100% POLY. TAPE 25MM (ROLL LENGTH 100M EXCLUDING SAMPLE)
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Specification
1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load(20 cm X full width)("KN.") Minimum 2.4 IS:1969
6 Nature of material 100% Polyster. IS:667
7 pH Value(Cold Method) 6 to 8.5 IS:1390
8 % Water soluble matter(max) 1% IS:3456
9 Weave 2/2 Twill weave. Visual
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101797674
233090
Metre
20093
OFK/2018/05/IV/1
Ordnance Factory Khamaria
The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005
TRACER & IGNITER SHELL NO.14 MK-6/N EMPTY TO DRG.NO.NAD-2011(2 SHEETS) SHEET NO.1 ARD NO.2427 DT.22-10-2012.SHEET NO.2 NO ARD-2260 DT 20/1/97 TO SPECN: DNAI-IN-L1(a) (TRACER SHELL BE MADE OF SSD-32 MATERIAL ONLY)
Specification
TRACER & IGNITER SHELL NO.14 MK-6/N EMPTY TO DRG.NO.NAD-2011(2 SHEETS) SHEET NO.1 ARD NO.2427 DT.22-10-2012.SHEET NO.2 NO ARD-2260 DT 20/1/97 TO SPECN: DNAI-IN-L1(a) (TRACER SHELL BE MADE OF SSD-32 MATERIAL ONLY)
CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).
Specification
CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).
SET OF PROFEEL PACKING AS PER DESIG REF.CIA/AMN/2394 DRG PT.NO.ISV.438 GA DC NO.36948-A DT.27/01/04 CONSISTING OF:-(1)PADDING OF10 NOsGRENADE=01NO.TO DRG PT NO.ISV-2096(2)HOLDERLAUNCHER=01NO.TO DRG PT.NO.ISV.2097(3)BAG BULLETS=01NO.TODRGPTNO.ISV-2098(4)POUCH RING=02 NOS.TO DRG PT.NO.ISV-2099 DC.NO.36948-A DT.27-01-04 FOR ALL ABOVE ITEMS.
Specification
SET OF PROFEEL PACKING AS PER DESIG REF.CIA/AMN/2394 DRG PT.NO.ISV.438 GA DC NO.36948-A DT.27/01/04 CONSISTING OF:-(1)PADDING OF10 NOsGRENADE=01NO.TO DRG PT NO.ISV-2096(2)HOLDERLAUNCHER=01NO.TO DRG PT.NO.ISV.2097(3)BAG BULLETS=01NO.TODRGPTNO.ISV-2098(4)POUCH RING=02 NOS.TO DRG PT.NO.ISV-2099 DC.NO.36948-A DT.27-01-04 FOR ALL ABOVE ITEMS.
SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE.
Specification
SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE.
Drawing no.
Manufacturing Technology
(i) Extrusion facility.
(ii) Roll Milling for Sheet Preparation.
(iii) Compression Moulding facility.
(iv) Shearing facility.
BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89
Specification
BOX WOOD NO. S2 MK-1 (IN) TO HOLD 3 CARTRIDGES QF 76.2MM PRACTICE SHELL WITH PLUG REPRESENTING FUZE OR PLUGGED HE/PREFRAGMENTED SHELL TO DRAWING NO.ARDE-2077 DT.19NOV10 3SHTSSHT NO.1.R.NO.1 DT.09/12/87 AND SHT NO.3 R NO.2 DT.29/05/89
CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Specification
CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Drawing no.
CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS
CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Specification
CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Drawing no.
CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEV
SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/ME/914 (PROV) DC NO 3496-ME DT.6/2/98 GR. D OR E HARDNESS 70 TO 80 DEGREE
Specification
SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/ME/914 (PROV) DC NO 3496-ME DT.6/2/98 GR. D OR E HARDNESS 70 TO 80 DEGREE
GLASS FABRIC REINFORCED POLYSTER TAPE WIDTH 32 MM IN ROLL OF 50 MTRS.FREE FROM ANY NON UNIFORMITY AND SHOULD HAVEHORIZENTAL AND VERTICLE FEBRIC MAKE OF 3 MM.NOTE:-TECHNICAL REQUITREMENT AS PER ENCLOSURE.
Specification
GLASS FABRIC REINFORCED POLYSTER TAPE WIDTH 32 MM IN ROLL OF 50 MTRS.FREE FROM ANY NON UNIFORMITY AND SHOULD HAVEHORIZENTAL AND VERTICLE FEBRIC MAKE OF 3 MM.NOTE:-TECHNICAL REQUITREMENT AS PER ENCLOSURE.
CARTG. CASE (HALF TOLERANCE) FOR 30MM BMP-II GUN 2A42,EMPTY TO DRG NO 3-0105575 SHEET 1 to 4 DC-36579A DT.3-8-99 TO SPECN:PROGRAMMEAND PROCEDURE OF TESTING BY FIRING GUN 2 A42 AS PER SHEET NO3-0105575-0514 -- M3(2SHEETS) DC-34183-A DT.28-7-87 AS PER PARA 2.2 OF APPENDIX 'A' OF SOP CONTROLLERATE OF QUALITY ASSURANCE (A) KHADKI L/NO. Q.A.15506(MS)/I/72 DT.19/06/2009.
Specification
CARTG. CASE (HALF TOLERANCE) FOR 30MM BMP-II GUN 2A42,EMPTY TO DRG NO 3-0105575 SHEET 1 to 4 DC-36579A DT.3-8-99 TO SPECN:PROGRAMMEAND PROCEDURE OF TESTING BY FIRING GUN 2 A42 AS PER SHEET NO3-0105575-0514 -- M3(2SHEETS) DC-34183-A DT.28-7-87 AS PER PARA 2.2 OF APPENDIX 'A' OF SOP CONTROLLERATE OF QUALITY ASSURANCE (A) KHADKI L/NO. Q.A.15506(MS)/I/72 DT.19/06/2009.
BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Specification
BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIVE GREEN ISC-220 OF IS-5-2007 (SIXTH REVISION)PAINT TO SPECN.IS-168-1993 (THIRD REVISION)(REAFFIRMED-2012) DC NO.3685-ME DT.19/03/01 ( AS APPLICABLEFOR DEFENCE USE) BOXES ARE TO BE SUPPLIED WITHOUT FITMENTS.NOTE:-1. SPECIAL INSTRUCTION FOR TEST FOR BOX C-235 (STEEL)IS ENCLOSED.NOTE:-2. ADVANCE SAMPLE-06 NOS.ARE RECIEVED WHEN ITEM ISBEING DEVOLOPED/SUPPLIED BY NEW SOURCE/FIRM.
Drawing no.
BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERALPURPOSE OLIV
CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM ISBEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM
Specification
CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM ISBEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM
Drawing no.
CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM
CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM.
Specification
CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVELOPED/SUPPLIED BY NEW SOURCE/FIRM.
Drawing no.
CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR
PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.
Specification
PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.
Drawing no.
Manufacturing Technology
1. Press facilty of Phenolic moulding
2. Electrical Resistance test facility
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
Specification
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'.
Specification
CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'.
AS PER PARTICULAR =WIDTH=94 CM
A.P.35+_5 Cuft/Sqft/Sec at 10"WHP
Weight/Sq.Metre=115-117 Gram
Thread /cm-Warp-28,WEft-25
Tex of Yarn
Tex x Fold-Warp-9.4x2,Weft-9.5x2
B.S.in Kg-Warp-53kg(min)
Weft-53kg(min.)
Weave-Plain
Finish-Grey Merecerised
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101221967
2942
Metre
20096
2018000153
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
