TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17

BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17

DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17

BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.

BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.

DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA

BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.

BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.

DS CAT NO. 1005-000573 DC(I) NO. 27019

BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15

BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15

DRG.NO.DS CAT NO.1005- 0 06645

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

COVER FOR PLUG AND SOCKET CONNECTER AS PER DRG No. OLF/STD/149-1

AS PER DRAWING

OLF/STD/149-1

COVER FOR PLUG AND SOCKET CONNECTOR TO DRG NO OLF/STD/149-0

AS PER DRAWING

OLF/STD/149-0

BUSH TO DRG No AF8220894

AS PER DRAWING

AF8220894

BOARD PLASTIC MOULD TO DRG No.AF6672075-12

AS PER DRAWING

AF6672075-12

BOARD ASSY. TO DRG. NO. AF6672075-11

AS PER DRAWING

AF6672075-11

COVER TO DRG No AF7852034

AS PER DRAWING

AF7852034

PLUG TO DRG No.AF6672095

AS PER DRAWING

AF6672095

BOARD TO DRG No.AF5282076

AS PER DRAWING

AF5282076

HOUSING TO DRG NO AF8037024

AS PER DRAWING

AF8037024

• PLASTIC COMPONENT

• PLASTIC COMPONENTS

CAP TO DRG No AF8634303

AS PER DRAWING

AF8634303

NUT TO DRG. NO. AF8937015

AS PER DRAWING

AF8937015

SLEEVE TO DRG No. AF8210099

AS PER DRAWING

AF8210099

FRAME TO DRG NO AF7804036

AS PER DRAWING

AF7804036

BODY TO DRG. NO. AF6675006

AS PER DRAWING

AF6675006

GASKET AS PER DRG No AF7840245

AS PER DRAWING

AF7840245

BUSHING TO DRG. NO. AF7860559

AS PER DRAWING

AF7860559

BODY (HOUSING ELECTRONIC COMP.) TO DRG No.AF8020344

AS PER DRAWING

AF8020344

EYE SHIELD TO DRG. No. AF8647050

AS PER DRAWING

AF8647050

COVER TO DRG NO. AF8057112

AS PER DRAWING

AF8057112

GASKET TO DRG NO AF8683997

AS PER DRAWING

AF8683997

GASKET TO DRG NO. AF8684452

AS PER DRAWING

AF8684452

GASKET TO DRG. No. AF8683647

AS PER DRAWING

AF8683647

INSERT (R.M.) to DRG No. AF8214089

AS PER DRAWING

AF8214089

INSERT TO DRG. No. AF8214167

AS PER DRAWING

AF8214167

BUSHING TO DRG. NO. AF8220575

AS PER DRAWING

AF8220575

RING TO DRG NO AF8683535

AS PER DRAWING

AF8683535

GASKET TO DRG No. AF8684036

AS PER DRAWING

AF8684036

GASKET TO DRG NO AF8683429

AS PER DRAWING

AF8683429

GASKET TO DRG. NO. AF8686574

AS PER DRAWING

AF8686574

BUSHING TO DRG NO AF8220467

AS PER DRAWING

AF8220467

GASKET TO DRG NO AF8685889

AS PER DRAWING

AF8685889

GASKET TO DRG No BL7840289

AS PER DRAWING

BL7840289

CONNECTING BLOCK TO DRG No BL7830926

AS PER DRAWING

BL7830926

COVER TO DRG No BL7852476-09

AS PER DRAWING

BL7852476.09

INSULATOR TO DRG No.BL7890100

AS PER DRAWING

BL7890100

SOCKET TO DRG No. BL6604031

AS PER DRAWING

BL6604031

ECCENTRIC TO DRG No BL6365085

AS PER DRAWING

BL6365085

SPACER TO DRG No

AS PER DRAWING

AL7840945

BODY PLASTIC MOULED TO DRG No BL6675137

AS PER DRAWING

BL6675137

CONNECTING BLOCK TO DRG No BL7830925

AS PER DRAWING

BL7830925

GASKET TO DRG No BL7840171

AS PER DRAWING

BL7840171

BLOCK TO DRG No BL7830195

AS PER DRAWING

BL7830195

BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.

BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.

