PAINT RFU AMMUNITION FINISHING AIR DRYING MATT FINISH SPRAY ING FOR GENERAL PURPOSE LIGHT GREY ISC 631 OF IS-5:1994(FOUR TH REVISION)(AMDT.1)TO SPECIFICATION IS-168:1993(THIRD REVISION) APPLICABLE FOR DEFENCE USE.

IS-168:1993

PAINT READY MIXED AIR DRYING SEMI GLOSSY FINISH LIGHT BRUNSWICK GREEN FOR GENERAL PURPOSE ISC 225 OF IS-5-1994 (FOURTH REVISION) ( AMENDMENT NO.1) TO SPECN IS: 168-1993 (THIRD REVISION) (R.A-2002) MODE OF APPLICATION : BRUSHING (AS APPLICABLE FOR DEFENCE USE)

IS: 168-1993

PAINT READYMIXED MARKING FOR PACKAGES AND PETROL CONTAINERS FINISH GOLDEN YELLOW ISC-356 OF IS-5-94 TO SPECN.IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEF.USE.MODE OF APPLICATION STENCILLING (PACKED IN 4 LIT. TIN) SPECIAL REQUIREMENTS WITH GLOSS VALUE 31 TO 50 AT 45 DEG. CEL.

IS-138-1992

PAINT READY MIXED AIR DRYING SEMI-GLOSSY FINISH BLACK FOR GENERAL PURPOSE TO SPECN IS:168-1993 (THIRD REV.) (RA-2002) AS APPLICABLE FOR DEFENCE USE. MODE OF APPLICATION- BRUSHING

IS:168-1993

OKS SUPER 420 HIGH-PRESSURE, MULTI-PURPOSE GREASE.

OKS SUPER 420 HIGH-PRESSURE, MULTI-PURPOSE GREASE.

NORMAL BUTYL ALCOHOL (TECH)TO SPECIFICATION IS: 361-1973, (WITH AMENDMENT-2)(2ND REV.) (REAFFIRMED-1996).

IS: 361-1973

NITRO CELLULOSE MASTIC TO SPECIFICATION NO. GOST B 84-75-75 .

GOST B 84-75-75 .

NITRIC ACID 53% TO 57% (TECH) TO SPECIFICATION NO.IS-264-1976 (SECOND REVISION WITH AMENDMENT NO.2) REAFFIRMED 1995. NOTE: IT IS SUPPLIED IN POLYETHYLENE CONTAINERS FITTED WITH TIGHT TEFLON WASHER (THICKNESS 0.02MM) & STOPPERED WITH HDPE. & WEIGHT OF FILLED CONTAINER SHOULD NOT BE MORE THAN 20 KG

IS-264-1976

SILICONE 17 COMPOUND (SILICONE GREASE).SPECN.IND/ME/989 (PROV) LATEST ISSUE

IND/ME/989 (PROV)

• AS PER SPECN.IND/ME/989 (PROV)

• AS PER SPECN.IND/ME/989 (PROV)

LACQUER: CLEAR NITROCELLULOSE TO SPECIFICATION JSS-8010-42 : 1999 DC NO.3864- ME DT. 01-08-2005.

JSS-8010-42 : 1999

HARDNER FOR EPOXY BASED SEALANT TO SPECIFICATION NO.IND/ME/ 924(PROV) DC NO.3067-ME DT.29/12/93 (ARALDITE HV 953U/LAPOX K-31). (TO BE SUPPLIED IN 800 GRAMS PACKING).

IND/ME/924 (PROV)

HARDNER 758 FOR CEMENT DOBECKOT.

HARDNER 758 FOR CEMENT DOBECKOT.

GUN POWDER SFG-20, SPECN. NO. JSS-1376-05: 2005,(REV. NO.2) DC NO. 3935-ME DATED 04.04.2009.

JSS-1376-05: 2005

GUN POWDER MEALED, SPECN.NO. JSS 1376-05-2005,(REV. NO.2) DC NO. 3935-ME DT.04.04.2009.

