DRG.NO.OFDR/CT /19/ UI/A-4 (AMENDMENT NO.88 DT.9-5-98)

DRG.NO.OFDR/CT /19/ UI/A-4 (AMENDMENT NO.88 DT.9-5-98)

DRG NO OFDR/CT/17/UI/A4

DRG NO OFDR/CT/17/UI/A4

DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)

DRG NO OFDR/CT/14/UI A3 (AMENDMENT NO.88 DT 9/5/98)

DRG. NO. OFDR/CT/7/UI/A3

DRG. NO. OFDR/CT/7/UI/A3

DRG NO OFDR/CT/4/M/U-1/A4 (AMDT NO.60 DATED 11-11-96)

DRG NO OFDR/CT/4/M/U-1/A4 (AMDT NO.60 DATED 11-11-96)

DRG NO.OFDR/CT/41/M/UI/A-3

DRG NO.OFDR/CT/41/M/UI/A-3

DRG.NO.OFDR/CT/37/UI/A-4/R-14.

DRG.NO.OFDR/CT/37/UI/A-4/R-14.

DRG NO.OFDR/CT/35/M/UI/A-3.AMDT. SL NO.160 DT. 28/05/2005

DRG NO.OFDR/CT/35/M/UI/A-3.AMDT. SL NO.160 DT. 28/05/2005

DRG.NO.OFDR/CT/32/UI/A-4/R-14

DRG.NO.OFDR/CT/32/UI/A-4/R-14

DRG NO.OFDR/CT/30/M/A-2. DATED 05/11/1996

DRG NO.OFDR/CT/30/M/A-2. DATED 05/11/1996

OFDR/CT/31/M1/U-I/A4

OFDR/CT/31/M1/U-I/A4

DRG. NO. OFDR/CT/40/M/U-I/A-3 DT.20/07/2010.

DRG. NO. OFDR/CT/40/M/U-I/A-3 DT.20/07/2010.

DRG.NO. OFDR/CT/34M/ U-I/A4

DRG.NO. OFDR/CT/34M/ U-I/A4

DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV).

DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV).

DRG NO NAD 6027 SHEET 2 OF 2 & TO DRG.NO.NAD 6028

DRG NO NAD 6027 SHEET 2 OF 2 & TO DRG.NO.NAD 6028

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DGOF/OFDR/008 [DRG NO. OFDR/CT/24/A3]

DGOF/OFDR/008 [DRG NO. OFDR/CT/24/A3]

PRESSURE RING FORGING DRG NO FG 765 15 113 3

PRESSURE RING FORGING DRG NO FG 765 15 113 3

DRG NO FG 765 15 113 3

BUBBLE SPIRIT GLASS

BUBBLE SPIRIT GLASS, DRG NO. OPT/MISC/360

DRG NO. OPT/MISC/360

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM

PROTECTIVE GLASS TO DRG. NO. BL4496030

PROTECTIVE GLASS TO DRG. NO. BL4496030

BL4496030

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

• MSME

• WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

White Colour To Specn.No.CS-5301-B

White Colour To Specn.No.CS-5301-B

• MSME

• White Colour To Specn.No.CS-5301-B

WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

• MSME

• WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

• MSME

• WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

• MSME

• VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg No. 4085566 & Drg. No. 4085565 & Drg. No. 13 S 002 As per OFBA Requirement

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

• MSME

• TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

• MSME

• TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

• MSME

• TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

• msme

• THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

• MSME

• THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

• MSME

• TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

• MSME

• TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

• MSME

• SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

• MSME

• STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

• MSME

• COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

• MSME

• SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

• MSME

• SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06

• MSME

• SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

SILASTIC RTV 1080 RESIN AS PER SPECIFICATION : TYPE-RTV NEUTRAL CURE SILICON SEALANT, COLOUR-TRANSLUCENT, SPECIFIC GRAVITY AT 25 DEG CEL-1. 03, EXTRUSION RATE (G/MIN) - 350.

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

• MSME

• SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

• MSME

• HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

• MSME

• RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

• MSME

• RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

• MSME

• RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

• MSME

• QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

JSPRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

• MSME

• PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

• YES

• YES

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

• MSME

• Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

• MSME

• PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

• MSME

• PENTA ERYTHRITOL CONFORMING TO SPECIFICATION NO,IND/ME/799 (a)-DC(I) 3754-ME DTD.12.12.2002.

IS:7401-1987 Reaffirmed 2005

IS:7401-1987 Reaffirmed 2005

READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

• MSME

• READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

CQA(A) KIRKEE DRAWING NO.13603-0-0.

• MSME

• PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

AS PER OFBA DRG. NO. OFBA/CX/272

AS PER OFBA DRG. NO. OFBA/CX/272

AS PER OFBA DRG. NO. OFBA/CX/272

PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/088-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9

PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/083-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9

PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

• MSME

• PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

• MSME

• PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

MODERANT NIOGEN-OEC (OLIGO ETHER ACRYLATE) TY-6-01-450-76 [HIGH GRADE] AS PER RUSSION SPECIFICATION

MODERANT NIOGEN-OEC (OLIGO ETHER ACRYLATE) TY-6-01-450-76 [HIGH GRADE] AS PER RUSSION SPECIFICATION

AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

• MSME

• AS PER SPECIFICATION NO.-IS 1089-1986 (REAFFIRMED-2020) WITH SPECIAL CONDITION FREE SO3-22 TO 25%.

MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

• MSME

• MS TARGET PLATE FOR FLSC-25 SPECIFICATION:MILD STEEL TARGET SHEET IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION: 1000 MM(L) X 300 MM(W) X 4 MM(T)

No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

• MSME

• No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)

MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

• MSME

• MS ROD OF SIZE 50 MM DIA X 100 MM LENGTH AS PER IS 2062-2011 (Reaffirmed 2016)

MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

• MSME

• MINERAL JELLY TO SPECIFICATION JSS-8030-09-2016,REV. NO.3.

METRO ARK SILICON-17

METRO ARK SILICON-17

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

• MSME

• ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.

• MSME

• METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.