DS CAT NO. 1005-000332 DC(I)20404-SA

BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.

BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.

DS CAT NO. 1005-000574 DC NO. 25307-SA

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.

BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.

DS CAT NO.5340-007585 DC(I) NO.25384-SA

As Per Drg. DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating

As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating

DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17

BLENDED FABRIC POLYESTER & COTTON (67:33) UNDYED FOR SUPPLY DROPPING PARACHUTES

Specification No. IND/TC/3038 With conditions attached as Appendix 'A'

• As Per Specification/Drawing

• As Per Specification/Drawing

BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15

BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15

DS CAT NO. 1005-006855

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION

BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION

DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02

AS PER DRG

AS PER DRG

BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002

BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002 .

DRG.NO.3602008030

BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,

BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,

DRG NO 23055A,SKM-902*1

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

AS PER DRG.

AS PER DRG.

DS CAT 1005-000441

AS PER DRG DS CAT 1005-006830 DS (I) 25400-SA DT 16-06-02 (WITH SAF MATERIAL IN LF 0145032065 ST FLAT 10X25 MM SPECN BS:970-PT-1:1983 GR 070 MSS A/G BANK GUARANTEE

AS PER DRG DS CAT 1005-006830

BLANK FOR TRAY AS PER DRG.NO.SKM-864

BLANK FOR TRAY AS PER DRG.NO.SKM-864

DRG.NO.SKM-864

BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G

BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G

SKM-902*1

BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).

BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).

DRG. NO. SKM-899 (IC

AS PER DRG.

AS PER DRG.

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT)

ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT)

DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02

WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.

WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.

Drg. No. SK5026

WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM.

WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM.

DRG NO. AKC-01/1

Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets)

Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets)

DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959

USER HAND BOOK OF AMOGH CARBINE 5.56MM.

USER HAND BOOK OF AMOGH CARBINE 5.56MM.

UPPER HAND GUARD ASSEMBLY TO DRG NO.AKC-15 FOR CARBINE 5.56MM IN FINISHED CONDITION.

UPPER HAND GUARD ASSEMBLY TO DRG NO.AKC-15 FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-15

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044

TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM

TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM

DRG NO AKC 01/8

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10

ARDE/TA/94/12

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

• machining & assy.

• As per attached document of manufacturing & testing.

THREE POINT SLING ASSY TO DRG NO.RFI SK-7911 CONSISTING OF 7 ITEMS:LOOP DIVIDER ADJUSTING LENGTH RFI SK-8099,BLACK WEBBING FASTENING DETAIL RFI SK-8100,HOOK ASSYARDE SK-3303/8,HOOK ARDE SK-3303/3,LOCK HOOK ARDE SK-3303/5,SPG HEL.COMP.LOCK HOOK SK-3303/4,PIN AXIS LOCK HOOK SK3303/6

THREE POINT SLING ASSY TO DRG NO.RFI SK-7911 CONSISTING OF 7 ITEMS:LOOP DIVIDER ADJUSTING LENGTH RFI SK-8099,BLACK WEBBING FASTENING DETAIL RFI SK-8100,HOOK ASSYARDE SK-3303/8,HOOK ARDE SK-3303/3,LOCK HOOK ARDE SK-3303/5,SPG HEL.COMP.LOCK HOOK SK-3303/4,PIN AXIS LOCK HOOK SK3303/6

DRG NO.RFI SK-7911

TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM.

TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM.

DRG NO. AKC-09/4

STUD LEVER CHANGE TO DRG NO. AKC-10/1/1* (IN FINISHED CONDITION) FOR AMOGH 5.56MM.

STUD LEVER CHANGE TO DRG NO. AKC-10/1/1* (IN FINISHED CONDITION) FOR AMOGH 5.56MM.

DRG NO. AKC-10/1/1*

STUD COCKING HANDLE TO DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421 .DC(1)26543-SA DT-18.11.10

STUD COCKING HANDLE TO DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421 .DC(1)26543-SA DT-18.11.10

DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421

STUD COCKING HANDLE TO DRG NO.AKC-08/10 FOR CARBINE 5.56MM IN FINISHED CONDITION.

STUD COCKING HANDLE TO DRG NO.AKC-08/10 FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-08/10