JSS 1376-05-2005

GUN POWDER G-7, SPECN. NO. JSS 1376-05: 2005, REVISION NO.2 DC NO.3935-ME DT.04.04.2009.

JSS 1376-05: 2005

GUN POWDER G-40,SPECN : JSS 1376-05:2005, REVISION NO.2 DC NO. 3935-ME DATED 04/04/2009

JSS 1376-05:2005

GUN POWDER G-20, SPECN. NO. JSS-1376-05-2005,REVISION NO.2DC NO. 3935-ME, DT.04.04.2009.

JSS-1376-05-2005

GUN POWDER G-12, SPECN. NO. JSS 1376-05: 2005, REVISION NO.2 DC NO.3935-ME DT.04.04.2009

JSS 1376-05: 2005

GRAPHITE DRY SULPHUR FREE,SIZE 90 MICROMETRE IS SIEVE (99 % MINIMUM) TO SPECIFICATION NO.JSS 9620-01:2010(REVISION.NO.2) DC-5012-ME.

JSS 962001:2010

PHENOL POLYVINYL ACETAL GLUES GR.BF-4 TO SPECIFICATION NO. GOST 12172-74 .

GOST 12172-74 .

GARDACID MZ FOR PINAKA ROCKET

GARDACID MZ FOR PINAKA ROCKET

EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET

EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET

RESIN FOR EPOXY BASED SEALANT TO SPECIFICATION NO.IND/ME/924 (PROV.); DC NO. 3067-ME DT.29/12/93. ( ARALDITE AW 106/ LAPOX A-31) (TO BE SUPPLIED IN 1 KG NET WEIGHT PACKING).

IND/ME/924 (PROV.);

EPOXY BASED SEALANT (RESIN & HARDNER) PIDILITE IND.LTD. MAKE (FIVITITE) NET WEIGHT 1.8 KG (1 KG OF RESIN & 0.8 KG OF HARDNER).

IND/ME/924(PROV)

DYE, RHODAMINE 'B' BASE, DERIVED FROM COLOUR INDEX NO.749 (COLOUR-RED) TO SPECIFICATION NO. JSS 6820-03: 2009 (REV.NO. 2) DC NO. 4047-ME DT. 08/01/2010.

JSS 6820-03: 2009

DISPERSANT, AROMATIC SULPHONIC ACID (BELLOID TD ACID) CONDENSA TE, ANIONIC,COLLOID PROTECTIVE (COMPATIBLE WITH ALL NON-IONIC AND ANIONIC ACTIVE COMPOUNDS).

DISPERSANT, AROMATIC SULPHONIC ACID (BELLOID TD ACID) CONDENSA TE, ANIONIC,COLLOID PROTECTIVE (COMPATIBLE WITH ALL NON-IONIC AND ANIONIC ACTIVE COMPOUNDS).

DICHLOROMETHANE(CH2CL2),MAKE:SDFINE/SRL/MERCK/SPECTROCHEM TO ARDE SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-08 ISSUE 02OF JULY 2015.

ARDE/SPECN/PINAKA/RKT-08 ISSUE 02 OF JULY 2015

COPPER NAPHTHENATE TO SPECN. IS-1078 :1987 (SECOND REVISION) REAFFIRMED 1997

IS-1078 :1987

COMPOSITION SR 227A TYPE B SPECN. NO. L 9620B(A)

L 9620B(A)

AMMUNITION PROTECTIVE COMPOSITION NO. 230 (CEMENT RD 1279, POLYSTYRENE CEMENT) TO SPECN. NO. JSS 8030-41:2006,DC NO.4031-ME, DT.08.01.2010.

JSS 8030-41:2006

CEMENT DOBEKOT-505 TO BE SUPPLIED IN ONE KG CONTAINER

CEMENT DOBEKOT-505 TO BE SUPPLIED IN ONE KG CONTAINER

CAUSTIC SODA TECH.FLAKE IS-252-1991(THIRD REVISION).

IS-252-1991

BLOCK TO DRAWING NUMBER 3-027321 DETAIL NUMBER 16 DC 36050-AMATERIAL: EBONITE TYPE-I UNLOADED TO SPECIFICATION IS:6693

IS:6693

DRAWING NUMBER 3-027321 DETAIL NUMBER 16

BARIUM CHROMATE TO SPECN.NO.IND/ME/794(A) FOR DELAY COMPOSITION ME412(M)(SPECN.NO.IND/ME/820(A)). MEAN DIAMETER OF AVERAGE PARTICLES SHOULD BE MAX. 3 MICRO-METRES.

IND/ME/794(A)

BARIUM PEROXIDE GRADE-I TO SPECIFICATION NO.JSS-6810-96:2004 DC-3831-ME DT.25/01/2005 (REVISION NO.1).

JSS-6810-96:2004

APC-223 TO SPECIFICATION NO.JSS 8010-63:2004 (REVISION NO.2) DC NO. 3841-ME FOR FUZE B-429 ASSY.

JSS 8010-63:2004 FOR FUZE B-429 ASSY.

APC 219 UNDYED TO SPECIFICATION NO. JSS 8010-48: 2004 (REV. NO.1) DC NO. 3842-ME.

JSS 8010-48 : 2004

APC NO. 213 (RD 1177 BLUE) TO SPECIFICATION NO.JSS 8010-41 : 2006, REVISION NO.3 DC NO. 4011-ME DT.08-01-2010

JSS 8010-41 :2006

A.P.C. 210 U/D(N.C.LACQUER) TO SPECIFICATION NO.JSS-8010-64: 2009 (REVISION NO.2) DC 3981-ME DT.24/09/2009

JSS-8010-64:2009

AMMUNITION PROTECTIVE COMPOSITION NO.104, LACQUER, NITROCELLULOSE, RD 1198 D, TO SPECN.NO. JSS 8010-45:2004 (REV.NO.1) DC NO. 3862-ME DT.01.08.2005.

JSS 8010-45:2004

VARNISH, NITROCELLULOSE, RD 1198 B (A.P.C. NO. 103) TO SPECIFICATION NO. IND/ME/368 (C) DC NO. 3754-ME.

IND/ME/368 (C)

AMMN. PROTECTIVE COMPOSITION NO.7 (LUTING MK-6, RD 1178) TO SPECN.JSS 8030-19:2003 (REV.NO.1) DC 3821-ME DT.02-09-2004

JSS 8030-19:2003 Revision No- 1

AMMUNITION PROTECTIVE COMPOSITION NO. 6 SPECN.NO.JSS-8040-12 : 2005 ( REVISION NO.2) DC-4034-ME. DT.08/01/2010.

JSS-8040-12 : 2005

ANTISTATIC POLYTHENE TUBING FOR 120 MM FSAPDS & HESH AMMN. TO DRG.NO. ARDE 9759 DET. NO. 21.

ANTISTATIC POLYTHENE TUBING FOR 120 MM FSAPDS & HESH AMMN. TO DRG.NO. ARDE 9759 DET. NO. 21.

DRG.NO. ARDE 9759 DET. NO. 21.

ANTIMONY TRIOXIDE ( SB2O3), MAKE- MERCK/ALDRICH TO ARDE SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-08 ISSUE NO.2 REV.NO.0 OF JULY 2015.

ARDE/SPECN/PINAKA/RKT-08

ANTIMONY SULPHIDE BLACK LUMP TO SPECIFICATION NO. JSS 6810-71:2008(REV.NO.3),DC 3915-ME DT.21.07.2008

JSS 6810-71:2008

AMYL ACETATE TECHNICAL GRADE TO SPECIFICATION NO.IS-231-1957 REAFFIRMED 2001.AMENDMENT-2

IS-231-1957

BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.

BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.

D S C A T NO-1005-000863

BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08

BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08

DRG NO SK-5375R*3

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITIONSMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,

DS CAT NO 1005-000896

BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17

BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17

DRG.NO-SK-5183*

BLANK FOR CASING BARREL. DRG.NO-SK-5252.

BLANK FOR CASING BARREL. DRG.NO-SK-5252.

DRG.NO-SK-5252

BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.

BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.

DS CAT NO 1005-000895

BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16

BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16

D S CAT NO-1005-000825

BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07

BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07

DS CAT NO. 1005-000951

BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*

BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*

DRG. NO. SK-5579R-AN*

BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08

BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08

DRG NO SK-5381R* D.A. NO. 41/08

ADHESIVE SS-89,SPECN.NO. IND/ME/998 (PROV) DC-3842 ME,DATED 04/04/05;TO BE PACKED IN 5 KG CONTAINERS.

IND/ME/998 (PROV)

ADHESIVE ANEROBIC LOCTITE 271 (PROPRIETARY ARTICLE OF M/S HENKEL ADHESIVES TECHNOLOGIES (I) PVT. LTD,PUNE-411057

ADHESIVE ANEROBIC LOCTITE 271 (PROPRIETARY ARTICLE OF M/S HENKEL ADHESIVES TECHNOLOGIES (I) PVT. LTD,PUNE-411057

NITRIC ACID (AR GRADE)TO SPECIFICATION NO.IS-264-1976(SECOND REVISION)(AMENDMENT 2) REAFFIRMED 1995.

IS-264-1976

ACETIC ACID PURE GRADE SPECN.NO. IS:695-1986(THIRD REVISION) REAFFIRMED- 1996

IS:695-1986

ACID ACETIC GLACIAL AR.TO IS - 695-1986 THIRD REVISION

SPECN: ACID ACETIC GLACIAL AR.TO IS - 695-1986

BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.

BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.

D S CAT NO-1005-000823

• Manufacturing technology:- Machining of component

• 1) Testing/Inspection Facility:- Chemical a Mechanical properties as per std. given drawing .
• 2) Dimensional inspection, for all dimensions given in the drawings a other parameter which are mentioned in relevant drawings.

HINGE WRENCH AS PER DRG NO B-23/MC/1761693/1565 L.F.NO.4039023001

HINGE WRENCH AS PER DRG NO B-23/MC/1761693/1565 L.F.NO.4039023001

SPACER FOR BLOCK D IG46 TO DRG NO U6193741 L.F.NO.7445105001

SPACER FOR BLOCK D IG46 TO DRG NO U6193741 L.F.NO.7445105001

ELECTRICALLY CONDUCTIVE SILICON RUBBER GASKET AS PER SPECN NO: EXCSO-152-SC DIAMETER 1.52MM CYLINDER FOE TI-ESSAA OF T-90 IN ASSY NO 71940100500 ITEM NO 7 L.F.NO 7440010395

ELECTRICALLY CONDUCTIVE SILICON RUBBER GASKET AS PER SPECN NO: EXCSO-152-SC DIAMETER 1.52MM CYLINDER FOE TI-ESSAA OF T-90 IN ASSY NO 71940100500 ITEM NO 7 L.F.NO 7440010395

SOLDERING TAG 2-0,8-3,0-9-04 AS PER GOST 16840-78 FOR STABILIZING UNIT OF T-90 TANK L.F.NO.7440020027

SOLDERING TAG 2-0,8-3,0-9-04 AS PER GOST 16840-78 FOR STABILIZING UNIT OF T-90 TANK L.F.NO.7440020027

SPACER FOR BLOCK D IG46 TO DRG NO U6193740 L.F.NO.7445104001

SPACER FOR BLOCK D IG46 TO DRG NO U6193740 L.F.NO.7445104001

OPAQUE BLACK PAPER AS PER GOST -4665-62 SIZE 1.5MM THICKX 250MM WIDE(IN STANDARD WIDTHH AND LENGTH) L.F.NO.9927095412

OPAQUE BLACK PAPER AS PER GOST -4665-62 SIZE 1.5MM THICKX 250MM WIDE(IN STANDARD WIDTHH AND LENGTH) L.F.NO.9927095412

FILM PET E 20X500 AS PER GOST 24234-80 L.F.NO.7440201763

FILM PET E 20X500 AS PER GOST 24234-80 L.F.NO.7440201763

END PIECE 05-03-LT-07 FOR BLOCK -D AS PER GOST 220027-76 L.F.NO.7440200440

END PIECE 05-03-LT-07 FOR BLOCK -D AS PER GOST 220027-76 L.F.NO.7440200440

STRIP PVKH 15X0.2 FOR BPV2900 AS PER GOST 16214-70 L.F.NO.7441120426

STRIP PVKH 15X0.2 FOR BPV2900 AS PER GOST 16214-70 L.F.NO.7441120426

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

37 PIN FEMALE STAINLESS STEEL CIRCULAR CONNECTOR. PART NO.MS3106F-28-21S ADP M40 D23 SS SG ,MAKE:ALLIED

37 PIN FEMALE STAINLESS STEEL CIRCULAR CONNECTOR. PART NO.MS3106F-28-21S ADP M40 D23 SS SG ,MAKE:ALLIED

PART NO.MS3106F-28-21S ADP M40 D23 SS SG

7 PIN FEMALE CIRCULAR CONNECTOR MS 3106F 24-10S Z ADP M40 D2 X714 SG,MAKE:ALLIED

7 PIN FEMALE CIRCULAR CONNECTOR MS 3106F 24-10S Z ADP M40 D2 X714 SG,MAKE:ALLIED

MS 3106F 24-10S Z ADP M40 D2 X714 SG

2 PIN FEMALE STAINLESS STEEL CIRCULAR CONNECTOR PART NO. MS3106F 10SL-4S ADP M16 D78 SS SG, MAKE: ALLIED

2 PIN FEMALE STAINLESS STEEL CIRCULAR CONNECTOR PART NO. MS3106F 10SL-4S ADP M16 D78 SS SG, MAKE: ALLIED

PART NO. MS3106F 10SL-4S ADP M16 D78 SS SG

M16 GLAND WITH CHECK NUT, WITH THREAD LENGTH 12MM,PART NO.AEC M16 L 12 D8 BCG+NT-BR NI GZ, MAKE: ALLIED

M16 GLAND WITH CHECK NUT, WITH THREAD LENGTH 12MM,PART NO.AEC M16 L 12 D8 BCG+NT-BR NI GZ, MAKE: ALLIED

PART NO.AEC M16 L 12 D8 BCG+NT-BR NI GZ

M25 GLAND WITH CHECK NUT, WITH THREAD LENGTH 15MM,PART NO.AEC M25 L15 D15 BCG+NT-BR NI GZ, MAKE: ALLIED

M25 GLAND WITH CHECK NUT, WITH THREAD LENGTH 15MM,PART NO.AEC M25 L15 D15 BCG+NT-BR NI GZ, MAKE: ALLIED

PART NO.AEC M25 L15 D15 BCG+NT-BR NI GZ

2 PIN MALE STAINLESS STEEL FLANGE TYPE CIRCULAR CONNECTOR PART NO.MS 3102R 10SL-4P SS C&C, MAKE: ALLIED

2 PIN MALE STAINLESS STEEL FLANGE TYPE CIRCULAR CONNECTOR PART NO.MS 3102R 10SL-4P SS C&C, MAKE: ALLIED

PART NO.MS 3102R 10SL-4P SS C&C

10 PIN FEMALE FLANGE TYPE CIRCULAR CONNECTOR PART NO.MS 3102 R 18-19S, MAKE: ALLIED

10 PIN FEMALE FLANGE TYPE CIRCULAR CONNECTOR PART NO.MS 3102 R 18-19S, MAKE: ALLIED

PART NO.MS 3102 R 18-19S