CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B

CELL GRATICULE TO DRG.MCT-1143/1 FOR SIGHT UNIT CASED 102B

MCT-1143/1

FORE SIGHT DRG.NO.IRDE-1035/57

FORE SIGHT DRG.NO.IRDE-1035/57

IRDE-1035/57

REAR SIGHT DRG.NO-IRDE-1035/58

REAR SIGHT DRG.NO-IRDE-1035/58

IRDE-1035/58

THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A

THUMB PIECE TO DRG.NO.MCT-3246/1 (SHEET-2 OF 3) FOR SIGHT DIAL 104A

MCT-3246/1 (SHEET-2 OF 3)

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO.26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO.26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND

DS CAT NO.1005-007775

• Machining & Assy.

• As per attached document.

REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11,

REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11,

As per drqwing

STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11FOR REVOLVERD.A. NO. 29/06 DT. 03.07.06,

STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVERD.A. NO. 29/06 DT. 03.07.06,

PH-1-11

STEEL FORGING OF BLOCK GAS TO DRG.NO. RFI SK NO.4813-S*6,

STEEL FORGING OF BLOCK GAS TO DRG.NO. RFI SK NO.4813-S*6,

RFI SK NO.4813-S*6

SEAR SAFETY IN FINISHED CONDITION AS PER DRG. NO.-ARDE/SK-2689/63(DS CAT NO.1005-007738)DC(I)N0.26743-SA,DT.26.02.2015,

SEAR SAFETY IN FINISHED CONDITION AS PER DRG. NO.-ARDE/SK-2689/63(DS CAT NO.1005-007738)DC(I)N0.26743-SA,DT.26.02.2015,

DRG. NO.-ARDE/SK-2689/63(DS CAT NO.1005-007738)

COVER & PLATE BRAZING TO DS CAT 1005-008010DC(I)26541-SA DT.11.11.2010 CONSISTING OF FOLLOWING 1) COVER TO DS CAT 1005-008008 DC(I) 26744-SA,DT. 03.03.152)PLATE REAR COVER TODS CAT NO. 1005-008009 DC(I)NO.26516-SA DT 26.06.2010,

COVER & PLATE BRAZING TO DS CAT 1005-008010DC(I)26541-SA DT.11.11.2010 CONSISTING OF FOLLOWING 1) COVER TO DS CAT 1005-008008 DC(I) 26744-SA,DT. 03.03.152)PLATE REAR COVER TODS CAT NO. 1005-008009 DC(I)NO.26516-SA DT 26.06.2010,

As per drawing

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044

GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),

GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),

As per drawing

TIMBER SOFT WOOD CONIFEROUS PLANKS GD.1 SPECIS CHIRSPECN. NO IS-5247 (PT II)1983 SIZE 8"X3/4"X8' FEET.,

TIMBER SOFT WOOD CONIFEROUS PLANKS GD.1 SPECIS CHIRSPECN. NO IS-5247 (PT II)1983 SIZE 8"X3/4"X8' FEET.,

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

DRG NO SK-5377R*1

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

• Machining and Assy.

• As per manufacturing Technology machining document

I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*.IN HEAT TREATED CONDITION.D.A. NO. 84/05

I.C. FOR BRACKET TO DRG. NO. SK- 4760/2*.IN HEAT TREATED CONDITION.D.A. NO. 84/05

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1

SHADE OPT. INST. DRG.NO.1035/61

SHADE OPT. INST. DRG.NO.1035/61

DRG.NO.1035/61

RING SECURING TO DRG. MCT-1119/1 FOR SIGHT UNIT CASED 102B

RING SECURING TO DRG. MCT-1119/1 FOR SIGHT UNIT CASED 102B

MCT-1119/1

FLY NUT AS PER DRG.NO CII-399/27 FOR CHEST SPARE PARTS

FLY NUT AS PER DRG.NO CII-399/27 FOR CHEST SPARE PARTS

CII-399/27

SCREW DRG NO.MCT-1125/1

SCREW DRG NO.MCT-1125/1

MCT-1125/1

SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2.

SODIUM ALUMINIUM FLUORIDE (CRYOLITE) TO JSS-6810-73-2010 REV-2.

CASE DRG.NO.:OS-34611

CASE DRG.NO.:OS-34611

OS-34611

CAP TO DRG.NO, MCT-2433 FOR D-7

CAP TO DRG.NO, MCT-2433 FOR D-7

MCT-2433

BEARING DRG.NO.OS-13617

BEARING DRG.NO.OS-13617

OS-13617

BATTERY COUNTER DRG.NO.OS-13589

BATTERY COUNTER DRG.NO.OS-13589

OS-13589

BLOCK DRG.NO.MCT-2485

BLOCK DRG.NO.MCT-2485

MCT-2485

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

MCT-2835

FRAME TO DRG.NO. MCT-2475

FRAME TO DRG.NO. MCT-2475

MCT-2475

TAPE COTTON MEDIUM PROOFED SIZE: 25MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-MEDT.12.12.2002.

TAPE COTTON MEDIUM PROOFED SIZE: 25MM WIDE +/- 2.5MM TO SPECN: IND/ME/888(PROV) DC NO-3754-MEDT.12.12.2002.

NUT TO DRG.NO.MCT-1131/1 FOR SIGHT UNIT CASED 102B

NUT TO DRG.NO.MCT-1131/1 FOR SIGHT UNIT CASED 102B

MCT-1131/1

CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8

CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8

IRDE-1076/8

BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B

BEARING TO DRG.-MCT-1123/1 FOR SIGHT UNIT CASED 102B

MCT-1123/1

KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

KNOB TO DRG, MCT-1150/2 FOR SIGHT UNIT CASED 102B

MCT-1150/2

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

CAP PROTECTIVE DUST & MOISTURE SEAL TO DRG.NO MCT-3234 FOR D-7

MCT-3234

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

PIVOT TO DRG NO. MCT-1100/1

PIVOT TO DRG NO. MCT-1100/1

MCT-1100/1

RING DRG.NO.MCT-2430

RING DRG.NO.MCT-2430

MCT-2430

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7

MCT-2459

NUT TO DRG.NO.MCT-2451

NUT TO DRG.NO.MCT-2451

MCT-2451

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

STRAP TO DRG PT NO.ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL:- TAPE COTTON MEDIUM PROOFED SIZE: 37MM WIDE X 880 MM LONG TO SPECN.IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

FIRE TRANSMITTING TUBES MKG.51 MM TO ARDE-1934, IRW 203. DC NO.37068-A DT.14.09.2006.

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

ADHESIVE TAPE WP FABRIC-25MM TO SPEC: IND/ME/790(b)

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

HANDLE ASSEMBLY TO DRG.NO-SK 4407*

SK 4407*

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976,DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DSCAT NO. 1005-557932 IN BLACK COLOUR,

As per drawing

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36OR GD 606 M36,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

SHOOTING REST FOR JVPC DRG.NO.0204-03-02-00-00-000-00AA,

DRG.NO.0204-03-02-00-00-000-00AA,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,

DRG.NO.SK-4745*2,

• as per attachment

• as per attachment

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

CATCH COCKING HANDLE (MOULDING) D.S. CAT 1005-007747 D.C. No. 26532-SA Dt 30.07.10 IN FINISHED CONDITION (Brown).

DRG NO. CQA(SA)SK - 998DS CAT NO. 1005-560839,

• Machining & assy.

• As per attached document

SILENCER JVPC 5.56MM

SILENCER JVPC 5.56MM

As per drawing

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) ,TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) , TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

WASHER LEATHER LUBRICATED,OD:59.69MM, ID:48.26MM, THICKNESS: 2.03MM REF.DRG.NO:ISX-343, DS CAT NO 5330-003641. DCI 36265-A DT.02.04.97.

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

DRG.6387456, DC. NO-36569-A, DT-22.06.99, FOR 155MM SHELL M107(SIZE-45MM DIA X 10MMTHICK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH,SEMI GLOSSY TO SPECN:IS.138- 1992(3RD REV.) (TO BE SUPPLIED IN 500ML PACK)

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

KEY AMMUNITION 39 A TO DRG PART NO.IUX 144A, DC NO.35916-A, DT.21.02.95 TO SPECN. CQA (A) 1817(t) DC 37096-A, DT.06.03.2007.

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE)

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TODRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817(t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PACK).

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

APC-5(CEMENT RD-1286)TO JSS-8030-20 :2009 (REV-3) DC NO-4051-ME, DT.08.01.2010 [TO BE SUPPLIED IN 500 GRAM PACK]

COVER 678-71-CD111

AS SPECIFIED IN THE TENDER

678-71-CD111

PACKING 675-64-CD243

AS SPECIFIED IN THE TENDER

675-64-CD243

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

CLAMP SHELL TYPE CHARGING BUCKET AS PER DRAWING NO.-OH-1032/49B R1

DRAWING NO.-OH-1032/49B R1

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

20 TON LADLE FOR 20/22 TON EAF AS PER DRG.NO.SMR-402.

DRG.NO.SMR-402

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

TRUMPET FOR BOTTOM POURING MOULD OF 20/22 TON EAF AS PER DRG NO. SMR-401

DRG NO. SMR-401

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

26INCH X 1900 MM OCTAGONAL S.G.IRON MOULD. AS PER DRG. NO. OH-386

DRG. NO. OH-386

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

LIME STONE (ESRGRADE) TO SPECIFICATION IS -4140/1978,REAFFIRMED -2000 GRADE - 1: LUMP SIZE 40 MM TO 60 MM . THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER AND MAXIMUM 05% UNDER SIZE MATERIAL IS ALLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DE-PLATING & ZINC PLATING FOLLOWED BY CHROMATISING ON 30 MM CARTRIDGE CASE AS PER DRG.NO.NCC-416 R1. OTHER DETAILS FOR WORKS AND INSPECTION, SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED.

DRG.NO.NCC-416 R1

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.

SLIDE GATE MECHANISM CONSISTING OF (a) ADOPTER PLATE FOR MODEL 3150 (b) FLOCON MODEL 3150 STD. MECHANISM FOR BELL CRANK SYSTEM INCLUDING MOUNTING PLATE,CONNECTION ROD BUT WITHOUT SPRINGS/THERMO DYNAMIC ELEMENTS.