UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL

AS PER DRG No K 2050 WITH FIRMS MATERIAL

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

K 2040 STAR 7

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL

AS PER DRG No K 2031

K 2031

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

K 2015

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL

AS PER DRG No. K 1027 WITH FIRM'S MATERIAL

K 1027

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL

AS PER DRG No.TAR-RB-K-1026

TAR-RB-K-1026

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUG PIN FIRING 32P 1002

AS PER DRG PLUG PIN FIRING 32P 1002

32P 10002

LEVEL BOTTLE FOR 40MM UBGL

LEVEL BOTTLE FOR 40MM UBGL

32P 1322

PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL

AS PER DRAWING

32P 4103*2

SCREW AXIS FORE SIGHT TO DRG.NO.32P 1306*(FULLY FINISHED)WITH FIRM'S MATERIAL FOR 40MM UBGL.

AS PER DRAWING

32P 1306*

OVER MOULDING HOUSING SIGHT ASSY AS PER DRG.NO. TEND 2363 REQUIRED FOR 40mm UBGL. (Component will be supplied by OFT on which moulding at both ends have to be carried out by firm) firm)

AS PER DRG.NO. TEND 2363

TEND 2363

MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 4102

MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 4713 (M)

SCREW HOUSING LADDER SIGHT TO DRG NO.32P 1030*4 (FULL FINISHD) WITH FIRM'S MATERIAL FOR 40MM UBGL

AS PER DRAWING

32P 1030*4

SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL

AS PER DRAWING

32P 2102*2

NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL

AS PER DRAWING

32P 1311*3

FORE SIGHT FOR BETA SOURCE TO DRG NO.32P 1305*6 (FULLY FINISHED)WITH FIRM'S MATERIAL FOR 40MM UBGL.

AS PER DRAWING

32P 1305*6

SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2190

SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2192

SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL

AS PER DRAWING

TEND 2191

SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL

AS PER DRAWING

TEND 2193

CLOTH POLYESTER & COTTON DISRUPTIVE PATTERN (220 GSM) FOR JUNGLE WITH ARMY LOGO 152 CMS (MINIMUM) EXCLUDING SELVEDGES to Specification No:PROV/OCFAV/FABRIC/005

Specification No:PROV/OCFAV/FABRIC/005

CLOTH DRILL COTTON NAVY BLUE 142 CMS (V.NO.4) MINIMUM EXCLUDING SELVEDGES (NHQ). SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4

SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4

DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)

DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)

CQA(A) 2346(c)

CQA(A) 2346(c)

CQA(A) 4928

CQA(A) 4928

DRG. NO. ARDE-2064

DRG. NO. ARDE-2064

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

DRG No.0204-03-04-02-14-021-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183

Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183

Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

HOLDING OPENING DEVICE(HOD) DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM (MIM ROUTE)

DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM

MOUNTING RAIL for JVPC 5.56 MM DRG. NO. 0204-03-02-15-28-001-00DF

MOUNTING RAIL

DRG. NO. 0204-03-02-15-28-001-00DF

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route)

Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route)

DRG No. 0204 03 02 00 -01-004-00DC

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Plunger Wheel Lock DRG No. 0204 03 02 02 18 006 00DF for JVPC 5.56MM (MIM Route)

Plunger Wheel Lock DRG No. 0204 03 02 02 18 006 00DF for JVPC 5.56MM (MIM Route)

0204 03 02 02 18 006 00DF

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

32P 1025 GUIDE SPRING PIN FIRING

AS PER DRG NO.32P 1025

32P 1025

OIL BOTTLE TO DRG NO 32P 5005 (CES). REQD FOR UBGL

AS PER DRG NO 32P 5005

32P 5005

Spring Safety Catch TO DRG 32P 1012

AS PER Spring Safety Catch TO DRG 32P 1012

MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL

AS PER DRG NO.32P1008*5

32P1008*5

GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

32P 4002*3

DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL

AS PER DRG NO 32P 5002. REQD FOR UBGL

32P 5002

DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.

AS PER DRAWING NO 32P 5003. REQD FOR UBGL

32P 5003

BRUSH CLEANING BARREL TO DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

AS PER DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

32P 5001

MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2

AS PER DRAWING

32P 4003*2

PACKING BOX TO HOLD 3 WEAPONS AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL

AS PER DRAWING No:32Y 0001 005 E3 REQUIRED FOR UBGL

32Y 0001 005 E3

CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle

AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle

TEND 2369

GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

RFI.SK-4312*12

INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

TEND DRG. No.2310

MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.

AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.

RFI/SK/7470

BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

TEND 1818*(MODIFIED)

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CARD BOARD PACKING CASE AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

TEND 1834*

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 10 RIFLES)TO DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

RFI.SK.6430*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

29P 0048*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

29P 0006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle

.29P 0051*

SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

29P 0065*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING MAIN TO DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

29P 0015

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING LEAF BED BACK SIGHT TO DRG. NO.29P 0008 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle

29P 0008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

29P 0040*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLADE FORE SIGHT 29P 0004* required for 0.315" Sporting Rifle

AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle

29P 0004*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BAND BACK SIGHT TO DRG.NO.29P 0009 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle

29P 0009

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING SCREW BAND INNER TO DRG NO.29P 0061* required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle

29P 0061*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SEAR TO DRG. NO 29P 0058 required for 0.315" Sporting Rifle

AS PER DRG. NO 29P 0058 required for 0.315" Sporting Rifle

29P 0058

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

29P 0041*

• AS PER DRAAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER FRONT TO DRG. NO.29P 0056 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0056 required for 0.315" Sporting Rifle

29P 0056

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW STRIKER TO DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

29P 0017

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SWIVEL SLING FRONT 29P 0070* required for 0.315" Sporting Rifle

AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle

.29P 0070*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER BACK TO DRG. NO.29P 0055 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle

.29P 0055

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

29 P 0002*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BAND INNER TO DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

29P 0067*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COLLER TO DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

29P 0035

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLATE BUTT TO DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

29P 0049

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

29P 0047*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT STOCK WITH WASHERS AS ONE SET CONSISTING:- BOLT STOCK TO DRG.NO.29P 0043*(SP-43 )=10 NOS WASHER BOLT STOCK TO DRG.NO.29P 0066(SP-66)=11 NOS WASHER SPRING BOLT STOCK TO DRG.NO.29P 0069(SP-69)=11 NOS required for 0.315" Sporting Rifle

AS PER DRG

29P 0043*, 29P 0066, 29P 0069

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EXTRACTOR 29P 0021* required for 0.315" Sporting Rifle

AS PER Drg. No. 29P 0021* required for 0.315" Sporting Rifle

29P 0021*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

29P 0007, 29P 0010, 29P 0011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle

AS PER DRG

29P 0028, 29P 0411*, 29P 0460, 29P 0440

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING EXTRACTOR TO DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

29P 0019*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE