ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

FABRICATION, SUPPLY AND FITMENT OF LAUNDER SYSTEM AS PER ANNEXURE A

FABRICATION, SUPPLY AND FITMENT OF LAUNDER SYSTEM AS PER ANNEXURE A

RELINING OF CERAMIC FOAM FILTER BOX WITH FUSED SILICA BASED CASTABLE REFRACTORY,HYDROPHOBIC MICROPOROUS HIGH DENSITY HIGH TEMPERATURE INSULATION PANELS AND CERAMIC FIBRE BOARD.

RELINING OF CERAMIC FOAM FILTER BOX WITH FUSED SILICA BASED CASTABLE REFRACTORY,HYDROPHOBIC MICROPOROUS HIGH DENSITY HIGH TEMPERATURE INSULATION PANELS AND CERAMIC FIBRE BOARD.

MICRO VALVE (FOR ENCON-2A BURNER)

MICRO VALVE (FOR ENCON-2A BURNER)

FILM BURNER (ENCON-2A),CAPACITY-UP TO 20 LTR./HRS.

FILM BURNER (ENCON-2A),CAPACITY-UP TO 20 LTR./HRS.

FIXING PLATE AS PER DRG.NO.DC-109 B.

FIXING PLATE AS PER DRG.NO.DC-109 B.

T-PLATE RET NUT, AL-TAPERD 16 INCH SM,REFNO 41997,WAG STAFF ITEM NO.45020

T-PLATE RET NUT, AL-TAPERD 16 INCH SM,REFNO 41997,WAG STAFF ITEM NO.45020

MOULD BOTTOM COVER ASSY ,MC III/III 16 INCH TABLE 15.935 ASI.094 REF NO 41997 WAG STAFF ITEM NO 42010

MOULD BOTTOM COVER ASSY ,MC III/III 16 INCH TABLE 15.935 ASI.094 REF NO 41997 WAG STAFF ITEM NO 42010

BAFFLE RING MC 16 INCH TABLE , REF NO.41997 WAG STAFF ITEM NO PN1N3

BAFFLE RING MC 16 INCH TABLE , REF NO.41997 WAG STAFF ITEM NO PN1N3

SEAL SILICON EXTRUDED, MC III 16 INCH REF NO 32700207-000 WAG STAFF ITEM NO PN9EZ

SEAL SILICON EXTRUDED, MC III 16 INCH REF NO 32700207-000 WAG STAFF ITEM NO PN9EZ

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

RFI.SK.10367

CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434

CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434

CIA(FC)2434

BURNER NOZZLE 16 GPH FOR FBR ITALY BURNER MODEL NO.FGP 150/2

BURNER NOZZLE 16 GPH FOR FBR ITALY BURNER MODEL NO.FGP 150/2

BURNER NOZZLE 14 GPH FOR FBR ITALY BURNER MODEL NO FGP 150/2

BURNER NOZZLE 14 GPH FOR FBR ITALY BURNER MODEL NO FGP 150/2

HEXAGONAL BORON NITRIDE RELEASING AGENT (POWDER) WITH MORE THAN 98.5% PURITY, SUITABLE FOR LUBRICATING ALUMINIUM-BILLETS DUMMY BLOCKS & DIES, WITH GRAIN SIZE 2 MICRONS (APPROX).

HEXAGONAL BORON NITRIDE RELEASING AGENT (POWDER) WITH MORE THAN 98.5% PURITY, SUITABLE FOR LUBRICATING ALUMINIUM-BILLETS DUMMY BLOCKS & DIES, WITH GRAIN SIZE 2 MICRONS (APPROX).

LDP HEAVY DUTY POLYTHENE BUBBLE FILM 1.5 METER WIDTH, 70 GSM IN LENGTH OF 100 METERS

LDP HEAVY DUTY POLYTHENE BUBBLE FILM 1.5 METER WIDTH, 70 GSM IN LENGTH OF 100 METERS

CARBON BONDED SILICON CARBIDE CRUCIBLE TPC-412, OR EQUIVALENT HEIGHT :800MM, TOP OD:616MM, BOTTOM OD : 355MM, SPOUT:200MM WITH RECESS AT BOTTOM ALONG-WITH STAND WITH SIPGOT HAVING, TOP OD:350MM, BOTTOM OD:250MM HEIGHT:175MM.

