PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99

PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99

DRG NO.PH-3-3

PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.

PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.

D S CAT NO-5315-009114

PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009

PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009

DRG NO.PH-1-9

PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99

PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99

PH-10-2

PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.

PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.

D S CAT NO -5315-002012

PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.

PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.

D S CAT NO-5315-002013

PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16

PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16

D S CAT NO-5315-009110

PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.

PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.

D S CAT NO -5315-002019

PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.

PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.

D S CAT NO-1005-000877

PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.

PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.

DRG NO PHMK-III-1-2

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04

MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000

MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000

D S CAT NO- 1005-000874

MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08

MAIN SPRING SWIVEL IN FINISHED CONDITION REQUIRED FOR REVOLV ER MK-III DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08

DRG NO PHMK-III-1-21 D.A. NO. 65/08 DT. 27-09-08

MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III

MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III

DRG NO PHMK-III-1-10

Investment Casting to DRG No. SK-3713*1 for Guard Back Sight

Investment Casting to DRG No. SK-3713*1 for Guard Back Sight

DRG No. SK-3713*1

GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 93-8/1 COLOUR BLACK AS PER OUR DRG. &SPECN.

GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 93-8/1 COLOUR BLACK AS PER OUR DRG. &SPECN.

DS CAT NO.1005-000898

LENS ASSEMBLY LF 2690000025

DRG. NO. AF5938193

LENS FINISHED LF 7420400016

DRG. NO. BSH7538010

• FIRM SHOULD SUBMIT DETAILS OF MANUFACTURING FACILITIES FOR SUBJECT ITEM

• FIRM SHOULD SUBMIT DETAILS OF TESTING/INSPECTION FACILITIES FOR SUBJECT ITEM

STICK-ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 00 51 00 00 002 OODA FOR POD (FILLED) UNHD 1.1 E.

STICK-ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 00 51 00 00 002 OODA FOR POD (FILLED) UNHD 1.1 E.

DRAWING NO.8603 00 51 00 00 002 OODA

STICK- ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 02 04 0000 002 00DA FOR FUZE & ACCESSORIES PACKING BOX UNHD 1.1 B.

STICK- ON EXPLOSIVE LABEL TO ARDE DRAWING NO.8603 02 04 0000 002 00DA FOR FUZE & ACCESSORIES PACKING BOX UNHD 1.1 B.

DRG NO.8603 02 04 0000 002 00DA

ROPE MANILA HAWSER-LAID ( 3 STRANDS ) GRADE-1 SIZE 12 MM DIATO IS: 1084 -1994 (FOURTH REVISION) REAFFIRMED-1999(AMDT-1) UN-TARRED / ROT PROOFED

IS: 1084 -1994

PAPER WHITE FINE AMMUNITION TO SPECN. JSS 9310-06 : 2002 DC NO. 3738-ME DT. 17- 09- 2002. SIZE - 762 MM X 508 MM X 0.051 MM +/-0.005 MM THICK SUBSTANCE 42 TO 46 GSM

JSS 9310-06: 2002

PAPER LAMINATED GRADE II, SIZE 914 MM WIDE X 0.45 TO 0.53 MMTHICK IN ROLLS TO SPECN. IND/ME/786(D):2013 DC NO.5261-ME (WEIGHT OF EACH BUNDLE TO BE RESTRICTED LESS THAN OR EQUAL TO 250 KGS ONLY)

IND/ME/786(D):2013 DC

• Paper Manufacturing Plant Rolling Machine Cutting /Sizing facility

• Mechanical testing facility ( Bursting Strength, Breaking Load, Stretch % Resistance to water penetration , Delamination in water, Delamination at high temperature and humidity)
• Chemical Testing Facility ( Moisture content, PH of water extract, Water soluble chloride, Water soluble sulphate, Fatty acids, Ash content %, Alkanity )
• GSM testing facility

PAPER FOR BASE WADS, FOR PAPER CARTRIDGE CASES TO SPECN.NO. JSS 9310- 03: 2010 DC NO. 5023- ME, SIZE 61 TO 91 CM WIDE 0.34 TO 0.40 MM THICK, IN ROLLS OF 450 TO 600 MM DIA.

