MILD STEEL SHEET 1.6 MM THICK BS:1449 PART-1 B/1962-HR 4

MILD STEEL SHEET 1.6 MM THICK BS:1449 PART-1 B/1962-HR 4

STEEL SHEET 2.00 MM THICK, GDE- ISH330S TO IS:5986-2017

STEEL SHEET 2.00 MM THICK, GDE- ISH330S TO IS:5986-2017

CARBON STEEL ROD 6 MM DIA.IS-2073-C 40

CARBON STEEL ROD 6 MM DIA.IS-2073-C 40

CARBON STEEL ROD 5 MM DIA. IS-2073/C-40.SUPPRESD TO IS: 7283-1974

CARBON STEEL ROD 5 MM DIA. IS-2073/C-40.SUPPRESD TO IS: 7283-1974

CARBON STEEL ROD 10MM (3/8"DIA) IN STD.L STEEL, BS : 970 EN-5

CARBON STEEL ROD 10MM (3/8"DIA) IN STD.L STEEL, BS : 970 EN-5

CARBON STEEL ROD 50 MM DIA C-30 OFIS1570-1961

CARBON STEEL ROD 50 MM DIA C-30 OFIS1570-1961

CARBON STEEL ROD 38.MM.DIA IS-1570-1961 C30

CARBON STEEL ROD 38.MM.DIA IS-1570-1961 C30

CARBON STEEL ROD 35 MM (1-3/8") ]DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 35 MM (1-3/8") ]DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 30.MM DIA. IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 30.MM DIA. IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 16.MM.[5/8 INCH] DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 16.MM.[5/8 INCH] DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROS 70 MM[2-3/4'']DIA IS-5517/1978-C/30

CARBON STEEL ROS 70 MM[2-3/4'']DIA IS-5517/1978-C/30

CARBON STEEL ROD 54 MM.DIA. IS:4072 1975 GD-1, 55C6

CARBON STEEL ROD 54 MM.DIA. IS:4072 1975 GD-1, 55C6

CARBON STEEL ROD 32 MM [1-1/4"] DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 32 MM [1-1/4"] DIA IS:1570(PART-2)-1979, 30C8

THREAD COTTON SEWING,UNDYED,UNPROOFED 16 TEX X 6 IN COPS OF500 METR SPECN: JSS-8310-02:2007 (REVISION NO.2) DC 4020-ME DT.08.01.2010.

JSS-8310-02:2007

TAPE, WEBBING COTTON, PROOFED, SIZE: 25 MM +/- 1.6 MM WIDE X 1.0 MM +/- 0.1 MM THICK, SPECIFICATION NO.JSS 8305-18:2006 (REV.NO.2) DC NO. 3946-ME DT.04.04.2009. NOTE:BREAKING LOAD 120 KG MINIMUM AS PER SPECIAL REQUIREMENT

JSS 8305-18:2006

TAPE ADHESIVE WATERPROOF FABRIC BASE, SIZE: 12.7 MM(1/2") WIDE-COLOUR BLACK TO SPECN. IND/ME/790(A) DC 3754-MEDT. 12.12.02, EACH ROLL OF 50 MTRS.

IND/ME/790(A

CLOTH COVER FOR BOMB 120 MM HE MADE OF CLOTH DOSUTI WHITE TO SPECN. NO. IS: 179 - 1977 (2ND REVISION) TO THE DRG. NO. FQ/XI/169.

IS: 179 - 1977

DRG. NO. FQ/XI/169.

CLOTH CALICO (BLEACHED) SIZE - 910 MM WIDE TO SPECN. IS:5088-1982 VARIETY NO.3,(FIRST REVISION) REAFFIRMED-2001, AMDT-2

IS:5088-1982 VARIETY NO.3,

CLOTH ALL WOOL MELTON FINISH PLAIN WEAVE, SIZE 1320 MM WIDE X 1.57 MM THICK, SPECN. JSS 8305- 16: 2009, REVISION NO.2, DC NO.3974-ME DT.24.09.2009.

JSS 8305- 16: 2009

PLATINUM - IRIDIUM ( 90:10 ) WIRE, DIAMETER 0.04 MM TO SPECIFICATION USSR-TY-48-1-72-73 IN STANDARD ROLLS CHEMICAL COMPOSITION TO GOST 13498-79, GRADE-P & I-10.

USSR-TY-48-1-72-73 IN STANDARD ROLLS CHEMICAL COMPOSITION TO GOST 13498-79, GRADE-P & I-10.

LEAD WIRE, SIZE 1.25 +/- 0.25MM DIA.TO SPECN.GOST 5655-67. LEAD SHOULD CONFORM TO ANY GRADE OF LEAD TO SPECN. GOST 3778-77 AND TO BE SUPPLIED IN 03 TO 05 KG REEL.

GOST 5655-67. GRADE OF LEAD TO SPECN. GOST 3778-77

WASHER TO DRG.NO.ERDL.DRG.1287, DET.NO.2 OR ARDE SK 3258 DET.8, SPECN.:HEMRL/PYRO/PS/207(C)

HEMRL/PYRO/PS/207(C)

DRG.NO.ERDL.DRG.1287,

WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4.

WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4.

DES.REF.155-1120

WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.

WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.

DRG. PART NO. QX-176

WASHER-A & WASHER-B DRG.PT.NO.ISV-1589 & ISV 1590 DC-36238-A (FOR BOTH DRGS)MAT.:HDPE TYPE 2 TO SPEC.JSS 9330-03-1995 REV NO.1,2 TO 3% CARBON BLACK TO SPECN.IND/ME/944(PROV)IS TO BEADDED, TO THE BASIC MATERIAL, TO ACHIEVE BLACK COLOUR

JSS 9330-03-1995

DRG.PT.NO.ISV-1589 & ISV 1590

WASHER "D" TO DRG.PT.NO.ISV-1592 DC-36488-A, DT.17-11-98(FOR CONTAINER 39 A) NOTE:-AFTER CLEANING & INSPECTION,THE WASHER WILL BE GALVANISED OR PHOSPHATED FOLLOWED BY A FINISHING COAT OF VARNISH,SHELLAC APC 225,30% TO SPCN.JSS 8010-63-1991 MAT.: IS:513-94 GRADE 'O' IN 1/4H CONDITIONS

JSS 8010-63-1991

DRG.PT.NO.ISV-1592

WASHER "C" TO DRG.PT.NO.ISV-1591 DC-36488-A, DT.17-11-98(FOR CONTAINER 39 A) NOTE:-AFTER CLEANING & INSPECTION,THE WASHER WILL BE GALVANISED OR PHOSPHATED FOLLOWED BY A FINISHING COAT OF VARNISH,SHELLAC APC 225,30% TO SPCN.JSS 8010-63-1991 MAT.:-IS:513-94 GRADE 'O' IN 1/4H CONDITIONS

JSS 8010-63-1991

DRG.PT.NO.ISV-1591

STEEL CUP WITH SEAL FOR FSAPDS TO DRG. PT. NO. IRW 29 SA DES. REF. ARDE 2120, DET. NO. 10 & SPECN NO. CQA(A) 5709

CQA(A) 5709

DRG. PT. NO. IRW 29 SA

SQUIB HOUSING EMPTY (FOR PROOF) TO DRG.NO.ERDL.DRG.1295, DET.NO.1 TO SPECN.NO. HEMRL/PYRO/PS/207(C)

HEMRL/PYRO/PS/207(C)

DRG.NO.ERDL.DRG.1295

SPACER (MATERIAL- CELLULOID SHEET TRANSPARENT) TO DRG. NO. NASK 754/2 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE.

SPACER (MATERIAL- CELLULOID SHEET TRANSPARENT) TO DRG. NO. NASK 754/2 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE.

DRG. NO. NASK 754/2 (PROV.)

SLIDER ASSEMBLY TO DRG.NO. ERDL.DRG.1287 DET.NO.3 TO DET.NO.6 TO SPECN.NO.HEMRL/PYRO/PS/207(C).

HEMRL/PYRO/PS/207(C).

DRG.1287 DET. NO.3 TO DET.NO.6 DRG.NO. ERDL.

SHEET MILD STEEL,SIZE 1830 MM X 915 MM X 1.6 MM THICK R.A. -1998 GRADE "O" QUARTER HARD

IS-513-1994

MILD STEEL SHEET 16 B.G. (2500 X 1000 X 1.6 MM) BS 1449:PART-1:1983 GRADE CS 4 SECTION 4 H2 OR IS:513-1994 GRADE "O" QUARTER HARD.

IS:513-1994

SCREW,SET,SLOTTED HEAD, FULL DOG POINT NO.2B,A,TO DESIGNER'S REF: CIA/AMN/885,DC-33833-A.

SCREW,SET,SLOTTED HEAD, FULL DOG POINT NO.2B,A,TO DESIGNER'S REF: CIA/AMN/885,DC-33833-A.

DESIGNER'S REF: CIA/AMN/885

RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A

RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A

DRG.PT.NO. ITX-239

STEEL TAPE BANDING BLUED,SIZE 12.7 MM WIDE X 0.498 (26 BG)THICK TO SPECN.IS:5872-1990-GRADE-2 IN COIL FORM AND SUITABLY RUST PROOFED.

SPECN.IS:5872-1990-GRADE-2 IN COIL FORM AND SUITABLY RUST PROOFED.

STRAP STEEL SIZE 20 MM WIDE X 0.8 MM THICK SPECN IS-5872-1990. GRADE-2.

IS-5872-1990. GRADE-2.

ELECTROLYTIC TIN PLATE EQUALLY COATED SIZE 400 +/- 2 MM LENG TH X 35 +/- 0.5 MM WIDE X 0.2 MM THICK. CODE E 11.2/11.2 TEM PER T 57/ T 61, SPECN. NO. IS-1993-1993 (THIRD REVISION ) RA-1998

IS-1993-1993

STRIP LEAD GENERAL PURPOSE,SIZE 35 MM PLUS MINUS 1.75 MM X O.4 MM PLUS MINUS 0.04 MM THICK TO SPECN IS: 405 (PART-2) -1992 (3 RD REVISION) IN REEL SIZE 3 TO 10 KGS.

IS: 405 (PART-2) -1992 IN REEL SIZE 3 TO 10 KGS.

STRIP LEAD CHEMICAL PURPOSE (PURE LEAD)IS: 405-1992 (PART-1)35 PLUS MINUS 2 MM WIDE X 1.1 PLUS MINUS 0.08 MM THICK, TO BE SUPPLIED IN 5-10 KG REEL .

IS: 405-1992

CAP COPPER ALLOY STRIP,SIZE:17 MM PLUS MINUS 0.2 MM WIDE X 1.6 PLUS MINUS 0.04 MM THICK IN COIL FORM AND LENGTH 1O MTRS SPECIFICATION IS:3167-1982,RA-1998,WITH HARDNESS 55 TO 75VPN

IS:3167-1982,RA-1998

CAP COPPER ALLOY STRIP TO IS:3167-1982, 1ST REVISION,REAFFIR MED 1998 ANNEALED,SIZE 22.225 MM PLUS MINUS 0.25 MM WIDE X 0.21 MM PLUS MINUS 0.025 MM THICK,COILED.

IS:3167-1982

CAP COPPER ALLOY STRIP, SIZE:13.5 MM +/-0.2 MM WIDE X 0.18(+) 0.02 MM (-)0.00MM THICK IN ANNEALED CONDITION, HARDNESS 55 TO75 VPN AT 10 KG LOAD BOW CONDITION 2.54 MM (MAX)/METER TO SPECN. IS:3167-1982 (FIRST REVISION) R.A-1998

CAP COPPER ALLOY STRIP, SIZE:13.5 MM +/-0.2 MM WIDE X 0.18(+) 0.02 MM (-)0.00MM THICK IN ANNEALED CONDITION, HARDNESS 55 TO75 VPN AT 10 KG LOAD BOW CONDITION 2.54 MM (MAX)/METER TO SPECN. IS:3167-1982 (FIRST REVISION) R.A-1998

STRIP COPPER,SIZE 16 PLUS MINUS 0.2 MM WIDE X 0.18 PLUS MINUS 0.02 MM THICK IN COIL FORM. MAX. ALLOWABLE BOW CONDITION 2.54 MM PER MTR LENGTH OF COIL AND COIL LENGTH 20 MTR LENGTH MINIMUM, SPECN.BS 2870,C-104,C-106,HARDNESS 55 TO75 VPN.

BS 2870, C-104,C-106, HARDNESS 55 TO 75 VPN

CAP COPPER ALLOY STRIP TO IS:3167-1982.HARDNESS 50 TO 75 VP LOAD 10 KG. SIZE 21 MM +/- 0.2 MM WIDE X 0.26 MM +/- 0.066MM THICK. MAXIMUM ALLOWABLE BOW CONDITION @ 2.54 MM PER MTR LENGTH OF COIL. COIL LENGTH MINIMUM 70 MTR.