CARBON BONDED SILICON CARBIDE CRUCIBLE TPC-412, OR EQUIVALENT HEIGHT :800MM, TOP OD:616MM, BOTTOM OD : 355MM, SPOUT:200MM WITH RECESS AT BOTTOM ALONG-WITH STAND WITH SIPGOT HAVING, TOP OD:350MM, BOTTOM OD:250MM HEIGHT:175MM.

CRUCIBLES TO DRG.NO.DC-34G

CRUCIBLES TO DRG.NO.DC-34G

THIMBLE RING AS PER DRG. NO. FDY-304

THIMBLE RING AS PER DRG. NO. FDY-304

"METAL RECOVER BIN FOR ALPUR DEGASSER (DRG.NO.FDY-300)"

"METAL RECOVER BIN FOR ALPUR DEGASSER (DRG.NO.FDY-300)"

ROTOR ASSEMBLY FOR DE-GASSING OF ERMAT FURNACES AS PER OFAJ DRG. NO. FDY-233A.

ROTOR ASSEMBLY FOR DE-GASSING OF ERMAT FURNACES AS PER OFAJ DRG. NO. FDY-233A.

DE-DROSSING BIN ( BIN FOR DROSS HANDLING ) AS PER DRG.NO.FDY-210 B

DE-DROSSING BIN ( BIN FOR DROSS HANDLING ) AS PER DRG.NO.FDY-210 B

FIXING PLATE FOR FRIES MACHINE TO DRG.NO. DCT-76B.

FIXING PLATE FOR FRIES MACHINE TO DRG.NO. DCT-76B.

DEGASSING TOOL (GRAPHITE IMPELLER AND SHAFT-1NO. EACH) AS PER DRAWING NO. DCT-595.

DEGASSING TOOL (GRAPHITE IMPELLER AND SHAFT-1NO. EACH) AS PER DRAWING NO. DCT-595.

SUPPLY OF GRAPHITE ROTOR FOR RGI AS PER DRAWING NO FDY-272/A

SUPPLY OF GRAPHITE ROTOR FOR RGI AS PER DRAWING NO FDY-272/A

DE-DROSSING SPADE FOR ERMAT FURNACE 15TON MELTING & HOLDING FURNACE AS PER DRG. NO.-278B

DE-DROSSING SPADE FOR ERMAT FURNACE 15TON MELTING & HOLDING FURNACE AS PER DRG. NO.-278B

GRAPHITE SHAFT ASSEMBLY FOR RGI AS PER DRG.NO. FDY-271.

GRAPHITE SHAFT ASSEMBLY FOR RGI AS PER DRG.NO. FDY-271.

CASE CANVAS TO DRG NO. MCT-1415

CASE CANVAS TO DRG NO. MCT-1415

DRG NO. MCT-1415

CASE CARRYING AS PER DRG NO. MCT-1764

CASE CARRYING AS PER DRG NO. MCT-1764

DRG NO. MCT-1764

CASE CARRYING TO DRG NO. MCT-2658/1 GUN RULE FIELD GUN CASED 101-A (HIGH ANGLE)

CASE CARRYING TO DRG NO. MCT-2658/1 GUN RULE FIELD GUN CASED 101-A (HIGH ANGLE)

DRG NO. MCT-2658/1

BIN FOR OVERFLOW MATERIAL CFF AS PER DRG. NO. FDY-214B.

BIN FOR OVERFLOW MATERIAL CFF AS PER DRG. NO. FDY-214B.

DAM FOR CFF AS PER DRG. NO. FDY-220 A.

DAM FOR CFF AS PER DRG. NO. FDY-220 A.

FLOW CONTROL DAM FOR CASTING M/C AS PER DRG. NO. FDY-217A.

FLOW CONTROL DAM FOR CASTING M/C AS PER DRG. NO. FDY-217A.

