ARGON GAS FOR OPTICAL EMISSION SPECTROMETER INSTRUMENT WITH HIGH PURITY GRADE -I (MINIMUM PURITY 99.9993%) AND SUPPLY TO BE MADE IN OFAJ CYLINDER OF CAPACITY 7.00 CU.MTR

ARGON GAS FOR OPTICAL EMISSION SPECTROMETER INSTRUMENT WITH HIGH PURITY GRADE -I (MINIMUM PURITY 99.9993%) AND SUPPLY TO BE MADE IN OFAJ CYLINDER OF CAPACITY 7.00 CU.MTR

INDUSTRIAL L.P.G. IN 19 KGS CYLINDER (FIRM SHOULD SUPPLY GAS INFIRMS OWN CYLENDER ON RETURNABLE BASIS. NO CHARGE WILL BE PAID FOR EMPTY CYLENDER.)

INDUSTRIAL L.P.G. IN 19 KGS CYLINDER (FIRM SHOULD SUPPLY GAS INFIRMS OWN CYLENDER ON RETURNABLE BASIS. NO CHARGE WILL BE PAID FOR EMPTY CYLENDER.)

ALUMINIUM WIPER TRAY FOR DIA 400 MM BILLET AS PER DRG. NO. FDY-237/1.

ALUMINIUM WIPER TRAY FOR DIA 400 MM BILLET AS PER DRG. NO. FDY-237/1.

ALUMINIUM WIPER TRAY FOR 400 MM DIA BILLET AS PER DRG. NO. FDY-237/2.

ALUMINIUM WIPER TRAY FOR 400 MM DIA BILLET AS PER DRG. NO. FDY-237/2.

ALUMINIUM WIRE 9MM DIA. WITH MINIMUM PURITY 99.6%,IN COILED FORM AND IN ANNEALED CONDITION. WEIGHT OF COIL MINIMUM 250 KG. HARDNESS- 45 BHN MAX.

ALUMINIUM WIRE 9MM DIA. WITH MINIMUM PURITY 99.6%,IN COILED FORM AND IN ANNEALED CONDITION. WEIGHT OF COIL MINIMUM 250 KG. HARDNESS- 45 BHN MAX.

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

MCT- 2954/1, 2976/1

OPT.GLASS SLAB EDF-648338

OPT.GLASS SLAB EDF-648338 SLAB SIZE 300-400x120-180x30-75 mm

OPT. GLASS SLAB EDF-651336

OPT. GLASS SLAB EDF-651336 SLAB SIZE 300-400x120-180x 30-75 mm IS-1400

OPT.GLASS BSC-510644 SLAB SIZE: 300-400 X 120-180 X 30-75 MM IS:1400-1960, STRIAE GRADE A INCLUSION GRADE SMALL-B,FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH SUPPLY.

OPT.GLASS BSC-510644 SLAB SIZE: 300-400 X 120-180 X 30-75 MM IS:1400-1960, STRIAE GRADE A INCLUSION GRADE SMALL-B,FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH SUPPLY.

OPT.GLASS BSC-510644 SLAB SIZE: 300-400 X 120-180 X 30-75 MM IS:1400-1960, STRIAE GRADE A INCLUSION GRADE SMALL-B,FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.SUPPLIER SHALL PROVIDE MELT DATA SHEET ALONG WITH SUPPLY.

GLASS SLAB BK-7 BSC- 517642

GLASS SLAB BK-7 BSC- 517642 SLAB SIZE : 300-400x120-180x30-75mm AS PER SPECN IS- 1400/1960

INDUCTION HARDENING OF GUN MANTELET ASSY BMP

INDUCTION HARDENING OF GUN MANTELET ASSY BMP

675-51-CD162CB.

SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LENS NO. IX IRDE-2023/6, 1/SET (7) LENS NO.X DRG. NO. IRDE-2023/7, 2/SET, 8) LENS NO.XI & XII DRG. NO. IRDE-2023/8, 2/SET.

SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LENS NO. IX IRDE-2023/6, 1/SET (7) LENS NO.X DRG. NO. IRDE-2023/7, 2/SET, 8) LENS NO.XI & XII DRG. NO. IRDE-2023/8, 2/SET.

SET OF OPTICS FOR GNVP CONSISTING OF FOLLOWING: (1) LENS NO.I IRDE-2023/1,1/SET,(2) LENS NO. II & III DRG. IRDE-2023/2,1/SET, (3) LENS NO. IV & V IRDE-2023/3, 1/SET (4) LENS NO. VI IRDE-2023/4, 1/SET, (5) LENS NO.VII & VIII IRDE-2023/5, 1/SET, (6) LE

CASE CARRYING FOR GOGGLE NIGHT VISION PA SSIVE (COMPLETE) TO DRG NO.MCT-1632/1 COMPRISING OF DRG.MCT-1633/2 MCT-2273/1,MCT-2274/1,MCT-1645/1,MCT-1646/1 , MCT-1369,1634/1,1636/1,1637/1,1638/1,1639/1 1640,1635/1 & MCT-1617/1.

