SILICON DIODE IN 4007. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

SILICON DIODE IN 4007. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE,IR EMITTING,TYPE L 23 47-02 HIMAMATSU OR EQUIVALENT. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE,IR EMITTING,TYPE L 23 47-02 HIMAMATSU OR EQUIVALENT. NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE OA-5 NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

DIODE OA-5 NOTE-IT SHOULD CONFIRM TO JSS/MIL GRADE.

CONDENSER 22 MF 16

CONDENSER 22 MF 16

LIGHT EMITING DIODE COLOUR GREEN SIZE= DIAMETER 5 MM AND 7 MM LONG

LIGHT EMITING DIODE COLOUR GREEN SIZE= DIAMETER 5 MM AND 7 MM LONG

CONDENSER 4.7 MICRO FARAD, 16V

CONDENSER 4.7 MICRO FARAD, 16V

BATTERY,NON-RECHARGEABLE, 3V, TYPE- CR123/CR123A, LITHIUM, MAKE-PANASONIC/DURACELL/SONY

BATTERY,NON-RECHARGEABLE, 3V, TYPE- CR123/CR123A, LITHIUM, MAKE-PANASONIC/DURACELL/SONY

RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER.

RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER.

BATTERY LITHIUM CELL 3.6 VOLT,SIZE:AA AS PER SPECIFICATION NO.OLF/A-1/SPEC

BATTERY LITHIUM CELL 3.6 VOLT,SIZE:AA AS PER SPECIFICATION NO.OLF/A-1/SPEC

LITHIUM CELL 3.5V SIZE-AA LS-6 SAFT OR EQUIVALENT NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

LITHIUM CELL 3.5V SIZE-AA LS-6 SAFT OR EQUIVALENT NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

PENCIL CELL 1.5 V,SIZE-AA,LEAK PROOF EVEREADY NO.1015/NIPPO/NOVINO. NOTE:- 1. IT SHOULD CONFIRM TO IS:9128 GRADE.

PENCIL CELL 1.5 V,SIZE-AA,LEAK PROOF EVEREADY NO.1015/NIPPO/NOVINO. NOTE:- 1. IT SHOULD CONFIRM TO IS:9128 GRADE.

BATTERY CHARGER FOR RECHARGEABLE BATTERY, RCR123/RCR123A/16340 AS PER ANNEXURE-A

BATTERY CHARGER FOR RECHARGEABLE BATTERY, RCR123/RCR123A/16340 AS PER ANNEXURE-A

TAFLON ROD 1-1/2 "DIAX2FT LONG

TAFLON ROD 1-1/2 "DIAX2FT LONG

EBONITE ROD 7/8"(22.23 MM) TYPE-I OF IS:6693-1972

EBONITE ROD 7/8"(22.23 MM) TYPE-I OF IS:6693-1972

EBONITE ROD 1-1/2" CONFIRMING TO IS -6693

EBONITE ROD 1-1/2" CONFIRMING TO IS -6693

EBONITE ROD 1-3/8"DIA

EBONITE ROD 1-3/8"DIA

EBONITE ROD 7/8"DIA BS-234/1957 TYPE 1 OR 2.

EBONITE ROD 7/8"DIA BS-234/1957 TYPE 1 OR 2.

EBONITE ROD POED -M-101 GRADE A.B.3/4"OR 19.05 MM DIA.

EBONITE ROD POED -M-101 GRADE A.B.3/4"OR 19.05 MM DIA.

EBONITE ROD 5/8"(15.875 MM)DIA. TYPE-I OF IS:6693-1972

EBONITE ROD 5/8"(15.875 MM)DIA. TYPE-I OF IS:6693-1972

IS:2771

IS:2771

Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm CQA(GS)/US/460

CQA(GS)/US/460

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

INVESTMENT CASTING FOR BOARD LF NO 9927099227

INVESTMENT CASTING FOR BOARD LF NO 9927099227

T-02/IC/8070001/246 M1

INVESTMENT CASTING MANDREL LF NO 9927092205

INVESTMENT CASTING MANDREL LF NO 9927092205

T-02/IC/9317009/050 M1

BRACKET CASTING LF NO 7520203400

BRACKET CASTING LF NO 7520203400

T-02/IC/8080029/034M1

BODY CASTING SC/52/651 (LF 7515230400)

BODY CASTING SC/52/651 (LF 7515230400)

BODY CASTING LF NO 7515128900

BODY CASTING LF NO 7515128900

SC/510203/508

SHAFT CASTING LF NO 7512408500

SHAFT CASTING LF NO 7512408500

B-24/IC/8319058/85M1

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

• As per tender document Annexure L

• As per tender document Annexure L

WASHER NOZZLE AS PER DRG. NO.ARDE-1135 DET-19.

WASHER NOZZLE AS PER DRG. NO.ARDE-1135 DET-19.

TOP WASHER AS PER DRG.NO. FS - 513 'F' (OFBA/RK/391).

TOP WASHER AS PER DRG.NO. FS - 513 'F' (OFBA/RK/391).

TAPE ASBESTOS AS PER DRG. NO. OFBA/RK/393. (ARDE-1135 DET-15)

TAPE ASBESTOS AS PER DRG. NO. OFBA/RK/393. (ARDE-1135 DET-15)

SPRING PROPELLANT AS PER DRG.NO. ARDE-1135 DET-4.

SPRING PROPELLANT AS PER DRG.NO. ARDE-1135 DET-4.

125 MM HEAT SHELL FILL W/O NOSE

125 MM HEAT SHELL FILL W/O NOSE

SEALING WASHER AS PER DRG.NO. FS - 514 'G' (OFBA/RK/392).

SEALING WASHER AS PER DRG.NO. FS - 514 'G' (OFBA/RK/392).

SEALING PLUG AS PER DRG.NO. ARDE-1135 DET-2.

SEALING PLUG AS PER DRG.NO. ARDE-1135 DET-2.

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

• MSME

• REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG.NO. OFBA/CX/54 DT.8.4.93 ALTERNATE METHOD. PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN.IS:303-1989(THIRD REV.) REAFFIRMED- 2018 STEEL FOR RIB SPECN.IS1079-1994FIFTH REV.OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719(d).DC3754-ME DT. 12.12.02

PRESSURE TRANSDUCER RANGE 2000 PSI AS PER ATTACHED SPECIFICATION.

PRESSURE TRANSDUCER RANGE 2000 PSI AS PER ATTACHED SPECIFICATION.

COMPRESSION CANISTER LOAD CELL RANGE 1 TON (10 KN) AS PER ATTACHED SPECIFICATION.

COMPRESSION CANISTER LOAD CELL RANGE 1 TON (10 KN) AS PER ATTACHED SPECIFICATION.

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2" DIA PO1-D-10GD

EBONITE ROD 1/2" DIA PO1-D-10GD

EBONITE ROD 3/8"DIA [9.5M.M.]. HIEGHLY POLISHED] IS-234/1957.

EBONITE ROD 3/8"DIA [9.5M.M.]. HIEGHLY POLISHED] IS-234/1957.

EBONITE ROD 10 MM DIA. POED M 101 GRADE- A & B.

EBONITE ROD 10 MM DIA. POED M 101 GRADE- A & B.

DRG. NO. DD(L) 13461-A/1

DRG. NO. DD(L) 13461-A/1

CIA-3807(b) [Drg No DD(L) 13461-A/1]

CIA-3807(b) [Drg No DD(L) 13461-A/1]

CIA 3807 (b) [ DRG NO. DD(L) 13461-A/1]

CIA 3807 (b) [ DRG NO. DD(L) 13461-A/1]

CQA(A) 3807(d) DRG. NO. DD(L) 13461-A/1

CQA(A) 3807(d) DRG. NO. DD(L) 13461-A/1

CIA 3807(b) DRG. NO. DD(L) 13461A/1

CIA 3807(b) DRG. NO. DD(L) 13461A/1

CIA 3807(b) [DRG. NO. DD(L) 13461-A/1, SHEET 2]

CIA 3807(b) [DRG. NO. DD(L) 13461-A/1, SHEET 2]

DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d)

DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d)

DRG. NO. CQA/AMN/3259 PART NO. ISV 583A

DRG. NO. CQA/AMN/3259 PART NO. ISV 583A

EBONITE ROD 1"DIA IS-6693.

EBONITE ROD 1"DIA IS-6693.

PERSPEX ROD 12 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

PERSPEX ROD 12 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

PERSPEX ROD 10 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS

PERSPEX ROD 10 MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS

L.E.D.[LIGHT EMITTING DIODE] RED COLOUR DIA-3 MM X 3 MM LONG NOTE:SAMPLE APPROVAL REQUIRED BEFORE BULK SUPPLY

L.E.D.[LIGHT EMITTING DIODE] RED COLOUR DIA-3 MM X 3 MM LONG NOTE:SAMPLE APPROVAL REQUIRED BEFORE BULK SUPPLY

L E D [LIGHT EMMITING DIODE] RED COLOUR COMPLETE WITH COVER DIA-5MM X 7MM LONG NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

L E D [LIGHT EMMITING DIODE] RED COLOUR COMPLETE WITH COVER DIA-5MM X 7MM LONG NOTE:IT SHOULD CONFORM TO JSS/MIL GRADE.

LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY.

WHITE SLEEVE III TV-40-230-2X0.4 AS PER SPECN.GOST(RUSSIAN) 19034-73 FOR TNPO 160 AND 168 B.

WHITE SLEEVE III TV-40-230-2X0.4 AS PER SPECN.GOST(RUSSIAN) 19034-73 FOR TNPO 160 AND 168 B.

WHITE SLEEVE 3.31 TB-40,2 GOST 19034-82

WHITE SLEEVE 3.31 TB-40,2 GOST 19034-82

PVC ADHESIVE INSULATION TAPE GREEN COLOUR,SIZE=12 MM WIDE,8 METERS/10 METERS LONG OR IN STD.LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/JOHNSON/PERMACIL

PVC ADHESIVE INSULATION TAPE GREEN COLOUR,SIZE=12 MM WIDE,8 METERS/10 METERS LONG OR IN STD.LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/JOHNSON/PERMACIL

PVC ADHESIVE INSULATION TAPE RED COLOUR SIZE=12 MM WIDE, 8 METERS/10 METERS LONG OR IN STD. LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/PERMACIL/JOHNSON

PVC ADHESIVE INSULATION TAPE RED COLOUR SIZE=12 MM WIDE, 8 METERS/10 METERS LONG OR IN STD. LENGTH IN ROLL CONFORMING TO IS:7809 MAKE-KINJAL/PERMACIL/JOHNSON

DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)

DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)

DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)

DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)

DRG.NO. ARDE 2064 (DET NO 7) PT NO ITV 225 SPECN. CQA(A) 2328 (d)

DRG.NO. ARDE 2064 (DET NO 7) PT NO ITV 225 SPECN. CQA(A) 2328 (d)

DRG NO ARDE 2064 (DET 6) PT NO ITV 224 SPECN. CQA(A) 2328 (d)

DRG NO ARDE 2064 (DET 6) PT NO ITV 224 SPECN. CQA(A) 2328 (d)

DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d)

DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d)

CQA(A) 2328

CQA(A) 2328

STEEL RECTANGULAR BLOCK TO SIZE 165MM

SPECN. BS:3S144 1995 (1999)GD.S144D MATL PROCESSED THROUGH LFVD(WITH CAL.SILICATE TREATMENT)SULP SULPHAR 0 015 MAX & PHOSPHOROUS 0.03 MAX.INCLU.RATING AS PER SPECN. IS:4163-1982

SLEEVE PVC BLACK 10 MM BORE

SLEEVE PVC BLACK 10 MM BORE

EBONITE SHEET 1/4" THICK (6.35

EBONITE SHEET 1/4" THICK (6.35

HYLEM SHEET 3.5MM THICK

HYLEM SHEET 3.5MM THICK

HYLAM ROD 1/4"DIA.

HYLAM ROD 1/4"DIA.

HYLEM SHEET 1.00 MM THICK FABRIC BASE. SPECE:F-105.

HYLEM SHEET 1.00 MM THICK FABRIC BASE. SPECE:F-105.

SPECN. NO. CQA(A) 2328(d) DRG. NO. ARDE 2064 (DET NO. 23) PT NO. ITV 221

SPECN. NO. CQA(A) 2328(d) DRG. NO. ARDE 2064 (DET NO. 23) PT NO. ITV 221

SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220

SPECN.CQA(A) 2328 (d) DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220

IS:3459-2004 (2nd REV) REAFFIRMED 2010 WITH MINIMUM BREAKING LOAD OF 265 KGS.

IS:3459-2004 (2nd REV) REAFFIRMED 2010 WITH MINIMUM BREAKING LOAD OF 265 KGS.

DRG. NO. ARDE-2125 DET NO. 1 PT. NO. ISV 532 A

DRG. NO. ARDE-2125 DET NO. 1 PT. NO. ISV 532 A

DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

IS 2898 : 1976

IS 2898 : 1976