MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

18241

2018000163

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM Description HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A' Specification HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A' Drawing no. Manufacturing Technology Testing / Inspection Facility	21	16362 Metre

18242

128MMETT19001502

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE Description BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE Specification BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE SPECIFICATION.pdf Drawing no. TEND 2383 STAR 8 DRG_TEND_2383_STAR_8.pdf Manufacturing Technology AS PER DRAWING MFG_TECH.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	731 Number

18243

1510/PV/OKAT/2019

Ordnance Factory Katni

The General Manager,
Katni
Katni
Madhya Pradesh
483503

Name	Code	Quantity
CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001 Description CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX. HARDNESS: 65-75 VPN. GRAIN SIZE: 0.05 mm MAX FREE FROM PREF: GRAIN ORIENTATION DEFECT. Specification CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX. HARDNESS: 65-75 VPN. GRAIN SIZE: 0.05 mm MAX FREE FROM PREF: GRAIN ORIENTATION DEFECT. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	0 Metric tonne(1000kg)
CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015 Description CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-400 MM, WT. 90-110 KG. BOW LIMIT 5 MM PER 3 MTRS, HARDNESS: 60-75 VPN GRAIN SIZE : 0.05 MM MAX FREE FROM GRAIN ORIENTATION. Specification CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-400 MM, WT. 90-110 KG. BOW LIMIT 5 MM PER 3 MTRS, HARDNESS: 60-75 VPN GRAIN SIZE : 0.05 MM MAX FREE FROM GRAIN ORIENTATION. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	0 Metric tonne(1000kg)
CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005 Description CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATEST ISSUE). BOW LIMITS : 5MM PER 3 METER MAX. HARDNESS: 60 TO 70 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENT DEFECT. Specification CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATEST ISSUE). BOW LIMITS : 5MM PER 3 METER MAX. HARDNESS: 60 TO 70 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENT DEFECT. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	23.86 Metric tonne(1000kg)
STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166 Description C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX. HARDNESS: 65 TO 75 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERED GRAIN ORIENTATION & DEFECTS Specification C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX. HARDNESS: 65 TO 75 VPN, GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERED GRAIN ORIENTATION & DEFECTS Drawing no. - Manufacturing Technology Testing / Inspection Facility	90	38.8 Metric tonne(1000kg)
C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148 Description C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METER MAX. HARDNESS: 65 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENTATION & DEFECT Specification C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METER MAX. HARDNESS: 65 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM GRAIN ORIENTATION & DEFECT Drawing no. - Manufacturing Technology Testing / Inspection Facility	90	21.58 Metric tonne(1000kg)
C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157 Description C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERRED GRAIN ORIENTATION & OTHER DEFECT Specification C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO 75 VPN GRAIN SIZE: 0.05 MM MAX. FREE FROM PREFERRED GRAIN ORIENTATION & OTHER DEFECT Drawing no. - Manufacturing Technology Testing / Inspection Facility	90	36.424 Metric tonne(1000kg)

18244

107MMEPQ18000368

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
RECUPERATOR SPRING TO DRG NO 5176661 Description RECUPERATOR SPRING TO DRG NO 5176661 Specification RECUPERATOR SPRING TO DRG NO 5176661 Drawing no. Manufacturing Technology AS PER ATTACHMENT 5176661.jpg Testing / Inspection Facility AS PER ATTACHMENT	70	1000 Number

18245

OFBL/ADV/CAP TO DRG AND ANVIL TO DRG

Ordnance Factory Bolangir

The Cheif General Manager
Bolangir
Bolangir
Orissa
767770

Name	Code	Quantity	Approx Value	Select
ANVIL TO DRG NO 9 0643 Description ANVIL TO DRG.NO.9-0643/9- -104/3,DC36309-A,DT.14.7.97.- O.F.BADMAL Specification ANVIL TO DRG.NO.9-0643/9- -104/3,DC36309-A,DT.14.7.97.- O.F.BADMAL Drawing no. Manufacturing Technology Testing / Inspection Facility	63	70000 Number
CAP TO DRG NO 9 0643 Description CAP TO DRG.NO.9-0643/9- -104/1,DC. 37511-A,DT-11.12.18. Specification CAP TO DRG.NO.9-0643/9- -104/1,DC. 37511-A,DT-11.12.18. Drawing no. Manufacturing Technology SUITABLE PRESS MACHINE,SUITABLE SURFACE TREATMENT FACILITY OR TIE-UP FOR THE SAME,SUITABLE FINISHING FACILITY CAP_DRG9.pdf Testing / Inspection Facility SUITABLE MEASURING FACILITY	63	70000 Number

18246

ADV_417_107

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
Supporting Bracket Assy.Drg.No.F1303-029151 Description AS PER DRG.& SPECIFICATION Specification AS PER DRG.& SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility

18247

107MMEPQ19000370

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity
MODIFIED AMMUNITION STAY Description MODIFIED AMMUNITION STAY Specification MODIFIED AMMUNITION STAY Drawing no. MODIFIED_STAY_AMMN__ASSY.pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number
LOADER AUTO SUB ASSY Description LOADER AUTO SUB ASSY (3018096/IAN-4MA) Specification LOADER AUTO SUB ASSY (3018096/IAN-4MA) Drawing no. LOADER_ASSY_(MARGED).pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number
HOPPER AUTO SUB ASSY Description HOPPER AUTO SUB ASSY (2010006/IAN-34-A) Specification HOPPER AUTO SUB ASSY (2010006/IAN-34-A) Drawing no. HOOPER_ASSY_(MARGED).pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number
BREECH CASING SUB ASSY Description BREECH CASING SUB ASSY (IAN-3MA/1002319/2) Specification BREECH CASING SUB ASSY (IAN-3MA/1002319/2) Drawing no. BREECH_CASING_ASSY_(MARGED).pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number
PICTURE OF BREECH MECH SUB ASSY Description BREECH MECHANISM SUB ASSY (10002376/ IAN-38 A) Specification BREECH MECHANISM SUB ASSY (10002376/ IAN-38 A) Drawing no. BREECH_MECH_ASSY.pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number
HACR SUB ASSY Description HACR SUB ASSY (2007475/IAN-33A) Specification HACR SUB ASSY (2007475/IAN-33A) Drawing no. HACR_ASSY.pdf Manufacturing Technology Testing / Inspection Facility	70	50 Number

18248

20180305/PV/0582/EOTF

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
TRADE ASSISTANCE FOR MOULDING OPERATION ALONG WITH THE SUPPLY OF RUBBER COMPOUND SOLE AND HEEL OF DIFFERENT SIZES OF BOOT HIGH ANKLE DVS IMPROVED VERSION Description AS PER TE Specification AS PER TE Drawing no. Manufacturing Technology Testing / Inspection Facility	21	100000 Pair

18249

3183000904

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Ring for Pin Safety Description Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A Specification Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A Drawing no. drawing_No_7606_1A.pdf Manufacturing Technology Testing / Inspection Facility	70	58800 Number

18250

3183000903

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
CLIP COVER FOR REVOLVER DRG NO SK 5573 R Description CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI Specification CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI Drawing no. DRG. NO. SK- 5573R Manufacturing Technology Testing / Inspection Facility	21	8615 Number

