YOKE WELDING (L-70/168/RF2A-6) TO DRG. NO. 4023918

AS PER DRG.

DRG. NO. 4023918

BRASS TUBE 35MM (O/D) X 22 MM (I/D) TO-IS 407 CUZN 37 TA

BRASS TUBE 35MM (O/D) X 22 MM (I/D) TO-IS 407 CUZN 37 TA

ALLUMINIUM SHEET 2.00MM THICK AS PER IS: 737-2008, DESIGNATION-19000, CONDITION-HX4. NOTE: THE SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & BOTH SIDE LAMINATED WITH INTER LEAF PACKING TO AVOID CORROSION.

ALLUMINIUM SHEET 2.00MM THICK AS PER IS: 737-2008, DESIGNATION-19000, CONDITION-HX4. NOTE: THE SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & BOTH SIDE LAMINATED WITH INTER LEAF PACKING TO AVOID CORROSION.

ALLUM ALLOY SHEET 6 MM TH.X 1220 X 2440. MM OR 1/4''X 4' X 8'TO SPECN.IS-737/1986 OF DESIGN.24345 IN WP CONDITION WITH INTER-LEAF PACKING TO AVOID SCRATCH ES IN TRANSITION

ALLUM ALLOY SHEET 6 MM TH.X 1220 X 2440. MM OR 1/4''X 4' X 8'TO SPECN.IS-737/1986 OF DESIGN.24345 IN WP CONDITION WITH INTER-LEAF PACKING TO AVOID SCRATCH ES IN TRANSITION

BRASS ROD 22MM(7/8") DIA. GDE1, HB(HALF HARD) TO IS:319-2007

BRASS ROD 22MM(7/8") DIA. GDE1, HB(HALF HARD) TO IS:319-2007

BRASS ROD 8.00 MM DIA TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 8.00 MM DIA TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

ALUMINIUM ALLOY ROD 22.00MM (7/8")DIA TO SPECIFICATION IS-733/1983-24345 (TOLERANCE +0.25MM)

ALUMINIUM ALLOY ROD 22.00MM (7/8")DIA TO SPECIFICATION IS-733/1983-24345 (TOLERANCE +0.25MM)

ALL.ALLOY ROD 1-3/8"DIA IS: 733-1983 64430-WP

ALL.ALLOY ROD 1-3/8"DIA IS: 733-1983 64430-WP

ALU.ALLOY INGOT IS-617/1975 A-11 WP

ALU.ALLOY INGOT IS-617/1975 A-11 WP

CARBON STEEL FLAT 10 MM THICK X 40 MM WIDE AS PER IS:5517 -1993, 40C8

CARBON STEEL FLAT 10 MM THICK X 40 MM WIDE AS PER IS:5517 -1993, 40C8

CARBON STEEL ROD 8.00 MM DIA SPEC. IS:5517-1993, DESIGNATION- 40C8

CARBON STEEL ROD 8.00 MM DIA SPEC. IS:5517-1993, DESIGNATION- 40C8

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

M. S. ROD 8 MM(5/16)DIA.BS-970/EN-3B.

M. S. ROD 8 MM(5/16)DIA.BS-970/EN-3B.

ALUMINIUM SHEET OF 1.6 MM THICK TO IS-737-1974/ SIC-H (SIZE 8'X 4' IS PREFERED). NOTE-SHEET SHOULD BE PERFECTLY FLAT & FREE FROM SCRATCH.WITH INTERLEAF PACKING TO AVOIDE SCRATCHES IN TRANSIT.

ALUMINIUM SHEET OF 1.6 MM THICK TO IS-737-1974/ SIC-H (SIZE 8'X 4' IS PREFERED). NOTE-SHEET SHOULD BE PERFECTLY FLAT & FREE FROM SCRATCH.WITH INTERLEAF PACKING TO AVOIDE SCRATCHES IN TRANSIT.

ALLUMINIUM ALLOY SHEET 8.00 MM THICK TO SPECN. IS-737/SIC HALF HARD. 24345 WP

ALLUMINIUM ALLOY SHEET 8.00 MM THICK TO SPECN. IS-737/SIC HALF HARD. 24345 WP

M.S.SHEET 1250X2500 X 2.00 MM THICK. FE410 IS:1079-1988 IS:1079-1988

M.S.SHEET 1250X2500 X 2.00 MM THICK. FE410 IS:1079-1988 IS:1079-1988

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

ALLUMINIUM ALLOY ROD 1/2"OR 12.7 MM DIA TO SPECIFICATION IS-733HE-15

ALLUMINIUM ALLOY ROD 1/2"OR 12.7 MM DIA TO SPECIFICATION IS-733HE-15

NAILS WIRE 2"X12G IS-730

NAILS WIRE 2"X12G IS-730

ALUMINIUM SHEET 1.5MM THICK GD-53000 HE-30 OF IS:737

ALUMINIUM SHEET 1.5MM THICK GD-53000 HE-30 OF IS:737

CR.NI.ST. ROD 8.00 MM DIA AS PER IS-6603 04 CR 18 NI 10

CR.NI.ST. ROD 8.00 MM DIA AS PER IS-6603 04 CR 18 NI 10

ALLUMINIUM SHEET 0.56MM TO SPECN IS-737/1986-19000. X 1250MM (4FT WIDE)

ALLUMINIUM SHEET 0.56MM TO SPECN IS-737/1986-19000. X 1250MM (4FT WIDE)

ALLUMINIUM ALLOY ROD 20 MM DIA TO SPECN. IS-733/1983 OF DESIGN.24345 IN WP CONDITION

ALLUMINIUM ALLOY ROD 20 MM DIA TO SPECN. IS-733/1983 OF DESIGN.24345 IN WP CONDITION

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1"DIA IS-6693.

EBONITE ROD 1"DIA IS-6693.

LEADED BRASS INGOTS IS: 292-1983 L C B2 (IRON CONTENT 0.05%M

LEADED BRASS INGOTS IS: 292-1983 L C B2 (IRON CONTENT 0.05%M

NON MAGNETIC GUN METAL INGOT TO SPCN. IS-306,FE CONTENT SHOULD NOT BE MORE THAN 0.01%. IS-306 IS-306-1983

NON MAGNETIC GUN METAL INGOT TO SPCN. IS-306,FE CONTENT SHOULD NOT BE MORE THAN 0.01%. IS-306 IS-306-1983

H.T.BRASS ROD 9.50 MM DIA.IS-320 GD-HT-2

H.T.BRASS ROD 9.50 MM DIA.IS-320 GD-HT-2

P.BRONZE ROD 35 MM DIA. IS:7811-1985

P.BRONZE ROD 35 MM DIA. IS:7811-1985

H.T. BRASS ROD 41 MM DIA TO SPECIFICATION IS:320-1980, GRADE- HT 2, CONDITION-M.

H.T. BRASS ROD 41 MM DIA TO SPECIFICATION IS:320-1980, GRADE- HT 2, CONDITION-M.

MANGANESE BRONZE INGOTS TO SPECIFICATION BS/STA-7/CM-5 OR HTB-1 IS:304/1981

MANGANESE BRONZE INGOTS TO SPECIFICATION BS/STA-7/CM-5 OR HTB-1 IS:304/1981

LEADED TIN BRONZ INGOTS IS: 318-1981 L T B 3

LEADED TIN BRONZ INGOTS IS: 318-1981 L T B 3

GUN METAL ROD 22.22 MM DIA. G1 GP-3 OF BS:1400-1973 OR GUN METAL CONDITION M OF IS:8362-1973

GUN METAL ROD 22.22 MM DIA. G1 GP-3 OF BS:1400-1973 OR GUN METAL CONDITION M OF IS:8362-1973

N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%

N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%

BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

G.M.BAR 1/2"SQR.BS-1400/G1-C

G.M.BAR 1/2"SQR.BS-1400/G1-C

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB

NON-MAGNETIC BRASS ROD 16MM DIA IS-319/1989, GDE-1 , HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

