CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

CQA(A) 2303 (F) DC NO. 36747-A DT. 05.03.2001 DRG NO. ITV 21 DC NO. 36747-A DT 09.03.2001

DRG.PT.NO. ISV 862 DCI-36

DRG.PT.NO. ISV 862 DCI-36

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A

DESGN REF. NO.CIA/AMN/1799 DET NO 7 DRG PT NO ITW 68 DC 36416-A DC NO 37204- A DT. 20.02.2009

CQA(A) - (A) 1504 ( E ) DC NO. 35870 - A

CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A

CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A

ANTISTATIC PACKING PIECES CONSISTING OF (1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

(1) PIECE PACKING BOTTOM TO DRG NO. CQA(A)/AMN/3194 DC 36847A (2) PIECE PACKING MIDDLE TO DRG NO. CQA (A)/AMN/3195 DC 36847A (3) PIECE PACKING TOP TO DRG NO. CQA (A)/AMN/3196 DC 36847A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. GOLDEN YELLOW. ISC 356 OF IS:5 2007 (LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 VI REV WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 VI REV WITH A.NO.1 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT FINISH WITH GLOSS VALUE 31 TO 50

BRASS CASTING FOR INSERT LOCKING TO DRG No 2A46M 109 44

BRASS CASTING FOR INSERT LOCKING TO DRG No 2A46M 109 44

2A46M 109 44

Ring Centrifugal Casting OF RING TO DRG No GCF TM 06 G REF DRG NO 2A 26 08 26 D S CAT No 5365 003970

Ring Centrifugal Casting OF RING TO DRG No GCF TM 06 G REF DRG NO 2A 26 08 26 D S CAT No 5365 003970

GCF TM 06 G REF DRG NO 2A 26 08 26 D S CAT No 5365 003970

PAINT R.M. MARKING FOR PACKAGES & PETROL CONTAINERS. RED SIGNAL ISC 537 OF IS:5 2007 REAFF 2012 (VITH REV)(LATEST ISSUE) SPEC IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A, SPECN. NO. CQA(A) 1504(E) DC 35870-A

DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A

STRAPPING 13MM WIDEX 0.5MM THICK TENSILE STRENGTH 63 TO 70 KGF/SQR MM (618N/SQRMM TO 686N/SQRMM) BLUE FININSH. COIL IMME-RSED IN ANTIRUST SOLUTION PRIOR TO WRAPPING WITH SUITABLE HESSIAN CLOTH.

APPROX OUTSIDE DIA OF COIL TO BE 650MMXINT DIA 400MM SPECN IS5872-1990(LATEST) REVISION IIND REAFF : 2010

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-63 : 2012 (REV NO.3) DC NO. 5101-ME DT. 21.12.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

JSS 8010-48 : 2012 (REV NO.2) DC NO. 5095-ME DT 05.10.2012

AMMUNITION PROTECTIVE COMPOSITION NO 2 (CEMENT RD 1192 K AMMUNITION)

SPECN JSS 8030-14-2009 (REVISION NO.3) DC 4054-ME, DT 08.01.2010

AMMUNITION PROTECTIVE COMPOSITION NO.10(LUTING THIN MK-5) SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

SPECN-JSS 8030-15-2009, (REVISION NO.2) DC- 4048-ME DT. 08.01.2010

GAS TO BE SUPPLIED IN FIRM'S CYLINDERS

HEF/IO/64 DATED 21.12.1995 ELECTROLYTIC GRADE (FROM ELECTROLYSIS OF WATER)

PRITHVI AIR VERSION (P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)

RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 &ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)

SPEC. HEF/IO/68B DT 25.04.08 (A) CLEAR LIQUID (B) SP.GR.AT 20DEG CENT.MAX.0.73 (C)TEA CONTENT 98.5% MIN. (D)WATER INSOL.MIX OF TEA & WATER IN 1.1 RATIO BY VOL.&COOLED TO 18 DEG.CENT SHOULD BE COMPLETELY MISCIBLE (E) DIST.RANGE 85-91 DEG.CENT MIN 95% (F)WATER CONTENT LESS THAN 0.1% (BY KARL FISHER METHOD)

HEF/IO/68B DT. 25.04.08

JSS SPEC. NO. JSS: 9135-02 CONFORMING TO IS 10332

JSS SPEC. NO. JSS: 9135-02 CONFORMING TO IS 10332

JSS SPEC NO. JSS : 9135-02 CONFORMING TO IS 798

JSS SPEC NO. JSS : 9135-02 CONFORMING TO IS 798

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)

(P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IOTS DATED OCT,2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DATED OCT, 2001 (MODIFIED FROM TIME TO TIME)

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14

TOLUENE PURE NITRATION GRADE

IS : 537- 2025 WITH THE FOLLOWING ADDITIONAL CLAUSES (1)PURITY 99.7% MIN. (2) Non Aromatic Hydrocarbons- 0.3% MAX. (3) BENZENE 0.05% MAX ,ADDITIONAL TESTS (PURITY NON AROMATIC HYDROCARBON AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY .

• ATTACHED

• ATTACHED

IS : 264 - 2005 (REAFF 2017) III RD REV. TOTAL ACIDITY (AS HNO3) PERCENT BY MASS, MIN (EXPLOSIVE GRADE) : 98.0% RE-SIDUE ON IGNITION PERCENT MIN. 0.05, CHLORIDES (AS CL) PER-CENT MAX 0.001, SULPHATE (AS H2SO4) PERCENT MAX 0.03 NITROUS ACID AS (HNO2) PERCENT BY MASS MAX 0.2

IS : 264 - 2005 (REAFF 2017) III RD REV

METABISULPHITE CONTENT SHALL BE NIL. PH OF 10% SOLUTION SHOULD BE 8.5 TO 9.5

IS.247-1987 (FOURTH REVISION) (RE-AFFIRMED 2015)

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

TEND :2509*4 (for K-1202*5)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FILLING OF GAS IN OUR CYLINDER AFTER NECESSARY PRESSURE TESTING OF CYLINDER, CYLINDER CAPACITY 50 KG.

IS 432-1993 REAFF 1999 (1ST REV) REAFF 1999 (EDITION 2.1) (1998-02)

IS 8397- 1976 REAFF 2011 WITH ADDITIONAL CLAUSE OF NITROBENZENE CONTENT 0.10% MAXIMUM

IS 8397- 1976 REAFF 2011

IS 1089-1986, REAFF 2003) EXPLOSIVES GRADE, (IIND REV) (A) CONTENTS OF FREE SO3:20% TO 22% (B) IRON:0.01% MAXIMUM (C) LEAD:0.01% MAXIMUM (D) RESIDUE : 0.06% MAXIMUM (E) SPECIFIC GRAVITY MINIMUM 1.920 MAXIMUM 1.925 AT 15 DEG C

IS 1089-1986, REAFF 2003)

9910933683

DRW NO. HE-5036/B

DRW NO. HE-5036/B

IS 248-1987 REAFF-2010 4TH REV

IS 248-1987 REAFF-2010 4TH REV

(GRADE MV 2) SPECN IS-1593 1982 (IIND REV) REAFF 2004

(GRADE MV 2) SPECN IS-1593 1982 (IIND REV) REAFF 2004

RIFLE BOX SMALL TO DRG. NO. RFI NO. 10368 FOR 7.62X51 MM SNIPER RIFLE

RIFLE BOX SMALL TO DRG. NO. RFI NO. 10368 FOR 7.62X51 MM SNIPER RIFLE

RFI NO. 10368

GENERATOR HAND FIRING 105 37 LFG E2 105-IFG MK-II TO DRG. NO. LRDE DGN.SK NO z.649-G,CAT NO. Z6/6115-000538 TO SPECN LRDE TS-2479. SL.NO.106 SCHEDULE.

SPECNLRDE TS-2479. SL.NO.106 SCHEDULE.

CAT NO. Z6/6115-000538

ROTATORY SWITCH

ROTATORY SWITCH

ASSY. OF DRIVER SEAT RH PT. NO. X8001600

ASSY. OF DRIVER SEAT RH PT. NO. X8001600

ASSY OF CO-DRIVER SEAT LH PT. NO. X8001300-B

ASSY OF CO-DRIVER SEAT LH PT. NO. X8001300-B

12 V EDC 15 VM OF VP 37 FIE WITH ECU AND SEP ENGINE WIRING HARNESS FOR 135 KW BS-III STAL VEH PART NO. A2J00500

12 V EDC 15 VM OF VP 37 FIE WITH ECU AND SEP ENGINE WIRING HARNESS FOR 135 KW BS-III STAL VEH PART NO. A2J00500

SCREW-FOOT BRAKE-LYNX BS-III PART NO. F 7873550

SCREW-FOOT BRAKE-LYNX BS-III PART NO. F 7873550

FLICK VALVE COVER, BS- III, PART NO. F7871980

FLICK VALVE COVER, BS- III, PART NO. F7871980

IGNITION STARTER SWITCH, BS III PART NO. FJ107500

IGNITION STARTER SWITCH, BS-III PART NO. FJ107500

Bandolier 1A Complete

Drg. No. ARDE-1942, Sheet no. 3 Drg. Part No. ISV-423 DC No. ..............

