BUSHING TO DRG. NO. AF8220575

AS PER DRAWING

AF8220575

RING TO DRG NO AF8683535

AS PER DRAWING

AF8683535

GASKET TO DRG No. AF8684036

AS PER DRAWING

AF8684036

GASKET TO DRG NO AF8683429

AS PER DRAWING

AF8683429

GASKET TO DRG. NO. AF8686574

AS PER DRAWING

AF8686574

BUSHING TO DRG NO AF8220467

AS PER DRAWING

AF8220467

GASKET TO DRG NO AF8685889

AS PER DRAWING

AF8685889

GASKET TO DRG No BL7840289

AS PER DRAWING

BL7840289

CONNECTING BLOCK TO DRG No BL7830926

AS PER DRAWING

BL7830926

COVER TO DRG No BL7852476-09

AS PER DRAWING

BL7852476.09

INSULATOR TO DRG No.BL7890100

AS PER DRAWING

BL7890100

SOCKET TO DRG No. BL6604031

AS PER DRAWING

BL6604031

ECCENTRIC TO DRG No BL6365085

AS PER DRAWING

BL6365085

SPACER TO DRG No

AS PER DRAWING

AL7840945

BODY PLASTIC MOULED TO DRG No BL6675137

AS PER DRAWING

BL6675137

CONNECTING BLOCK TO DRG No BL7830925

AS PER DRAWING

BL7830925

GASKET TO DRG No BL7840171

AS PER DRAWING

BL7840171

BLOCK TO DRG No BL7830195

AS PER DRAWING

BL7830195

BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.

BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.

DS CAT NO. 1005-000332 DC(I)20404-SA

BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.

BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.

DS CAT NO. 1005-000574 DC NO. 25307-SA

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.

BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.

DS CAT NO.5340-007585 DC(I) NO.25384-SA

As Per Drg. DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating

As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating

DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17

BLENDED FABRIC POLYESTER & COTTON (67:33) UNDYED FOR SUPPLY DROPPING PARACHUTES

Specification No. IND/TC/3038 With conditions attached as Appendix 'A'

• As Per Specification/Drawing

• As Per Specification/Drawing

BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15

BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15

DS CAT NO. 1005-006855

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION

BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION

DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02

AS PER DRG

AS PER DRG

BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002

BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002 .

DRG.NO.3602008030

BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,

BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,

DRG NO 23055A,SKM-902*1

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

AS PER DRG.

AS PER DRG.

DS CAT 1005-000441

AS PER DRG DS CAT 1005-006830 DS (I) 25400-SA DT 16-06-02 (WITH SAF MATERIAL IN LF 0145032065 ST FLAT 10X25 MM SPECN BS:970-PT-1:1983 GR 070 MSS A/G BANK GUARANTEE

AS PER DRG DS CAT 1005-006830

BLANK FOR TRAY AS PER DRG.NO.SKM-864

BLANK FOR TRAY AS PER DRG.NO.SKM-864

DRG.NO.SKM-864

BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G

BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G

SKM-902*1

BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).

BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G).

DRG. NO. SKM-899 (IC

AS PER DRG.

AS PER DRG.

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT)

ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT)

DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02

WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.

WOODEN CHEST FOR LMG 5.56MM (DP).TO DRG NO-SK-5026.

Drg. No. SK5026

WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM.

WHEEL LOCK TO DRG NO. AKC-01/1 (IN FINISHED CONDITION)FOR AMOGH 5.56MM.

DRG NO. AKC-01/1

Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets)

Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets)

DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959

USER HAND BOOK OF AMOGH CARBINE 5.56MM.

USER HAND BOOK OF AMOGH CARBINE 5.56MM.

UPPER HAND GUARD ASSEMBLY TO DRG NO.AKC-15 FOR CARBINE 5.56MM IN FINISHED CONDITION.

UPPER HAND GUARD ASSEMBLY TO DRG NO.AKC-15 FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-15

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

TRIGGER TO DRG. NO. CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044 DC(I) NO. 26554-SA DT- 30.11.10,

CQA(SA) SK- 454/1/1DS CAT NO. 1005-560044

TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM

TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM

DRG NO AKC 01/8

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405 DC(1) 26519-SA,DT.08-07-10

ARDE/TA/94/12

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

• machining & assy.

• As per attached document of manufacturing & testing.

THREE POINT SLING ASSY TO DRG NO.RFI SK-7911 CONSISTING OF 7 ITEMS:LOOP DIVIDER ADJUSTING LENGTH RFI SK-8099,BLACK WEBBING FASTENING DETAIL RFI SK-8100,HOOK ASSYARDE SK-3303/8,HOOK ARDE SK-3303/3,LOCK HOOK ARDE SK-3303/5,SPG HEL.COMP.LOCK HOOK SK-3303/4,PIN AXIS LOCK HOOK SK3303/6

THREE POINT SLING ASSY TO DRG NO.RFI SK-7911 CONSISTING OF 7 ITEMS:LOOP DIVIDER ADJUSTING LENGTH RFI SK-8099,BLACK WEBBING FASTENING DETAIL RFI SK-8100,HOOK ASSYARDE SK-3303/8,HOOK ARDE SK-3303/3,LOCK HOOK ARDE SK-3303/5,SPG HEL.COMP.LOCK HOOK SK-3303/4,PIN AXIS LOCK HOOK SK3303/6

DRG NO.RFI SK-7911

TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM.

TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM.

DRG NO. AKC-09/4

STUD LEVER CHANGE TO DRG NO. AKC-10/1/1* (IN FINISHED CONDITION) FOR AMOGH 5.56MM.

STUD LEVER CHANGE TO DRG NO. AKC-10/1/1* (IN FINISHED CONDITION) FOR AMOGH 5.56MM.

DRG NO. AKC-10/1/1*

STUD COCKING HANDLE TO DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421 .DC(1)26543-SA DT-18.11.10

STUD COCKING HANDLE TO DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421 .DC(1)26543-SA DT-18.11.10

DRG. NO.ARDE/SK-3143/35. DS CAT NO-5307-004421

STUD COCKING HANDLE TO DRG NO.AKC-08/10 FOR CARBINE 5.56MM IN FINISHED CONDITION.

STUD COCKING HANDLE TO DRG NO.AKC-08/10 FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-08/10

STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM.

STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM.

DRG NO. AKC-09/5*

STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH

SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25.

• As per attachment

• As per attachment

STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).

STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).

STEEL ROUND 20MM DIA TO SPECN.BS:970:PT.1:1983 GD.080M40 IN HOT ROLLED &NORMALISED CONDITION. TEST PIECE TO BE TESTED AS PER THE SPECIFICATION.

STEEL ROUND 20MM DIA TO SPECN.BS:970:PT.1:1983 GD.080M40 IN HOT ROLLED &NORMALISED CONDITION. TEST PIECE TO BE TESTED AS PER THE SPECIFICATION.

STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.

STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MMTO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MMTO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17

STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17

DRG.NO.MS-331*1

• As per attached

• As per attached.

STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).

STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).

DRG. NO. SK-5092*2

STEEL BLANK FOR STUD CHANGE LEVER TO DRG.NO-RFI SK-7017-S* D.A.NO.08/17

STEEL BLANK FOR STUD CHANGE LEVER TO DRG.NO-RFI SK-7017-S* D.A.NO.08/17

DRG.NO-RFI SK-7017-S* D.A.NO.08/17

• machining & assy.

• as per attached document

STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273.

STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273.

DRG.NO-SK-5273.

STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.

STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.

DRG NO-SK-5143*.

• Machining & assy.

• as per attached document

ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.

ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.

ST.RD.22MM DIA IN HOT ROLLED & ANNEALED CONDITION TO SPECN IS:6527:1995,DESIGNATION X30CR 13 (FOR PLUG GAS).

ST.RD.22MM DIA IN HOT ROLLED & ANNEALED CONDITION TO SPECN IS:6527:1995,DESIGNATION X30CR 13 (FOR PLUG GAS).

ST.RD.22MM DIA IN HOT ROLLED & ANNEALED CONDITION TO SPECN IS:6527:1995,DESIGNATION X30CR 13 (FOR PLUG GAS).

ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).

ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).

ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).

ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).

SPECIFICATION IS:513-(LATEST ISSUE).

ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82

ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82

SPRING TORSIONAL SEAR AUTO DRG AKC 01/24 FOR CARBINE 5.56MM IN FINISHED CONDITION.

SPRING TORSIONAL SEAR AUTO DRG AKC 01/24 FOR CARBINE 5.56MM IN FINISHED CONDITION.

AKC 01/24

SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2

SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2

SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2

SPRING RECOIL TO DRG NO.AKC-09/6* FOR CARBINE 5.56MM IN FINISHED CONDITION.

SPRING RECOIL TO DRG NO.AKC-09/6* FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-09/6*

SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16

SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16

DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109

SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16.

SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16.

DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121

SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10

SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10

DRG.ARDE SK-2689/86 DS CAT NO. 5360-007212

SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10

SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10

DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114

SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

• As per attachment

• As per attachment

SPRING DOWEL SLEEVE (HEAVY),DIA 2X7 IS:5988

SPRING DOWEL SLEEVE (HEAVY),DIA 2X7 IS:5988

SPRING DOWEL SLEEVE (HEAVY),DIA 2X7 IS:5988

SPRING CARRYING HANDLE LMG 5.56 DS CAT NO.5360-026792 DC(I) NO. 26563-SA, DT.21.01.11

SPRING CARRYING HANDLE LMG 5.56 DS CAT NO.5360-026792 DC(I) NO. 26563-SA, DT.21.01.11

DS CAT NO.5360-026792

SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION.

SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION.

DS CAT NO. 5365-010491