CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

TOP WASHER TO OFAJ DRG. NO. FS-513F.

DRG. NO. FS-513F.

DRG. NO. FS-513F.

WASHER NOZZLE TO OFAJ DRG NO FS 518B

WASHER NOZZLE TO OFAJ DRG NO FS 518B

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

HEAT TREATMENT OF ROLL PIN TO OFAJ DRG.NO.FS-3022 IN TO ROLLPIN TO OFAJ DRG.NO.FS-516A WITHOUT SURFACE TREATMENT ON CONVERSION BASIS

BRIGHT FINISHED STEEL BAR TO SPECN BS970 PART-1-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00-0.08MM DIA

BRIGHT FINISHED STEEL BAR TO SPECN BS970 PART-1-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00-0.08MM DIA

HOT ROLLED COLD DRAWN CARBON STEEL ROUND TO SPECN BS:970-PT-I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 3 METRES(10 %MAX.SHORT DOWN TO 2-3 METRES PERMITTED) SIZE:17.00-0.08MM DIA

HOT ROLLED COLD DRAWN CARBON STEEL ROUND TO SPECN BS:970-PT-I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 3 METRES(10 %MAX.SHORT DOWN TO 2-3 METRES PERMITTED) SIZE:17.00-0.08MM DIA

0

COLD DRAWN CARBON STEEL ROUND BAR TO SPECN.IS:4431 78 DESIGN 14C14S14 (C/D) IN STRAIGHT LENGTH OF 2.5 METRES MIN. SIZE 15.00 + 0.025/-0.075 MM DIA.

COLD DRAWN CARBON STEEL ROUND BAR TO SPECN.IS:4431 78 DESIGN 14C14S14 (C/D) IN STRAIGHT LENGTH OF 2.5 METRES MIN. SIZE 15.00 + 0.025/-0.075 MM DIA.

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

STEEL BAR TO SPECN.NO.IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 22 -0.052 MM DIA

STEEL BAR TO SPECN.NO.IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE 22 -0.052 MM DIA

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

• PQ ATTACHED

• PQ ATTACHED

ROLL PIN TO OFAJ DRG. NO.FS-516 A

ROLL PIN TO OFAJ DRG. NO.FS-516 A

• ATTACHED

• ATTACHED

'O' RING TO OFAJ DRG. NO.FS-519 D

'O' RING TO OFAJ DRG. NO.FS-519 D

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH (ITEM CODE: 0611525036)

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN.BS970 (PART-I)1983GRADE 410S21 (EN56A)WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

SILVER PLATING OF CONNECTING PINS OF 68 MM ARROW ROCKET TOSPECIFICATION DTD 919 B AS DETAILED IN DRG.NO. ARDE 1135.

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA

LEADED BRASS ROUND TO SPECN.BS:2874 (LATEST ISSUE) GR.CZ-121PB 3 IN "M" CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 MTRS. SIZE: 3.658 -0.05 MM DIA

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

BRASS ROUNDS TO SPECN.BS:2874-1986 GRADE CZ-121 PB3 IN "M"CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE:- 3.00 +/- 0.04 MM DIA.

OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET

OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET

Fabrication of Bag Kit Universal (Mark-II)

SPCN.-S/2532/Bag Kit Universal OG/TC-6(a)

PARTED STEEL BILLET FOR 155MM ADAPTOR AS PER OFAJ DRG.NO.F 640

as per Drawing

F-640

• 1) Blast Furnace & LD Converter (Basic Oxygen Furnace) OR Electric Arc Furnace OR Induction furnace having 2) Ladle refining furnace along with Argon purging system 3) Vacuum degassing furnace along with argon purging system 4) Continuous casting machine / bottom pouring casting facility. Continuous casting is permitted where applicable 5) Soaking pit / Pre heating furnace 6) Rolling Mill to maintain reduction ratio of 6:1 7) Annealing / Normalizing Furnace

• 1) Optical emission Spectrometer 2) Carbon, Sulphur Analyzer 3) Temperature measuring facilities during melting/Casting 4) Mechanical testing facilities as applicable 5) Metallography facilities for Micro and Macro Analysis 6) Ultrasonic Testing Facilities with qualified personnel

COPPER BAND PROTECTOR FOR 155MM ERFB SHELL TO OFAJ DRG.NO.SM-1241 A

AS PER DRAWING

SM 1241 A

STEEL BAR FOR 155MM IMI SHELL FORGING AS PER OFAJ DRG.NO.F-638

AS PER DRAWING

F 638

Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle

Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle

Drg No. 0204-03-03-01-14-000-00DB

• Machining & assy.

• As per attached document

Spring Recoil to Drg. No 0204-03-02-00-06-004-00DA in finished condition

Spring Recoil to Drg. No 0204-03-02-00-06-004-00DA in finished condition

0204-03-02-00-06-004-00DA

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

0204 03 02 00 01 005 00DD

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Sear Safety Drg No. 0204 03 02 02 18 008 00DD FOR JVPC5.56MM (MIM Route)

Sear Safety Drg No. 0204 03 02 02 18 008 00DD FOR JVPC5.56MM (MIM Route)

0204 03 02 02 18 008 00DD

FIXED BUTT ASSY AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL

AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL

K 3000 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

Fabrication of Protective Pant Grey

FABRICATION OF PROTECTIVE PANT GREY. SWO PART II No. 20240/70240. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED..

FABRICATION OF PROTECTIVE SHIRT GREY HALF SLEEVE.

FABRICATION OF PROTECTIVE SHIRT GREY HALF SLEEVE. SWO PART II No. 20239/70239. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

PAINT READY MIXED, AIR DRYING, MATT/SEMI GLOSSY TYPE, SPRAYING, TURQUOISE BLUE TO SPECN: IS 168-1993 AND COLOUR CODE NO.102 TO SPECN: IS.5-2004

PAINT READY MIXED, AIR DRYING, MATT/SEMI GLOSSY TYPE, SPRAYING, TURQUOISE BLUE TO SPECN: IS 168-1993 AND COLOUR CODE NO.102 TO SPECN: IS.5-2004

PAINT READY MIXED AIR DRYING.SEMI GLOSSY TYPE,SPRAYING TURQOISE BLUE TO SPECN:IS 168-1993 AND COLOUR CODE NO.102 TO SPECN;IS.5-1978.

PAINT READY MIXED AIR DRYING.SEMI GLOSSY TYPE,SPRAYING TURQOISE BLUE TO SPECN:IS 168-1993 AND COLOUR CODE NO.102 TO SPECN;IS.5-1978.

PACKING CARTON FOR 84 MM TPT TO OFAJ DRG.NO. FS-2367 E.

PACKING CARTON FOR 84 MM TPT TO OFAJ DRG.NO. FS-2367 E.

REUSABLE PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE

REUSABLE PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE

PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE

PLASTIC CONTAINER TO DRG.NO.FS-2368C FOR 84MM TPT PROJECTILE

CONVERSION OF ALUMINIUM ALLOY ROD 33.5 MM DIA GR.24345 IN 'WP' CONDITION BY PEELING TO AL.ALLOY ROD 30 MM DIA +/-0.05 MM GR.24345 IN 'WP' CONDITION FOR MFG OF TPT NOSE. WITH STRAIGHTNESS LESS THAN OR EQUAL TO0.3MM PER METER LENGTH.

CONVERSION OF ALUMINIUM ALLOY ROD 33.5 MM DIA GR.24345 IN 'WP' CONDITION BY PEELING TO AL.ALLOY ROD 30 MM DIA +/-0.05 MM GR.24345 IN 'WP' CONDITION FOR MFG OF TPT NOSE. WITH STRAIGHTNESS LESS THAN OR EQUAL TO0.3MM PER METER LENGTH.

TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96

TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96

CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.

CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.

TPT DISTANCE PIECE TO OFAJ DRG.NO.CG-83K FOR TPT DISTANCE TUBE.

TPT DISTANCE PIECE TO OFAJ DRG.NO.CG-83K FOR TPT DISTANCE TUBE.

CORRUGATED FIBRE BOARD PACKINGCARTON TO OFAJ DRG NO. CC-536B

CORRUGATED FIBRE BOARD PACKINGCARTON TO OFAJ DRG NO. CC-536B

CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C.

CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )

CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )

CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO.

CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO.

CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.

CONVERSION OF TUBE AL.ALLOY TUBE 67.00 +/- 0.50 MM ID.& 9.2 + 0.9 - 0.00 mm TH.(0613059670) TO TUBE FOR BLANKS TO OFAJ DRG.NO.FS-2914 FOR STABILIZING TUBE.

Fabrication of Overall Combination Drill Khaki with Pivot Sleeves

FABRICATION OF OVERALL COMBINATION DRILL KHAKI WITH PIVOT SLEEVES. SWO PART II No. 20198/70198. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

AL ALLOY TUBE TO OFAJ DRAWING NO.SK-1409 FOR STABILIZING TUBE

AL ALLOY TUBE TO OFAJ DRAWING NO.SK-1409 FOR STABILIZING TUBE

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 68 MM FOR STABILIZING TUBE, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002

EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.

EXTRUDED AND DRAWN AL.ALLOY TUBE TO SPECN.BS:1474-1987 GR. 6082 IN F COND.TO SIZE ID 67.00 MM +/-0.50 MM & O/D 91MM +/- 0.9MM WITH 3MM PGG ON RADIUS HAVING STRAIGHT LENGTH OF 1to3 MTR.ONLY ON THE TEST PIECE SHOULD BE HEAT TREATED TO T6 COND & TESTED TO SATISFY THE CORESPONDING MECHANICAL PROPERTIES.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.

FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" OR BS-1474 1987 GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA.AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS.

CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 21MM DIA +/-0.25 (ITEM CODE :0611505021) BY GRINDING TO AL. ALLOY ROUND BAR 20MM DIA +/-0.05MM WITH STRAIGHTNESS +/-0.2MM PER MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

CONVERSION OF AL.ALLOY ROUND BAR 28 MM DIA TO SPECN.IS:733 - 1983 GR.24345 IN "WP" WITH 8% MIN ELONGATION BY PEELING & GRINDING TO AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

AL.ALLOY ROUND BAR 20 MM DIA -0.05 MM WITH STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR LENGTH

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 GR.24345 IN "WP" 8% MIN ELONGATION HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 20 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

TRACER BODY TO DRG NO.F-1334-154780-D DC-36534-A DTD.6/3/99 FOR 84 MM CARL GUSTAF.

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

DEOXIDISED COPPER TUBE TO SPECN.JSS:4710-1(LATEST ISSUE) IN AS EXTRUDED AND DRAWN CONDITION, SIZE:- 83.7 + 0.5/- 0.0 MM I/D X 4.5 + 1.5/- 0.0 MM W/T X 300 MM LONG.

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

AL.ALLOY TUBE TO OFAJ DRAWING NO.SK-1410 FOR ILLU SHELL BODY

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

ALUMINIUM ALLOY EXTD TUBE OD 88 X ID 60 MM FOR ILLU SHELL BODY, MATERIAL SPECIFICATION IS:1285-2002 GRADE 64430 IN "F" CONDITION, DIMENSION & TOLERANCE AS PER 2673-2002.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION BS 970:PT-1:1983 GRADE 303S31 SIZE:- 8 MM -0.07 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4305-AT SIZE: 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS EN 10088-3-1. 4523+QT SIZE:- 11 MM+/-0.05 MM DIA IN STRAIGHT LENGTH OF 2 TO 3 METRES.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO OFAJ SPECN. CC-388, SIZE: 10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG.

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

O RING 74.3 X 3 TO OFAJ DRAWING NO.FS-3036A

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

BLIND RIVET TO OFAJ DRAWING NO.FS-3035

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

O RING 7.1 X 1.6 TO OFAJ DRAWING NO.FS-3034A

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG.NO FS-3025 INTO FUZE HOLDER ASSY.TO OFAJ DRAWING NO FS-3027 BY VULCANIZATION

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

O RING 21 X 2 TO OFAJ DRAWING NO.FS-3033A

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

SLIDE SHOE TO OFAJ DRAWING NO FS-3024

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK

COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK