PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

PETROLIUM COKE (CPC) AS PER SPECIFICATION IS-8502:1977 REVISED 1994. PACKED IN 50 KGS.POLY BAG. GRADE A

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.

DRG.REGD NO.17244/1

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

VAPOUR CORROSION INHIBITOR (VCI) LOW DENSITY POLY-ETHYLENE BAGS.SIZE 250MM (LENGTH)X75MM(WIDTH)X0.1MM(+/-10%) THICKNESS.

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

CERAMIC FIBRE BLANKET ROLL AS PER IS 15402 :2003 (TYPE-II) -25 MM THICK. 610 MM WIDTH. 7620 MM LONG .DENSITY = 128 KG/CU MTR. WORKING - TEMPERATURE 1400 DEGREE CENTIGRADE

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

THREAD MILLING HOB AS PER DRG NO - NCC/444D.

DRG NO - NCC/444D.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

COLD ROLLED STEEL STRIP OF SIZE 0.80MM+0.04MM/-0.02MM THICK X 90MM+/-0.50MM WIDE X 2000MM TO 2500MM(APPROX)LONG ALUMINIUMKILLED AND BEST SURFACE FINISHED CONDITION TO SPECN.IS:513 /1994 GR.DD(DEEP DRAWN QUALITY),TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

CLAMP FOR T-72 BARREL & LFG AT GHT SECTION AS PER DRG. NO. HT-169

DRG. NO. HT-169

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SUSPENSION BEAM FOR PIT TYPE FURNACE IN GHT SECTION AS PER SKETCH NO.HT/72R1, CHEMICAL COMPOSITION:- C=0.15-0.25%,Si=1.5-1.8% Mn=1.0-2.0%,Ni=50-60% Cr=10-15%, S&P=0.035% MAX

SKETCH NO.HT/72R1

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

DRG. NO.FD 672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF HOT ROLLED STEEL ROUND BAR 52 MM DIATO 46.5 MM DIA (TORSION BAR) BY PEELING AND STRAIGHTENING OPERATION AS PER NEW SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

CONVERSION OF FORGING(T-72 CASING) FROM DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115 AS PER SCOPE OF WORK

DRG. NO. FGK/FORGE/113/3 INTO MACHINED DRG. NO. SK-6115

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL

CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL

PIN FIRING D S CAT NO-1005-000831 IN FINISHED CONDITION OFSMG 9MM CARBINE 1A1.DC(I) 24776-SA-DT.15-07-2000.,

PIN FIRING D S CAT NO-1005-000831 IN FINISHED CONDITION OFSMG 9MM CARBINE 1A1.DC(I) 24776-SA-DT.15-07-2000.,

D S CAT NO-1005-000831

GAS CYLINDER COVER MOULDING FOR JVPCDRG NO. 0204-03-02-00-00-001-00XA,

GAS CYLINDER COVER MOULDING FOR JVPCDRG NO. 0204-03-02-00-00-001-00XA,

DRG NO. 0204-03-02-00-00-001-00XA,

BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,

BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,

DRG. NO. 0204-03-03-01-12-000-00DA

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

DS CAT NO.1005-006633

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

DRG.NO.SKM-309*1

CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.,

CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.,

DS CAT NO.5140-000279

SCREW SOCKET HEAD TO DS CAT NO. 5305-005081 DC(I)26372-SA DT.16-8-07 IN FINISHED CONDITION.,

SCREW SOCKET HEAD TO DS CAT NO. 5305-005081 DC(I)26372-SA DT.16-8-07 IN FINISHED CONDITION.,

DS CAT NO. 5305-005081

ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,

ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,

DS CAT NO.1005-000358

BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,

BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,

DRG NO 23055A,SKM-902*1

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,

BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,

DRG NO-PHMK-IV-3-1-3

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

DS-CATNO.4930-000799

• Machining and Fabrication work

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION .,

CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION .,

(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITIONSMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

DS CAT NO 1005-000896

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,

GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02IN FINISHED CONDITION.,

GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02IN FINISHED CONDITION.,

DS CAT NO.1005-006843

PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),

PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),

DS CAT NO. 1005-000461

TELESCOPIC ROD, RETURN SPRING AS PER DS CAT NO. 1005- 006845DC(I) NO.25343-SA, DT.26.04.02,

TELESCOPIC ROD, RETURN SPRING AS PER DS CAT NO. 1005- 006845DC(I) NO.25343-SA, DT.26.04.02,

DS CAT NO. 1005- 006845

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993

POLYCHLOROPRENE ADHESIVE TO IND/ME/945(PROV), DC NO-2951-ME, DT.02.02.1993

SLAG BOX FOR ELECTRIC ARC FURNACE AS PER DRG NO - 15 ARC/1000/161/1 R1

SLAG BOX FOR ELECTRIC ARC FURNACE AS PER DRG NO - 15 ARC/1000/161/1 R1

DRG NO - 15 ARC/1000/161/1 R1

LINK AS PER MSF SK NO.-HT/85 R2 OF NICHROME STEEL OF CHEMICAL COMPOSITION: C=0.15-0.25%, Si=1.5-1.8%, Mn=1.0-2.0%, Ni=50-60%, Cr=10.0-15.0%, S&P=0.35% EACH.

LINK AS PER MSF SK NO.-HT/85 R2 OF NICHROME STEEL OF CHEMICAL COMPOSITION: C=0.15-0.25%, Si=1.5-1.8%, Mn=1.0-2.0%, Ni=50-60%, Cr=10.0-15.0%, S&P=0.35% EACH.

MSF SK NO.-HT/85 R2

STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.

STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.

HIGH ALUMINA ROOF SET FOR 15 TON ARC FURNACE AS PER MSF DRG. NO. 15-ARC/1000/28 R6

HIGH ALUMINA ROOF SET FOR 15 TON ARC FURNACE AS PER MSF DRG. NO. 15-ARC/1000/28 R6

MSF DRG. NO. 15-ARC/1000/28 R6

PHOSPHATING OF BALLISTIC CAP 30 MM. BMP-11 SPECIFICATION - GOST 9.301-78 AS PER SCOPE OF WORK ENCLOSED.

PHOSPHATING OF BALLISTIC CAP 30 MM. BMP-11 SPECIFICATION - GOST 9.301-78 AS PER SCOPE OF WORK ENCLOSED.

FLAT DRILL AS PER MSF DRG REGD NO. 17254 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/520 .

FLAT DRILL AS PER MSF DRG REGD NO. 17254 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/520 .

DRG NO - NCC/520

MACHINING OF 30 MM BMP-II CARTG. CASE AS PER SCOPE OF WORK (AS PER MSF DRG. NO. NCC/689/1)

MACHINING OF 30 MM BMP-II CARTG. CASE AS PER SCOPE OF WORK (AS PER MSF DRG. NO. NCC/689/1)

DRG. NO. NCC/689/1

"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416 OTHER DETAILS FOR WORKS AND INSPECTION. THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "

"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416 OTHER DETAILS FOR WORKS AND INSPECTION. THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "

DRG.NO.- NCC/416

• As per Scope of Work

• As per Scope of Work

SURFACE MACHINING OF STEEL BLANKS AS PER DRG. NO. SC/30/MISC-1. DATED 03-01-97 SCOPE OF WORK ATTATCHED.

SURFACE MACHINING OF STEEL BLANKS AS PER DRG. NO. SC/30/MISC-1. DATED 03-01-97 SCOPE OF WORK ATTATCHED.

DRG. NO. SC/30/MISC-1

FLAT FORM TOOL AS PER MSF DRG REG NO - 17257 FOR MULTI SPNDLE AUTOMATIC M/C DRG NO - NCC/517 R2 WITH TITANIUM - ALUMINIUM - NITRIDE (TIALN) COATING.

FLAT FORM TOOL AS PER MSF DRG REG NO - 17257 FOR MULTI SPNDLE AUTOMATIC M/C DRG NO - NCC/517 R2 WITH TITANIUM - ALUMINIUM - NITRIDE (TIALN) COATING.

DRG NO - NCC/517 R2

SPADE DRILL AS PER MSF DRG REG NO - 17255 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/518 R1 .

SPADE DRILL AS PER MSF DRG REG NO - 17255 FOR MULTI SPINDLE AUTOMATIC M/C DRG NO - NCC/518 R1 .

DRG NO - NCC/518 R1

LIME STONE TO SPECN. I.S.4140/1978 GRADE I;LUMP SIZE:BETWEEN 2" TO 6".IT IS ESSENTIAL THAT THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER.THE FIRM HAS TO PAY CESS TO THE EXTENT OF MATERIAL SUPPLIED @ Rs.1.00 PER MT DIRECTLY TO THE LABOUR WELLFARE COMMISSIONER UNDER INTIMATION TO METAL&STEELFACTORY.

LIME STONE TO SPECN. I.S.4140/1978 GRADE I;LUMP SIZE:BETWEEN 2" TO 6".IT IS ESSENTIAL THAT THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER.THE FIRM HAS TO PAY CESS TO THE EXTENT OF MATERIAL SUPPLIED @ Rs.1.00 PER MT DIRECTLY TO THE LABOUR WELLFARE COMMISSIONER UNDER INTIMATION TO METAL&STEELFACTORY.

CALCIUM SILISIDE CORED WIRE -ROUND 9 MM DIA. POWDER SPECN.: Ca:28-33%,Si:55-65%,C:1.0% MAX.,Al:1.5% MAX.,S:0.05% MAX.,P:0.05% MAX.,Fe:4.5% MIN.POWDER WEIGHT:105+/-10 GMS/MTR.TYPE:HORIZONTAL FLIPPING TYPE COIL.PACKING:IN CAGED,PALLETISED & PLASTIC WRAPPED COILS.EXACT POWDER CONTENT TO BE DISPLAYED.

CALCIUM SILISIDE CORED WIRE -ROUND 9 MM DIA. POWDER SPECN.: Ca:28-33%,Si:55-65%,C:1.0% MAX.,Al:1.5% MAX.,S:0.05% MAX.,P:0.05% MAX.,Fe:4.5% MIN.POWDER WEIGHT:105+/-10 GMS/MTR.TYPE:HORIZONTAL FLIPPING TYPE COIL.PACKING:IN CAGED,PALLETISED & PLASTIC WRAPPED COILS.EXACT POWDER CONTENT TO BE DISPLAYED.

FLOUROSPAR FOR ESR WITH CHEM. COMP:CaF2: 95% MIN,SiO2:2.0% MAX,CaCO3: 1.0% MAX,S:0.1% MAX,MIXED OXIED:1.5% MAX,P2O5: 0.02%MAX,Pb:TRACE, MOISTURE:0.1%, MAX.Fe2O3 SHOULD NOT BE MORE THAN 01 %, (GRAIN SIZE:POWDER FORM,02 MM MAX) PACKING : 50 KG AIR TIGHT HDPE BAG.

FLOUROSPAR FOR ESR WITH CHEM. COMP:CaF2: 95% MIN,SiO2:2.0% MAX,CaCO3: 1.0% MAX,S:0.1% MAX,MIXED OXIED:1.5% MAX,P2O5: 0.02%MAX,Pb:TRACE, MOISTURE:0.1%, MAX.Fe2O3 SHOULD NOT BE MORE THAN 01 %, (GRAIN SIZE:POWDER FORM,02 MM MAX) PACKING : 50 KG AIR TIGHT HDPE BAG.

FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIFICATE FROM NABL ACCREDITED LABORATARY.

FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIFICATE FROM NABL ACCREDITED LABORATARY.

LEAD PIG TO SPECIFICATION = IS:27-1992(RE-AFFIRMED 2003) Gr.99.97% .

LEAD PIG TO SPECIFICATION = IS:27-1992(RE-AFFIRMED 2003) Gr.99.97% .

ALUMINIUM WIRE 9 MM DIA. IN COIL FORM TO SPECIFICATION IS :1253-1992 , REAFFIRMED 2001. GRADE 2 ; Chem.Comp. : Al.:97.0 % Min., Cu:2.0% Max,Zn:0.5% Max, Mg.: 0.5% max,Tin: 0.2% Max , Arsenic : 0.20% max , Bismuth: 0.20 % max.Total of Cu , Zn ,Mg,Si,Fe,Sn,Arsenic & Bismuth : 3.0% Max.

ALUMINIUM WIRE 9 MM DIA. IN COIL FORM TO SPECIFICATION IS :1253-1992 , REAFFIRMED 2001. GRADE 2 ; Chem.Comp. : Al.:97.0 % Min., Cu:2.0% Max,Zn:0.5% Max, Mg.: 0.5% max,Tin: 0.2% Max , Arsenic : 0.20% max , Bismuth: 0.20 % max.Total of Cu , Zn ,Mg,Si,Fe,Sn,Arsenic & Bismuth : 3.0% Max.

7-PLY CORRUGATED PACKING BOX AS PER MSF DRG NO.NCC-418 R1 BURSTING STRENGTH 235 N/SQ.CM(24 KG/SQ.CM) AS PER I.S 7151:9991.

7-PLY CORRUGATED PACKING BOX AS PER MSF DRG NO.NCC-418 R1 BURSTING STRENGTH 235 N/SQ.CM(24 KG/SQ.CM) AS PER I.S 7151:9991.

MSF DRG NO.NCC-418 R1

QUICK LIME FOR STEEL MELTING AND REFINING CaO 88% min.MgO 5% max.SiO2 2% max, Size:2-3 inch Dust Free AS PER THE SCOPE OF WORK ENCLOSED.

QUICK LIME FOR STEEL MELTING AND REFINING CaO 88% min.MgO 5% max.SiO2 2% max, Size:2-3 inch Dust Free AS PER THE SCOPE OF WORK ENCLOSED.

S.G.IRON INGOT MOULD TO SIZE 23''X2100 MM AS PER DRG. NO-OH /1012/152 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT.APPROVEDLAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.

S.G.IRON INGOT MOULD TO SIZE 23''X2100 MM AS PER DRG. NO-OH /1012/152 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT.APPROVEDLAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.

DRG. NO-OH /1012/152 R1

MAGNESITE RAMMING MASS "Chemical Composition :-MgO - 85% Min SiO2-8% Max.,A12O3-6% Max.,CaO-3% Max.,Fe2O3-2.5% Max.,S -0.030% Max.,P-0.020% Max.,L.O.I-1.2% Max., Moisture-1.3% Max.,Size:1- 5 mm.(90%),Rest(10%) fines.

MAGNESITE RAMMING MASS "Chemical Composition :-MgO - 85% Min SiO2-8% Max.,A12O3-6% Max.,CaO-3% Max.,Fe2O3-2.5% Max.,S -0.030% Max.,P-0.020% Max.,L.O.I-1.2% Max., Moisture-1.3% Max.,Size:1- 5 mm.(90%),Rest(10%) fines.

SOAP FLAKE SPECIAL FOR SOPENIFICATION OF STEEL FOR COLD DRAWING OPERATION OF STEEL CARTRIDGE CASES.AS PER I.S SPECN.10513-1983 TABLE 1 CLAUSES 4.4, 8.1 & 8.3 TYPE- 1.

SOAP FLAKE SPECIAL FOR SOPENIFICATION OF STEEL FOR COLD DRAWING OPERATION OF STEEL CARTRIDGE CASES.AS PER I.S SPECN.10513-1983 TABLE 1 CLAUSES 4.4, 8.1 & 8.3 TYPE- 1.

STABLIZER FOR STEEL CARTG. CASE FOR PHOSPHATING OPERATION. MAIN INGREDIENT IS SODIUM NITRITE(CASE: 7632-00-0)

STABLIZER FOR STEEL CARTG. CASE FOR PHOSPHATING OPERATION. MAIN INGREDIENT IS SODIUM NITRITE(CASE: 7632-00-0)

SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)

SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)

SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)

SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)

DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRYCAN.

DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRYCAN.

PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) IN HDPE JARRYCAN

PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) IN HDPE JARRYCAN

PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE IMPURITIES ETC.Zn% 9.6 TO 10.6,P2O5% 16.3 TO 17.7

PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE IMPURITIES ETC.Zn% 9.6 TO 10.6,P2O5% 16.3 TO 17.7

TOP PLATE & BOTTOM PLATE AS PER DRG NO - LFVD/1000/32.

TOP PLATE & BOTTOM PLATE AS PER DRG NO - LFVD/1000/32.

DRG NO - LFVD/1000/32.

BOTTOM FLAT TOOL FOR 2650 MT FORGING PRESS DRG.NO.NGF/282 R2

BOTTOM FLAT TOOL FOR 2650 MT FORGING PRESS DRG.NO.NGF/282 R2

DRG.NO.NGF/282 R2

"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . "

"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . "

MSF DRG NO - ESR/1000/03

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500 MM,STA 5V2,V2A,V2B, OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A) 1964, GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500 MM,STA 5V2,V2A,V2B, OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A) 1964, GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4

USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP,

USER'S MANUAL FOR REVOLVER 32(7.65MM)(MODIFIED) INHINDI & ENGLISH (BILINGUAL) IN BOOKLET FORM WITH ENVELOP,

PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHEDCONDITION COMPLETE OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT.09-06-04.

PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHEDCONDITION COMPLETE OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT.09-06-04.

D S CAT NO-1005-000881

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573RNOTE: REVOLVER CLIP COVER OF BUFF BURNISH(HARNESS LEATHER) DRUM DYED AS PER IS:580COLOUR:BLACK/BROWN/BURGANDI

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573RNOTE: REVOLVER CLIP COVER OF BUFF BURNISH(HARNESS LEATHER) DRUM DYED AS PER IS:580COLOUR:BLACK/BROWN/BURGANDI

DRG. NO. SK- 5573R

I.C FEED ARM TO DRG.NO.SKM-769*2

I.C FEED ARM TO DRG.NO.SKM-769*2

DRG.NO.SKM-769*2

• INVESTMENT CASTING

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM)

REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM)

SK-5734R

PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008

PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008

DRG. NO. PH-7-3

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2.,

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2.,

RIVET, COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876FFOR COCKING H/GUIDE & LOCKING SHOULDER

RIVET, COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876FFOR COCKING H/GUIDE & LOCKING SHOULDER

DRG NO. SKM 876

DESKTOP COMPUTER WITH TFT MONITOR Intel core i7 6th Generation with operating system Windows-10.

The detailed Description as per attached Annexure-'A'

UPGRADATION OF LOCAL AREA NETWORK (LAN) GIGA NETWORK UPGRADATION OF LOCAL AREA NETWORK (LAN) GIGA THROUGH LAN SWITCHES AND FIBER & UTP STRUCTURAL CABLING.

TERMS & CONDITIONS AND REQUIREMENT OF HARDWARE & DRAWING AS PER ATTACHED ANNEXURE

TRAINING AND CONSULTANCY FOR AS9100D Impart training to Group 'A' & 'B' Officers and Provide consultancy for documentation for AS9100D

Impart training to Group 'A' & 'B' Officers and Provide consultancy for documentation for AS9100D

CHAIR WITH CUSHION AND BACK REST

PARTICULARS AS PER ANNEXURE

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE

SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE

As Per Drg.

As Per Drg.