GUIDE PISTON EXTENSION TO DRG NO.AKC-02/3*1(IN FINISHED CONDFOR AMOGH 5.56MM.

GUIDE PISTON EXTENSION TO DRG NO.AKC-02/3*1(IN FINISHED CONDFOR AMOGH 5.56MM.

GUIDE ASSEMBLY-2 TO DRG NO.AKC 09/2*. FOR CARBINE 5.56MM

GUIDE ASSEMBLY-2 TO DRG NO.AKC 09/2*. FOR CARBINE 5.56MM

DRG NO.AKC 09/2*

GUIDE ASSEMBLY-1 TO DRG NO.AKC-09/3*. FOR CARBINE 5.56MM.

GUIDE ASSEMBLY-1 TO DRG NO.AKC-09/3*. FOR CARBINE 5.56MM.

DRG NO.AKC-09/3*.

GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010

GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010

ARDE SK- 2689/80

• Machining

• Chemical & Mechanical properties as per std. Given drawing.
• Dimensional Inspection ,for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

DS CAT NO.1005-560701

• as per attached document

• as attached document

GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),

GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.-1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET),

As per drawing

GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.

GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.

DRG NO./DS CAT NO. 1005-560046

• Machining & Assy.

• As per attached document

Case Carrying FRP IRDE 2610

Case Carrying FRP IRDE 2610

• NOT MENTIONED IN ANNEXURE

• NOT MENTIONED IN ANNEXURE

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007

DS CAT NO.1005-007775

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007

GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007

DS CAT NO.1005-007775

GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.

GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.

DS CAT NO. 1005-560706

GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.

GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.

DRG NO AKC 11

FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16

FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16

DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737

FORE SIGHT DRG NO AKC 01/6 IN FINISHED CONDITION. FOR CARBINE 5.56MM

FORE SIGHT DRG NO AKC 01/6 IN FINISHED CONDITION. FOR CARBINE 5.56MM

DRG NO AKC 01/6

Flash Absorber to DS CAT No. 1005-007739 in finished condition

Flash Absorber to DS CAT No. 1005-007739 in finished condition

DS CAT No. 1005-007739

EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016.

DS.CAT.NO. 26923-SA DATED-29.08.2016.

ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY

ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY

• As per attachment

• As per attachment

ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983

ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983

• As per attachment

• As per attachment

EJECTOR SMALLARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16

EJECTOR SMALLARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16

DS CAT. NO. 1005-007905

DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.

DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.

CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM.

CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM.

DRG NO. AKC-02/1

COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751

COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751

DS CAT NO.1005 - 560751

COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56MM.

COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56MM.

DRG NO. AKC-08/2*

COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12

COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12

,DS CAT NO. 1005-560561

• Machining & Assy.

• As per attachment of manufacturing and technology

COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY

COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY

COCKING HANDLE TO DRG NO.AKC-08/8* FOR CARBINE5.56MM IN FINISHED CONDITION.

COCKING HANDLE TO DRG NO.AKC-08/8* FOR CARBINE5.56MM IN FINISHED CONDITION.

DRG NO.AKC-08/8*

CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2

CHEST RIFLE 5.56MM WOODEN CAPACITY 10 RIFLES WITH ACCESSORIES TO DRG NO CQA(SA)SK-625 D.S.CAT NO.1005-560403 SHT NO. 1&2 DC(I) NO-26483 SA DT 11-01-10 FOR SHT-1 DC(I) NO-26526 SA DT 22-07-10 FOR SHT-2

D.S.CAT NO.1005-560403

CHANNEL RIGHT TO DRG NO. AKC-03/7BL FOR CARBINE 5.56MM.

CHANNEL RIGHT TO DRG NO. AKC-03/7BL FOR CARBINE 5.56MM.

CHANNEL LEFT TO DRG NO. AKC-03/6BL FOR CARBINE 5.56MM.

AS PER DRG.

