WASHER TO DRG NO.MCT-1332/1

WASHER TO DRG NO.MCT-1332/1

DRG NO.MCT-1332/1

CAP BODY UPPER TO DRG NO.IRDE-2048/173

CAP BODY UPPER TO DRG NO.IRDE-2048/173

DRG NO.IRDE-2048/173

HEAD REST OPT. INST.TO DRG NO.MCT-3141 5 SHEETS

HEAD REST OPT. INST.TO DRG NO.MCT-3141 5 SHEETS

DRG NO.MCT-3141 5 SHEETS

WASHER TO DRG NO.IRDE-2048/87

WASHER TO DRG NO.IRDE-2048/87

DRG NO.IRDE-2048/87

COVER MIRROR TO DRG NO.IRDE-2051/63 MCT-1596

COVER MIRROR TO DRG NO.IRDE-2051/63 MCT-1596

DRG NO.IRDE-2051/63 MCT-1596

SYN. RUBBER SHEET 1.00MM SPECN.BS-2751- 3222 BA-50 NITRILE VARITY

SYN. RUBBER SHEET 1.00MM SPECN.BS-2751- 3222 BA-50 NITRILE VARITY

SYN.RUBBER SHEET 2.5MM THICK IND/TC/2437 [LATEST]

SYN.RUBBER SHEET 2.5MM THICK IND/TC/2437 [LATEST]

SYNTHETIC RUBBER NITRILE VARIETY BLACK IRHD-41.50 BS:2751,2.50 MM THICK.

SYNTHETIC RUBBER NITRILE VARIETY BLACK IRHD-41.50 BS:2751,2.50 MM THICK.

GASKET REAR CENTRAL MCT-1694

GASKET REAR CENTRAL MCT-1694

MCT-1694

GASKET WINDOW GLASS TO DRG NO. MCT-1690

GASKET WINDOW GLASS TO DRG NO. MCT-1690

DRG NO. MCT-1690

GASKET WINDOW LOWER TO DRG NO.IRDE 1808/ 10 MCT-1688

GASKET WINDOW LOWER TO DRG NO.IRDE 1808/ 10 MCT-1688

DRG NO.IRDE 1808/ 10 MCT-1688

GASKETTO DRG NO. IRDE-1808/7,MCT-1692

GASKETTO DRG NO. IRDE-1808/7,MCT-1692

DRG NO. IRDE-1808/7,MCT-1692

GASKET TO DRG. NO. MCT-2416 FOR DRIVERS DAY SIGHT CENTRAL.

GASKET TO DRG. NO. MCT-2416 FOR DRIVERS DAY SIGHT CENTRAL.

DRG. NO. MCT-2416

GASKET TO DRG NO.MCT-1691

GASKET TO DRG NO.MCT-1691

DRG NO.MCT-1691

GASKET TO DRG NO. IRDE 1809/13 MCT-2418 FOR DRIVERS DAY SIGHT SIDE.

GASKET TO DRG NO. IRDE 1809/13 MCT-2418 FOR DRIVERS DAY SIGHT SIDE.

DRG NO. IRDE 1809/13 MCT-2418

PAD CASING LOWER,DRG NO.IRDE-1810/13 A MCT-2152

PAD CASING LOWER,DRG NO.IRDE-1810/13 A MCT-2152

DRG NO.IRDE-1810/13 A MCT-2152

SYN. RUBBER SHEET 1/16"(1.6MM) THICK SMOOTH FINISH TO SPECN IND/TC/2437(L)

SYN. RUBBER SHEET 1/16"(1.6MM) THICK SMOOTH FINISH TO SPECN IND/TC/2437(L)

SYNTHETIC RUBBER SHHEET 5.00MM THICK.

SYNTHETIC RUBBER SHHEET 5.00MM THICK.

GASKET TO DRG NO. MCT-2896 (OLD MCT-1574)

GASKET TO DRG NO. MCT-2896 (OLD MCT-1574)

DRG NO. MCT-2896 (OLD MCT-1574)

A SET OF 8 COMPONENTS FOR HR BINO MCT-2922/1 (1/SET), MCT-2957/1 (1/SET) MCT-2958/1 (1/SET), MCT-2961/1 (1/SET) MCT-2962/1 (1/SET), MCT-2956/1 (1/SET) MCT-2955/1 (1/SET) MCT-2944/1 (2/SET)

A SET OF 8 COMPONENTS FOR HR BINO MCT-2922/1 (1/SET), MCT-2957/1 (1/SET) MCT-2958/1 (1/SET), MCT-2961/1 (1/SET) MCT-2962/1 (1/SET), MCT-2956/1 (1/SET) MCT-2955/1 (1/SET) MCT-2944/1 (2/SET)

MCT-2922/1 (1/SET), MCT-2957/1 (1/SET) MCT-2958/1 (1/SET), MCT-2961/1 (1/SET) MCT-2962/1 (1/SET), MCT-2956/1 (1/SET) MCT-2955/1 (1/SET) MCT-2944/1 (2/SET)

A SET OF 10 COMPONENTS FOR HR BINO MCT-2963/1 (1/SET) , MCT-2948/1 (1/SET) MCT-2951/1 (1/SET), MCT-2952/1 (1/SET) MCT-2927/1 (1/SET), MCT-2930/1 (1/SET) MCT-2960/1 (2/SET), MCT-2932/1 (2/SET) MCT-2934/1 (2/SET), MCT-2920/1 (2/SET)

A SET OF 10 COMPONENTS FOR HR BINO MCT-2963/1 (1/SET) , MCT-2948/1 (1/SET) MCT-2951/1 (1/SET), MCT-2952/1 (1/SET) MCT-2927/1 (1/SET), MCT-2930/1 (1/SET) MCT-2960/1 (2/SET), MCT-2932/1 (2/SET) MCT-2934/1 (2/SET), MCT-2920/1 (2/SET)

MCT-2963/1 , MCT-2948/1 MCT-2951/1 , MCT-2952/1 MCT-2927/1 , MCT-2930/1 MCT-2960/1 , MCT-2932/1 MCT-2934/1 , MCT-2920/1

RING RETANING AS PER DRG.NO. MCT-2960/1 FOR HR BINO 8X30R.

RING RETANING AS PER DRG.NO. MCT-2960/1 FOR HR BINO 8X30R.

DRG.NO. MCT-2960/1

BIPOD-MAKE-HARRIS, MODEL-HBLS ROTAPOD-MAKE-MIM, MODEL-RBA-1

BIPOD-MAKE-HARRIS, MODEL-HBLS ROTAPOD-MAKE-MIM, MODEL-RBA-1

DRG. NO. 2440A20008

DRG. NO. 2440A20008

EMPTY CANISTER ASSEMBLY FOR M2A2. 1)CANISTER WITH TUBE ASSY. DRG. NO. 2439A12002. QTY.:1NO.DC 36773-A DT.10-8-01 2) DISC CLOSSING DRG.NO.2439A30003.QTY.:1NO.DC 36773-A DT.10-8-01 3) SLEEVE DRG.NO.2439A12007.QTY.:1 NO.DC 36773-A DT.10-8-01 4) CANISTER INTERNAL DRG.NO.2439A12010.QTY.:1 NO.DC NO.36773-A

EMPTY CANISTER ASSEMBLY FOR M2A2. 1)CANISTER WITH TUBE ASSY. DRG. NO. 2439A12002. QTY.:1NO.DC 36773-A DT.10-8-01 2) DISC CLOSSING DRG.NO.2439A30003.QTY.:1NO.DC 36773-A DT.10-8-01 3) SLEEVE DRG.NO.2439A12007.QTY.:1 NO.DC 36773-A DT.10-8-01 4) CANISTER INTERNAL DRG.NO.2439A12010.QTY.:1 NO.DC NO.36773-A

DRG. NO. 2439A12002, DRG.NO.2439A30003. DRG.NO.2439A12007, DRG.NO.2439A12010

ALUMINUM STRIP SIZE : 127MM WIDE X 0.1MM THIC (5" X 0.004" TH) SPECN IS: 737 2008 ( 4TH REV) RA 2010 DESIGNATION NO - 19000, CONDITION "O"

ALUMINUM STRIP SIZE : 127MM WIDE X 0.1MM THIC (5" X 0.004" TH) SPECN IS: 737 2008 ( 4TH REV) RA 2010 DESIGNATION NO - 19000, CONDITION "O"

LEAD THIOCYANATE AR TO PASS 45 MICRON TO SPECN.NO.JSS-6810-47: 2008 REVISION NO.2.