IS:3167-1982

BRASS STRIP TO JSS-9535-02:2008, REVISION NO.3, HARDNESS 55 TO 65 VPN, SIZE 70 MM +/- 0.5 MM WIDE X 0.8 +/- 0.03 MMTHICK.

JSS-9535-02:2008

BRASS STRIP TO SPECIFICATION JSS 9535 - 2 ANNEALED, SIZE 83 MM PLUS MINUS 0.5 MM WIDE X 0.82 MM PLUS 0.03 MM MINUS 0.02 MM THICK.

JSS 9535 - 2

STRIP BRASS,SIZE 60MM +/- 0.5MM WIDE X 0.8MM +/-0.03MM THICK ANNEALED HARDNESS 55 TO 65 VPN, SPECN.NO.JSS 9535-02:2008, REVISION NO.3, LENGTH OF THE COIL SHOULD BE MINIMUM 20 MTRS.

JSS 9535-02:2008

STEEL ROD 16 MM DIA. IS:5517-1983 DESIG.30 C 8

STEEL ROD 16 MM DIA. IS:5517-1983 DESIG.30 C 8

STEEL ROD 13 MM DIA. IS:1570(PART-2)-1979, 30C8

STEEL ROD 13 MM DIA. IS:1570(PART-2)-1979, 30C8

STEEL SHEET 1.6 MM THICK BS-1449 PT.2B/EN 2A DEEP DRAWING QUALITY

STEEL SHEET 1.6 MM THICK BS-1449 PT.2B/EN 2A DEEP DRAWING QUALITY

STEEL ROD 28MM DIA BS: 970 PT. 1-1985 GDE. B17 M40 OR STEEL ROD OF IS:5517- -1993 DESG. 40 NI6 CR4 MO3.

STEEL ROD 28MM DIA BS: 970 PT. 1-1985 GDE. B17 M40 OR STEEL ROD OF IS:5517- -1993 DESG. 40 NI6 CR4 MO3.

MILD ST.FLAT 13MMX50MM (1/2"X2-1/ 4") W. SPECN. IS-1570/C-15

MILD ST.FLAT 13MMX50MM (1/2"X2-1/ 4") W. SPECN. IS-1570/C-15

ALUMINIUM ALLOY ROD, SIZE 22 MM DIA TO IS:733-1983 DESIGNATI ON 24345 WP CONDITION MINIMUM LENGTH 2 METER.

IS:733-1983

BRASS STRIP TO IS-410-1977 (3RD REVISION) (RA-1996) (AMDT.1) CUZN-37 HB. SIZE 19.5 MM +/- 0.1 MM WIDE X 0.15 MM +/-0.025 MM THICK IN COIL FORM AND MINIMUM LENGTH OF COIL 20 MTR

IS-410-1977

ALUMINIUM STRIP TO IS-737-1986(3RD REVISION), REAFFIRMED 1996 GRADE 19000 CONDITION H4. SIZE 20 PLUS 0.5 MM WIDE X0.60 MM PLUS MINUS 0.05 MM THICK

IS-737-1986

STRIP ALUMINIUM ALLOY,SIZE 72 MM WIDE X 0.6 MM THICK TOSPECIFICATION BS-1470-1987 DESIGNATION 5251 (OLD SPECN.NO. BS-1470-1969 NS 4 -1/2 HARD) OR BS-1470-1987 DESIGNATION 5154A (OLD SPECN.NO. BS-1470-1969 NS 5 -1/4 HARD).

BS-1470-1987 DESIGNATION 5251 (OLD SPECN.NO.BS-1470-1969 NS 4 -1/2 HARD) OR BS-1470-1987 DESIGNATION 5154A (OLD SPECN.NO. BS-1470-1969 NS 5 -1/4 HARD).

ALUMINIUM STRIP TO IS-737-1986,3RD REVISION, GRADE 19000 CONDITION H4. SIZE 20 MM +/- 0.2 MM WIDE X 0.55 PLUS 0.03 MM MINUS 0.00 MM THICK. MAXIMUM ALLOWABLE BOW CONDITION @2.54MM PER MTR LENGTH OF COIL. COIL LENGTH MINIMUM 60 TO 70 MTR.

IS-737-1986,3RD REVISION

STRIP ALUMINIUM SIZE 51 MM PLUS MINUS 0.5 MM WIDE X 0.51 MM PLUS MINUS 0.02 MM THICK TO SPECN.BS 1470-1987- SIA "O" OR SIB "O" OR IS-737-1986 GRADE 19000 CONDITION "O".

BS 1470-1987-SIA "O" OR SIB "O" OR IS-737-1986 GRADE 19000 CONDITION "O".

ALUMINIUM STRIP TO IS-737-1986 GRADE 19000 CONDITION "O"SIZE 19 PLUS MINUS 0.2 MM WIDE X 0.48 MM PLUS MINUS 0.02 MM THICK BOW CONDITION @ 2.54 MM PER MTR LENGTH OF COIL. COIL LENGTH MINIMUM 20 MTR.

IS-737-1986 GRADE 19000

M. S. NAILS WIRE IRON ROUND SHANK AS PER SPECN.IS:723-1972. SIZE - 12.7 MM X 17 GAUGE. ( 0.5" X 17 G. )

IS:723-1972.

NAILS M. S. WIRE IRON (GALVD) AS PER SPECN. IS: 723- 1972 (FIRST REV) (AMDT-3) SIZE - 25 MM X 14 GAUGE (1" X 14 G.)

IS: 723- 1972

M. S. NAILS WIRE(GALVD) AS PER SPECN.IS: 723-1972 SIZE 20MM X 17 GAUGE.(3/4" X 17 G.) (FIRST REVISION WITH AMENDMENT-3) REAFFIRMED 2001.

IS: 723-1972 SIZE 20MM X 17 GAUGE.(3/4" X 17 G.) (FIRST REVISION WITH AMENDMENT-3) REAFFIRMED 2001

FOIL TIN/LEAD, SIZE: 571.5 MM X 342.9 MM X 0.038 MM THICK SPECIFICATION JSS 9535-06 : 2010 (REVISION NO.2) DC 4085-ME.

JSS 9535-06 : 2010

CARBON STEEL FLAT 1/2" ( 12.70 MM ) X 1-1/2" ( 38.10 MM ) WIDE. C25 OF IS:7283

CARBON STEEL FLAT 1/2" ( 12.70 MM ) X 1-1/2" ( 38.10 MM ) WIDE. C25 OF IS:7283

STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975

STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975

M.S. ROD 6.00 MM(1/4") DIA. AS PER SEPCN IS-2073/C-20 IN STAIGHT LENGTH.

M.S. ROD 6.00 MM(1/4") DIA. AS PER SEPCN IS-2073/C-20 IN STAIGHT LENGTH.

M.S.ROD 5.0 MM DIA (3/16") IS-1570 C/20 IN STRAIGHT LENGTH. (NOT COILED) IS-1570 C/20

M.S.ROD 5.0 MM DIA (3/16") IS-1570 C/20 IN STRAIGHT LENGTH. (NOT COILED) IS-1570 C/20

MILD STEEL ROD 8 SWG (0.16"/4.064 MM ) AS PER SPECN.IS -280 /1972. 1/4 HARD. IN STRAIGHT STANDARD LENGTH.

MILD STEEL ROD 8 SWG (0.16"/4.064 MM ) AS PER SPECN.IS -280 /1972. 1/4 HARD. IN STRAIGHT STANDARD LENGTH.

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TOSP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

ECN.JSS:9510-06-2000

MILD STEEL ROD 3.15 MM BS-970/EN-3 B.

MILD STEEL ROD 3.15 MM BS-970/EN-3 B.

M.S. ROD 6.MM DIA. BS-970/EN-3 D.

M.S. ROD 6.MM DIA. BS-970/EN-3 D.

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

STEEL ROD 22.00 MM DIA.AS PER SPECN. TO IS-7283,10S25.

STEEL ROD 22.00 MM DIA.AS PER SPECN. TO IS-7283,10S25.

MILD STEEL ROD 73 MM[2-7/8'']DIA AS PER SPECN.BS-970/EN-3A.

MILD STEEL ROD 73 MM[2-7/8'']DIA AS PER SPECN.BS-970/EN-3A.

PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION.

PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION.

DS CAT.5315-001552

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02

RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

DS CAT NO. 5315-001530

• Machining

• As per drawing

RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION.

RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION.

5320-002189

SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96

SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96

DS CAT NO. 1005-000653