DRG NO. AKC-03/6BL

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X150 MM THICK (SINGLE NATO) WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X150 MM THICK (SINGLE NATO) WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X10 MM THICK WITH TYPE-1 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X10 MM THICK WITH TYPE-1 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X25 MM THICK (MILD STEEL TRIPLE NATO) AS PER SPECN. BS 970 BR EN3.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X25 MM THICK (MILD STEEL TRIPLE NATO) AS PER SPECN. BS 970 BR EN3.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X80 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X80 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X120 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X120 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X150 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X150 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X200 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

ROLLED HOMOGENOUS ARMOUR PLAE OF SIZE: 1830X1830X200 MM THICK WITH TYPE-2 MATERIAL AS PER SPECN. DEF STAN 95-13 LATEST ISSUE.

CHANGE LEVER RIGHT DRG NO AKC- 01/25P FOR CARBINE 5.56MM IN FINISHED CONDITION.

AS PER DRAWING

DRG NO AKC- 01/25P

CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.

CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.

DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.

CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM

CATCH COCKING HANDLE MOULDING ASSY. DRG.NO.CQA(SA)SK-1275 FOR LMG 5.56MM

• Machining & assy.

• as per attached document

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR

CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR

As per drawing

BUTT TO DRG.NO.CQA(SA)SK- 973 DC(I) NO.26953-SA DT.01.10.16 DS CAT NO. 1005-560705

BUTT TO DRG.NO.CQA(SA)SK- 973 DC(I) NO.26953-SA DT.01.10.16 DS CAT NO. 1005-560705

SK- 973 DC(I) NO.26953-SA

BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION.

BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION.

Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838 Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.

Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838 Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.

As per drg.

BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION.

BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG AKC 01/12

BUSH CLAMP BUTT TO DRG NO.AKC-13/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.

BUSH CLAMP BUTT TO DRG NO.AKC-13/2* FOR CARBINE 5.56MM IN FINISHED CONDITION.

DRG NO.AKC-13/2*

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

• Machining & fabrication

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.

BRACKET FORESIGHT TO DRG NO. AKC-02/5(IN FINISHED CONDITION FOR AMOGH 5.56MM.

BRACKET FORESIGHT TO DRG NO. AKC-02/5(IN FINISHED CONDITION FOR AMOGH 5.56MM.

DRG NO. AKC-02/5

BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08

BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08

BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.

BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.

DRG NO. AKC-03/1M

BLOCK REAR BLANK TO DRG NO. AKC-03/4BL* FOR CARBINE 5.56MM.

BLOCK REAR BLANK TO DRG NO. AKC-03/4BL* FOR CARBINE 5.56MM.

BLOCK GAS DRG NO AKC 02/4 FOR CARBINE 5.56MM IN FINISHED CONDITION.

BLOCK GAS DRG NO AKC 02/4 FOR CARBINE 5.56MM IN FINISHED CONDITION.

Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition

Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition

DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784)

• machining & assy.

• As per attached document of manufacturing & testing.

BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12

BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12

DS CAT 1005-557897

BAYONET 1A FOR RIFLE 5.56MM WEAPON DS CAT NO.1005-007812 DC(I) NO. 26521-SA DT- 12.07.10 WITH GRIP BAYONET DRG. NO. CQA(SA)SK-993 DC(I) NO.26469 DT- 03.11.09 HOUSING SCABBARD DRG. NO. CQA(SA) SK-992 DC(I) NO. 26469-SA DT- 03.11.09 IN FINISHED CONDITION.

AS PER DRAWING

DS CAT NO.1005-007812

BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.

BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.

DS CAT NO. 5340-015713

BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.

BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.

DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010

ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010

ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010

RING RETAINING AS PER DRG NO MCT 2960 1

RING RETAINING AS PER DRG NO MCT 2960 1

FABRICATION OF GLOVES WITH FIVE FINGERS IN DRILL COTTON WHITE. SWO PART II No. 20230/70230.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20230/70230. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF TROUSER DRILL COTTON WHITE SWO PART II No. 20172/70172.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20172/70172. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF COAT DRILL WHITE (SUIT DANGER BUILDING FOR A.F. KHADKI) SWO PART II No. 20209/70209.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20209/70209. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING SWO PART II No. 20129/70129.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20129/70129. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

• REFER ANNEXED SPECIFICATION.

• REFER ANNEXED SPECIFICATION.

FABRICATION OF CAPS DANGER BUILDING WHITE PLAIN SWO PART II No. 20173/70173.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20173/70173. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF GLOVES WITH FIVE FINGERS MADE OF DRILL COTTON BLUE SWO PART II No. 20232/70232.

