DELAY TRAIN TO DRG NO NAI(J) 501/8/3 IN FINISH CONDITION

DELAY TRAIN TO DRG NO NAI(J) 501/8/3 IN FINISH CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AL ALLOY ROD 26.5 MM DIA+/-0.25 MM TO SPECN IS:733

AL ALLOY ROD 26.5 MM DIA+/-0.25 MM TO SPECN IS:733

GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION

GASKET (PAPER) DRG NO NAI(J) 501/7 IN FINISH CONDITION

SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION

AS PER DRAWING

NAI(J)/501/6/4

COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP

COPPER STRIP TO SPECN IS:3487-66 CHEMICAL COMP

MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION

MEMBRANE TO DRG NO NAI(J)/501/6/2 IN FINISH CONDITION

LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION

AS PER DRAWING

NAI(J)501/6/1

steel ball 3.5 mm dia to drg no NAI(J) 501/5 IN FINISH CONDITION

steel ball 3.5 mm dia to drg no NAI(J) 501/5 IN FINISH CONDITION

NAI(J) 501/5

TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION

AS PER DRAWING

NAI(J) 501/2

STEEL ROD 7MM DIA TO SPECN IS-1673 GR-I

STEEL ROD 7MM DIA TO SPECN IS-1673 GR-I

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

SPRING IN F/C PT QX-344

SPRING IN F/C PT QX-344

PIN HINGE TO DRG NO QX-1248 IN F/C

PIN HINGE TO DRG NO QX-1248 IN F/C

SPRING IN FC GSF SK. NO. M 6743 PT QX-341

AS PER DRG.

WASHER TO DRG NO IQX-123 IN FINISH CONDITION

WASHER TO DRG NO IQX-123 IN FINISH CONDITION

IQX-123

CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C

CLIP TO DRG. NO. D3/L/3052/E/374, PT NO QX-439 IN F/C

QX-439

Part No QX 336 for Fuze 162 Mk-8/Mk-9

AS PER DRAWING

QX-336

Magazine to Part No IQX 12 for Fuze 162 Mk-8/Mk-9

AS PER DRAWING

SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9

SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9

IQX-14

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STOP PIN TO DRG NO M-10112 A IN FINISHED CONDITION

AS PER DRAWING

SEPTUM IN FINISH CONDITION TO PART NO QX-338

AS PER DRAWING

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010

AS PER REQUIRED SPECIFICATION

PLASTIC CONTAINER FOR PACKING TRANSPORT EMPTY FUZE 162 MK-8 TO DRG. NO.-M-10700

PLASTIC CONTAINER FOR PACKING TRANSPORT EMPTY FUZE 162 MK-8 TO DRG. NO.-M-10700

BRUSH SHUTTER TO EXTRUSION DRG. NO-F 676/1 FOR Fz 162 MK-8 & MK-9

BRUSH SHUTTER TO EXTRUSION DRG. NO-F 676/1 FOR Fz 162 MK-8 & MK-9

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BRASS ROD 28.5 MM DIA BS 2874-CZ-121, PB-3"M" CONDITION(LATEST ISSUE) STRAIGHT LENGTH 1.828 TO 2.433 MTR

BRASS ROD 28.5 MM DIA BS 2874-CZ-121, PB-3"M" CONDITION(LATEST ISSUE) STRAIGHT LENGTH 1.828 TO 2.433 MTR

AL ROD 22 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ROD 22 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 8 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 8 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 12 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 12 MM +/- 0.1 MM DIA TO SPECN IS:733

AL ALLOY ROD 17 MM +/- 0.1 SPECN IS: 733

AL ALLOY ROD 17 MM +/- 0.1 SPECN IS: 733

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PRE-MACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO.TEND 2449*2 WITH OFT RAW MATERIAL

AS PER DRG NO.TEND 2449*2 WITH OFT RAW MATERIAL

TEND 2449*2

CORRUGATED PAPER BOARD PACKING CARTON TO DRG.NO.SK-9468/A(30MM GHASHA)

CORRUGATED PAPER BOARD PACKING CARTON TO DRG.NO.SK-9468/A(30MM GHASHA)

PROTECTIVE PLUG FOR SHELL BODY TO DRG.NO.SK-7747/B(30MM GHASHA)

PROTECTIVE PLUG FOR SHELL BODY TO DRG.NO.SK-7747/B(30MM GHASHA)

COPPER TUBE TO SPECN.GOST B17646-78, GR.M2 IN COLD DRAWNCOND.HAVING STRAIGHT LENGTH 2-3M.MECH.PROPERTIES IN SOFTCOND.AS PER GOST B17646-78,GR.M2 AND CHEMICAL PROPERTIES ASPER GOST 859-78,GR.M2, SIZE:35.00+/-0.15MM O/DX2.5 +/-0.25MMW/T. (GOST B17646-78 & GOST 859-78 IS ATTACHED FOR REFERENCE

COPPER TUBE TO SPECN.GOST B17646-78, GR.M2 IN COLD DRAWNCOND.HAVING STRAIGHT LENGTH 2-3M.MECH.PROPERTIES IN SOFTCOND.AS PER GOST B17646-78,GR.M2 AND CHEMICAL PROPERTIES ASPER GOST 859-78,GR.M2, SIZE:35.00+/-0.15MM O/DX2.5 +/-0.25MMW/T. (GOST B17646-78 & GOST 859-78 IS ATTACHED FOR REFERENCE

Hot rolled and Cold – hardened sized steel of grade 50 to spcTY-14-1-2884-80 with chem. comp, as per table 1,Inclusion rating as per clause no. 2.6 of the specn. Grain size 5 to 8& mech. properties as per spcn.GOST V(B)10230-75,Table 5, Size Steel rod 32 (+0.0/-0.16)dia in straight length of 2-3M

Hot rolled and Cold – hardened sized steel of grade 50 to spcTY-14-1-2884-80 with chem. comp, as per table 1,Inclusion rating as per clause no. 2.6 of the specn. Grain size 5 to 8& mech. properties as per spcn.GOST V(B)10230-75,Table 5, Size Steel rod 32 (+0.0/-0.16)dia in straight length of 2-3M

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

CORRUGATED FIBRE BOARD PACKING CARTON TO DRG.NO. FS-2389 D.

PLASTIC CONTAINER TO DRG.NO. FS-547 IN FUZE-24A

PLASTIC CONTAINER TO DRG.NO. FS-547 IN FUZE-24A

LOCKING SLEEVE TO OFAJ DRG.NO. FS-525

LOCKING SLEEVE TO OFAJ DRG.NO. FS-525

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA

CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.

CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.

SPRING STEEL WIRE TO SPECN. BS:5216 CODE ND OR HD GRADE 2 OR3 IN COIL FORM, SIZE:- O.5 +/- 0.012 MM DIA

SPRING STEEL WIRE TO SPECN. BS:5216 CODE ND OR HD GRADE 2 OR3 IN COIL FORM, SIZE:- O.5 +/- 0.012 MM DIA

SPRING STEEL WIRE TO SPECN. IS:4454, PT.I, GR.3 SIZE 0.56 MMDIA (SWG-24)(STD.TOL.).

SPRING STEEL WIRE TO SPECN. IS:4454, PT.I, GR.3 SIZE 0.56 MMDIA (SWG-24)(STD.TOL.).

BRASS ROUND TO SPECN BS EN 12164:1998 SYMBOL CuZn 39Pb3(NUMBER CW 614 N) MATERIAL CONDITION R 430 IN STRAIGHT LENGTOF 2 TO 3 METERS SIZE : 15.00 +/- 0.1 MM DIA

BRASS ROUND TO SPECN BS EN 12164:1998 SYMBOL CuZn 39Pb3(NUMBER CW 614 N) MATERIAL CONDITION R 430 IN STRAIGHT LENGTOF 2 TO 3 METERS SIZE : 15.00 +/- 0.1 MM DIA

COPPER STRIP TO BS/STA7/C3 OR C10 CONDITION 1/2 H SIZE:0.25+ 0.012 MM THICKNESS X 22 MM WIDE IN COIL FORM

COPPER STRIP TO BS/STA7/C3 OR C10 CONDITION 1/2 H SIZE:0.25+ 0.012 MM THICKNESS X 22 MM WIDE IN COIL FORM

SEALING DIAPHRAGM T0 OFAJ DRG. NO. FS-526

SEALING DIAPHRAGM T0 OFAJ DRG. NO. FS-526

HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.

HOT ROLLED AND COLD DRAWN CARBON STEEL ROUND TO SPECN.BS:970 PT.I-1983 GRADE 080M40 HAVING STRAIGHT LENGTH OF 3 MTR. WITH 10% SHORTS DOWN TO 2 - 3 METRES SIZE: 7.5 - 0.05 MM DIA.

CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA

CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS970(PART1) 1983 GRADE 080M40 TO "R" CONDITION WITH MINIMUM UTS 686 MPAAND IN STRAIGHT LENGTH OF 3 TO 4 METRESSIZE: 4.00 - 0.08 MM DIA

ALUMINIUM ALLOY ROUNDS TO SPECN: BS 1474-1972 NE-4HAVING STRAIGHT LENGTH OF 2 TO3 METRES SIZE: 14+0.05/-0.10 MM DIA.

ALUMINIUM ALLOY ROUNDS TO SPECN: BS 1474-1972 NE-4HAVING STRAIGHT LENGTH OF 2 TO3 METRES SIZE: 14+0.05/-0.10 MM DIA.

ALUMINIUM ALLOY ROUNDS TO SPECN:BS 1474-1972 NE-4 HAVINGSTRAIGHT LENGTH OF 3 TO 4 METRES SIZE 8.5+0.05/-0.10 MM DIA

ALUMINIUM ALLOY ROUNDS TO SPECN:BS 1474-1972 NE-4 HAVINGSTRAIGHT LENGTH OF 3 TO 4 METRES SIZE 8.5+0.05/-0.10 MM DIA

ALUMINIUM ALLOY ROUND TO SPECN.IS-733-24345 W OR WP CONDN. OR SPECN.BS:1474 GRADE 2014 A SIZE : 8.00+/-0.05 MM DIA

ALUMINIUM ALLOY ROUND TO SPECN.IS-733-24345 W OR WP CONDN. OR SPECN.BS:1474 GRADE 2014 A SIZE : 8.00+/-0.05 MM DIA

ALUMINIUM ALLOY STRIP TO BS 1470- HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4-1/2 H OR NS 5-1/4 H SIZE: 0.5 + 0.03 MMTHICKNESS X 22 MM WIDE IN COIL FORM.

ALUMINIUM ALLOY STRIP TO BS 1470- HS 14 OR HS 15 CONDITION W OR BS 1470 NS 4-1/2 H OR NS 5-1/4 H SIZE: 0.5 + 0.03 MMTHICKNESS X 22 MM WIDE IN COIL FORM.

SEALING WASHER TO OFAJ DRG.NO. FS-527 A

SEALING WASHER TO OFAJ DRG.NO. FS-527 A

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 250 TO 300 VPN TOSPECN.BS:970 EN-56D HARDENED AND TEMPERED TO T CONDITIONOR BS:970 EN-57 OR EN-58 HAVING ST.LENGTH OF 2 TO 3 METRESSIZE: 10 -0.05 MM DIA

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 200 TO 250 VPN TOSPECN.BS:970 EN-56 HARDENED AND TEMPERED TO R CONDITION ORBS:970 EN-57 HAVING ST.LENGTH OF 2 TO 3 METRES. SIZE: 3.5 -0.05 MM DIA

UPPER HAND GUARD ASSY AS PER DRG No K 2050 WITH FIRMS MATERIAL

AS PER DRG No K 2050 WITH FIRMS MATERIAL

K 2050

CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.

CHROMIUM RUST RESISTING BRIGHT FINISHED STEEL ROUNDS TO SPECN. BS:970 GRADE EN-56D/57/58 IN "T" CONDITION WITH MIN. UTSOF 696 MPA HAVING ST. LENGTH OF 3 TO 4 METRES. SIZE :- 8.00-0.08 MM DIA.

CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.

CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.

BALL ANTIFRICTION TO OFAJ DRG. NO. FS-528 A

BALL ANTIFRICTION TO OFAJ DRG. NO. FS-528 A

CONVERSION OF STEEL ROUND BAR TO SIZE:25 +/-0.1 MM DIAAGAINST ITEM CODE: 0334008025 INTO 11-0.05 MM DIA WITH ENDCHAMFERING 3 MM IN 45 DEGREE AND STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM PER METER LENGTH BY PEELING & GRINDING.

CONVERSION OF STEEL ROUND BAR TO SIZE:25 +/-0.1 MM DIAAGAINST ITEM CODE: 0334008025 INTO 11-0.05 MM DIA WITH ENDCHAMFERING 3 MM IN 45 DEGREE AND STRAIGHTNESS LESS THAN OREQUAL TO 0.3 MM PER METER LENGTH BY PEELING & GRINDING.

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM DIA

BRIGHT FINISHED STEEL ROUNDS WITH HARDNESS 340 TO 390 BHN TO SPECN BS 970 EN-56 HARDENED AND TEMPERED TO X CONDITION ORBS:970 EN-25 OR EN-24 HARDENED AND TEMPERED TO X CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES. SIZE: 11 -0.05 MM DIA

NI-CR-MO STEEL ROUNDS TO SPECN. BS:970-PT.2(LATEST ISSUE) GRADE 817M40 IN "X" CONDITION HAVING STRAIGHT LENGTH OF 3 TO4 METRES, SIZE:- 10.5 MM DIA.

NI-CR-MO STEEL ROUNDS TO SPECN. BS:970-PT.2(LATEST ISSUE) GRADE 817M40 IN "X" CONDITION HAVING STRAIGHT LENGTH OF 3 TO4 METRES, SIZE:- 10.5 MM DIA.

CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.

CONV.OF CARBON STEEL ROUND BAR SIZE:32.5 -0.1MM DIA TO SPECN BS:970-PT-I-1983 GR.080M40 (I/C:0142003032) IN STRAIGHT LENGTH OF 2 TO 3 MTR.(10% MAX SHORTS DOWN TO 1.5 MTRS. PERM ITTED) BY GRINDING & PEELING INTO 28 +/-0.05MM WITH STRAIGHT -NESS LESS THAN OR EQUAL TO 0.3MM PER METER LENGTH.

CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DIA

CARBON STEEL COLD DRAWN BRIGHT ROUNDS TO SPECN. BS-970(PT-1) 1983 GRADE 080M40 IN "R"CONDITION HAVING MINIMUM UTS OF 696MPA,HARDNESS 200 TO 250 VPN IN STRAIGHT LENGTH OF 2 TO 3 MTRWITH 10% SHORTS DOWN TO 1.5 METRES SIZE: 19.00 +/- 1 MM DIA

WASHER PLUG TRANSIT TO OFAJ DRG. NO. FS-524 D

WASHER PLUG TRANSIT TO OFAJ DRG. NO. FS-524 D

ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.

ALUMINIUM STRIP TO SPECN. BS: 1470 GR. S 1B IN "O" CONDITIONIN COIL FORM, SIZE:- 0.3 + 0.03/- 0.05 MM THICK X 40 +/- 0.2 MM WIDE.

CUP NOSE TO OFAJ DRG.NO.FS-523(ARDE DRG.NO.1158 DET-6)

CUP NOSE TO OFAJ DRG.NO.FS-523(ARDE DRG.NO.1158 DET-6)

PLUG TRANSIT TO ARDE DRG.NO.1158 DET-7.

PLUG TRANSIT TO ARDE DRG.NO.1158 DET-7.

ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

ALUMINIUM ALLOY ROD WITHOUT PERIPHERAL GRAIN GROWTH TO SPECIFICATION BS:1474 HE-15 IN TF CONDITION HAVING STRAIGHT LENGTH OF 2 TO 2.5 METRES SIZE:23.50 -0.052 MM DIA HAVING STRAIGHTNESS LESS THAN OR EQUAL TO 0.3 MM/MTR

ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.

ALUMINIUM ALLOY ROUND BAR TO SPECIFICATION BS:1474:1987GRADE 2014 A IN T6 CONDITION HAVING STRAIGHT LENGTH OF 2 TO2.5 METRES AND PERIPHERIAL GRAIN GROWTH OF MAXIMUM 3.00 MMON RADIUS TO SIZE: 28 MM +/- 0.32 MM.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.

ALUMINIUM ALLOY CIRCULAR DISC (MFD. FROM COLD ROLLED PLATE) TO SPECN.IS:736-1986(REF.2001)65032 IN W or WP COND.OR BS:1470 HS-20 OR HS-30 IN W or WP COND.TEST PIECE SHALL BE TESTEDIN "WP CONDITION. MATERIAL SHOULD BE ABLE TO GET FLOW-TURNEDSIZE:150 +/- 2 MM DIA.X 9.52 +/- 0.2 MM THICK.

STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

STEEL GROUND ROUND BARS TO SPECN: BS:970-1983 GRADE 070M20IN NORMALISED CONDITION IN STRAIGHT LENGTH OF 2 TO 3 METERSTO SIZE:19.00 -0.052 MM DIA HAVING STRAIGHTNESS LESS THANOR EQUAL TO 0.3 MM/MTR

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA

BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA

PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT

PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT

PACKING CARTON TO OFAJ DRG. NO. FS-986 E FOR FIN ASSLY.

PACKING CARTON TO OFAJ DRG. NO. FS-986E FOR FIN ASSLY.

BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.

BRIGHT FINISHED CHROMIUM RUST RESISTING STEEL ROUNDS TOSPECN.BS:970 PT.I/1983 GRADE 410S21 HEAT TREATED TO "R"CONDITION HAVING STRAIGHT LENGTH OF 3 MTRS.WITH 10% SHORTS DOWN TO 2-3 MTRS SIZE : 5.5 -0.08 MM DIA.

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA

CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA