OIL BOTTLE AS PER DRG No K 9008 WITH FIRMS MATERIAL

AS PER DRG No K 9008 WITH FIRMS MATERIAL

K 9008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

K 9007STR

• AS PER DRAWING

• SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

BRUSH AS PER DRG No K 9003* WITH FIRMS MATERIAL

AS PER DRG No K 9003* WITH FIRMS MATERIAL

K 9003*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

K 9011STR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL

AS PER DRG No K 9002 WITH FIRMS MATERIAL

K 9002

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL

AS PER DRG No. K 9001 WITH FIRM'S MATERIAL

K 9001

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL

AS PER DRG No. K 7000 WITH FIRM'S MATERIAL

K 7000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL

AS PER DRG No. K 5000 WITH FIRMS MATERIAL

K 5000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL

AS PER DRG No.K-2050 WITH FIRMS MATERIAL

K 2050

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

K 2040 STAR 7

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL

AS PER DRG No.TAR-RB-K-1026

TAR-RB-K-1026

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLATE BUTT TO DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

29P 0049

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

32P 4002*3

BRUSH CLEANING BARREL TO DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

AS PER DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

32P 5001

AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB

AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB

DRG. NO. AK 150C-01 CB

Alo Resin Abrasive Cloth of 50 mtrs

IS:715-1976

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015

PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015

S.M Wire Bright Drawn Hard 4.00 mm Dia

IS:280 latest half hard

4020-000298 CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D as per Specification

SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the material shall conform to the sealed pattern held in the custody of The Controller, CQAT&C, Kanpur (iv) hank length should be 270 + 05. - 00

CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO.298 FOR PTAM

IS:SPECN NO.IS:5-1994, JSS:4020-8 ROLL LENGTH 285 MTR. EX-SAMPLING

USED FOR FLOAT

AS PER OPF

IND/TC/2123 (b)

IND/TC/2123 (b)

As per drg. (2A26-02-81)

As per drg. (2A26-02-81)

2A26-02-81

SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR

AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL

K 3001 STR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Arm to casting drg no. D-4082416

Arm to casting drg no. D-4082416

D-4082416

Arm to Drg No. D-6358150

Arm to Drg No. D-6358150

D-6358150

As per requirements & Specifications

As per requirements & Specifications

FINISHED HOUSING TO DRG. NO. 188-94-001 FOR TRAVERSE REDUCTION GEAR UNIT CODE-94 (AS PER VENDOR QUALIFICATION CRITERIA & SCOPE OF WORK IN ANNEXURE-1)

FINISHED HOUSING TO DRG. NO. 188-94-001 FOR TRAVERSE REDUCTION GEAR UNIT CODE-94 (AS PER VENDOR QUALIFICATION CRITERIA & SCOPE OF WORK IN ANNEXURE-1)

188-94-001

For 51mm SMK & illg.

For 51mm SMK & illg.

PARTED BILLETS AS PER DRG. NO.SK-9719/A Steel To Specn. JSS 9510-1 2013 Grade- SS/B-27 For 105MM IFG HE

PARTED BILLETS AS PER DRG. NO.SK-9719/A Steel To Specn. JSS 9510-1 2013 Grade- SS/B-27 For 105MM IFG HE

SK-9719/A

PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG. NO.SK-9748/B & MEETING THE REQUIREMENT AS PER DRG NO SK-5934/C (MATERIAL SPCN: IS:5517 1978.35Mn6Mo3Rs63)

PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG. NO.SK-9748/B & MEETING THE REQUIREMENT AS PER DRG NO SK-5934/C (MATERIAL SPCN: IS:5517 1978.35Mn6Mo3Rs63)

SK-9748/B &SK-5934/C

BS:1449 PS-I-83 grade-43/35 size: 95MM+/-0.25 wide thickness 2.0MM+/-0.06x920+15mm long

BS:1449 PS-I-83 grade-43/35 size: 95MM+/-0.25 wide thickness 2.0MM+/-0.06x920+15mm long

ITV-46

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN

Drg. No.SK-7894/B

Drg. No.SK-7894/B

SK-7894/B

Drg. No.SK-8370

Drg. No.SK-8370

As per OFC Drg. NO. SK-9367/A

As per OFC Drg. NO. SK-9367/A

SK-9367/A

O Ring 188*5.4 As Per Drg No. 86030201030000200PA

O Ring 188*5.4 As Per Drg No. 86030201030000200PA

86030201030000200PA

O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA

O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA

86030201030000200PA

O Ring 191*5.4 As Per Drg No. 86030201090000300PA

O Ring 191*5.4 As Per Drg No. 86030201090000300PA

86030201090000300PA

O Ring 133*4 As Per Drg No. 86030201120000300PA

O Ring 133*4 As Per Drg No. 86030201120000300PA

86030201120000300PA

O Ring 188*5.4 As Per Drg No. 86030201090000300PA

O Ring 188*5.4 As Per Drg No. 86030201090000300PA

86030201090000300PA

Compression Spring to Drg No. 8603 02 01 11 00 004 00PA

Compression Spring to Drg No. 8603 02 01 11 00 004 00PA

8603 02 01 11 00 004 00PA

Torsion Spring to Drg No. 8603 02 01 11 00 010 00PA

Torsion Spring to Drg No. 8603 02 01 11 00 010 00PA

8603 02 01 11 00 010 00PA

Fin Closing Ring As Per Drg No.8603 02 01 11 007 00PA

Fin Closing Ring As Per Drg No.8603 02 01 11 007 00PA

8603 02 11 007 00PA

Drg. No. SK- 8737/D

Drg. No. SK- 8737/D

SK- 8737/D

Arm to Investment Casting Drg No. D-4082394

Arm to Investment Casting Drg No. D-4082394

D-4082394

Housing to Casting Drg No. D-5178463

Housing to Casting Drg No. D-5178463

D-5178463

Magazine Cover Drg No. D-3054626

Magazine Cover Drg No. D-3054626

D-3054626

Feeder Lever ( Investment Casting) Drg No. D-5178461

Feeder Lever ( Investment Casting) Drg No. D-5178461

D-5178461

Slide to Casting Drg No. D-6385161

Slide to Casting Drg No. D-6385161

D-6385161

Case investment casting Drg No. D-3053751

Case investment casting Drg No. D-3053751

D-3053751

ZINC BASED PHOSPHATING SOLUTION MEANT FOR PROTECIVE PURPOSE UNDER PAINT OIL COATING CONFORMING TO IS 6005-1998 (MAKE BERGER/GRAUER & WEIL/CMP ONLY)

ZINC BASED PHOSPHATING SOLUTION MEANT FOR PROTECIVE PURPOSE UNDER PAINT OIL COATING CONFORMING TO IS 6005-1998 (MAKE BERGER/GRAUER & WEIL/CMP ONLY)

Cord Nylon 1785 N Undyed/White

JSS:4020-9-2013(Revision No.3)

Hinge Pin (moulded) As Per Drg No.SK-9433

Hinge Pin (moulded) As Per Drg No.SK-9433

.SK-9433

Moulding of Hinge Pin As Drg No.SK-9209/A

Moulding of Hinge Pin As Drg No.SK-9209/A

SK-9209/A

IS:9686-1980 AMD-I Reaffirmed 2012

IS:9686-1980 AMD-I Reaffirmed 2012

WINTER HEAD SET TSH 4-Z TY 17-08-229-85

WINTER HEAD SET TSH 4-Z TY 17-08-229-85

CAP TO DRG. NO. bw8.635.541 (GSF SK. NO. TF-001) FOR Fz A670 IN FINISHED CONDITION

CAP TO DRG. NO. bw8.635.541 (GSF SK. NO. TF-001) FOR Fz A670 IN FINISHED CONDITION

'RING' TO DRG. NO. bw8.685.029 (GSF SKETCH NO. TF-027) IN FINISHED CONDITION

'RING' TO DRG. NO. bw8.685.029 (GSF SKETCH NO. TF-027) IN FINISHED CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DISC TO DRG.NO. bw S 8.685.000 (GSF SKETCH NO. TF-009) FOR FUZE A670M

DISC TO DRG.NO. bw S 8.685.000 (GSF SKETCH NO. TF-009) FOR FUZE A670M

NAPHTHALENE BALLS

a) The balls shall be white in colour and conform to Grade 1 of IS: 539:1974 (Second Revision of Reaffirmed 1993) b) Approximately 130 +/-10 naphthalene balls shall weigh 1 kg. c) There shall be no stain on the woollen fabric when tested in accordance to the clause 4.2 of specification IS 539: 1974 (Second Revision of reaffirmed 1993) d) Naphthalene balls shall be supplied in polythene packets of 5 kgs each e) Sampling Plan: As per relevant clause of specification.

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

• YES

• YES

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

DRG. NO. IND/ME/29, DC NO. 3604-ME DTD. 13.12.99

• MSME

• CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

• MSME

• METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.

REFINED BEES WAX GRADE-A TO SPECN:-IS-1504-1996 (REAFFIRMED 2002)(3RD REV.) WITH AMENDMENT NO.1 JUNE 2007.WITH MELTING POINT 61 DEGREE CENTIGRADE MIN

SPECN:-IS-1504-1996 (REAFFIRMED 2002)(3RD REV.) WITH AMENDMENT NO.1 JUNE 2007

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.

TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002.

STRONTIUM NITRATE FOR PYROTECHNIC COMPOSITION SIZE : PASS SIEVE 60 BSS AND 100% RETAINED ON 170 BSS SIEVE TO SPECN:IS-5671-1984 (FIRST REVISION)(REAFFIRMED 2005) AMENDMENT-1AUGUST-1990 DC- 5371-ME DT. 28.07.2015.

SPECN: IS-5671-1984 (FIRST REV.) (REAFFIRMED 2005) AMENDMENT-1 AUGUST-1990 DC-5371-ME DT 28.07.2015

SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)

SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)

POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003

POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003

POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 %

POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 %

POTASSIUM CHLORATE TECHNICAL GR-1 IN CRYSTAL FORM SPECN:- IS-708-1987(2nd REV)REAFFIRMED 2005 DC NO.3925-ME DT.13-12-2008 EXCEPT FOR BROMATE CONTENT WHICH SHOULD NOT EXCEED0.02% AS BRO3 SIZE 120/170A I.e. 120 BSS ALL PASS & 170 BSS80% RETENTION.

SPECN:- IS-708-1987(2nd REV)

POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 %

POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 %

LEATHER CHAMOIS, SKIN GR-2, 46cm X 46cm TO SPEEN:-IS-1017- 1983 (2nd REVISION) AMENDMENT NO.1 AUG'91 AND C I T C KANPURPACKING AND MARKING SCHEDULE NO COA T & C/TC 13/23(a).

Specn:-IS-1017-1983(2ND REVISION)

LEAD FERROCYANIDE TO SPECN IND/ME/769 DC NO. 3754-ME DATE 12-12-02 PARTICAL SIZE 0.001 TO 0.005 MM.

SPECN: IND/ME/769 DC NO. 3754-ME DT. 12/12/02

BORON CARBIDE,SPHERICAL OR CHIPS 8 TO 10MM,BORON CONT-78.5 TO 80.5 %, CARBON CONTENT-18.5 TO 20.5 %, IMPURITIES IN PPm-Fe-80,Si-100.Al-200,0-300,H-50,F&Cl<100,Co<50,Cu-100,Mn-100,Na-100,Ti-50,B2O3-100,MOISTURE-Wt LOSS WHEN HEATED AT 200DEG CENT.FOR 1 HOUR UNDER VACUUM SHOULD NOT EXCEED 500 PPm UOQ kg

BORON CARBIDE,SPHERICAL OR CHIPS 8 TO 10MM

FUZE ANTI-REMOVAL MINE A/T 2B/L ND EMPTY TO DRG NO ARDE-1553 DET NO 1 DRG PT NO IQX-48 GE NO35703-A DT 03.05.94 YO SPECN CQA (A) 1825(C) DC36823-A DT 20.03.02

FUZE ANTI-REMOVAL MINE A/T 2B/L ND EMPTY TO DRG NO ARDE-1553 DET NO 1 DRG PT NO IQX-48 GE NO35703-A DT 03.05.94 YO SPECN CQA (A) 1825(C) DC36823-A DT 20.03.02

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93.

ACID TARTRATE OF POTASSIUM.(POTASSIUM BI TARTRATE)THE POTASSIUM ACID TARTRATE SHELL HAVE THE FOLLOWING COMPOSITION :KHCHO AT STRENGTH 99.9 +/-0.3, EXTRANEOUS SUBSTANCE - NONE,SOLUBILITY IN WATER - 0.03% MAX, MOISTURE (2H AT 100 DEGREEC)0.1% MAX, CHLORIDES SULPHATES : SLIGHT TRACES.

ACID TARTRATE OF POTASSIUM.(POTASSIUM BI TARTRATE)