CASE CARRYING FOR GOGGLE NIGHT VISION PA SSIVE (COMPLETE) TO DRG NO.MCT-1632/1 COMPRISING OF DRG.MCT-1633/2 MCT-2273/1,MCT-2274/1,MCT-1645/1,MCT-1646/1 , MCT-1369,1634/1,1636/1,1637/1,1638/1,1639/1 1640,1635/1 & MCT-1617/1.

DRG NO.MCT-1632/1 COMPRISING OF DRG.MCT-1633/2 MCT-2273/1,MCT-2274/1,MCT-1645/1,MCT-1646/1 , MCT-1369,1634/1,1636/1,1637/1,1638/1,1639/1 1640,1635/1 & MCT-1617/1.

BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623.

BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623.

STRAP WEB WITH BUCKEL"A"WITH BUCKEL3/4" WIDE X 21" LONG

STRAP WEB WITH BUCKEL"A"WITH BUCKEL3/4" WIDE X 21" LONG

COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED)

COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED)

DRG NO. MCT-1461

CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.

CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.

DRG.ODD/M/2546/2

CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.

CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.

DRG. NO. MCT-1463/1

CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY)

CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY)

DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1

CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1

CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1

DRG NO.CWC-246

SILICAGEL BAG SIZE 4"X3".

SILICAGEL BAG SIZE 4"X3".

COVER CANVAS 4 A TO DRG.NO.MCT-2759

COVER CANVAS 4 A TO DRG.NO.MCT-2759

DRG.NO.MCT-2759

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

• MSME

• DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

Threaded Piston Extension for CQB DRG. No. 1901 01 01 00 03 002 00DC. Item code (7012670015)

Threaded Piston Extension for CQB DRG. No. 1901 01 01 00 03 002 00DC. Item code (7012670015)

DRG. No. 1901 01 01 00 03 002 00DC.

• Machining

• 1)Chemical & Mechanical properties as per std. given drawing /Specification.
• 2)Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB

BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB

DRG NO. 0204-03-03-02-15-000-00DB

SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10

SPRING HELICAL COMPRESSION EXTRACTOR (OUTER) TO DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114 DC(I)NO-26521-SA DTD-12.07.10

DRG. NO. ARDE/SK- 3143/73, DS CAT NO.5360-007114

SPRING COCKING HANDLE FOR JVPC DRG.NO.0204-03-02-00-01-009-00XA

SPRING COCKING HANDLE FOR JVPC DRG.NO.0204-03-02-00-01-009-00XA

DRG.NO.0204-03-02-00-01-009-00XA

Spring Recoil for JVPC, Drg. No. 0204-03-02-00-06-004-00DA

Drg. No. 0204-03-02-00-06-004-00DA

Drg. No. 0204-03-02-00-06-004-00DA

Spring Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-019-00DA

Drg. No. 0204-03-02-02-18-019-00DA

Drg. No. 0204-03-02-02-18-019-00DA

Spring Trigger Front for JVPC, Drg No. 0204-03-02-02-18-002-00DD

Drg No. 0204-03-02-02-18-002-00DD

Drg No. 0204-03-02-02-18-002-00DD

Spring sear safety for JVPC Drg No. 0204-03-02-02-18-009-00DA

Drg No. 0204-03-02-02-18-009-00DA

Drg No. 0204-03-02-02-18-009-00DA

Spring Sear for JVPC Drg No. 0204-03-02-02-18-015-00DB

Drg No. 0204-03-02-02-18-015-00DB

Drg No. 0204-03-02-02-18-015-00DB

Spring Hammer for JVPC drg no. 0204-03-02-02-18-012-00DA

Spring Hammer for JVPC

0204-03-02-02-18-012-00DA

Steel flat 36mm x 62mm for JVPC BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B

Sight Leaf for JVPC 5.56 mm Through MIM Route DRG No.0204-03-04-00-01-006-00DA.

Sight Leaf for JVPC 5.56 mm Through MIM Route DRG No.0204-03-04-00-01-006-00DA.

DRG No.0204-03-04-00-01-006-00DA.

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA

SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA

DRG.NO.0204-03-02-00-01-008-00XA

3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA

3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA

DRG.NO.204-04-03-00-00-000-00DA

Steel wire Spring for JVPC steel to IS:4454(Part-I) 2001 DH

Steel wire Spring for JVPC steel to IS:4454(Part-I) 2001 DH

Steel wire Spring for JVPC steel to IS:4454(Part-I) 2001 DH

Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)

Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)

DRG No. 0204-03-04-00-01-003-00DA

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

DRG No.0204-03-04-02-14-021-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Trigger Rear for JVPC through MIM Route Drg No 0204 03 02 02 18 013 OODC (Item Code- 7012470201)

Trigger Rear for JVPC through MIM Route Drg No 0204 03 02 02 18 013 OODC (Item Code- 7012470201)

Drg No 0204 03 02 02 18 013 OODC

TRIGGER GUARD MOULDING for JVPC DRG. NO.0204-03-03-16-26-000-00DD

TRIGGER GUARD MOULDING for JVPC DRG. NO.0204-03-03-16-26-000-00DD

DRG. NO.0204-03-03-16-26-000-00DD

TRIGGER FRONT DRG NO. 0204 03 02 18 001 00DC FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 18 001 00DC FOR JVPC 5.56MM (MIM ROUTE)

Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route)

Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route)

DRG No. 0204 03 02 00 -01-004-00DC

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

• Chemical and mechanical properties as per std. given drawing.

• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

STOPPER FRONT SPRING RECOIL FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material

AS PER SPECN.

SPRING REAR SIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-00-01-012-00DA

SPRING REAR SIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-00-01-012-00DA

DRG.NO.0204-03-02-00-01-012-00DA

Spring Plunger Wheel Lock for JVPC, Drg. No.0204-03-02-02-18-005-00DA

Spring Plunger Wheel Lock for JVPC, Drg. No.0204-03-02-02-18-005-00DA

Drg. No.0204-03-02-02-18-005-00DA

SPRING PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-02-36-002-OODA

SPRING PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-02-36-002-OODA

DRG.NO.0204-03-02-02-36-002-OODA

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

DRG.NO.0204-03-02-03-22-001-00DA

SPRING PIN LOCKING HAND GUARD FOR JVPC DRG NO. 0204-03-02-00-13-002-00DA

SPRING PIN LOCKING HAND GUARD FOR JVPC DRG NO. 0204-03-02-00-13-002-00DA

DRG NO. 0204-03-02-00-13-002-00DA

Spring Pin locking Cup and Pistol Grip for JVPC

Spring Pin locking Cup and Pistol Grip for JVPC

0204-03-02-00-110-02-00DA

SPRING LOCKING PIN TRIGGER MECHANISM FOR JVPC 5.56MM DRG.NO.0204-03-02-02-18-021-00DA

SPRING LOCKING PIN TRIGGER MECHANISM FOR JVPC 5.56MM DRG.NO.0204-03-02-02-18-021-00DA

0204-03-02-02-18-021-00DA

• Spring manufacturing machine

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing.

JVPC 5.56mm Drg. No. 0204-03-02-02-18-021-00DA

JVPC 5.56mm Drg. No. 0204-03-02-02-18-021-00DA

Drg. No. 0204-03-02-02-18-021-00DA

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

• MIM ROUTE
• Chemical and mechanical properties as per std. given drawing.

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Slide Cocking Handle through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODE Item Code 7012470177

Slide Cocking Handle through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODE Item Code 7012470177

Drg No 0204 03 02 00 01 003 OODE

SIGHT LEAF FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO.0204 03 02 00 01 008 00DB

DRG.NO.0204 03 02 00 01 008 00DB

Sheet 1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

Sear Safety through MIM route for JVPC as per Drg No 0204 03 02 02 18 008 OODD Item Code 7012470186

Sear Safety through MIM route for JVPC as per Drg No 0204 03 02 02 18 008 OODD Item Code 7012470186

sear for JVPC

sear for JVPC

Drg No. 0204-03-02-02-18-014-00DE

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DD

ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DD

DRG.NO.0204-03-02-00-06-003-00DD

REAR SIGHT DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)

PLUNGER WHEEL LOCK DRG NO. 0204 03 02 02 18 006 00DF FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 02 18 006 00DF FOR JVPC 5.56MM

PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA

DRG.NO. 0204 03 03 02 36 003 00DA

PLUNGER BUTT LOCK DRG NO. 0204 03 02 04 14 001 00DF FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 04 14 001 00DF FOR JVPC 5.56MM

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

DRG NO. 0204-03-02-19-31-000-00DG

PIN TRIGGER, HAMMER AND SEAR SAFETY DRG.NO. 0204-03-02-02-18 -003-00DA.

PIN TRIGGER, HAMMER AND SEAR SAFETY DRG.NO. 0204-03-02-02-18 -003-00DA.

DRG.NO. 0204-03-02-02-18 -003-00DA.

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB

PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB

DRG.NO.0204 03-02-00-13-001-00DB

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB

PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB

DRG.NO.0204-03-02-00-11-001-00DB

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA

PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017-00DA

DRG.NO. 0204-03-02-02-18-017-00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)

DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM

MUZZLE CAP MOULDING FOR JVPC

MUZZLE CAP MOULDING FOR JVPC

Drg. 0204-04-04-00-00-001-00DA

MOUNTING RAIL for JVPC 5.56 MM DRG. NO. 0204-03-02-15-28-001-00DF

MOUNTING RAIL

DRG. NO. 0204-03-02-15-28-001-00DF

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm as per given sketch from provided material size 90x90x64 MM by SAF

BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108

SK-JVPC-108/

MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.

MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.

Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB

Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB

DRG No. 0204 03 02 37 39 002 00 DB

LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM