN. ALLOY Q.R. 19MM BLACK ANODISED

AS PER DRG. NO. SK-886 AND CQA(GS)/US/324 (5653/PK).

BUCKLE ALUMN. ALLOY 25MM BLACK ANODISED

AS PER DRG. NO. 856 (CQA(GS)/US/324 & ATTACHED RELEVANT DRG)

BUCKLE AL.ALLOY 57 MM MALE & FEMALE FOR BELT WAIST ICK(MODIFIED VERSION)

PROV.IND/TC/1550 (7202/PK DT.21.09.13)

TRADE ASSISTANCE FOR DRILLING OPERATION OF ROOF POLE FOR TEFS 4M/2M.

AS PER REQUIREMENT AND SPECIFICATION

TRADE ASSISTANCE FOR DRILLING OPERATION OF UNIVERSAL MEMBER FOR TEFS 4M/2M.

AS PER REQUIREMENT AND SPECIFICATION

BUCKLE SERRATED (ALUMINIUM FOR BELT WAIST OF SYNTHETIC WEB EQUIPMENT

AS PER DRG NO SK-853,854 (FOR ALUMINIUM ALLOY SHEET 1.5

NITRIC ACID(PURE 69%)TO IS:264-76 .(TO BE SUPPLIED IN 2.5 LITRES PACK)

NITRIC ACID(PURE 69%)TO IS:264-76 .(TO BE SUPPLIED IN 2.5 LITRES PACK)

housing ep to drg. cwc/229/32/2

housing ep to drg. cwc/229/32/2

cwc/229/32/2

HIRING OF L.P.,TRUCK FOR DESPATCH OF MILITARY STORES TO 223, A.B.O.D.,JALANDHAR FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P.,TRUCK FOR DESPATCH OF MILITARY STORES TO 223, A.B.O.D.,JALANDHAR FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF LP TRUCK (18' LONG) FOR DISPATCH OF MILITARY STOREFROM KANPUR TO SRINAGAR.SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF LP TRUCK (18' LONG) FOR DISPATCH OF MILITARY STOREFROM KANPUR TO SRINAGAR.SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P.TRUCK FOR DESPATCH OF MILITARY STORES TO 9, F.O.D. PATHANKOTE FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P.TRUCK FOR DESPATCH OF MILITARY STORES TO 9, F.O.D. PATHANKOTE FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P. TRUCK FOR DESPATCH OF MILITARY STORESTO 222, A.B.O.D.,GUWHATI FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P. TRUCK FOR DESPATCH OF MILITARY STORESTO 222, A.B.O.D.,GUWHATI FROM OPF KANPURSPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF TRUCKS CAPACITY 5 TON 17 FEET FOR DISPATCH OF MILITARY STORE FROM OPF TO C O D KANPUR.TRUCKS ARE REQUIRED AS AND WHEN REQUIRED BASIS ALONG WITH LABOURERS FOR LOADING &UNLOADING

HIRING OF TRUCKS CAPACITY 5 TON 17 FEET FOR DISPATCH OF MILITARY STORE FROM OPF TO C O D KANPUR.TRUCKS ARE REQUIRED AS AND WHEN REQUIRED BASIS ALONG WITH LABOURERS FOR LOADING &UNLOADING

HIRING OF L.P.TRUCK FOR DESPATCH OF MILITARY STORES TO A.L.D.,ALLAHABAD FROM OPF KANPUR SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P.TRUCK FOR DESPATCH OF MILITARY STORES TO A.L.D.,ALLAHABAD FROM OPF KANPUR SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P. TRUCK TO DESPATCH OF MILITARY STORE TO 5, F.O.D. SILIGURI FROM OPF KANPUR.SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P. TRUCK TO DESPATCH OF MILITARY STORE TO 5, F.O.D. SILIGURI FROM OPF KANPUR.SPECN-18 FT LONG & 9 TON CAPACITY

HIRING OF L.P.TRUCK (18'LONG) 9 TON CAP.FOR DISPATCH OF MILITARY STORES TO AVADI CHENNAI FROM OPF KANPUR

HIRING OF L.P.TRUCK (18'LONG) 9 TON CAP.FOR DISPATCH OF MILITARY STORES TO AVADI CHENNAI FROM OPF KANPUR

HIRING OF L.P.TRUCK(18'LONG)& CAP.9 TON.FOR DISPATCH MILITA-RY STORES TO 1 F.O.D.UDHAMPUR FROM O.P.F. KANPUR

HIRING OF L.P.TRUCK(18'LONG)& CAP.9 TON.FOR DISPATCH MILITA-RY STORES TO 1 F.O.D.UDHAMPUR FROM O.P.F. KANPUR

Fabric Nylon 75 GSM White PU Coated 152cms Minimum Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.

Fabric Nylon 75 GSM White PU Coated 152cms Minimum Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Chest Rifle 5.56mm (Wooden) Capacity-10 Rifles with accessories. to DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

Chest Rifle 5.56mm (Wooden) Capacity-10 Rifles with accessories. to DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

LOCATOR to drg. no. (TF-013) IN FINISHED CONDITION

AS PER DRAWING

Test DAta

Test item for test

78945

ELECTROMAGNET EM-46 000SB DRG.NO.EM 46.000 SB SPCN.EM-46-000 TU

ELECTROMAGNET EM-46 000SB DRG.NO.EM 46.000 SB SPCN.EM-46-000 TU

DRG.NO.EM 46.000 SB SPCN.EM-46-000 TU

AZIMUTH INDICATOR 5203-10.HO 5203-66

AZIMUTH INDICATOR 5203-10.HO 5203-66

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

DMSRDE/TEX-3(P)/2001/1/(V.NO. 2)

CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE

CQA (T&C) PROV. SPECN NO. PROV/S/3566/RAIN CAPE MP DIS/TC-15(b) APPENDIX "A" & AS IN TE

IND/TC/0155 Except Threads/Cm (As per Appendix G of IND/TC/3844(a))

IND/TC/0155 Except Threads/Cm (As per Appendix G of IND/TC/3844(a))

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a)

PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a)

PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

PROV/S/4369/FWP PV/RIP/TC-11/1 (a)

EYELET ALU. ALLOY (CHEMICALY PASSIVATED) NO.24 WITH TURNOVER WASHER

IS:4084 WITH AMENDMENT NO 1 & SUPP SCHE. NO CIGS/SS/260(B)

IS 5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

IS 5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

EYELET BRASS NO.28 WITH TURN OVER WASHERBRONZED BLACK

IS:4084-1978,REAFFIRMED 2013,AMDS 2.

EYELET BRASS NO.28 WITH TURN OVER WASHER

IS:4084-1978 (1ST.REVISION) AMENDMENT NO.2,REAFFIRMED 1991.

EYELET BRASS NO.21 WITH PLAIN WASHER BRONZED BLACK

AS PER REQUIREMENT AND SPECIFICATION

EYELET BRASS 6.6 MM WEB EQUIPMENT PATTERN D.

IS:6021-1978.

EYELET ALU. ALLOY (CHEMICALY PASSIVATED) NO.24 WITH TURNOVER WASHER

IS:4084 WITH AMENDMENT NO 1 & SUPP SCHE. NO CIGS/SS/260(B)

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IS:1422-1983 (V.NO.2), REAFF. 2000 WITH AMDT. NO. 1 OF APR., 87, AMDT. NO. 2

IS:1422-1983 (V.NO.2), REAFF. 2000 WITH AMDT. NO. 1 OF APR., 87, AMDT. NO. 2

DEES STEEL 25MMX20MMX4MM GALVENISED

AS PER REQUIREMENT AND SPECIFICATION

ERW STEEL TUBE-25 MM N/BORE CLASS-HEAVY GR.YST 210

IS:1161-1979

ERW STEEL TUBE 13.5 MM O/D X 5 MM BORE X4.25 MM WALL THICKNESS M/L OF 295 MM.

GRADE YST-240 of IS:1161-1979 (Except for Dimensions).

ERW MILD STEEL TUBE 6 MM NOMINAL BORE- 10.2 MM O/D GRADE YST-240.

IS:1161-1979(EXCEPT FOR DIMENSION)

DIAMMONIUM PHOSPHATE

AS PER REQUIREMENT AND SPECIFICATION