JSS 9310- 03: 2010

MILL BOARD (CUPPING QUALITY) SPECN. JSS 9310 - 01 : 2007 (REV. NO. 2) DC 3948-ME DT.04.04.2009, SIZE- 787 MM X 600 MM X 4.50 MM THICK + 0.40 MM

JSS 9310 - 01 : 2007

MILL BOARD SIZE- 787 MM X 559 MM X 3 MM THICK TO SPECN.NO. JSS 9310-01:2007 DC 3948-ME DT.04-04-2009 (REVISION NO.2)

JSS 9310-01:2007

MILL BOARD TO SPECN. JSS 9310-01:2007, DC 3948-ME, DT.04.04. 2009 (REV.NO.2), SIZE: 787 MM X 559 MM X 6.30MM +/- 0.95 MM THICK, MASS 6700 +/- 1000 GSM

JSS 9310-01:2007

MILL BOARD TO SPECN. JSS 9310-01: 2007 DC 3948-ME DT.04.04.2009 (REV.NO.2) SIZE: 787MM X 559MM X 3.25MM + -0.48MM THICK MASS 3350 + - 500 GSM (FOR GENERAL PURPOSE

JSS 9310-01: 2007

MILL BOARD TO SPECN. JSS 9310-01:2007, DC-3948-ME, DT.04.04. 2009 (REV.NO.2), SIZE 787 MM X 559 MM X 2.50 MM + -0.35 MM THICK MASS 2675 + - 400 GSM (CUPPING QUALITY IS MUST)

JSS 9310-01:2007

MILL BOARD TO SPECN.JSS 9310-01: 2007, DC 3948-ME, DT.04.04. 2009 (REV.NO.2), SIZE 787 X 559 X 2.50 MM +/- 0.35 MM THICK MASS 2675 +/- 400 GSM.

JSS 9310-01: 2007

MILL BOARD TO SPECN. JSS 9310-01: 2007,DC 3948-ME, DT.04.04.2009.(REV.NO.2),SIZE 787MM X 559MM X 1.50MM +- 0.21MM THICK MASS- 1500 + - 250 GSM

JSS 9310-01: 2007

MILL BOARD TO SPECN. JSS 9310-01:2007,(REV.NO.2),DC 3948-ME DT.04.04.2009,SIZE 787 MM X 559 MM X 1.25 MM + -0.18MM THICK MASS 1450 + -220 GSM

JSS 9310-01: 2007

MILL BOARD TO SPECN. JSS 9310-01:2007 DC 3948-ME DT.04.04.09 (REVISION NO.2) SIZE - 787 MM X 559 MM X 0.50 MM + -0.07 MM THICK MASS- 575 +/-85 GSM

JSS 9310-01:2007

LABEL-II (FOR POD CONTAINING RHE ROCKET) TO DRG.NO.8603 00 51 00 00 001 12 PA AND DRG.NO.8603 00 51 00 00 001 22 PA (FOR DIMENSION PURPOSE).

LABEL-II (FOR POD CONTAINING RHE ROCKET) TO DRG.NO.8603 00 51 00 00 001 12 PA AND DRG.NO.8603 00 51 00 00 001 22 PA (FOR DIMENSION PURPOSE).

DRG.NO.8603 00 51 00 00 001 12 PA AND DRG.NO.8603 00 51 00 00 001 22 P (FOR DIMENSION PURPOSE

LABEL-II (FOR POD CONTAINING PF ROCKET) TO DRG. NO.8603 00 52 00 00 001 12 PA AND DRG. NO. 8603 00 52 00 00 001 22 PA (FOR DIMENSION PURPOSE)

LABEL-II (FOR POD CONTAINING PF ROCKET) TO DRG. NO.8603 00 52 00 00 001 12 PA AND DRG. NO. 8603 00 52 00 00 001 22 PA (FOR DIMENSION PURPOSE)

DRG. NO.8603 00 52 00 00 001 12 PA AND DRG. NO. 8603 00 52 00 00 001 22 PA (FOR DIMENSION PURPOSE

LABEL(STICKER) TO DES.REF.CQA(A)/LABEL/1053,SPECN. NO.CQA(A) 2201,FOR FIXING ON CONTAINER 38 B,FOR PACKING FUZE B 429E.

CQA(A) 2201,FOR FIXING ON CONTAINER 38 B,FOR PACKING FUZE B 429E.

STICKER LABEL DRG. NO. SK- 1473 DT. 15/10/84.

STICKER LABEL DRG. NO. SK- 1473 DT. 15/10/84.

DRG. NO. SK- 1473 DT. 15/10/84.

EXPLOSIVE GROUP LABEL IA - 1001 (1.2D)

EXPLOSIVE GROUP LABEL IA - 1001 (1.2D)

LABEL IA - 1001

BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS-8135-13:2007 (REVISION NO.2) DC 3908-ME, SIZE: 630 MM X 420 MM X 2.00 MM +/-0.1 MM THICK SUBSTANCE 2250 +/-225 GSM.

JSS-8135-13:2007

BOARD GLAZED CALENDERED AMMUNITION TO SPECN. JSS 8135-13:2007 (REV.NO.2) DC NO.3908-ME DT.21-07-2008, SIZE-700 MM X 525 MM X 0.635 MM +- 0.064 MM THICK MASS 703 +- 70 GSM. (CUPPING QUALITY IS MUST).

JSS 8135-13:2007

ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32MM TH 1NO/SET.(D)PKG.S.XI DET.NO.1 SZ-410MM X165MM X25MM T.1NO/SET

ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32MM TH 1NO/SET.(D)PKG.S.XI DET.NO.1 SZ-410MM X165MM X25MM T.1NO/SET

CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET IV HEMRL/ED/DRG.NO.002 DET.NO.1 SZ -470MM X180MM X10MM TH.4NOS/SET (B)PKG.SHEET V DET.NO.2 SZ-170MM X160MM X20MM TH 2NOS/SET. (C)PKG.SHEET VI DET.NO.3 SZ-135MM X160MM X40MM TH. 1NO/SET(D)PKG.S.VII DET.NO.4 SZ-410MM X160MM X25MM T.1NO/SET

CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET IV HEMRL/ED/DRG.NO.002 DET.NO.1 SZ -470MM X180MM X10MM TH.4NOS/SET (B)PKG.SHEET V DET.NO.2 SZ-170MM X160MM X20MM TH 2NOS/SET. (C)PKG.SHEET VI DET.NO.3 SZ-135MM X160MM X40MM TH. 1NO/SET(D)PKG.S.VII DET.NO.4 SZ-410MM X160MM X25MM T.1NO/SET

CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 235 MM X 140MM X12MM THK.27 NOS/SET.

CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 235 MM X 140MM X12MM THK.27 NOS/SET.

CONTAINER ASSEMBLY FOR 120 MM FSAPDS AS PER ARDE DES. REF.NO. ARDE- 9759 DET. NO. 5 SHTS 2.

CONTAINER ASSEMBLY FOR 120 MM FSAPDS AS PER ARDE DES. REF.NO. ARDE- 9759 DET. NO. 5 SHTS 2.

DES. REF. NO. ARDE- 9759 DET. NO. 5 SHTS 2.

AMMN. CONTAINER 66A DRAWING PART NUMBER ISV 518-A DC NO.34513-A DT. 31/12/1988. SPECN. NO. CQA(A) 2805 (H) DC NO. 36145-A .

CQA(A) 2805 (H)

DRAWING PART NUMBER ISV 518-A

BOARD GLAZED CALENDERED AMMUNITION, SIZE: 700 MM X 525 MM X 3.048 MM +/- 0.305 MM THICK, SUBSTANCE - 3420 +/- 342 GSM TO SPECN. NO. JSS 8135-13:2007 (REV.NO.2) DC NO. 3908-ME, DT. 21.07.2008 (CUPPING QUALITY IS MUST).

JSS 8135-13:2007

SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.

SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.

DRG.PART NO.ISV-1122

RING (VULCANISED NATURAL RUBBER COMPATIBLE WITH EXPLOSIVES) TO DRG.PT.NO. QX 1492 DC 36123-A SPECN:IND/ME/728 DC(I)3754-ME COMPOUND DESIGNATION Z 12-C

IND/ME/728

DRG.PT.NO. QX 1492

NYLON RING TO DRG.PART NO. ISX 426 DC NO. 36342-A FOR SHELL, 130 MM, HE, 1B PLUGGED FILLED ASSY.

NYLON RING TO DRG.PART NO. ISX 426 DC NO. 36342-A FOR SHELL, 130 MM, HE, 1B PLUGGED FILLED ASSY.

DRG.PART NO. ISX 426

NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97.

NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97.

DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50

SEALING PLUG (RUBBER) TO DRG.NO. ARDE-1135 DET.NO. 2 AL.NO. 21/94 DT. 12-10-1994 FOR ROCKET 68 MM HE/HC/PRACTICE.

SEALING PLUG (RUBBER) TO DRG.NO. ARDE-1135 DET.NO. 2 AL.NO. 21/94 DT. 12-10-1994 FOR ROCKET 68 MM HE/HC/PRACTICE.

DRG.NO. ARDE-1135

PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A.

PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A.

DRG PART NO.ITV 95

MINE APERS, M-14 WITH FUZE INTEGRAL (EMPTY) DRG. PT. NO. ITX 17 GE DC NO. 36756-A DT.26.4.2001 SPECN. NO. CQA (A) 1837 DC NO. 36756-A DT.26.4.2001.

CQA (A) 1837

DRG. PT. NO. ITX 17 GE

LINER,MATL:CELLULOID TO DRAWING NUMBER IQX-848,DC 36785-A DATED 08/10/2001 FOR PRIMER 19B.

LINER,MATL:CELLULOID TO DRAWING NUMBER IQX-848,DC 36785-A DATED 08/10/2001 FOR PRIMER 19B.

DRAWING NUMBER IQX-848

HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A

HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A

HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A

HALF CUP TO DRG.PART NO.ISV 1740 DC 36454-A,MAT.:POLYSTYRENE MOULDING PLASTIC AMMUNITION (O.G.COLOUR) TYPE'B' TO SPECN.JSS 9330-01.

JSS 9330-01.

DRG.PART NO.ISV 1740

WOOL FELT PRESSED GENERAL PURPOSE MEDIUM WHITE SIZE: 1320 MM WIDE X 10 MM THICK SPECN: IS:1719- 2000 (FOURTH REV.)PROOFED WITH DINITRO-ALPHANAPHTHOL MIN 0.25% & MAX 0.50% .

IS:1719- 2000

WOOL FELT PRESSED MEDIUM WHITE PROOFED GENERAL PURPOSE SIZE:1320 MM WIDE X 6.3 MM THICK CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENT TO SPECN. IS: 1719-2000 (FOURTH REV.) PROOFED WITH 0.25% TO 0.50 % OF DINITRO ALPHA NAPHTHOL .

IS: 1719-2000

PRESSED WOOL FELT GENERAL PURPOSE TYPE SOFT PROOFED SIZE1320 MM WIDE X 3 MM THICK COLOUR WHITE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO SPECN.IS:1719-2000 (FOURTH REV.) PROOFED WITH 0.25 TO 0.50% DINITRO-ALPHANAPHTHOL.

IS:1719-2000

EXPANDED POLYSTYRENE FOAM (THERMOCOLE) AVERAGE DENSITY 18 TO 25 KG/M3 TO SPECN. IS: 4671 - 1984 (FIRST REVISION) R.A-1999 SIZE - 1000 MM X 500 MM X 12 MM THICKNESS.

IS: 4671 - 1984

EXPANDED POLYSTYRENE FOAM,SIZE: 1000MM X 500MM X 20 MM THICK AVERAGE DENSITY 18 TO 25 KG/M3 SPECN. IS: 4671- 1984 (FIRSTREVISION ) R.A - 1999

IS: 4671- 1984

EXPANDED POLYSTYRENE FOAM (THERMOCOLE) AVERAGE DENSITY 18 TO 25 KG/M3 SIZE: 1000 MM X 500 MMX 6 MM THICK. SPECN. IS:4671-1984. (FIRST REVISION) REAFFIRMED 1999.

IS:4671 - 1984.

NYLON CORD IN NATURAL COLOUR ( BRAIDED MULTI-WEAVE TYPE OR PLAIN TWISTED TYPE ) SPECN: JSS

JSS-4020-06: 2006

CONTAINER 38 B TO DES.REF.CIA/AMN/2008, DRG.PT.NO.ISV 464-A DC 36787-A,SPECN.NO.CQA(A) 2804(M) DC 36202-A,CONST.-(1)BODY DRG.PT.NO.ISV-1557 DC 36177-A (2)LID DRG.PT.NO.ISV-1558 DC 36177-A (3) RING-A DRG.NO.ISV-1559 DC 35710-A (4)DISC PT.NO. ISV-2017 & (5) DISC PT.NO.ISV-2018.

CQA(A) 2804(M)

DRG.PT.NO.ISV 464-A DC 36787-A, DC 36202 A, CONST.- (1) BODY DRG. PT. NO. ISV-1557 DC 36177-A (2) LID DRG.PT.NO.ISV-1558 DC 36177-A (3) RING-A DRG.NO. ISV-1559 DC 35710-A (4) DISC PT.NO. ISV-2017 & (5) DISC PT.NO.ISV-2018.

CHLORINATED RUBBER TO SPECIFICATION IND/ME/513 DC NO 3754-MDATED 12/12/2002.

IND/ME/513

CASING IN TWO HALVES (MODIFIED) FOR 120MM ARJUN

CASING IN TWO HALVES (MODIFIED) FOR 120MM ARJUN

CASEIN FOR AMMUNITION TO SPECIFICATION NO.JSS 6810-50:2007 DC-4038-ME DT.08.01.2010,(REVISION NO.2).

JSS 6810-50:2007,

BRAKE RING (SMALL) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 001 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011

BRAKE RING (SMALL) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 001 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011

DRG. NO. 8603 03 99 00 00 001 00DA & QAP NO.ARDE/PINAKA/PNWH/QAP/011

BRAKE RING (BIG) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011

BRAKE RING (BIG) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011

DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/ QAP/011

PVC PLASTIC BAND (WHITE) SIZE -25 MM WIDE X 1MM THICK +- 0.1 MM

PVC PLASTIC BAND (WHITE) SIZE - 25 MM WIDE X 0.5 MM THICK +-0.1 MM SPECN. IS: 9766 -1992 (FIRST REV.) CLASS I, TYPE 'A', MATERIAL FLEXIBLE PVC COMPOUND CONFIRMING TO ABOVE SPECIFICTION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

DS CAT NO.1005-000720 (3 SHEETS)

• Optical Manufacturing technology

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing

KNOB BARREL LOCKING CATCH IN FINISHED CONDITION. TO DS CAT NO.1005-000529 DC(I)NO.25307-SA DT.26-03-02.

KNOB BARREL LOCKING CATCH IN FINISHED CONDITION. TO DS CAT NO.1005-000529 DC(I)NO.25307-SA DT.26-03-02.

DS CAT NO.1005-000529 DC(I)NO.25307-SA DT.26-03-02.

• MACHINING

• AS PER DRAWING

INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE

INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE

INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE

INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM

AS PER DRG.

SKM-775*1

PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2

PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2

DRAWING NUMBER 9759,DETL NO.3SHEET NO.

TIMBER NON-CONIFEROUS, SIZE 60 MM X 130 MM X 1.25M TO 1.28MAS PER SPECN. NO. IND/ME/883 (F)(PROV) DC NO. 3754-ME DT. 12-12-2002.

IND/ME/883 (F) (PROV)

TIMBER NON-CONIFEROUS,SIZE 280MM X 16MM X 2.25M TO 2.28M AS PER SPECN.NO.IND/ME/883(F)(PROV) DC 3754-ME DT.12-12-2002.

IND/ME/883(F)(PROV)

TIMBER NON-CONIFEROUS, SIZE 195 MM X 30 MM X 2.00M TO 2.03M AS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO. 3754-ME DT. 12-12-2002.

IND/ME/883(F) (PROV)

TIMBER NON-CONIFEROUS, SIZE 195 MM X 12 MM X 1.35M TO 1.40M AS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO. 3754-ME DT. 12-12-2002

IND/ME/883(F)(PROV)

TIMBER NON-CONIFEROUS, SIZE 155 MM X 19 MM X 1.25M TO 1.37M AS PER SPECN. NO. IND/ME/883 (F)(PROV), DC NO.3754-ME DT. 12-12-2002.

IND/ME/883(F)(PROV)