SCLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

• MSME

• CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

• MSME

• CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

• MSME

• CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

• MSME

• CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

• MSME

• AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

• MSME

• CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CARTG SA 5 POINT 56 MM BALL

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

• MSME

• DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

• MSME

• CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

• MSME

• CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

• MSME

• ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758

Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758

SK-9758

SPCN: JSS-6810-125-2014, REVISION NO 3.

SPCN: JSS-6810-125-2014, REVISION NO 3.

• MSME

• SPCN: JSS-6810-125-2014, REVISION NO 3.

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2).

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

• MSME

• CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

• MSME

• IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

• MSME

• CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

DRG. NO. IND/ME/59 DC NO. 3604-ME DTD. 13/12/1999

• MSME

• BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX G 70 STEEL

AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A

FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A

OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A

BOX C 18A STEEL

SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A

SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A

WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

• MSME

• BOX C-26A, WOOD FOR PACKAGE AMMUNITION, 92A PART NO. ISV-352A DRG-CIA/AMMN/1773 DC-35922-A DTD.23.02.95 & SPECIFICATION IA-948 (a,f) DC - 36081 A.

BOLT OF SIZE M 16 X 2P X 50 MM

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO.

BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

• MSME

• BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

• MSME

• BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent.

BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent.

JSS 6810 -145:2017( Revision No 2)

JSS 6810 -145:2017( Revision No 2)

• MSME

• JSS 6810 -145:2017( Revision No 2)

ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986

ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986

BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

DRG NO, OFBA/NC/189

• MSME

• BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

DRG NO.OFBA/NCP/EXPN/17

• MSME

• BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

• MSME

• MSME

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

• MSME

• BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

• MSME

• BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.

BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.

DRG. NO.OFBA/NC/46 AMENDED ON 27/03/2010.

• MSE

• MSE

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

• MSME

• BAG COTTON TNT 25 KG TO DRG. NO. OFBA/RX/243 AMMENDED ON 7.11.02.

ASSY ERA CONTAINER TOP BOX

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

• MSME

• TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

ASSY ERA CONTAINER STD BOX

STANDARD ERA BOX TO SPEC. NO. HERML/MED/PS/290 & HEM RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

• MSME

• RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.

AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.

• MSME

• Specn No-IS:662/1980

ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.

ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%..

• MSME

• ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.

ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

• MSME

• ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

Drg.No.OFBA/PETN/23 Dtd.15.01.1970

ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

• MSME

• ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

• MSME

• ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

• MSME

• Specn No. IS / 170-2004 (Latest Revision )

30 MM BMP II APT

30 MM BMP II APT

Steel Insert for 5.56mm INSAS To Drg. No. ARDE/SK/2795, DET NO. 9; PART NO IQV 112, DCI NO 36853-A DATED 24.09.2002 and Material to Specification BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire

BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire

DRG. NO. ARDE/SK/2795, DET NO. 9; PART NO IQV 112, DCI NO 36853-A DATED 24.09.2002

Steel Core for AK-47 Bullets

IS : 1570 (Part-II) 1979/40C8 Or BS:970 Part-I 080-M40/709 M40 Hardness : VPN 450 - 600. Oil Blackened/Oil Dipped Drg. No. VA7/PROV/009 Note :- Weight of the Steel Core is 3.19G to 3.27G i.e. 3.23(+/-0.04)G.

DRG NO. VA7/PROV/0009

POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC

DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 250 (+/-5)MM X 70 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/- 75)

• EXTRUSION PROCESS

• THICKNESS TEST
• Edge Crush Test (ECT)
• Impact and Tear Strength Test

POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC

DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 245 (+/-5)MM x 160 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/-75)

• EXTRUSION PROCESS

• THICKNESS TEST
• Edge Crush Test (ECT)
• Impact and Tear Strength Test

LINK CARTG. METALLIC BELT 7.62MM M13

TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. NO. ISV 266 GA WHICH CONSIST OF CWP 14A, CARTON 11 A/L AND CARTON 12A

F-7268389, DC NO. 36977-A DTD. 24-08-2004

• Press Work

• As per QMI document

CARTON BOARD AMMN (787.4 x 558.8 x 0.508) TO SIZE :- 787.4MM x 558.8MM x 0.508MM (+/-) 0.051MM

JSS : 8135-15-2016 (REVISIONN NO. 3)

ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV)

ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV)

DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (P

• MACHINING

• MICROMETER

DESIGN, MAKING OF PROTOTYPE AND TESTING OF RADIO FREQUENCY OSCILLATOR AND DETECTOR WITH ANTENNA TO DETECT THE TARGET WHEN AMMUNITION IS AT A HEIGHT OF 10 (+/-6) METERS IN LOW ANGLE IN PROJECTILE TRAJECTORY AFTER GETTING FIRED BY 155 MM GUN

DESIGN, MAKING OF PROTOTYPE AND TESTING OF RADIO FREQUENCY OSCILLATOR AND DETECTOR WITH ANTENNA TO DETECT THE TARGET WHEN AMMUNITION IS AT A HEIGHT OF 10 (+/-6) METERS IN LOW ANGLE IN PROJECTILE TRAJECTORY AFTER GETTING FIRED BY 155 MM GUN

CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN)

AS PER DRG TO CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN)

A9900

RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL

As per Drawing and specification

30P 4009*2

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTIO
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

RANGE PLATE LH TO DRG. NO. 30P 4008 * 2 REQUIRED FOR 40mm MGL

As per the Drawing and specification

30P 4008* 2

INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).

AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).

C2026

• As per OFT requirements

• As per OFT requirements

Plastic Slide Fasteners Light Special Duty Closed End Auto Lock OG 18 cm.

IS:14181 ( Part 1 to 3):2002 ( With all Amendments)

IS:14181(Part 1 to 3):2002 with amendment no.2,march 2008

IS:14181(Part 1 to 3):2002 with amendment no.2,march 2008

Opt Glass Slab EDF-651336

Optical Glass EDF-651336

IS:1400 Striae GRD-A Inclusion GRD

GLASS SLAB BSC-510644

GLASS SLAB BSC-510644 SLAB SIZE : 300-400x120-180x30-75mm IS: 1400-1960

Handle Cocking Slide without Anodizing DRG No. SKM-1004

Handle Cocking Slide without Anodizing DRG No. SKM-1004

DRG No. SKM-1004

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA

DRG.NO.0204-03-02-03-22-001-00DA

PVC MASTER BATCH BROWN (TO WITHSTAND COLD BEND TEST AT (-) 30 DEGREE CENTIGRATE)

PVC MASTER BATCH BROWN (TO WITHSTAND COLD BEND TEST AT (-) 30 DEGREE CENTIGRATE)

• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

AS PER DRG.

AS PER DRG.

AS PER DRG

AS PER DRG

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

DS CAT NO.5315-001554

• As per drawing

• As per drawing

AS PER DRG.

AS PER DRG.

REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III

REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III

DRG NO PHMK-III-1-22

Plunger Change Lever Right for JVPC 5.56 through MIM route/ Alt. Material

Plunger Change Lever Right for JVPC 5.56 through MIM route/ Alt. Material

Drg. No. 0204 03 03 02 36 003 00DA

St. Forging Plate Bottom to DRG No. SKM-283*2

St. Forging Plate Bottom to DRG No. SKM-283*2

SKM-283*2

Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route

• Chemical and mechanical properties as per std. given drawing.

• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)

MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)

DRG NO. AR/012/1-ALT/RFI

ROD STL.TOOL GR.X108CR17MO,60D L.F.NO.9927082790

STL.TOOL CARBON ROUND BAR 60 MM DIA TO IS 6603:2001,GR.X108CR17MO IN THE RUNNING LENGTH OF 2 MTRS AND ABOBE L.F.NO.9927082790

SHEET STL.GR.D IS:513,2.5 T L.F.NO.9927073682

SHEET STL.IS:513:94,TYPE D (N), 2.5 MM THICK X500WIDEXINTHE RUNNING LENGTH OF 2MTR AND ABOVE L.F.NO.9927073682

ROD STL/ MED CARBON 50 C8 65 D L.F.NO.0145002065

STEEL BRIGHT BAR MEDIUM CARBON 65 MM DIA TO SPECN,IS:7283-920F IS:5517-93 GR.50 C8 IN RUNNING LENGTH OF 2.5 MTRS APPX L.F.NO.0145002065

ROD STL.TOOL GR.T11OW6CR4 12D L.F..NO.9927082764

STEEL TOOL ALLOY ROUND BAR 12.0 MM DIA. AS PER IS:3748:90 GR,T11OW6CR4 IN THE RUNNING LENGTH 2 TO 4 MTRS L.F.NO.9927082764

ROD STL.TOOL GR.75 T6,D 3MM L.F.NO.9927094853

STEEL TOOL ALLOY ROD DIA 3MM TO SPCN IS:3748-90,GR.75 T6 IN THE RUNNING LENGTH OF 2 MTRS AND ABOVE L.F.NO.9927094853

ROD STL.TOOL GR.T90MN6WCR2,D8 L.F.NO.9927065311

ROD TOOL STL ALLOY 8 MM DIA TO SPCN.IS3748:90,GR.T90MN6WCR2 IN THE RUNNING LENGTH OF 2 METRES AND ABOVE L.F.NO.9927065311

ROD STL.ALLOY GR.40CR4,D 10MM L.F.NO.0333002009

STEEL ALLOYED ROD DIA 10MM TO SPCN:IS:7283 GR.40CR4 OF IS:5517,IN RUNNING LENGTH OF 2 TO 3 MTRS .L.F.NO.0333002009