18251

OFK/2019/05/IV/IND

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity
O RING 61 X 1 6 PART NO 6413412 LF 2013999914 Description O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966 Specification O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966 Drawing no. O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 22 X 1 PART NO 6413419 LF 2013999915 Description O-RING 22 X 1 PART NO.6413419 DRG.NO.TRD-1-1-2967 Specification O-RING 22 X 1 PART NO.6413419 DRG.NO.TRD-1-1-2967 Drawing no. O-RING 22 X 1 PART NO.6413419 DRG.NO.TRD-1-1-2967 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 5 X 1 PART NO 6414174 LF 2013999916 Description O-RING 5 X 1 PART NO.6414174 DRG.NO.TRD-1-1-2968 Specification O-RING 5 X 1 PART NO.6414174 DRG.NO.TRD-1-1-2968 Drawing no. O-RING 5 X 1 PART NO.6414174 DRG.NO.TRD-1-1-2968 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 29 2 X 2 PART NO 6413414 LF 2013999920 Description O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972 Specification O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972 Drawing no. O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 67 X 2 PART NO 6414120 LF 2013999921 Description O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973 Specification O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973 Drawing no. O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 76 X 2 PART NO 450001307 LF 2013999919 Description O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974 Specification O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974 Drawing no. O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922 Description O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977 Specification O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977 Drawing no. O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 29 1X 1 6 PART NO 6416525 LF 2013999904 Description O-RING 29.1X 1.6 PART NO.6416525 DRG.NO.TRD-1-1-2955 Specification O-RING 29.1X 1.6 PART NO.6416525 DRG.NO.TRD-1-1-2955 Drawing no. O-RING 29.1X 1.6 PART NO.6416525 DRG.NO.TRD-1-1-2955 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 71 X 1 6 PART NO 6413232 LF 2013999911 Description O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956 Specification O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956 Drawing no. O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 71 X 1 8 PART NO 6413211 LF 2013999912 Description O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961 Specification O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961 Drawing no. O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 71 X 1 65 PART NO 6413243 LF 2013999913 Description O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962 Specification O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962 Drawing no. O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 30X2 PART NO 6413212 LF 2013999901 Description O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953 Specification O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953 Drawing no. O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 25 1X1 6 PART NO 6416337 LF 2013999903 Description O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954 Specification O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954 Drawing no. O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 28 X 2 6 PART NO 6413250 LF 2013999906 Description O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957 Specification O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957 Drawing no. O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 67X2 5 PART NO 6413251 LF 2013999907 Description O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958 Specification O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958 Drawing no. O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 26 X 1 2 PART NO 6439353 LF 2013999908 Description O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959 Specification O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959 Drawing no. O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TAGET Number
O RING 37 X 2 4 PART NO 6414441 LF 2013999924 Description O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978 Specification O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978 Drawing no. O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
O RING 78 X 2 PART NO 6409795 LF 2013999909 Description O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960 Specification O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960 Drawing no. O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number

18252

OLF/MM-2/T-1806010327/2018

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
7441120860 CABLE Description CABLE 2 7194.70 02.000 Specification CABLE 2 7194.70 02.000 Drawing no. Manufacturing Technology Testing / Inspection Facility	74	101 Set
MANTLE PART NO 5211891 LF 9911358398 Description MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401 Specification MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401 Drawing no. MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401 Manufacturing Technology as per file attached 9911358398.png Testing / Inspection Facility as per file attached	99	AS PER TARGET Number
BASE PLATE 8.5MM PART NO 404028661 LF 9911358414 Description BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527 Specification BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527 Drawing no. BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527 Manufacturing Technology as per file attached base_plate.png Testing / Inspection Facility as per file attached	99	AS PER TARGET Number
SLIDING DISC PART NO 6416336 LF 9911358402 Description SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427 Specification SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427 Drawing no. SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427 Manufacturing Technology TO BE UPLOADED DUMMYY.pdf Testing / Inspection Facility TO BE UPLOADED	99	AS PER TARGET Number
WAVE SPRING WASHER PART NO 6414691 LF 2013999902 Description WAVE SPRING WASHER PART NO.6414691 TO OEM DRG.NO.304069069/ TRD.DRG.NO 2.2.2541 Specification WAVE SPRING WASHER PART NO.6414691 TO OEM DRG.NO.304069069/ TRD.DRG.NO 2.2.2541 Drawing no. WAVE SPRING WASHER PART NO.6414691 TO OEM DRG.NO.304069069/ TRD.DRG.NO 2.2.2541 Manufacturing Technology Testing / Inspection Facility	20	AS PER TARGET Number
BOOSTER HOUSING PART NO 5229169 LF 9911358424 Description BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653 Specification BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653 Drawing no. BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653 Manufacturing Technology as per file attached 9911358424.png Testing / Inspection Facility as per file attached	99	AS PER TARGET Number
SEALING RING PART NO 6413420 LF 9911358427 Description SEALING RING PART NO. 6413420 TO OEM DRG.NO.301079691/ TRD.DRG.NO. 1.2.2597 Specification SEALING RING PART NO. 6413420 TO OEM DRG.NO.301079691/ TRD.DRG.NO. 1.2.2597 Drawing no. SEALING RING PART NO. 6413420 TO OEM DRG.NO.301079691/ TRD.DRG.NO. 1.2.2597 Manufacturing Technology 1-Machining Facility 2-Heat treatment Facility sealing_ring.PNG Testing / Inspection Facility Relevant Inspection & testing Facility	99	AS PER TARGET Number
SLIPPING RING PART NO 6414119 LF 9911358441 Description SLIPPING RING PART NO.6414119 TO OEM DRG.NO.301069467/ TRD.DRG.NO.1.2.2592 Specification SLIPPING RING PART NO.6414119 TO OEM DRG.NO.301069467/ TRD.DRG.NO.1.2.2592 Drawing no. SLIPPING RING PART NO.6414119 TO OEM DRG.NO.301069467/ TRD.DRG.NO.1.2.2592 Manufacturing Technology TO BE UPLOADED DUMMYY.pdf Testing / Inspection Facility TO BE UPLOADED	99	AS PER TARGET Number
SLIDING DISC PART NO 6413413 LF 9911358440 Description SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627 Specification SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627 Drawing no. SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627 Manufacturing Technology (I) PRESS MACHINE (PUNCHING/ BLANKING FACILITY) 9911358440.png Testing / Inspection Facility (II) DIMENSION MEASURING FACILITY (III) RELEVANT INSPECTION AND TESTING FACILITY	99	AS PER TARGET Number
CABLE TIE PART NO 4102077 LF 2101779000 Description CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674 Specification CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674 Drawing no. CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674 Manufacturing Technology (I) INJECTION MOULDING FACILITY (II) DIMENSION MEASURING FACILITY 2101779000.png Testing / Inspection Facility (III) RELEVANT INSPECTION AND TESTING FACILITY	21	AS PER TARGET Number
PAD PART NO 6414645 FOR 84MM SMOKE LF 9911358501 Description PAD PART NO.6414645 TO OEM DRG NO.304061730/ TRD DRG NO.1.2.2768 Specification PAD PART NO.6414645 TO OEM DRG NO.304061730/ TRD DRG NO.1.2.2768 Drawing no. PAD PART NO.6414645 TO OEM DRG NO.304061730/ TRD DRG NO.1.2.2768 Manufacturing Technology (I) PRESS MACHINE( PUNCHING/ BLANKING FACILITY) 9911358501.png Testing / Inspection Facility (II) DIMENSION MEASURING FACILITY (III) RELEVANT INSPECTION AND TESTING FACILITY	99	AS PER TARGET Number
DAMPING RING PART NO 6416563 LF 2013999905 Description DAMPING RING PART NO.6416563 TO OEM DRG.NO.304101482/ TRD.DRG.NO 2.2.2410 Specification DAMPING RING PART NO.6416563 TO OEM DRG.NO.304101482/ TRD.DRG.NO 2.2.2410 Drawing no. DAMPING RING PART NO.6416563 TO OEM DRG.NO.304101482/ TRD.DRG.NO 2.2.2410 Manufacturing Technology (I) Rubber moulding facility (II) Dimension measuring facility O_RING.png Testing / Inspection Facility (III) Relevant inspection & testing facility	20	AS PER TARGET Number
SLIPPING RING PART NO 5212095 LF 9911358418 Description SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408 Specification SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408 Drawing no. SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408 Manufacturing Technology as per file attached 9911358418.png Testing / Inspection Facility as per file attached	99	AS PER TARGET Number
PRIMER GASKET PART NO 6409794 LF 2013999910 Description PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370 Specification PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370 Drawing no. PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370 Manufacturing Technology 1. RUBBER MOULDING FACILITY primer_gasket_2013999910.pdf Testing / Inspection Facility 1. DIMENSION MEASURING 2. RELEVANT INSPECTION & TESTING FACILITY	20	AS PER TARGET Number
BOX COMPLETE ROUND PART NO 522282 LF 9911358479 Description BOX COMPLETE/ROUND PART NO.5227282. Specification BOX COMPLETE/ROUND PART NO.5227282. Drawing no. BOX COMPLETE/ROUND PART NO.5227282. Manufacturing Technology AS ATTACHED AS ATTACHED 9911358479.jpg Testing / Inspection Facility AS ATTACHED	99	AS PER TARGET Number
BOX 520 8 ROUND PART NO 5227282 LF 9911358477 Description BOX 520:8/ROUND PART NO.5227282 TO OEM DRG.NO.5227282/TRD DRG.NO.2.2.2863. Specification BOX 520:8/ROUND PART NO.5227282 TO OEM DRG.NO.5227282/TRD DRG.NO.2.2.2863. Drawing no. BOX 520:8/ROUND PART NO.5227282 TO OEM DRG.NO.5227282/TRD DRG.NO.2.2.2863. Manufacturing Technology AS ATTACHED 9911358477.png Testing / Inspection Facility AS ATTACHED	99	AS PER TARGET Number
BOX 751 ROUND PART NO 5227284 LF 9911358475 Description BOX 751/ROUND PART NO.5227284 TO OEM DRG.NO.5227284/TRD DRG.NO.2.2.2861 Specification BOX 751/ROUND PART NO.5227284 TO OEM DRG.NO.5227284/TRD DRG.NO.2.2.2861 Drawing no. BOX 751/ROUND PART NO.5227284 TO OEM DRG.NO.5227284/TRD DRG.NO.2.2.2861 Manufacturing Technology as per file attached 9911358475.png Testing / Inspection Facility as per file attached	99	AS PER REQT Number

