LEVER BALL VENTURI FASTENING STRAP to drg. no-IRCL 566

AS PER DRAWING

APERTURE SIGHT PART NO. F 1303-032270 D

AS PER DRAWING

CARRYING SLING ASSY. TO DRG. NO. 1303-026820 E IN F/C

AS PER DRAWING

METALLIC LOGO TO DRG. NO. CTM-0115 IN F/C

AS PER DRAWING

CTM-0115

TORSION SPRING TO DRG. NO. CTM-0114 A IN F/C

AS PER DRG

CTM-0114

SET OF STOCK RT & STOCK LT DRG CTM-0138 & CTM-0137

AS PER DRAWING

MAGAZINE SUB ASSY. TO DRG. NO. CTM-0112 IN F/C

AS PER DRAWING

CTM-0112

PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6

AS PER DRAWING

CTM-0111/1 TO CTM-0111/6

RECEIVER INVESTMENT CASTING TO DRG NO C 2272 D

AS PER DRAWING

C 2272-D

Store Drg No M-8194B

Store Drg No M-8194B

0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION. NOTE:- FIRM MAY GIVE ALT. OFFER OF THE BOX WITH STEEL LOCK(PLATED GOLDEN COLOUR) INSTEAD OF BRASS LOCK REMAINING OTHER PARAMETER UNCHANGED

0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION. NOTE:- FIRM MAY GIVE ALT. OFFER OF THE BOX WITH STEEL LOCK(PLATED GOLDEN COLOUR) INSTEAD OF BRASS LOCK REMAINING OTHER PARAMETER UNCHANGED

PACKING BOX FOR 10 NOS PISTOL CABINET FOR 0.32" MODIFIED PISTOL TO DRG NO: CO-527

PACKING BOX FOR 10 NOS PISTOL CABINET FOR 0.32" MODIFIED PISTOL TO DRG NO: CO-527

CO-527

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING BOX FOR 05 NOS PISTOL CABINETS FOR 0.32" MODIFIED PISTOL TO DRG. NO: CO-528

PACKING BOX FOR 05 NOS PISTOL CABINETS FOR 0.32" MODIFIED PISTOL TO DRG. NO: CO-528

CO-528

• AS PER ATTACHMENT

• AS PER ATTACHMENT

P.P. CORRUGATED PACKING BOX TO DRG. NO. CO-519

P.P. CORRUGATED PACKING BOX TO DRG. NO. CO-519

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CATCH MAGAZINE TO DRG. NO. CTM-0116M IN F/C

AS PER DRAWING

EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC

AS PER DRAWING

DRG. NO.M-9106A FOR 0.32" PISTOL

DRG. NO.M-9106A FOR 0.32" PISTOL

PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM-0030 A

AS PER DRAWING

CTM-0030 A

SPRING RETURN IN F/C TO GSF DRG NO M-8278A (PB-14)

AS PER DRAWING

M-8278 A

HOUSING LEVER SEAR TO DRG NO M 8201 C (PB-8) DT 10.10.18 IN F/C FOR 0.32" PISTOL

HOUSING LEVER SEAR TO DRG NO M 8201 C (PB-8) DT 10.10.18 IN F/C FOR 0.32" PISTOL

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01)

PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01)

AS PER DRG & SPECIFICATION

AS PER DRG & SPECIFICATION

CAP SPRING RETURN OPENER TO DRG. NO. CTM-0126 IN F/C

AS PER DRAWING

CTM-0126

Cap Spring Return to Drg. No. CTM-0125/1 TO 6 IN F/C

AS PER DRAWING

CTM-0125/1 TO 6

SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL PLATING WITH BLACK REFLECTIVE DEPOSITE PH:7 TO 7.5 THICKNESS OF DEPOSITION 80 TO 12 MICRON ON COMPONENT: CTM-0108/2, 0109/2, 0129/2, 0130/2, 0116/2, 0131/2, 0121/2, 0128/2, 0127/2, 0125/2, 0112, 0110/2, 0111/2, AND PB-32

