STEEL BAR TO SPECN. NO. IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22-0.052 MM DIA.

STEEL BAR TO SPECN. NO. IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22-0.052 MM DIA.

ALUMINIUM ALLOY ROUNDS TO SPECN. IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS , SIZE : 10+/-0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROUNDS TO SPECN. IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN WP CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METERS , SIZE : 10+/-0.1 MM DIA WITHOUT PGG.

ALUMINIUM ALLOY ROD TO SPECN. IS:733 REAFFERMED 2006 GR. 24345 IN WP CONDITION. SIZE: 14 +/-0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS.

ALUMINIUM ALLOY ROD TO SPECN. IS:733 REAFFERMED 2006 GR. 24345 IN WP CONDITION. SIZE: 14 +/-0.1 MM DIA HAVING STRAIGHT LENGTH OF MINIMUM 1.5 METERS AND 1 MM MAXIMUM PGG ON RADIUS.

BALL DIA 3.5-200 TO DRG NO. CQA(A)/AMN/2970 DC-37271-A DT 08.11.10 “WITHOUT ELECTROPLATING” (6333620081)

BALL DIA 3.5-200 TO DRG NO. CQA(A)/AMN/2970 DC-37271-A DT 08.11.10 “WITHOUT ELECTROPLATING”

• As per Drg & spec

• As per Drg & spec

"ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI

"ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI

"ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.

"ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.

DRG. NO. FS-2473 B

"DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)

"DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

BRASS STRIP TO SPECN.BS 2870-1980 GR.CZ107 IN 'H' CONDITION TO SIZE 0.05 MM THICK X 1.75/1.73 MM WIDE X 380 MM (APPROX) LONG.

TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96

TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96

PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE

PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE

• PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE

• PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE

Packing carton for 84 mm TPT to OFAJ Drg No. FS-2367E.

Packing carton for 84 mm TPT to OFAJ Drg No. FS-2367E.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.

CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NO FS2956C(ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION).

CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NOFS2956C(ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION).

FS 2956C

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG

ROLL PIN TO OFAJ DRG. NO.FS-516 A

ROLL PIN TO OFAJ DRG. NO.FS-516 A

• ATTACHED

• ATTACHED

'O' RING TO OFAJ DRG. NO.FS-519 D

'O' RING TO OFAJ DRG. NO.FS-519 D

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT

• PQ ATTACHED

• PQ ATTACHED

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

SEALING WASHER TO OFAJ DRG.NO.FS-514 G

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH.

COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH.

TOP WASHER TO OFAJ DRG. NO. FS-513F.

DRG. NO. FS-513F.

DRG. NO. FS-513F.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST ISSUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION) MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG.

SKIRT RING TO OFAJ DRG. NO.FS-517 A

SKIRT RING TO OFAJ DRG. NO.FS-517 A

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.

WASHER NOZZLE TO OFAJ DRG NO FS 518B

WASHER NOZZLE TO OFAJ DRG NO FS 518B

case canvas as per drg no CWC 255 for pnv monocular

case canvas as per drg no CWC-255 for pnv monocular

CWC-255

OPTICAL GLASS EDF-699301 OR SF-15 SLAB SIZE 300-400x120-180x30-75

OPTICAL GLASS EDF-699301 OR SF-15 SLAB SIZE 300-400x120-180x30-75

MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 45 MM(TOLERANCE +1MM) X 2 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120

MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 45 MM(TOLERANCE +1MM) X 2 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120

MAGNESIUM ALLOY CASTING, CASTING DIMENSION:75 MM X 55MM X 90MM (GENERAL TOLERANCE +1 MM), SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120)

MAGNESIUM ALLOY CASTING, CASTING DIMENSION:75 MM X 55MM X 90MM (GENERAL TOLERANCE +1 MM), SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120)

MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 42 MM(TOLERANCE +1MM) X 2 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120)

MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 42 MM(TOLERANCE +1MM) X 2 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MC MG AL 9 ZN/(A) (NUMBER EN-MC-21120)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)

DRG No.0204-03-04-02-14-021-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Piece Guide through MIM route for JVPC as per Drg No 0204 03 02 38 40 002 OODD Item Code 7012470212

Piece Guide through MIM route for JVPC as per Drg No 0204 03 02 38 40 002 OODD Item Code 7012470212

Drg No 0204 03 02 38 40 002 OODD

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

SCREW AXIS REAR SIGHT DRG NO. 0204 03 02 00 01 003 00DC FOR JVPC 5.56MM (MIM ROUTE)