18253

3183000898

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Stopper Front Spring Recoil for JVPC through MIM route Description Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB Specification Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB Drawing no. 0204-03-02-00-06-005-00DB Drawing_STOPPER_FRONT_SPRING_RECOIL.pdf Manufacturing Technology Testing / Inspection Facility	70	2195 Number

18254

OFMK/COMP/H 432118/18-19

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE Description SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE Specification SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE SET_OF_27_ELX_ITEMS_ENCLOSURE.pdf Drawing no. SET OF 27 ELECTRONIC ITEMS AS PER ENCLOSURE Manufacturing Technology Testing / Inspection Facility	78	16 Set

18255

OLF/MM-2/T-1806010325/2018

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
9927098309 PCB Description PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR EEN MASKING(5)SIZE-50X47.5MMSQ Specification PCB AU7.820.043 Drg No.AU7820043 PCB(DOUBLESIDED PTH)DRG:AU7.82 0.043 &SPCN:OLF/MSD/PCB/01/MOD CONDITIONS:-1-PCB SHOULD BE AS PER JSS-52308.(2)-PTH BASE MATERIAL=GLASS EPOXY BASE,COPP ER CLAD GRADE GF.(3)THICKNESS OF BASE -1.5MM & COPPER FOIL T HICKNESS 50 MICRO MTR. (4) PCB TINPLATED WITH PROVISION OF GR EEN MASKING(5)SIZE-50X47.5MMSQ Drawing no. Manufacturing Technology Testing / Inspection Facility	99	7097.00 Number
9001121125 PCB Description PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM . Specification PCB,SIZE 82.37MM X 43MM Drg No.OLF/EPS/TVNE-4B/SMD P.C.B. SMOTP DOUBLE SIDED, PTH DRG NO. OLF/EPS/TVNE-4B/SMD, GLASS EPOXY BOARD OF THICKNESS 2 MM AND COPPER FOIL THICKNESS 50 MICROMETER AS PER SPCN.NO. OLF/MSD/PCB/01/MOD AND CONFORMING TO JSS-52301,S IZE 82.37 MM X 43 MM . Drawing no. Manufacturing Technology Testing / Inspection Facility	90	217 Number
9001120989 PCB Description PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ. Specification PCB SIZE- 61 X 43 MMSQ SMOTP DOUBLE SIDED,PTH,PCB AS PER DRG. NO. OLF/EBU/01, AND SPECN. NO. OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK- NESS 1.5 MM. AND COPPER FOIL THICKNESS 50 MICROMETER,CONFO-RMING TO JSS-52301, SIZE OF PCB-61 X 43 MMSQ. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	128 Number
9001120881 PCB Description PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301 Specification PCB OLF/RMU/COUNTER CARD/RUS PCB FOR RMU SIZE-127MM X 71MM AS PER DRG. NO.OLF/RMU/COUNTER CARD/RUS. DOUBLE SIDED PTH PCB SHOULD BE MADE ON GLASS EPOXY BOARD OF THICKNESS 1.5MM AND C OPPER FOIL THICKNESS 50MICROM. CONFIRMING TO SPECIFICATION OL F/MSD/PCB/01/MOD AND JSS-52301 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	16 Number
9001120578 PCB Description P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM Specification P.C.B.(BOARD) AF7102187 PCB SMOTP DOUBLE SIDED, PTH, PCB, AS PER DRG. NO.AF7.102.187 ON GLASS EPOXY BOARD OF THICKN ESS 1.5 MM AND COPPER FOIL THICKNESS 35 MICROMETER, AND A S PER SPECIFICATION NO. OLF/MSD/PCB/01/MOD, AND CONFOR M TO JSS-52301, PCB SIZE- 100 X 47 SQMM Drawing no. Manufacturing Technology Testing / Inspection Facility	90	534 Number
9001120513 PCB SMOTP DOUBLE SIDED PTH Description PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM Specification PCB-SMOTP DOUBLE SIDED PTH PCB-SMOTP DOUBLE SIDED PTH AS PER DRG NO : OLF/A-II/PCB/PAS/BPK2 (NEW) ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FO IL THICKNESS 35 MICROMETRE, CONFIRMING TO JSS 52301 AND AS PER SPCEN NO : OLF/MSD/PCB/01/MOD SIZE- 94.5 X 71.63 SQMM Drawing no. Manufacturing Technology Testing / Inspection Facility	90	231 Number

18256

170165FGR1

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953 Description ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953 Specification ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953 Drawing no. DRG. NO. 4730-006953 Manufacturing Technology Testing / Inspection Facility	90	1513 Number
PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724 Description PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724 Specification PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724 Drawing no. DRG. NO. 1015-000724 Manufacturing Technology Testing / Inspection Facility	90	121 Number

18257

110180208

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
WEBBING NYLON 44 MM U D 17800N Description WEBBING NYLON 44 MM U/D 17800N Specification SPECN. NO.: IS:4727-1968 except for :- i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and C/QAI/TC-8/7(b). ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. the material shall conform to the sealed pattern held in the custody of the Controller,CQAT and C,KANPUR. iii)PACKING and MARKING : As per schedule No. CIT and C/PMS/41. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101876973	122562.58 Metre

18258

OFMK/COMP/K407618

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
SOLID TYRE PART NO 765 34 41 AFTER RUBBERISATION ITS TO BE 765 34 CD 124 SOLID TYRE Description SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE. Specification SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE. Annexure_for_solid_tyre.pdf Drawing no. SOLID TYRE (PART NO 765-34-41) AFTER RUBBERISATION ITS TO BE 765-34-CD 124 SOLID TYRE. 765_34_Sb124.pdf TY_38_00411_77.pdf Manufacturing Technology Testing / Inspection Facility	80	514 Whole job