SWO PART II No. 20232/70232. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF TROUSER DRILL COTTON NAVY BLUE SWO PART II No. 20151/70151.

SWO PART II No. 20151/70151. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE SWO PART II No. 20148/70148.

SWO PART II No. 20148/70148. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4

BRUSH CLEANING BORE TO DESIGN NO CI WPN 457 PT NO 2A26 ASSY 41 17 REF BASED ON SAMPLE 2A26 SB 41 17 COMPRISING OF FOUR DRGS TO DESIGN NO CI WPN 457 1 457 2 457 3 457 4

SWAB TO DRG NO CI WPN 555 PART No 2A26 ASSY 41 3

SWAB TO DRG NO CI WPN 555 PART No 2A26 ASSY 41 3

CI WPN 555 PART No 2A26 ASSY 41 3

DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.

DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.

PAPER & BOARD CORRUGATED AMMUNITION DOUBLE FACED FINE FLUTE TO SPECN NO. JSS 8135 - 08: 1998 (REV NO. 2) DC NO. 3753-ME CONFIRMING TO STD SIZE- 787 MM X 559 MM X 5 MM THIC

JSS 8135 - 08 : 1998

CASING ASSLY FOR MODULAR CHARGE 220 GM CONSISTING OF 03 COMPONENTS TO DRG.NO. HE/CAST 037 DET 1 TO 3, 3 COMPONENT TO DRG NO.HE/CAST 035 DET 4 TO 6, & QAP NO. HEMRL/HE/ADD/08/01REV. 00 OF 09/2008

CASING ASSLY FOR MODULAR CHARGE 220 GM CONSISTING OF 03 COMPONENTS TO DRG.NO. HE/CAST 037 DET 1 TO 3, 3 COMPONENT TO DRG NO.HE/CAST 035 DET 4 TO 6, & QAP NO. HEMRL/HE/ADD/08/01REV. 00 OF 09/2008

DRG.NO. HE/CAST 037 DET 1 TO 3, 3 COMPONENT TO DRG NO.HE/CAST 035 DET 4 TO 6, & QAP NO. HEMRL/HE/ADD/08/01REV. 00 OF 09/2008

MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C NDTO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GEDC NO. 37050-A DTD 19/04/06,SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.

MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.

REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06

FRP PACKAGE BOX TO ARDE DRG.NO.9707 00 03 00 01 000 00TA FORINFLUENCE MINE MK-II.

FRP PACKAGE BOX TO ARDE DRG.NO.9707 00 03 00 01 000 00TA FORINFLUENCE MINE MK-II.

ARDE DRG.NO.9707 00 03 00 01 000 00TA

TESTING DEVICE CIRCUIT CONTINUITY 1B (T2/1345-000429) TODRG. NO. CQA(I)-408 FOR MINE AP 1A/1B DIRECTIONAL & SPECN.NO. CQA (I)-265.

TESTING DEVICE CIRCUIT CONTINUITY 1B (T2/1345-000429) TODRG. NO. CQA(I)-408 FOR MINE AP 1A/1B DIRECTIONAL & SPECN.NO. CQA (I)-265.

DRG. NO. CQA(I)-408

DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.

DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.

FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266

FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266

DRAWING NO. CQA(I)-393

9080080629 BOX PT GP DRG NO. D1/3770-000072

9080080629 BOX PT GP DRG NO. D1/3770-000072

DRG NO. D1/3770-000072

Optical Instrument as per Drg.No CII-418/11 for Target Surveying Beacon Prism Cased 1A

Optical Instrument as per Drg.No CII-418/11 for Target Surveying Beacon Prism Cased 1A

Drg.No CII-418/11

RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO.RVIM647612.027 TU

RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO.RVIM647612.027 TU

RELAY REK-87V IDYAU 647611.001 Drg No.IDYAU 647611.001 TY RELAY REK-87V IDYAU 647611.001 -14 AS PER SPECN. NO. IDYAU 647611.001 TY

RELAY REK-87V IDYAU 647611.001 Drg No.IDYAU 647611.001 TY RELAY REK-87V IDYAU 647611.001 -14 AS PER SPECN. NO. IDYAU 647611.001 TY