LEAD THIOCYANATE AR TO PASS 45 MICRON TO SPECN.NO.JSS-6810-47: 2008 REVISION NO.2.

HARDNER EH 408(5 KG PACK)

HARDNER EH 408(5 KG PACK)

BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05

BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05

A.P.C. NO. 11 ( WATER PROOFING CEMENT COMPOSITION)RD-1154 TO SPECN. J.S.S.-8030-24 2011 REV NO.2. DC 5086-ME DT. 06/08/2012.

A.P.C. NO. 11 ( WATER PROOFING CEMENT COMPOSITION)RD-1154 TO SPECN. J.S.S.-8030-24 2011 REV NO.2. DC 5086-ME DT. 06/08/2012.

GUN POWDER MEALED TO SPECIFICATION : JSS-1376-05-2014 (REVISION NO.3).DS-CAT NO.1376-000 036 DC NO. 5294-ME, DT. 16-12-2014

GUN POWDER MEALED TO SPECIFICATION : JSS-1376-05-2014 (REVISION NO.3).DS-CAT NO.1376-000 036 DC NO. 5294-ME, DT. 16-12-2014

ZIRCONIUM NICKEL ALLOY POWDERED, TYPE-I 70:30 PARTICLE SIZE 3 TO 5 MICRON TO SPECN.NO. MIL Z 11410A.

ZIRCONIUM NICKEL ALLOY POWDERED, TYPE-I 70:30 PARTICLE SIZE 3 TO 5 MICRON TO SPECN.NO. MIL Z 11410A.

CHARCOAL TYPE II TO SPECN. JSS-9110-144-2013 REV-I DC - 5189 ME - DATED 19.03.2014 DS-CAT NO-9110-000062.

CHARCOAL TYPE II TO SPECN. JSS-9110-144-2013 REV-I DC - 5189 ME - DATED 19.03.2014 DS-CAT NO-9110-000062.

ZIRCONIUM NICKEL ALLOY POWDERED 30 : 70 TYPE-II TO SPECN. NO-MIL-Z-11410-A

ZIRCONIUM NICKEL ALLOY POWDERED 30 : 70 TYPE-II TO SPECN. NO-MIL-Z-11410-A

CARTON BOARD FOR AMMUNITION(SIZE 787 X558.9 X 0.5 MM) TO JSS 8135 - 15 : 2016 (REV NO 3 ) DC 5471-ME DT.24/09/2016] [D S CAT NO.8135-000142

CARTON BOARD FOR AMMUNITION(SIZE 787 X558.9 X 0.5 MM) TO JSS 8135 - 15 : 2016 (REV NO 3 ) DC 5471-ME DT.24/09/2016] [D S CAT NO.8135-000142

TOLUENE AR GRADE IN 2.5 LITER BOTTLE OF MERCK/QUALIGEN/LOBA/] SRL MAKE.

TOLUENE AR GRADE IN 2.5 LITER BOTTLE OF MERCK/QUALIGEN/LOBA/] SRL MAKE.

WASHER TO DRG.NO.155 -1120. DC 36792 A DT.01/11/2001. INDIGENOUS MATL SPECN NO. IND/ME-914 (PROV), GRADE E TO ACRYLONITRILE BUTADIENE RUBBER COMPOUND [DC-3496 ME DT 6.2.98.

WASHER TO DRG.NO.155 -1120. DC 36792 A DT.01/11/2001. INDIGENOUS MATL SPECN NO. IND/ME-914 (PROV), GRADE E TO ACRYLONITRILE BUTADIENE RUBBER COMPOUND [DC-3496 ME DT 6.2.98.

SEAL STEEL TO DRG.NO.6390155 DC 35565A TO SPECN.IS-5872-1990] (2ND REV) SUITABLY BLUED OR RUST PROOFED FOR STRAP STEEL [19MM WIDE AND 0.8MM THICK. REAFFIRMED 2015.

SEAL STEEL TO DRG.NO.6390155 DC 35565A TO SPECN.IS-5872-1990] (2ND REV) SUITABLY BLUED OR RUST PROOFED FOR STRAP STEEL [19MM WIDE AND 0.8MM THICK. REAFFIRMED 2015.

SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98.

SPACER TO DRG.NO. 2439A00016 DC 36552A DATED 24.4.99.MATL ACRYLONITRILE BUTADIENE RUBBER COMPOUND GRADE "D" [TO SPECN.NO.IND/ME/914(PROV). DC 3496ME DTD. 6/2/98.

[PAPER CORRUGATED AMMUNITION SINGLE FACED, COARSE FLUTE SIZE 660MM WIDE TO SPECN.NO. JSS-8135-08-2014(REV.NO.4) DS-CAT NO-8135-000001.

[PAPER CORRUGATED AMMUNITION SINGLE FACED, COARSE FLUTE SIZE 660MM WIDE TO SPECN.NO. JSS-8135-08-2014(REV.NO.4) DS-CAT NO-8135-000001.

ALUMINIUM FOIL TO SPECN-IS:737:2008 (REV NO.4) DESIG 40800 SOFT ANNEALLED, TEMPERED CONDITION '0' 250MM WIDE X 0.04MM THICK.

ALUMINIUM FOIL TO SPECN-IS:737:2008 (REV NO.4) DESIG 40800 SOFT ANNEALLED, TEMPERED CONDITION '0' 250MM WIDE X 0.04MM THICK.

STEEL STRAP RUST PROOF TO SPECN. IS 5872-1990 (2ND REV.), REAFF 2015, 19MM WIDE AND 0.8MM THICK.

STEEL STRAP RUST PROOF TO SPECN. IS 5872-1990 (2ND REV.), REAFF 2015, 19MM WIDE AND 0.8MM THICK.

AMMUNITION PROTECTIVE COMPOSITION NO.1 (CEMENT RD-1158 G.) TO SPECN. JSS : 8030-16-2015 (REVISION NO.04) D S CAT NO.8030-000 034. D C NO.5398 ME DATE : 01/02/2016

AMMUNITION PROTECTIVE COMPOSITION NO.1 (CEMENT RD-1158 G.) TO SPECN. JSS : 8030-16-2015 (REVISION NO.04) D S CAT NO.8030-000 034. D C NO.5398 ME DATE : 01/02/2016

ZIRCONIUM POWDER FOR USE IN EXPLOSIVE AND PYROTECHNIC INDUSTRY TO SPECN. IS:12437-1988 REAFFIRMED 2005 PARTICLE SIZE 5 TO 10 MICRON.

ZIRCONIUM POWDER FOR USE IN EXPLOSIVE AND PYROTECHNIC INDUSTRY TO SPECN. IS:12437-1988 REAFFIRMED 2005 PARTICLE SIZE 5 TO 10 MICRON.

SILICON GREASE TO SPECN.NO. IND/ME 989 : 2016 DC-6016-ME DATED 03/02/2017 DSCAT NO.8030-000235

SILICON GREASE TO SPECN.NO. IND/ME 989 : 2016 DC-6016-ME DATED 03/02/2017 DSCAT NO.8030-00023

CQA (A) 2345(c) [DRG. NO.ARDE 2222 Det 13, ITV-261]

CQA (A) 2345(c) [DRG. NO.ARDE 2222 Det 13, ITV-261]

CQA(A) 2345(c) Drg. No. ARDE 2222 PT.NO. ITV 259

CQA(A) 2345(c) Drg. No. ARDE 2222 PT.NO. ITV 259

DRG NO ARDE 2222 DET 12 PT NO ITV 260 SPECN.NO.CQA(A) 2345 (C)

DRG NO ARDE 2222 DET 12 PT NO ITV 260 SPECN.NO.CQA(A) 2345 (C)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

1345-000429

• Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

BOW SHACKLE TO DRG.NO. 05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG.

BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG.

DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21

CQA (A) 2345(c) [DRG. NO.ARDE 2222 Det 13, ITV-261]

CQA (A) 2345(c) [DRG. NO.ARDE 2222 Det 13, ITV-261]

DRG. NO. ARDE 2285 DET. NO. 1&2 PART NO. 276 & 177

DRG. NO. ARDE 2285 DET. NO. 1&2 PART NO. 276 & 177

04-13-2452-148

04-13-2452-148

IS – 8063- 1976

IS – 8063- 1976

CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2

CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2

JSS 1376-05:2005 (REV. NO. 2)

JSS 1376-05:2005 (REV. NO. 2)

JSS 6820 - 02 : 2004

JSS 6820 - 02 : 2004

DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

DRG.NO. ARDE-2174, SHT NO.3, PT.NO. ISV 553 A, DC NO. 35907 A , DT. 09/02/1995.

FASTENER SET,TURN LOCK DRG NO.MCT-1189/1

FASTENER SET,TURN LOCK DRG NO.MCT-1189/1

DRG NO.MCT-1189/1

INVESTMENT CASTING FOR GEAR TO DRG NO. ODD/C/962/1

INVESTMENT CASTING FOR GEAR TO DRG NO. ODD/C/962/1

DRG NO. ODD/C/962/1

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

SCREW GRUB SLOOTED CONICAL END M2X3 LONG STEEL WITH CADMIUM PLATING AS PER IS-2388 MAKE-LPS

CQA(A) 2328(c), Drg. No. ARDE 2064 Det 14 Pt.No. ITV 124

CQA(A) 2328(c), Drg. No. ARDE 2064 Det 14 Pt.No. ITV 124

JSS 1376-05 :1994

JSS 1376-05 :1994

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DRG NO.HEMRL/IGN/PINAKA/DRG 006 DET.NO.4,5,6 & 16.

DRG. NO. 2907A30011

DRG. NO. 2907A30011

IS-2307-2004

IS-2307-2004

CQA(A) 4921

CQA(A) 4921

DRG.NO. 155-1210

DRG.NO. 155-1210

ETHYL CELLULOSE (N-200) TO PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

PROVISIONAL SPECIFICATION ERDL/TRIM/IGN/RM/2

SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A ,

SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG.NO. MCT-2871/1.FOR DAY SIGHT TELE.5.56MM LMG(INSAS) CASED 101A ,

DRG.NO. MCT-2871/1

ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE.

ASSY.OF SCREW,SPECIAL,ADJUSTING WITH BUSH TO DRG. NO.MCT-2650/3,FOR TELE.5.56 RIFLE.

MCT-2650/3

SCREW LONG HOUSING AS PER DRG.NO.CQA(I)-792/31 FOR TELE.SIGHT MK-III

SCREW LONG HOUSING AS PER DRG.NO.CQA(I)-792/31 FOR TELE.SIGHT MK-III

DRG.NO.CQA(I)-792/31

SCREW ,(SLIDE) AS PER DRG.NO. CQA(I)-792/27 FOR TELE.SIGHT MK-III

SCREW ,(SLIDE) AS PER DRG.NO. CQA(I)-792/27 FOR TELE.SIGHT MK-III

DRG.NO. CQA(I)-792/27

LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III

LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III

DRG.NO. CQA(I)-793/28

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

DRG.NO.MCT-1079

SCREW MOUNTING BOLT AS PER DRG.NO. MCT-1059 FOR TELE.SIGHT MK-III

SCREW MOUNTING BOLT AS PER DRG.NO. MCT-1059 FOR TELE.SIGHT MK-III

DRG.NO. MCT-1059

SCREW SHORT HOUSING AS PER DRG.NO.CQA(I)-792/37 FOR TELE.SIGHT MK-III

SCREW SHORT HOUSING AS PER DRG.NO.CQA(I)-792/37 FOR TELE.SIGHT MK-III

DRG.NO.CQA(I)-792/37

SCREW LONG HOUSING(GF-125181)FOR BRACKET TO MAT.SPEC.BS 970/EN.32H & ZINK PHOSPHATING FOR TELESCOPE 84MM RCL GUN. L/OUT-P-125/2 DRG. NO.-CQA(I)-792/31

SCREW LONG HOUSING(GF-125181)FOR BRACKET TO MAT.SPEC.BS 970/EN.32H & ZINK PHOSPHATING FOR TELESCOPE 84MM RCL GUN. L/OUT-P-125/2 DRG. NO.-CQA(I)-792/31

DRG. NO.-CQA(I)-792/31

SCREW SPECIAL DRG.NO.2880

SCREW SPECIAL DRG.NO.2880

DRG.NO.2880

SPRING MOUNTING BOLT DRG NO. MCT-1057

SPRING MOUNTING BOLT DRG NO. MCT-1057

DRG NO. MCT-1057