18259

OPF/ADVANCE VR/EOI/2019/RECEE BOAT ITEMS-01

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
CLOTH COTTON CANVAS OG WIDTH 91 CM MIN Description SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting Specification SPECN-NO:-IS:1424 VARIETY NO.2 EXCEPT THE FOLLOWING-(a)MASS AS PER IS:1964 - 950 TO 1200 GM/Sqm.(b) WIDTH AS PER IS:1954 -91 CMS (MIN.) (C)BREAKING STRENGTH AS PER IS:1969 (RAVELLED STRIP METHOD)-193 KGS. (MIN)WARP:-162 KGS(MIN)WEFT.(d)WATER PROOFNESS PRESSURE HEAD TEST-AS PER CLAUSE 3.3.7.1OF.IS:2089 APPENDIX-E SHOULD WITH STAND 30 CM WATER HEAD FOR ONE HOUR.(e)WATER PROOFNESS CONE TEST AS PER CLAUSE 3.3.7.2 IS:2089appendix-A. No leakages on outer wetting Drawing no. Manufacturing Technology Testing / Inspection Facility	2101726669	27325 Metre
ADHESIVE TYPE B Description ADHESIVE TYPE -B Specification IND/ENG/PROV/1193/d Drawing no. Manufacturing Technology As Per Specification/Drawing IND-ENG-PROV-1193-d.pdf Testing / Inspection Facility As Per Specification/Drawing	1003260420	455 Kilogram
NEOPRENE COATED NYLON FABRIC 650 GM 50 gm sqr mtr Width 101CM for recee boat Description NEOPRENE COATED NYLON FABRIC 650 GM 50 gm sqr mtr Width 101CM Specification Specn no. CQAE/1940/ 1613/a Drawing no. Manufacturing Technology Testing / Inspection Facility	9911022274	37831 Metre
D HOOK for BOAT RECCE Description D HOOK Specification Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3 Drawing no. Specn no.-Item no. 30 of Drawing. IMGA-0067/1 (B) Sheet -2 of 3 Manufacturing Technology Testing / Inspection Facility	9911037581	1513 Number
D Ring Upper for Folding Bailer Radius 51 mm Description D-Ring Upper for Folding Bailer (Radius- 51 mm) Specification D-Ring Upper for Folding Bailer (Radius- 51 mm) Drawing no. Manufacturing Technology Testing / Inspection Facility	9911037577	1513 Number
D Ring Lower for Folding Bailer Radius 76 mm Description D-Ring Lower for Folding Bailer (Radius-76 mm Specification Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing Drawing no. Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing Manufacturing Technology Testing / Inspection Facility	9911037578	1513 Number
Aluminum Alloy Handle for folding bailer Description Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing Specification Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing Drawing no. Item No. 01 of Drawing no.-IMPD 0417 and Shaped as per Drawing Manufacturing Technology Testing / Inspection Facility	2111602229	1513 Number
FLOOR BOARD FRP IN 3 PARTS Description FLOOR BOARD (FRP) IN 3 PARTS Specification IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006 Drawing no. IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006 Manufacturing Technology Testing / Inspection Facility	9911037589	1513 Set
LIFTING PLANK for recee boat Description LIFTING PLANK Specification IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Drawing no. IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Manufacturing Technology Testing / Inspection Facility	9911037588	1513 Number
Neoprene Rubber mould with shore hardness 60 5 for recee boat Description Neoprene Rubber mould with shore hardness 60+-5 Specification Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3 Drawing no. Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3 Manufacturing Technology Testing / Inspection Facility	9911037579	3036 Number
GRATING FOR RECEE BOAT Description GRATING Specification IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Drawing no. IMPD - 0410/A and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Manufacturing Technology Testing / Inspection Facility	9911037585	1513 Number
BOW END PLANK FOR RECEE BOAT Description BOW END PLANK Specification IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Drawing no. IMPD – 0408 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006 Manufacturing Technology Testing / Inspection Facility	9911037583	1513 Number

Proceed