DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

FASTENER SET,TURN LOCK DRG NO.MCT-1189/1

FASTENER SET,TURN LOCK DRG NO.MCT-1189/1

DRG NO.MCT-1189/1

INVESTMENT CASTING FOR GEAR TO DRG NO. ODD/C/962/1

INVESTMENT CASTING FOR GEAR TO DRG NO. ODD/C/962/1

DRG NO. ODD/C/962/1

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

CQA(A) 2328(c), Drg. No. ARDE 2064 Det 14 Pt.No. ITV 124

CQA(A) 2328(c), Drg. No. ARDE 2064 Det 14 Pt.No. ITV 124

JSS 1376-05 :1994

JSS 1376-05 :1994

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DRG. NO. 2907A30011

DRG. NO. 2907A30011

IS-2307-2004

IS-2307-2004

CQA(A) 4921

CQA(A) 4921

DRG.NO. 155-1210

DRG.NO. 155-1210

ETHYL CELLULOSE (N-200) TO PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A ,

SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A ,

DRG.NO. MCT-2871/1

ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE.

ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE.

MCT-2650/3

SCREW LONG HOUSING AS PER DRG.NO.CQA(I)-792/31 FOR TELE.SIGHT MK-III

SCREW LONG HOUSING AS PER DRG.NO.CQA(I)-792/31 FOR TELE.SIGHT MK-III

DRG.NO.CQA(I)-792/31

SCREW ,(SLIDE) AS PER DRG.NO. CQA(I)-792/27 FOR TELE.SIGHT MK-III

SCREW ,(SLIDE) AS PER DRG.NO. CQA(I)-792/27 FOR TELE.SIGHT MK-III

DRG.NO. CQA(I)-792/27

LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III

LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III

DRG.NO. CQA(I)-793/28

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

DRG.NO.MCT-1079

SCREW MOUNTING BOLT AS PER DRG.NO. MCT-1059 FOR TELE.SIGHT MK-III

SCREW MOUNTING BOLT AS PER DRG.NO. MCT-1059 FOR TELE.SIGHT MK-III

DRG.NO. MCT-1059

SCREW SHORT HOUSING AS PER DRG.NO.CQA(I)-792/37 FOR TELE.SIGHT MK-III

SCREW SHORT HOUSING AS PER DRG.NO.CQA(I)-792/37 FOR TELE.SIGHT MK-III

DRG.NO.CQA(I)-792/37

SCREW LONG HOUSING(GF-125181)FOR BRACKET TO MAT.SPEC.BS 970/EN.32H & ZINK PHOSPHATING FOR TELESCOPE 84MM RCL GUN. L/OUT-P-125/2 DRG. NO.-CQA(I)-792/31

SCREW LONG HOUSING(GF-125181)FOR BRACKET TO MAT.SPEC.BS 970/EN.32H & ZINK PHOSPHATING FOR TELESCOPE 84MM RCL GUN. L/OUT-P-125/2 DRG. NO.-CQA(I)-792/31

DRG. NO.-CQA(I)-792/31

SCREW SPECIAL DRG.NO.2880

SCREW SPECIAL DRG.NO.2880

DRG.NO.2880

SPRING MOUNTING BOLT DRG NO. MCT-1057

SPRING MOUNTING BOLT DRG NO. MCT-1057

DRG NO. MCT-1057

PLANK PLATE FOR STABILIZER 1G46 LF NO 7440200747

PLANK PLATE FOR STABILIZER 1G46 LF NO 7440200747

AL8602479

LEVER FOR STABILIZER 1G46 LF NO 7440200744

LEVER FOR STABILIZER 1G46 LF NO 7440200744

AL8332245

PULLEY FOR STABILIZER 1G46 LF NO 7440200743

PULLEY FOR STABILIZER 1G46 LF NO 7440200743

LEVER TO DRG NO BL9185830 LF NO 7420112083

LEVER TO DRG NO BL9185830 LF NO 7420112083

BL9185830

HOOK SAFETY NO-3 TO DRG.NO. MCT-695/1, 7 SHEETS.

HOOK SAFETY NO-3 TO DRG.NO. MCT-695/1, 7 SHEETS.

DRG.NO. MCT-695/1, 7 SHEETS.

PIANO HINGE BRASS5/8" (16MM) OPENED WIDTH X5.5"LONG. ASPER IS-3818/1992 AS PER MCT DRG.NO. 1997/1.

PIANO HINGE BRASS5/8" (16MM) OPENED WIDTH X5.5"LONG. ASPER IS-3818/1992 AS PER MCT DRG.NO. 1997/1.

MCT DRG.NO. 1997/1.

RD HD BRASS RIVET 2.00MM DIA X 5.00 LONG FOR CAP BATTERY BOX ASSY. (IRDE-1066/SHT OR SIGHT UNIT CASED 102A.

RD HD BRASS RIVET 2.00MM DIA X 5.00 LONG FOR CAP BATTERY BOX ASSY. (IRDE-1066/SHT OR SIGHT UNIT CASED 102A.

PIN TAPER MS.1.5X8 MM FOR SUC IRDE-1132.

PIN TAPER MS.1.5X8 MM FOR SUC IRDE-1132.

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

1345-000429

• Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

POLYMER MAGAZINE ASSY.DRG.NO.RFISK.9923AR FOR 7.62MM ASSAULT RIFLE GHAATAK

POLYMER MAGAZINE ASSY.DRG.NO.RFISK.9923AR FOR 7.62MM ASSAULT RIFLE GHAATAK

RFISK.9923AR

SCREW DRIVER 150MM LONG INCLUDING HANDLE 4.5MM ROD DIA X 75MM ROD LENGTH OUT SIDE OF THE HANDLE TIP SIZE 5MM CONFORMING TO IS-844/1991 MAKE-GEDORE/TAPARIA/SEMATO NOTE:-SAMPLE IS REQUIRED ALONG WITH QUOTATION.

SCREW DRIVER 150MM LONG INCLUDING HANDLE 4.5MM ROD DIA X 75MM ROD LENGTH OUT SIDE OF THE HANDLE TIP SIZE 5MM CONFORMING TO IS-844/1991 MAKE-GEDORE/TAPARIA/SEMATO NOTE:-SAMPLE IS REQUIRED ALONG WITH QUOTATION.

CIRCLIP "C" 2.3 TO IS-3075.

CIRCLIP "C" 2.3 TO IS-3075.

MILD STEEL HINGE 2"

MILD STEEL HINGE 2"

SPLIT PIN STEEL 2 MM X15MM LONG CONFORMING TO IS-549/1974 REAFFIRMED 1991( PHOSPHATED)

SPLIT PIN STEEL 2 MM X15MM LONG CONFORMING TO IS-549/1974 REAFFIRMED 1991( PHOSPHATED)

PIN COTTER SPLIT 0.8X10MM FOR SIGHT DIAL STEEL

PIN COTTER SPLIT 0.8X10MM FOR SIGHT DIAL STEEL

NAILS WIRE 2"X12G IS-730

NAILS WIRE 2"X12G IS-730

SPRING WASER M3 [PHOSPHATE COATED] IS-6755

SPRING WASER M3 [PHOSPHATE COATED] IS-6755

Schedule No. S/5387/ Bonded Polyester Fleece OG/2009/TC-19 except Polyester Fleece shall be white

Schedule No. S/5387/ Bonded Polyester Fleece OG/2009/TC-19 except Polyester Fleece shall be white

DMSRDE/TEX-2/93/2 & Annexure A attached

DMSRDE/TEX-2/93/2 & Annexure A attached

WASHER FLAT, ZINC PLATED , STEEL, SIZE-2.9MM DIA IS:5369/1975

WASHER FLAT, ZINC PLATED , STEEL, SIZE-2.9MM DIA IS:5369/1975

WASHER SPRING TENSION SINGLE COIL TYPE "B" STEEL M4 IS-6735/1994

WASHER SPRING TENSION SINGLE COIL TYPE "B" STEEL M4 IS-6735/1994

PUNCHED WASHER M3 BRASS AS PER IS:2016

PUNCHED WASHER M3 BRASS AS PER IS:2016

WASHER LOCK,SPRING STEEL,INTERNALLY TOOTHED TYPE \"B\" 3.2MM

WASHER LOCK,SPRING STEEL,INTERNALLY TOOTHED TYPE \"B\" 3.2MM

ADRDE/SPEC/1980/5(a) & Annexure A

ADRDE/SPEC/1980/5(a) & Annexure A

Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1

Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1

• As per attached Manufacturing Technology Files

• as per attached Testing/Inspection facility Files

WASHER FLAT STEEL CADIMIUM PLATED SIZE-4.5

WASHER FLAT STEEL CADIMIUM PLATED SIZE-4.5

WASHER SPRING TENSION SINGLE COIL SIZE- M3.5 STEEL. CONFORMING TO IS-6735/1994

WASHER SPRING TENSION SINGLE COIL SIZE- M3.5 STEEL. CONFORMING TO IS-6735/1994

WASHER LOCK MULTI TOOTH TYPE 'B' STEEL NOMINAL SIZE 3.2 MM IS-5371

WASHER LOCK MULTI TOOTH TYPE 'B' STEEL NOMINAL SIZE 3.2 MM IS-5371

RIVET SOLID SNAP HD.2X7MM BRASS IS-2907

RIVET SOLID SNAP HD.2X7MM BRASS IS-2907

RIVET SNAP HD.1.6X7MM LONG IS-2155 [STEEL]

RIVET SNAP HD.1.6X7MM LONG IS-2155 [STEEL]

WOOD SCREW NO. 5 X 12 MM, CSK HEAD CONFIRMING TO IS:6760-1972, STEEL

WOOD SCREW NO. 5 X 12 MM, CSK HEAD CONFIRMING TO IS:6760-1972, STEEL

SCREW METRIC SLOTTED C S K HEAD COARSE PITCH M 2X6 LONG BRASS. CONFORMING TO IS-1365

SCREW METRIC SLOTTED C S K HEAD COARSE PITCH M 2X6 LONG BRASS. CONFORMING TO IS-1365

WOOD SCREW BRASS SLOTTED CSK HD.NO 5X15MM IS-6760

WOOD SCREW BRASS SLOTTED CSK HD.NO 5X15MM IS-6760

ROUND HEAD WOOD SCREW NO. 4X12 STEEL PHOSPHATE. IS-6739

ROUND HEAD WOOD SCREW NO. 4X12 STEEL PHOSPHATE. IS-6739

BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760

BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760

WOOD SCREW M.S.CSK HD 6GX3/8"

WOOD SCREW M.S.CSK HD 6GX3/8"

ALLEN HD.SCREW M6X20MM CAPSOCKET HEAD. TO SPECN. IS-2269 [MAKE-TVS/UNBRAKO/LPS]

ALLEN HD.SCREW M6X20MM CAPSOCKET HEAD. TO SPECN. IS-2269 [MAKE-TVS/UNBRAKO/LPS]

SCREW SOCKET CAP HEXAGONAL HEAD. STEEL M4X12 LONG CONFORMING TO IS-2269 MAKE-UNBRAKO/LPS/TVS.

SCREW SOCKET CAP HEXAGONAL HEAD. STEEL M4X12 LONG CONFORMING TO IS-2269 MAKE-UNBRAKO/LPS/TVS.

SCREW SLOTTED HEAD COURSE PITCH TYPE A, STEEL 4.8, SIZE-M1.6X6MM AS PER IS:1365-2005.

SCREW SLOTTED HEAD COURSE PITCH TYPE A, STEEL 4.8, SIZE-M1.6X6MM AS PER IS:1365-2005.

WOOD SCREW BRASS SIZE-1/2"X4GAUGE CSK HD AS PER IS-6760/1972

WOOD SCREW BRASS SIZE-1/2"X4GAUGE CSK HD AS PER IS-6760/1972

SCREW CAP SOCKET HEAD HEX.M3X8.STEEL8*8 MAKE-UNBRAKO/LPS/TVS.

SCREW CAP SOCKET HEAD HEX.M3X8.STEEL8*8 MAKE-UNBRAKO/LPS/TVS.

SCREW GRUB,CONICAL END,STEEL 6.6, M1.6X4 MM LONG AS PER IS:2388-1971.

SCREW GRUB,CONICAL END,STEEL 6.6, M1.6X4 MM LONG AS PER IS:2388-1971.

SCREW GRUB CONICAL END STEEL SIZE M2X3 MM LONG AS PER IS:2388-1971

SCREW GRUB CONICAL END STEEL SIZE M2X3 MM LONG AS PER IS:2388-1971

SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS:2388-1971 (6.6)

SCREW GRUB SLOTTED CONICAL END STEEL SIZE M3X3 MM LONG AS PER IS:2388-1971 (6.6)

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

SCREW GRUB SLOTTED CONICAL SIZE-M2X2 BRASS CONFIRMING TO IS-2388 MAKE-TVS/UNBRAKO/LPS

SCREW GRUB SLOTTED CONICAL SIZE-M2X2 BRASS CONFIRMING TO IS-2388 MAKE-TVS/UNBRAKO/LPS

SCREW GRUB FLAT END NON MAGNETIC BRASS SIZE BA 8 X 3.2 MM LONG AS PER IS:2388-1971 (MATERIAL BRASS FOR SCREW CONFIRM TO SPECIFICATION IS:319 TYPE-I )

SCREW GRUB FLAT END NON MAGNETIC BRASS SIZE BA 8 X 3.2 MM LONG AS PER IS:2388-1971 (MATERIAL BRASS FOR SCREW CONFIRM TO SPECIFICATION IS:319 TYPE-I )

SCREW GRUB NON MAGNETIC BRASS CONICAL END SIZE BA10X4.7 MM LONG AS PER IS:2388-1971 (MATERIAL BRASS FOR SCREW CONFIRM TO SPECIFICATION IS:319 TYPE-I )

SCREW GRUB NON MAGNETIC BRASS CONICAL END SIZE BA10X4.7 MM LONG AS PER IS:2388-1971 (MATERIAL BRASS FOR SCREW CONFIRM TO SPECIFICATION IS:319 TYPE-I )

SCREW GRUB SLOTTED C TYPE M 2.5X6 MM FINISH: CAD.PLATING, IS:2388, STEEL

SCREW GRUB SLOTTED C TYPE M 2.5X6 MM FINISH: CAD.PLATING, IS:2388, STEEL

SCREW METRIC SLOTTED C'SK.HD COARSE PITCH PRECISION M 1.6 X 6 LONG IS:1365 BRASS FOR PASSIVE NIGHT VISION GOGGLES

SCREW METRIC SLOTTED C'SK.HD COARSE PITCH PRECISION M 1.6 X 6 LONG IS:1365 BRASS FOR PASSIVE NIGHT VISION GOGGLES

RIVET FLAT HEAD STEEL M 2.5 X 8 MM LONG IS:2155 FOR CASE COLLMATOR SIGHTING.

RIVET FLAT HEAD STEEL M 2.5 X 8 MM LONG IS:2155 FOR CASE COLLMATOR SIGHTING.

CH.HD.SCREW BM 4X10 LONG,M.S FOR TNPO-168B.

CH.HD.SCREW BM 4X10 LONG,M.S FOR TNPO-168B.

RIVET COPPER CSK.HD. 1.6 X 6 MM LONG FOR S/DIAL 104A.

RIVET COPPER CSK.HD. 1.6 X 6 MM LONG FOR S/DIAL 104A.

RIVET COPPER CSK.HD.2MM X 6MM FOR SIGHT DIAL 104A.

RIVET COPPER CSK.HD.2MM X 6MM FOR SIGHT DIAL 104A.

PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S/DIAL 104A.

PIN CYLINDRICAL STEEL 2 H 8X6MM LONG FOR S/DIAL 104A.

SCREW METRIC SLOTTED CSK M2.5X6 MM LONG COARSE PITCH,PRECISION, IS:1365, STEEL FOR SIGHT DIAL 104A/GOGGLES PASSIVE NIGHT VISION.

SCREW METRIC SLOTTED CSK M2.5X6 MM LONG COARSE PITCH,PRECISION, IS:1365, STEEL FOR SIGHT DIAL 104A/GOGGLES PASSIVE NIGHT VISION.

SCREW GRUB END M2X2MM "C" TYPE BRASS FOR S/DIAL 104A. FINISH: CAD. PLATING. IS-2388

SCREW GRUB END M2X2MM "C" TYPE BRASS FOR S/DIAL 104A. FINISH: CAD. PLATING. IS-2388