Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply 700x450x400 mm As per Specification

SPECN-CQA(GS)/US/460

IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE, FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM

IS: 2508-1984, REAFFIRMED 2008 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/540, EXCEPT SEALING SHALL BE OF ADHESIVE TYPE, FLAP SIZE- 10 CM AND ADHESIVE STRIP SHOULD BE MORE THAN 6 MM

IS 168-1993

IS 168-1993

IS- 168 : 1993

IS- 168 : 1993

IS : 168-2002

IS : 168-2002

IS : 168 : 2002

IS : 168 : 2002

IS- 138 : 1992

IS- 138 : 1992

IS : 168/1993

IS : 168/1993

IS- 138 : 1992

IS- 138 : 1992

IS- 138 : 1992

IS- 138 : 1992

JSS-8040-12-1993

JSS-8040-12-1993

A.P.C. 211 TO SPECN JSS 8010-63:2016 (REVISION NO. 4) DC NO.6076-ME DATED 22-06-2017 D S CAT NO. 8010-000-307

JSS 8010-63:2016 (REVISION NO. 4) DC NO.6076 - ME DATED 22-06-2017 D S CAT NO. 8010-000-307

DC NO.6076-ME

JSS-8030-20-1997

JSS-8030-20-1997

JSS 8030-14-1999

JSS 8030-14-1999

JSS 8010-63-2004

JSS 8010-63-2004

JSS 8010-63-2004

JSS 8010-63-2004

JSS-8010-63-2004

JSS-8010-63-2004

JSS 8010-42-1999

JSS 8010-42-1999

PARATROOPER MAGNETIC WRIST COMPASS LUMINOUS (Wrist Compass Luminous for CFF Parachute)

SPECN.NO-ADRDE/CFF/SAFETY-COMP/23/04/SPCN(b) DRG.NO.-ADRDE/PAS/2005/9 A13

Goggles for CFF Parachute

SPECN.NO. ADRDE/PAS/2005/9-A12 ADRDE/PAS/2005/9(e)

MILITARY ALTIMETER LUMINOUS ALTITRACK (Altitrack Altimeters for CFF Parachute)

SPECN-NO:-ADRDE/CFF/SAFETY-ALT/22/03/SPCN DRG.NO.-ADRDE/PAS/2005/9 A11-1

MILITARY CYPRES-2 (Cypres for CFF Parachute)

SPECN.NO:-ADRDE/CFF/SAFETY-CYP/21/02/SPCN(c) DRG.NO:-ADRDE/PAS/2005/9/A-10

SPECN.NO:-ADRDE/CFF/SAFETY-CYP/21/02/SPCN(c) DRG.NO:-ADRDE/PAS/2005/9/A-10

JSS 8010-63-2004

JSS 8010-63-2004

JSS-8030-16-1999

JSS-8030-16-1999

JSS-8010-48-1992

JSS-8010-48-1992

A.P.C. NO. 11 ( WATER PROOFING CEMENT COMPOSITION)RD-1154 TO SPECN. J.S.S.-8030-24 2011 REV NO.2. DC 5086-ME DT. 06/08/2012.

A.P.C. NO. 11 ( WATER PROOFING CEMENT COMPOSITION)RD-1154 TO SPECN. J.S.S.-8030-24 2011 REV NO.2. DC 5086-ME DT. 06/08/2012.

JSS 8010-64-1999

JSS 8010-64-1999

JSS 8010-63

JSS 8010-63

JSS 8030-15-1997

JSS 8030-15-1997

IS-2307-2004 (SECOND REV.)

IS-2307-2004 (SECOND REV.)

IS -1420-1999

IS -1420-1999

IS-2307-2004

IS-2307-2004

MIL-M-382-C( AR)

MIL-M-382-C( AR)

IS-2307-2004

IS-2307-2004

BUTTON BATTERY LR-44, 1.5V (MAXELL/EQUIVALENT)

BUTTON BATTERY LR-44, 1.5V (MAXELL/EQUIVALENT)

HOLDER(LED) FOR TVNE-4B(P) AS PER DRG.NO.OLF/R&D/TVNE-4B&1PA/287

HOLDER(LED) FOR TVNE-4B(P) AS PER DRG.NO.OLF/R&D/TVNE-4B&1PA/287

DRG.NO.OLF/R&D/TVNE-4B&1PA/287

LAMP FILAMENT 2.5 VOLTS, 0.7 WATT, AS PER DRAWING NO. MCT-835/1

LAMP FILAMENT 2.5 VOLTS, 0.7 WATT, AS PER DRAWING NO. MCT-835/1

DRAWING NO. MCT-835/1

WHITE LED 5.0MM DIA X 8.6MM LG ANGLE = 25 DEGREE, VOLTAGE: 3.2V-3.4 V

WHITE LED 5.0MM DIA X 8.6MM LG ANGLE = 25 DEGREE, VOLTAGE: 3.2V-3.4 V

i)“O” Ring 74.3 x 3 To OFAJ Drawing No. FS-3036A. ii)“O” Ring 7.1 x 1.6 To OFAJ Drawing No. FS-3034A.

i)“O” Ring 74.3 x 3 To OFAJ Drawing No. FS-3036A. ii)“O” Ring 7.1 x 1.6 To OFAJ Drawing No. FS-3034A.

FS-3036A and FS3034A

TRANSISTOR AC-128 NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

TRANSISTOR AC-128 NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

SOCKET 2 RM 18 KUZ 7G 1 1V1 GEO.364.126TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.: AU3.895.034 SHEET NO.5.

SOCKET 2 RM 18 KUZ 7G 1 1V1 GEO.364.126TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.: AU3.895.034 SHEET NO.5.

SOCKET 2RM14KPZ4G 1V1 GEO.364.126TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.AU3.895.048 SHEET NO.3

SOCKET 2RM14KPZ4G 1V1 GEO.364.126TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.AU3.895.048 SHEET NO.3

PLUG 2 PMR 18 B 7 WIE 2B EQUIVALENT TO,2 RMG 18 B 7 SH 1E2B JSS STYLE ALENT TO 2 RMG 18 B 7 SH 1E2B REFERANCE CCTM-2PMR/R-18 7-1-M

PLUG 2 PMR 18 B 7 WIE 2B EQUIVALENT TO,2 RMG 18 B 7 SH 1E2B JSS STYLE ALENT TO 2 RMG 18 B 7 SH 1E2B REFERANCE CCTM-2PMR/R-18 7-1-M

PLUG 2RMG14B4SH1E2B GEO.364.140TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.: AU3.895.048 SHEET NO.4.

PLUG 2RMG14B4SH1E2B GEO.364.140TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.: AU3.895.048 SHEET NO.4.

PLUG 2RMG 18 B 7 SH 1E2B GEO.364.140TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.AU3.895.034 SHEEET NO.6

PLUG 2RMG 18 B 7 SH 1E2B GEO.364.140TU NOTE:RUSSIAN NOMENCLATURE AS PER SCHEDULE NO.AU3.895.034 SHEEET NO.6

RESISTANCE FILM COATED 1.5 MEGA OHMS, 0.5 WATT,TOLERANCE +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTANCE FILM COATED 1.5 MEGA OHMS, 0.5 WATT,TOLERANCE +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTANCE FILM COATED 1.5 MEGA OHMS 0.25 WATTS TOLERANCE = 5%

RESISTANCE FILM COATED 1.5 MEGA OHMS 0.25 WATTS TOLERANCE = 5%

THERMISTOR AB4681025/028 TY

THERMISTOR AB4681025/028 TY

Store Drg No M-8194B

Store Drg No M-8194B

AS PER DRAWING / SPECIFICATIONS

CUPRO NICKEL STRIP [SIZE:26-0.2 (W) MM X 0.4+0.03 (T) MM TO SPECN. BS EN 1652-1998,DESIGN CuNi25 WITH %BI RESTRICTED TO 0.002%. MATERIAL CONDITION R290. OXIDATION, BEND AND DENT MARK SHOULD NOT BE PRESENT ON COIL SURFACE

COPPER STRIP SIZE:20+/- 0.1MM(W)x0.7+0.01MM(T) TO SPECN.:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL CONDITION R-220

COPPER STRIP SIZE:20+/- 0.1MM(W)x0.7+0.01MM(T) TO SPECN.:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL CONDITION R-220

COPPER STRIP SIZE:13+/- 0.2MM(W)x0.35+0.02MM(T) TO SPECN.:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL symbol cu ETP material cond.R-220

COPPER STRIP SIZE:13+/- 0.2MM(W)x0.35+0.02MM(T) TO SPECN.:BS EN 1652:1998 DESIGN Cu-ETP MATERIAL symbol cu ETP material cond.R-220

THERMISTOR,TOC-MD 5.75K OHM +/-0.7K OHM SPEC.NO.AF4.681.027TY

THERMISTOR,TOC-MD 5.75K OHM +/-0.7K OHM SPEC.NO.AF4.681.027TY

RESISTANCE 100 OHM,2.5 WATT

RESISTANCE 100 OHM,2.5 WATT

RESISTOR 300 OHMS +/-5%(R-3),0.5 WATT

RESISTOR 300 OHMS +/-5%(R-3),0.5 WATT

POTENTIOMETER MULTI-TURN 1 KILO OHM +/-10%, 64W COMPONENT SHOULD BE MIL GRADE ONLY.

POTENTIOMETER MULTI-TURN 1 KILO OHM +/-10%, 64W COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25 WATT-300 OHM +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25 WATT-300 OHM +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25-390 OHM+-10%

RESISTOR 0.25-390 OHM+-10%

RESISTOR 0.25-510 OHMS+-10%

RESISTOR 0.25-510 OHMS+-10%

RESISTOR 20 KILO OHMS+/-5% 0.5 WATTS, COMPONENT SHOULD BE MIL GRADE ONLY

RESISTOR 20 KILO OHMS+/-5% 0.5 WATTS, COMPONENT SHOULD BE MIL GRADE ONLY

RESISTANCE 2 KOHMS CARBON FILM 0.25 WATT NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 2 KOHMS CARBON FILM 0.25 WATT NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTOR 100 OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 100 OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 1W-300 OHMS +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 1W-300 OHMS +/-5% COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 1.6 KILO OHMS+/-5%, 1 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 1.6 KILO OHMS+/-5%, 1 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25-20 KILO OHMS +-10%

RESISTOR 0.25-20 KILO OHMS +-10%

RESISTOR 2.2 KILO OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 2.2 KILO OHMS +/-5%,0.5 WATT COMPONENT SHOULD BE MIL GRADE ONLY.

RESISTOR 0.25-2.2K OHM +/- 10%

RESISTOR 0.25-2.2K OHM +/- 10%

RESISTANCE 22 KOHMS,0.25 WATTS NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 22 KOHMS,0.25 WATTS NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 47 K OHMS 0.25 WATTS NOTE:SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 47 K OHMS 0.25 WATTS NOTE:SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE VERIABLE 50 KOHM .5

RESISTANCE VERIABLE 50 KOHM .5

RESISTOR 100 OHMS,0.25 WATTS. NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTOR 100 OHMS,0.25 WATTS. NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 200 OHMS 0.25 WATTS AND 5 % TOLLERANCE NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RESISTANCE 200 OHMS 0.25 WATTS AND 5 % TOLLERANCE NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

RELAY REC 10 ( RC4.529.031.06 ) PCO.452.049TY

RELAY REC 10 ( RC4.529.031.06 ) PCO.452.049TY

TRANSISTOR BEL 100P OA,MAKE:BELL

TRANSISTOR BEL 100P OA,MAKE:BELL

TRANSISTOR BEL 100N 1A,MAKE:BELL

TRANSISTOR BEL 100N 1A,MAKE:BELL

TRANSISTOR - 2T-201 OR CK-100

TRANSISTOR - 2T-201 OR CK-100

TRANSISTOR-2T-203 OR CL-100

TRANSISTOR-2T-203 OR CL-100

STABILIZER DIODE 8145 CM3.62.012TY A2R3 OR ZENER DIODE 8.5 VOLTS/0.5 WATT

STABILIZER DIODE 8145 CM3.62.012TY A2R3 OR ZENER DIODE 8.5 VOLTS/0.5 WATT

LED GREEN COLOUR 5MM DIA X 8MM LONG, INTENSITY MATCHED STANDARD DIFFUSED,IR MAX-30MA,IR TYPICAL-10MA,VR MAX-5V, PD MAX-120 MW,VIEWING ANGLE-55 DEGREE, OPERATING TEMP.=(-)55 DEGREE TO 100 DEGREE CENTIGRADE, COMPONENT SHOULD BE MIL GRADE ONLY.

LED GREEN COLOUR 5MM DIA X 8MM LONG, INTENSITY MATCHED STANDARD DIFFUSED,IR MAX-30MA,IR TYPICAL-10MA,VR MAX-5V, PD MAX-120 MW,VIEWING ANGLE-55 DEGREE, OPERATING TEMP.=(-)55 DEGREE TO 100 DEGREE CENTIGRADE, COMPONENT SHOULD BE MIL GRADE ONLY.

I.R.DIODE TL-38(TO CASING),CLEAR PACKAGE VR.(MAX)-1.7MA,PEAK WAVE LG-940NM, VR.(MAX)-5V,POWER DISSIPATION-100 MW, IF.(MAX)-100 MA,RADIANT POWER-120 MW, OPERATING TEMP-30 TO 70 DEG.CENTG. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

I.R.DIODE TL-38(TO CASING),CLEAR PACKAGE VR.(MAX)-1.7MA,PEAK WAVE LG-940NM, VR.(MAX)-5V,POWER DISSIPATION-100 MW, IF.(MAX)-100 MA,RADIANT POWER-120 MW, OPERATING TEMP-30 TO 70 DEG.CENTG. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.