NON-MAGNETIC BRASS ROD 16MM DIA IS-319/1989, GDE-1 , HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

N.M.P.B.ROD 3/8"DIA. IS:7811-1985 PHOSPHER BRONZE NON MAGNETC

N.M.P.B.ROD 3/8"DIA. IS:7811-1985 PHOSPHER BRONZE NON MAGNETC

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

P.B. ROD 57 MM DIA TO SPECIFICATION IS-1385-1968, PCUSN4

P.B. ROD 57 MM DIA TO SPECIFICATION IS-1385-1968, PCUSN4

PHOSPHOR BRONZE ROD 44 MM DIA SPECN.IS-7811-1985

PHOSPHOR BRONZE ROD 44 MM DIA SPECN.IS-7811-1985

NAVAL BRASS ROD 31 MM DIA IS: 291-1989 GD-IHB (FE CONTENT NOT MORE HAN 0.05%)

NAVAL BRASS ROD 31 MM DIA IS: 291-1989 GD-IHB (FE CONTENT NOT MORE HAN 0.05%)

PHOS.BRON.ROD 29 MM DIA-IS-7811/1985

PHOS.BRON.ROD 29 MM DIA-IS-7811/1985

PHOSPHOR BRONZE ROD 25.MM.DIA. IS-7811- 1985

PHOSPHOR BRONZE ROD 25.MM.DIA. IS-7811- 1985

PHOSPHOR BRONZE ROD 22 MM DIA IS - 7811-1985

PHOSPHOR BRONZE ROD 22 MM DIA IS - 7811-1985

PHOSPHOR BRONZE ROD 16 MM DIA IS-7811-1985

PHOSPHOR BRONZE ROD 16 MM DIA IS-7811-1985

NON MAGNETIC PHOS.BRONZE ROD 13 MM DIA (DRAWN CONDITION) IS:7811-1985

NON MAGNETIC PHOS.BRONZE ROD 13 MM DIA (DRAWN CONDITION) IS:7811-1985

TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983

TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983

PHOSPHOR BRONZE STRIP 1.25 MM THICK X 25.40 MM WIDE SPECIFICATION IS:1385/PCUSN4, CONDITION-H.

PHOSPHOR BRONZE STRIP 1.25 MM THICK X 25.40 MM WIDE SPECIFICATION IS:1385/PCUSN4, CONDITION-H.

NON-MAG.TIN.BRONZE FLAT 22.23 X 42 MM WIDE AS PER IS:306-1983

NON-MAG.TIN.BRONZE FLAT 22.23 X 42 MM WIDE AS PER IS:306-1983

NON.MAG.PHOS.BRONZE WIRE 0.71MM IS:7608-1987GDE-1HD(FE CONT.RESTRICTD 0. 01% NOTE: MAGNTIC PROPERTY WILL BE CHCKED BY MAGNTIC NEEDLE AT THE DISTANCE 1.00MM FR OM SUBJECT ITEM

NON.MAG.PHOS.BRONZE WIRE 0.71MM IS:7608-1987GDE-1HD(FE CONT.RESTRICTD 0. 01% NOTE: MAGNTIC PROPERTY WILL BE CHCKED BY MAGNTIC NEEDLE AT THE DISTANCE 1.00MM FR OM SUBJECT ITEM

PHOSPHER BRONZE ROD 44 MM DIA. GRADE 1/2 HP CU SN OF IS:1385-1968

PHOSPHER BRONZE ROD 44 MM DIA. GRADE 1/2 HP CU SN OF IS:1385-1968

HIGH TENSILE BRASS ROD 57.10 MM (2-1/4") DIA. TO SPECN. IS-320 GR. HT2. CONDITION `M' 1980

HIGH TENSILE BRASS ROD 57.10 MM (2-1/4") DIA. TO SPECN. IS-320 GR. HT2. CONDITION `M' 1980

BRASS FLAT 7/16" (11.11 MM) THICK X 1-1/8" (28.57 MM) WIDE GDE. I-COND. HB OF IS-319/1989.