CASE CARRYING TO DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

CASE CARRYING TO DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

CASE CARRYING AS PER DRG NO. MCT-1966/1

CASE CARRYING AS PER DRG NO. MCT-1966/1

DRG NO. MCT-1966/1

STRAP WEBBING ASSY MCT-2965/1 FOR BINOCULAR STAINER 8X30R(HR BINO)

STRAP WEBBING ASSY MCT-2965/1 FOR BINOCULAR STAINER 8X30R(HR BINO)

MCT-2965/1

CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.

CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.

DRG NO. MCT-2964/2

TRANSITION PLATE FOR 400MM DIAMETER TO DRG. NO. FDY-231 A.

TRANSITION PLATE FOR 400MM DIAMETER TO DRG. NO. FDY-231 A.

OVERFLOW DAM FOR WAGSTAFF CASTING MACHINE AS PER DRG.NO.FDY-219A

OVERFLOW DAM FOR WAGSTAFF CASTING MACHINE AS PER DRG.NO.FDY-219A

CASTING RING MC,DG,K 15.935ASI WAGSTAFF PART NO 42004 FOR 400 MM (16 INCH) DIAMETERS

CASTING RING MC,DG,K 15.935ASI WAGSTAFF PART NO 42004 FOR 400 MM (16 INCH) DIAMETERS

400MM DIA MOULD BODY AS PER WAGSTAFF PART NO. 41998.

400MM DIA MOULD BODY AS PER WAGSTAFF PART NO. 41998.

NOZZLE PLATE TO DRG. NO.DC-37A (FOR FRIES DIE CASTING MACHINE).

NOZZLE PLATE TO DRG. NO.DC-37A (FOR FRIES DIE CASTING MACHINE).

DEGASSER TABLET WITH 90% HEXACHLOROETHANE MINIMUM REQUIRED FOR DEGASING OF AL.ALLOY MELTS EACH TABLET WEIGHING 500 GMS.

DEGASSER TABLET WITH 90% HEXACHLOROETHANE MINIMUM REQUIRED FOR DEGASING OF AL.ALLOY MELTS EACH TABLET WEIGHING 500 GMS.

FLUX FOR TREATMENT

FLUX FOR TREATMENT

PYROSLIP THINNER

PYROSLIP THINNER

PYROSLIP 325

PYROSLIP 325

PLUGING CONE FOR ALPUR & CFF AS PER DRG. NO. FDY-229.

PLUGING CONE FOR ALPUR & CFF AS PER DRG. NO. FDY-229.

STOP OF CONE TO DRG.NO. FDY-230 FOR WAGSTAFF CASTING SYSTEM MATERIAL: CERAFOAM.

STOP OF CONE TO DRG.NO. FDY-230 FOR WAGSTAFF CASTING SYSTEM MATERIAL: CERAFOAM.

CERAMIC FIBRE BLANKETS,SIZE -12 MM THICKNESS X 610 MM WIDTH, MINIMUM LENGTH 7 METER,IN ROLL FORM,DENSITY 128 KG/METER CUBE,TEMP. TO WITHSTAND 1260 DEGREE CENTIGRADE,THE QUANTITY TO BE PROCURED WILL BE IN METER

CERAMIC FIBRE BLANKETS,SIZE -12 MM THICKNESS X 610 MM WIDTH, MINIMUM LENGTH 7 METER,IN ROLL FORM,DENSITY 128 KG/METER CUBE,TEMP. TO WITHSTAND 1260 DEGREE CENTIGRADE,THE QUANTITY TO BE PROCURED WILL BE IN METER

COVERAL 88 FLUX FOR DROSS REMOVAL.

COVERAL 88 FLUX FOR DROSS REMOVAL.

CERAL MASTIC-2004M EQUIVALIENT TO INSURAL(R) 80 MASTIC

CERAL MASTIC-2004M EQUIVALIENT TO INSURAL(R) 80 MASTIC

Cumite Brown AP Type Grit-24

Cumite Brown AP Type Grit-24

NA

• As per attachment

• As per attachment

SUPPLY OF ARGON GAS 99.998% PURITY WITH H2O LESS THAN 4 PPM O2 LESS THAN 2 PPM IN QUARDS CONSISTING 40 NOS. OF CYLINDERS OF CAPACITY 7 CU. MTR. EACH.

SUPPLY OF ARGON GAS 99.998% PURITY WITH H2O LESS THAN 4 PPM O2 LESS THAN 2 PPM IN QUARDS CONSISTING 40 NOS. OF CYLINDERS OF CAPACITY 7 CU. MTR. EACH.

WIPER SEAL,SECONDARY 16" MOLD AS PER DRG.NO.FDY-205A.

WIPER SEAL,SECONDARY 16" MOLD AS PER DRG.NO.FDY-205A.

WIPER SEAL,PRIMARY 16" MOLD AS PER DRG.NO.FDY-204 A.

WIPER SEAL,PRIMARY 16" MOLD AS PER DRG.NO.FDY-204 A.

Oval Spring Platform for JVPC, Drg. No. 0204-03-02-0009-002-00DC

Oval Spring Platform for JVPC, Drg. No. 0204-03-02-0009-002-00DC

Drg. No. 0204-03-02-0009-002-00DC

Steek Round dia 6mm to Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

STEEL ROUND dia 18MM TO SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725

Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725

drawing SK-5725

Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003

Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003

Drg. No. 0204-03-02-36-37-002-00DF

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

Sheet 1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

Drg No. 0204-03-02-00-01-001-00DE

1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine

1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine

Drg No. 0204-03-02-00--09-003-00DC

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

M5x20 for 5.56 MM as per IS: 1366

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Drg. No. 0204-03-02-00-09-005-00DC

Plastic Packing Box for 10 JVPC alongwith accessories

Plastic Packing Box for 10 JVPC alongwith accessories

Pin Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-020-00DA

Pin Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-020-00DA

Drg. No. 0204-03-02-02-18-020-00DA

Manufacturing of blank of cocking bracket for JVPC with SAF SK -106 RM St. Rod dia 46 mm rod & length 150 mm 0375003046

Manufacturing of blank of cocking bracket for JVPC with SAF SK-106 RM St. Rod dia 46 mm rod & length 150 mm 0375003046

Drg No.0204-03-02-0001-001-00XD

Magazine Assembly for JVPC, Drg. No. 0204-03-03-00-07-000-00DD

Magazine Assembly for JVPC, Drg. No. 0204-03-03-00-07-000-00DD

Drg. No. 0204-03-03-00-07-000-00DD

Investment Casting Housing Rear Sight for JVPC 5.56 MM, Drg. No. SK-JVPC-598*

Investment Casting Housing Rear Sight for JVPC 5.56 MM, Drg. No. SK-JVPC-598*

Drg. No 0204-03-02-15-28-003-00DC

INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1

INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1

SK-JVPC-598*1

• INVESTMENT CASTING

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Guide Piece Magazine for JVPC , Drg. No. 0204-03-02-18-29-003-00DB

Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB

Drg. No. 0204-03-02-18-29-003-00DB

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I)

CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.

CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

DIEDRESS-MS, TITANIUM OXIDE FILLER BASE DRESSING, THICK LIQUID, INGREDIENTS:I)TIO2:CAS NO.-13463-67-7, OSHA-15 MG PER CU.MTR II)GRAPHITE:CAS NO.-7782-42-5, OSHA-15 PPM, III) NAPHTHALENIC OIL'

DIEDRESS-MS, TITANIUM OXIDE FILLER BASE DRESSING, THICK LIQUID, INGREDIENTS:I) TIO2:CAS NO.-13463-67-7, OSHA-15 MG PER CU.MTR II) GRAPHITE:CAS NO.-7782-42-5, OSHA-15 PPM, III) NAPHTHALENIC OIL'

ARGON GAS 99.998% PURITY WITH H2O LESS THAN 4 PPM, O2 LESS THAN 5 PPM , H2 LESS THAN 2 PPM.

ARGON GAS 99.998% PURITY WITH H2O LESS THAN 4 PPM, O2 LESS THAN 5 PPM , H2 LESS THAN 2 PPM.