WIPER MOTOR-1614, BS-III

WIPER MOTOR-1614, BS-III

Flick Valve Assy BS III B3952504 Total 2 Items Details enclosed as Annexure III

Flick Valve Assy BS III B3952504 Total 2 Items Details enclosed as Annexure III

Operating Pedal and Linkage part No BOY02310 (Total 6 Items Enclosed As pe Annexure-II)

Operating Pedal and Linkage part No BOY02310 (Total 6 Items Enclosed As pe Annexure-II)

General and Electrical Total 24 items for MPVBS- III (List of Items Along with Part No., Item name and qty per/ Vehicle is enclosed

General and Electrical Total 24 items for MPVBS- III (List of Items Along with Part No., Item name and qty per/ Vehicle is enclosed

MPV KIT (Engine Items)

MPV KIT (Engine Items)

17 items as per enclosed list-1/OR Manufacturing of MPV

17 items as per enclosed list-1/OR Manufacturing of MPV

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 8

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn

Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn LF No 7013889230

9H623

St. Rod 8.23mm dia for JVPC

St. Rod 8.23mm dia for JVPC

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

Disc Adjusting Obturator SHIMs as per Drg No 161 646

As per Drg. No. 161-646

SHIM to Drg No 166-461

As per Drg No 166-461

SHIM to Drg No 176 1165

As per Drg. No. 176-1165

SHIM to Drg No 176 1170

As per Drg No 176-1170

SHIMS to Drg No 176 2118

As per Drg. No 176-2118

SHIM as per Drg No 176 1181

As per Drg No 176 1181

SHIMs as per Drg No 176-8157, 176-8158 and 176-8159

As per Drg No 176-8157, 176-8158 and 176-8159

SHIMS to Drg No 166 451

As per Drg No 166-451

GE LENS AS PER DRAWING NO. MRS5000061 OF MRS OF TI-SIGHT "ESSA"

MRS5000061

MRS5000061

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

FABRICATION, SUPPLY AND FITMENT OF LAUNDER SYSTEM AS PER ANNEXURE A

FABRICATION, SUPPLY AND FITMENT OF LAUNDER SYSTEM AS PER ANNEXURE A

RELINING OF CERAMIC FOAM FILTER BOX WITH FUSED SILICA BASED CASTABLE REFRACTORY,HYDROPHOBIC MICROPOROUS HIGH DENSITY HIGH TEMPERATURE INSULATION PANELS AND CERAMIC FIBRE BOARD.

RELINING OF CERAMIC FOAM FILTER BOX WITH FUSED SILICA BASED CASTABLE REFRACTORY,HYDROPHOBIC MICROPOROUS HIGH DENSITY HIGH TEMPERATURE INSULATION PANELS AND CERAMIC FIBRE BOARD.

MICRO VALVE (FOR ENCON-2A BURNER)

MICRO VALVE (FOR ENCON-2A BURNER)

FILM BURNER (ENCON-2A),CAPACITY-UP TO 20 LTR./HRS.

FILM BURNER (ENCON-2A),CAPACITY-UP TO 20 LTR./HRS.

FIXING PLATE AS PER DRG.NO.DC-109 B.

FIXING PLATE AS PER DRG.NO.DC-109 B.

T-PLATE RET NUT, AL-TAPERD 16 INCH SM,REFNO 41997,WAG STAFF ITEM NO.45020

T-PLATE RET NUT, AL-TAPERD 16 INCH SM,REFNO 41997,WAG STAFF ITEM NO.45020

MOULD BOTTOM COVER ASSY ,MC III/III 16 INCH TABLE 15.935 ASI.094 REF NO 41997 WAG STAFF ITEM NO 42010

MOULD BOTTOM COVER ASSY ,MC III/III 16 INCH TABLE 15.935 ASI.094 REF NO 41997 WAG STAFF ITEM NO 42010

BAFFLE RING MC 16 INCH TABLE , REF NO.41997 WAG STAFF ITEM NO PN1N3

BAFFLE RING MC 16 INCH TABLE , REF NO.41997 WAG STAFF ITEM NO PN1N3

SEAL SILICON EXTRUDED, MC III 16 INCH REF NO 32700207-000 WAG STAFF ITEM NO PN9EZ

SEAL SILICON EXTRUDED, MC III 16 INCH REF NO 32700207-000 WAG STAFF ITEM NO PN9EZ

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

RFI.SK.10367