0204 03 02 00 01 003 00DC

• MIM

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

BOARD ASSY. TO DRG. NO. AF6672075-11

AS PER DRAWING

AF6672075-11

PLUG TO DRG No.AF6672095

AS PER DRAWING

AF6672095

COVER FOR PLUG AND SOCKET CONNECTER AS PER DRG No. OLF/STD/149-1

AS PER DRAWING

OLF/STD/149-1

COVER FOR PLUG AND SOCKET CONNECTOR TO DRG NO OLF/STD/149-0

AS PER DRAWING

OLF/STD/149-0

BUSH TO DRG No AF8220894

AS PER DRAWING

AF8220894

BOARD PLASTIC MOULD TO DRG No.AF6672075-12

AS PER DRAWING

AF6672075-12

COVER TO DRG No AF7852034

AS PER DRAWING

AF7852034

BOARD TO DRG No.AF5282076

AS PER DRAWING

AF5282076

HOUSING TO DRG NO AF8037024

AS PER DRAWING

AF8037024

• PLASTIC COMPONENT

• PLASTIC COMPONENTS

CAP TO DRG No AF8634303

AS PER DRAWING

AF8634303

NUT TO DRG. NO. AF8937015

AS PER DRAWING

AF8937015

SLEEVE TO DRG No. AF8210099

AS PER DRAWING

AF8210099

FRAME TO DRG NO AF7804036

AS PER DRAWING

AF7804036

BODY TO DRG. NO. AF6675006

AS PER DRAWING

AF6675006

GASKET AS PER DRG No AF7840245

AS PER DRAWING

AF7840245

BUSHING TO DRG. NO. AF7860559

AS PER DRAWING

AF7860559

BODY (HOUSING ELECTRONIC COMP.) TO DRG No.AF8020344

AS PER DRAWING

AF8020344

CPP HOLLOW CORRUGATED BOX TO DRG. NO. RFI SK. NO.6431*4(TO HOLD 5 NOS.RIFLE)FOR 30-06,0.22" ,.315" SPORTING RIFLE & 12 BORE PAG

CPP HOLLOW CORRUGATED BOX TO DRG. NO. RFI SK. NO.6431*4(TO HOLD 5 NOS.RIFLE)FOR 30-06,0.22" ,.315" SPORTING RIFLE & 12 BORE PAG

RFI SK. NO.6431*4

BUTT TO DRG NO.TGG-401(DC/RFI/NO.09/025/14).FOR TEAR GAS GUN

BUTT TO DRG NO.TGG-401(DC/RFI/NO.09/025/14).FOR TEAR GAS GUN

TGG-401

PARTED STEEL BILLET FOR 155 MM I.M.I. SHELL AS PER OFAJ DRG NO. F-632

PARTED STEEL BILLET FOR 155 MM I.M.I. SHELL AS PER OFAJ DRG NO. F-632

F-632

PAINT READY MIXED AIR DRYING WHITE SEMI-GLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECIFICATION IS:168-1993 (THIRD REVISION). TO BE SUPPLIED IN 20 LTRS CONTAINER

SPECIFICATION IS:168-1993 (THIRD REVISION).

PAINT RFU STOVING M/F SPRAYING LIGHT BRUNSWICK GREEN ISC-225OF IS-5-1994 TO SPECN.NO.JSS-8010-12. TO BE SUPPLIED IN 20LTRS CONTAINER

SPECN.NO.JSS-8010-12

PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK TO JSS 8010-24:2014 (REV.NO.3) /LATEST ISSUE

JSS 8010-24:2014 (REV.NO.3) /LATEST ISSUE

PAINT RFU BLACK ACID PROOF FOR AMN TYPE-1 TO SPRAYING SPECN.IND/ME/651(A)DC(I)NO.3754-ME DT.12.12.2002

SPRAYING SPECN.IND/ME/651(A)DC(I)NO.3754-ME DT.12.12.2002

READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004

READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004

SPECIFICATION JSS 8010-68:2014 (REV.NO.3) PAINT PRIMING REDOXIDE ZINC CHROME,AMMN.,AIR DRYING MATT FINISH, BRUSHING/SPRAYING

SPECIFICATION JSS 8010-68:2014 (REV.NO.3)

PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG. NO.F-630

.

F 630

PARTED STEEL BILLET FOR 105 MM IFG SHELL TO OFAJ DRG.NO. F-472 D.OTHER PARAMETERSARE TO BE GOVERNED BY OFAJ DRG. SPECN. NO. F-330 K (LATEST ISSUE)

as per DRG. SPECN. NO. F-330 K

DRG.NO. F-472 D

PARTED STEEL BILLET AS PER OFAJ DRG.NO.F-561 D & SPECN.AS PER OFAJ F-444 D (LATEST ISSUE) FOR SHELL 107 HE

SPECN.AS PER OFAJ F-444 D

OFAJ DRG.NO.F-561 D

PARTED STEEL BILLET TO OFAJ DRG. NO. F-619 AND SPECIFICATION AS PER OFAJ SPECN.NO.F-531 B (LATEST ISSUE) FOR 76.2 MM PRACTICE SHELL (NAVAL AMMUNITION).

S PER OFAJ SPECN.NO.F-531 B

DRAWING NO.F-619

PARTED STEEL BILLET TO OFAJ DRG.NO.F-536A AND SPECIFICATION AS PER OFAJ SPECN.NO.F-537A (LATEST ISSUE) FOR 76/62 SRGM SHELL

AS PER OFAJ SPECN.NO.F-537A

OFAJ DRG.NO.F-536A

PARTED STEEL BILLET AS PER DRG.NO.F-629

AS PER DRAWING

DRG.NO.F-629

STEEL BILLETS AS PER OFAJ DRG.NO.F-555 "A" FOR CANISTER FORGING

AS PER DRAWING

OFAJ DRG.NO.F-555

MANUFACTURE AND SUPPLY OF PROOF SHOT 155MM 77B AS PER OFAJ DRG. NO.SM-959A. SCOPE, APPLICABLE TERMS AND CONDITIONS ARE AS PER ANNEXURE

AS PER ANNEXURE

STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 AS ROLLED OR FORGED NORMALIZED. SIZE 160 PLUS 5 OR MINUS 0 0 MM DIA PARTED IN LENGTH OF 410 PLUS OT MINUS 5MM FOR MANUFACTURING OF 155MM ERFB SLUG. MATERIAL SHALL BE PROOF MACHINED AND ULTRASONIC TESTED FOR INTERNAL CRACKS.

SPECN JSS 9510 01 1982

PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY REAR PART AS PER DRG. NO.F-628

AS PER DRAWING

DRG. NO.F-628

PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY FRONT PART AS PER DRG. NO F-627

AS PER DRG

AS PER DRG. NO F-627

THREAD PROTECTOR TO OFAJ DRG.NO.SM-1170 FOR 125MM SHELL HE.

as per drawing

DRG.NO.SM-1170

PROTECTOR FOR 2ND COPPER BAND TO OFAJ DRG NO. SM-621C

as per drawing

DRG NO. SM-621C

PROTECTOR FOR FIRST COPPER BAND TO OFAJ DRG NO. SM-620C

as per drawing

OFAJ DRG NO. SM-620C

PLUG TO CQA(A)PART NO ISX 393 DCI NO 35484 A DT.31/03/93.

as per Drawing

PART NO ISX 393

COPPER TUBE TO IS:2501 OR COPPER RING TO JSS 4710-01 IN ANNEALED COND.WITH CHEMICAL COMPOSITION AS PER IS:191 DHP WITHBISMUTH %0.002 max,O2 -0.07% max, UTS-196 MN/m2(min) & E%-35min REF.AS PER CQA DRG.NO.4-024610/095 DC-36608-A DT 2/11/99SIZE O/D 149.0+/-1.0mm X WT13.0mm+/-1.5MM,200mm - 600mm LONG

as per drawing

COPPER TUBE TO IS:2501 OR COPPER RING TO JSS 4710-01 IN ANNEALED COND.WITH CHEMICAL COMPOSITION AS PER IS:191 DHP WITH BISMUTH %0.002 max,O2 -0.07% max, UTS-196 MN/m2(min) & E%-35min.REF. AS PER CQA DRG.NO.4-024610/022 DC-36608-A DT 2/11/99SIZE O/D 143.0+/-1.0mm X WT10.0mm+/-1.0MM,200mm - 660mm LONG

as per Drawing

DRG.NO.4-024610/022

NOSE ADAPTER TO CQA(AMMN) DRG.PART NO.ISX 387.DC(I).37147--ADT.14/11/07. (MATERIAL AS PER SPECN.BS-970 PT.I 1983 GRADE708 M 40 IN ANNEALLED CONDITION WITH HARDNESS 248 BHN MAX.)FOR 125 MM SHELL HE 1A

as per Drawing

CQA(AMMN) DRG.PART NO.ISX 387

PARTED STEEL BILLET TO OFAJ.DRG.NO.F-467D & OFAJ DRG/SPECN F-345 G FOR 125 MM HE SHELL

OFAJ DRG/SPECN F-345 G

DRG.NO.F-467D

CORRUGATED PACKING BOX TO SIZE L 13 W 13 H 11 INCHES AND SHEET THICKNESS 120 GSM BOX SHALL BE HAVING 4 COMPARTMENTS INSIDE OF EQUAL SIZE BOX MUST SUSTAIN LOAD OF MIN 10 KGS

NO