BRASS FLAT 7/16" (11.11 MM) THICK X 1-1/8" (28.57 MM) WIDE GDE. I-COND. HB OF IS-319/1989.

BRASS ROD 44 MM DIA IS-319/1989 GDE-1/HB

BRASS ROD 44 MM DIA IS-319/1989 GDE-1/HB

N.M.BRASS ROD 28.00 MM IS-319/GDE-1HB(F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)HB

N.M.BRASS ROD 28.00 MM IS-319/GDE-1HB(F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)HB

BRASS ROD 22MM DIA (7/8") GDE 1, HB OF IS: 319-1989

BRASS ROD 22MM DIA (7/8") GDE 1, HB OF IS: 319-1989

NAVAL BRASS ROD 1-1/8" DIA. IS: 291-1989 (FE CONTENT NOT MORE THAN 0.05%) GD-I,HB

NAVAL BRASS ROD 1-1/8" DIA. IS: 291-1989 (FE CONTENT NOT MORE THAN 0.05%) GD-I,HB

Bending of Trail tube pt no. iwp -1947

PT NO IWP-1947

SEAMLESS BRASS TUBE 38MM O/S DIA 0.813 (21 SWG) WALLTHICKNESS SPECN. IS-407/1981 CUZN 37/HD

SEAMLESS BRASS TUBE 38MM O/S DIA 0.813 (21 SWG) WALLTHICKNESS SPECN. IS-407/1981 CUZN 37/HD

BRASS TUBE 70MM O/S DIA X 32MM I/D AS PER IS:407-1981, GRADE- CUZN37, CONDITION-HARD(HD).

BRASS TUBE 70MM O/S DIA X 32MM I/D AS PER IS:407-1981, GRADE- CUZN37, CONDITION-HARD(HD).

BRASS TUBE 45 MM O/S DIA X 34.90 MM BORE TO SPECN. IS-407/1981 GRADE-CUZN30AS, CONDITION TA.

BRASS TUBE 45 MM O/S DIA X 34.90 MM BORE TO SPECN. IS-407/1981 GRADE-CUZN30AS, CONDITION TA.

LAP STRAP ADJUSTABLE BUCKLE (For Pilot Para Mirage/Sea Harrier & Jaguar A/C)

DRG. NOo. ADRDE/1456(a) Except that :- Material for Spring : Steel Wire for Mechanic Grade-SL as per IS:4454 (Part-1) : 2001, sheet No.12 of 17.

• As per Specification/Drawing

• As per Specification/Drawing

MOUNTING RAIL for JVPC 5.56 MM DRG. NO. 0204-03-02-15-28-001-00DF

MOUNTING RAIL

DRG. NO. 0204-03-02-15-28-001-00DF

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Steel flat 36mm x 62mm for JVPC BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

FORGED LOWER RACE RING TO DRG.NO:675-57-277

FORGED LOWER RACE RING TO DRG.NO:675-57-277

675-57-277

765-33-128 / 129

765-33-128 / 129

ANGLE PIECE SHEET TO DRG. 765-50-2522-01

ANGLE PIECE SHEET TO DRG. 765-50-2522-01

ALUMINIUM FORGING "BODY" TO DRG NO: ADY3-008

AS PER DRAWING NO. ADY3-008

ADY3-008

CONVERSION OF BILLETS INTO HEAD FORGINGS TO DRG NO. 675-58-223. MATERIAL PROVIDED ALUMINUM BILLETS SIZE DIA 160 X 395 - 218 NO'S. WT: 4774 KGS APPROX AGAINST LF 6400019008. SUBMIT 217 NO'S OF HEAD FORGING AGAINST LF NO. 7500058007. RETURN SCRAP 1069 KGS AGIANST LF 3506692120.

AS PER DRAWING NO 675-58-223.

675-58-223