SURFACE TREATMENT OPERATION VIZ. ELECTROLESS NICKEL PLATING WITH BLACK REFLECTIVE DEPOSITE PH:7 TO 7.5 THICKNESS OF DEPOSITION 80 TO 12 MICRON ON COMPONENT: CTM-0108/2, 0109/2, 0129/2, 0130/2, 0116/2, 0131/2, 0121/2, 0128/2, 0127/2, 0125/2, 0112, 0110/2, 0111/2, AND PB-32

SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON ON COMP PB1, PB3, PB6, PB7, PB9, PB10, PB 15, PB23, PB 32, PB39, PB41 & CTM 0099

SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SURFACE TREATMENT OPERATION VIZ: BLACK CHROMIUM PLATING THICKNESS OF DEPOSITION 5 TO 7 MICRON ON COMP: CTM-0108/3,0109/3,0129/3,0130/3,0116/3,0131/3,0121/3,0128/3,0127/3,0125/3,0112,0110/3,0111/3 AND PB-32

SURFACE TREATMENT OPERATION VIZ: BLACK CHROMIUM PLATING THICKNESS OF DEPOSITION 5 TO 7 MICRON

PIN FIRING FRONT (PB-22) TO DRG. NO-CTM-0029A IN FINISHED CONDITION

AS PER REQUIRED DRG.

CTM-0029A

DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL

DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL

SPRING HAMMER TO DRG.NO.M-8277-B (PB-13) IN FINISHED CONDITION.

AS PER DRG

M 8277-B

TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION

AS PER DRAWING

CTM-00033A

HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL

AS PER DRAWING

CTM-0110 TO CTM-0110/6

RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6

AS PER DRAWING

CTM-0108/1 TO CTM-0108/6

FORGING OF SLIDE TO DRG. NO. RFI SK-9073 FOR PISTOL

As per Drawing

SK-9073

HOLSTER MADE OF LEATHER TO ACCOMMODATE MODIFIED O.32" PISTOL

AS PER DRAWING

CTM-0133

PISTOL BOX FOR 0.32" MODIFIED PISTOL TO DRG. NO. CTM-0132 A IN F/C

AS EPR DRAWING

CTM-0132

PACKING BOX TO DRG NO CO 385 A IN FINISH CONDITION 30 MM BALLISTIC CRUSHER BARREL

AS PER DRAWING

CO-385 A

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Packing Box Drg. No. CO-427B

Packing Box Drg. No. CO-427

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HEAT TREATMENT OF BREECH BLOCK FOR 30 MM BALLISTIC CRUSHER BARREL AS PER STORE DRAWING NO. ATK 6-689-043

AS PER DRG.

ATK 6-689-043

HEAT TREATMENT OF 30 MM BALLASTIC CRUSHER BARREL AS PER DRG NO M 11215

AS PER DRAWING

M-11215

STEEL CASTING FOR ARC TO STORE DRG. NO. BOF 301470, DC(I) NO. 19503-W dT. 16-05-16, CASTING DRAWING NO:- C-2350

STEEL CASTING FOR ARC TO STORE DRG. NO. BOF 301470, DC(I) NO. 19503-W dT. 16-05-16, CASTING DRAWING NO:- C-2350

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GEAR CUTTING OF ARC TO DRG. NO: BOF-3014739

AS PER DRAWING

SLING TO D S CAT NO 1010 000882

AS PER DRAWING

SIGHT GRENADE TO D S CAT NO 1005 001755

AS PER DRAWING

SPRING IN FINISHED CONDITION TO DRG. NO. BOF-5044601

SPRING IN FINISHED CONDITION TO DRG. NO. BOF-5044601

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-445A F/C

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BOX WOOD IA TO DS CAT NO. 8115-000580 IN FINISHED CONDITION

BOX WOOD IA TO DS CAT NO. 8115-000580 IN FINISHED CONDITION

FORGING FOR LEVER FIRING DSCAT NO-1010-001332 SHT 3

AS PER DRAWING

• as per attachment

• as per attachment

SPRING HELICAL COMPRESSION D.S.CAT NO:5360-01730

AS PER DRAWING

SPRING HELICAL COMPRESSION D.S.CAT NO:5360-01729

AS PER DRAWING

FORGING FOR BR.BASE TO DS.CAT.NO.1010-00 1323 SHT.6, DESIGN.NO.ARDE-1917 SHT.3.

FORGING FOR BR.BASE TO DS.CAT.NO.1010-00 1323 SHT.6, DESIGN.NO.ARDE-1917 SHT.3.

BARREL MORTAR (FORGING) DRG. NO. F-2255

BARREL MORTAR (FORGING) DRG. NO. F-2255

F 2255

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BOLT CATCH TO D.S. CAT NO 5306-006656

AS PER DRAWING

5306-006656

WOODEN PACKING BOX TO DRG NO CO 515 IN FINISH CONDITION

AS PER DRAWING

CO-515

• AS PER ATTACHMENT

• AS PER ATTACHMENT

WOODEN TRANSIT BOX DRG NO CO 483 B

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BOX TRANSIT 3A TO DRG. NO. ICM 2240 (SHT. NO. 1 & 2) TO ICM 2245

BOX TRANSIT 3A TO DRG. NO. ICM 2240 (SHT. NO. 1 & 2) TO ICM 2245

BOX TO DRG. NO. GF-125245 IN F/C

AS PER DRAWING

Twin Container Assy (without lable) to DRG No IRCL-494 for sub calibre adaptor 219.9 mm to dc(I) no. 18834-w DT. 20-12-03

AS PER DRAWING

HAMMER TO DRG. NO: F-1312-190230 IN FINISHED CONDITION

AS PER DRAWING

F 1312-190230

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CARTRIDGE CATCH SPRING TO DSCAT NO 1055-000547

AS PER DRAWING

FIRING PIN SPRING TO D. S. CAT NO 1055-000552

AS PER DRAWING

BOLT CASTING TO DRG. NO. F-1312-190260 DC(I) 18834-W

AS PER DRAWING

DIFFUSER AIR 765 78 SB383

DIFFUSER AIR 765 78 SB383

BRIDGE 765 17 CD132

BRIDGE 765 17 CD132

PRESSURE DISC 765 12 2

PRESSURE DISC 765 12 2

ALUMINIUM COPPER MASTER ALLOY II OF COMPOSITION CU-18 TO 22%, SI-0.50 % MAX, FE-0.60% MAX.

SPECN. IS:2047 - 1992 REAFFIRMED 2017.

• *File Uploaded.

• *File Uploaded.

VCI POLYTHENE BAGS FOR 30MM SARATH

AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE.

VCI POLYTHENE BAG FOR 20 MM AMR.

AS PER THE SPECIFICATION MENTIONED IN THE OTE PUBLISHED FOR THE ITEM VIDE TENDER REFERENCE NO.111MMETT18001239.

BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER

BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER

BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER

• Forming & Machining, Machining, Machining or MIM Route, Tig Welding and assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.

Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB

Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB

DRG NO. 0204-03-03-02-15-000-00DB

Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed

Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed

ARDE/SK/108/010

BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005

BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005

ARDE/SK/108/005

• Forging, Machining and testing equipment

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.

CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG

CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG

RG. NO. 0204-03-02-22-35-001-00DG

Specification -IND/TC0161 As per relevant clause of specification

Specification -IND/TC0161 As per relevant clause of specification

DISC TO DRG. NO. NAI(J ) 550/1/1(P) IN FINISHED CONDITION FOR AK-630 DUMMY DRILL STORE.

AS PER DRAWING

NAI(J ) 550/1/1(P)

ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV)

ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV)

DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (P

• MACHINING

• MICROMETER

As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11

As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11

Double Layer Bonded Polyester Fleece white 150cm width Specification- IND/TC/1208. AS PER RELEVANT CLAUSE OF SPECIFICATIONS PER RELEVANT CLAUSE OF SPECIFICATION

Specification- IND/TC/1208. AS PER RELEVANT CLAUSE OF SPECIFICATIONS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014

SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING / INSPECTION FACILITY FILES