IS: 2422 & MODIFICATION AS PER ANNEX. "A"

IS: 2422 & MODIFICATION AS PER ANNEX. "A"

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

IS:179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05)

IS:179-1977 V.NO. 4 REAFFIRMED 1997 EDITION 3.5 (1998-05)

IS: 179-1977 VARIETY NO. 4

IS: 179-1977 VARIETY NO. 4

IS: 1424-1983 VARIETY NO.4 duly flame proofed

IS: 1424-1983 VARIETY NO.4 duly flame proofed

St Forging Cylinder Gas Drg No SKM 306 star 5

St Forging Cylinder Gas Drg No SKM 306 star 5

SKM 306 STAR 5

PLATE BUTT TO DRG.NO.TSP-408(DC/RFI/NO.08C/030/08)FOR "30-06"SPORTING RIFLE

PLATE BUTT TO DRG.NO.TSP-408(DC/RFI/NO.08C/030/08)FOR "30-06"SPORTING RIFLE

DRG.NO.TSP-408

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 00 00 004 00DA

EXTRACTOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 00 00 004 00DA

0204 03 02 00 00 004 00DA

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Trigger Rear for JVPC through MIM Route Drg No 0204 03 02 02 18 013 OODC (Item Code- 7012470201)

Trigger Rear for JVPC through MIM Route Drg No 0204 03 02 02 18 013 OODC (Item Code- 7012470201)

Drg No 0204 03 02 02 18 013 OODC

Retainer for JVPC Drg No 0204 03 02 00 09 00 50 OODC (Item Code- 7012470425)

Retainer for JVPC Drg No 0204 03 02 00 09 00 50 OODC (Item Code- 7012470425)

Drg No 0204 03 02 00 09 00 50 OODC

Steel Forged Flat size 130mmx100mmx535mm for LMG MAT Specification EN 39 B Req To Integrated Receiver Body (Item Code- 04150331653)

Steel Forged Flat size 130mmx100mmx535mm for LMG MAT Specification EN 39 B Req To Integrated Receiver Body (Item Code- 04150331653)

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

PART NO.ISV 95 SA FOR PACKING OF PRIMER 1A/L. [REFER OFBL DRG.NO.BL/EQP/U-1/241]

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

DRG NO. 0204-03-02-19-31-000-00DG

Combination Side Cutting Plier

Combination Side Cutting Plier 200MM SPECN:- IS:3650:1981 INSULATED (JHALANI/TAPARIA/EVEREST TOOLS-BRAND)

Combination Side Cutting Plier 200MM SPECN:- IS:3650:1981 INSULATED (JHALANI/TAPARIA/EVEREST TOOLS-BRAND)

WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECECLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959(SHT.-1 & SHT.-2)(DC-26353-SA)

WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECECLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959(SHT.-1 & SHT.-2)(DC-26353-SA)

Chest Rifle 5.56mm (Wooden) Capacity-10 Rifles with accessories. to DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

Chest Rifle 5.56mm (Wooden) Capacity-10 Rifles with accessories. to DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

DS CAT No.1005-560403 (SHT.-1 & SHT.-2) (Latest DC-26483-SA FOR SHT.-1 & DC-26197-SA FOR SHT.-2) For Rifle 5.56mm INSAS.

DRG.NO.: ADRDE/1359(a) DRD/25/98.

DRG.NO.: ADRDE/1359(a) DRD/25/98.

TAPE NYLON 26 MM MEDIUM U D BS 700 KG

ADRDE/ SPECN/65

FLOOR BOARD (FRP) IN 3 PARTS

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

IMPD - 2047/A and Appendix- 'B' OF Specn no. CQAE/1940/ 1520(b):2006

CASE CARRYING AS PER MCT-1966/1 FOR GRAPH CC

CASE CARRYING AS PER MCT-1966/1 FOR GRAPH CC

MCT_1966_1

RETICLE OPTICAL INSTRUMENT AS PER DRG. NO. MCT-3438 FOR TELESCOPE SIGHTING 5.56 MM LMG

RETICLE OPTICAL INSTRUMENT AS PER DRG. NO. MCT-3438 FOR TELESCOPE SIGHTING 5.56 MM LMG

MCT_3438

FINISHED SUN FILTER GLASS NS-2 AS PER DRAWING NO. MCT-2238 FOR LMG

FINISHED SUN FILTER GLASS NS-2 AS PER DRAWING NO. MCT-2238 FOR LMG

MCT_2238

PIN FOR LEVER CONTROL HAND TO DRG. NO. MCT-3230 FOR 5.56 MM RIFLE

PIN FOR LEVER CONTROL HAND TO DRG. NO. MCT-3230 FOR 5.56 MM RIFLE

MCT_3230

SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO IS 6911-92 (AS PER CQA(MET)).

AS PER DRG. & SPECIFICATION

HARLEY BUCKLE

ADRDE/1308(c)

• As per Specification/Drawing

• As per Specification/Drawing

POLYMER MAGAZINE ASSY.DRG.NO.RFISK.9923AR7.62X39MM,BODY MAT.:FULLY REINFORCED RIBBED ST.CONT.WITH IMPACT&CRASH RES,POLY.BLACK STAINLESS ST.LOCKING LUGS BOTH FRONT&REAR FOR INCRESEDMITTARY GR.DURABILITY.SPG:STAINLESS ST.CAP:30 RDS.FINISH:MATBLACK.CONSIST.OF DRG.AR/024/01-RFI(DC 11C/012/18DT.24.5.18)

POLYMER MAGAZINE ASSY.DRG.NO.RFISK.9923AR7.62X39MM,BODY MAT.:FULLY REINFORCED RIBBED ST.CONT.WITH IMPACT&CRASH RES,POLY.BLACK STAINLESS ST.LOCKING LUGS BOTH FRONT&REAR FOR INCRESEDMITTARY GR.DURABILITY.SPG:STAINLESS ST.CAP:30 RDS.FINISH:MATBLACK.CONSIST.OF DRG.AR/024/01-RFI(DC 11C/012/18DT.24.5.18)

RFISK.9923AR

JSS: 8305-5-2000 VARIETY NO. "A"

JSS: 8305-5-2000 VARIETY NO. "A"

JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5)

JSS: 8305-5-2000 V.NO. "A" (SHADE NO. 388 OF IS:5)

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

LIFTING PLANK

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

IMPD - 0407 and As per Clause no. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(b):2006

Neoprene Rubber mould with shore hardness 60+-5

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

Specn. No. Item no. 34 of Drawing. IMGA-0067/1(B) Sheet - 2 of 3

Steel Sheet Size 4.0X1250X2500MM

GRADE 30C8, IS:5517-93

Optical Instrument as per Drg.No CII-418/11 for Target Surveying Beacon Prism Cased 1A

Optical Instrument as per Drg.No CII-418/11 for Target Surveying Beacon Prism Cased 1A

Drg.No CII-418/11

DRG. NO.:ADRDE/1302 (a) DRD/44/98.

DRG. NO.:ADRDE/1302 (a) DRD/44/98.

DRG. NO.:ADRDE/1302 (a) DRD/44/98.

GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL

AS PER DRG No.TAR-RB-K-1026

TAR-RB-K-1026

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)

GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)

BODY LF NO 7440205752

BODY LF NO 7440205752

IUMK.733578.001

BRACKET TO DRG NO AL8081179 LF NO 7440205747

BRACKET TO DRG NO AL8081179 LF NO 7440205747

AL8.081.179

PLUG LF NO 7440205739

PLUG LF NO 7440205739

AL8.347.029

FLANGE LF NO 7440201612

FLANGE LF NO 7440201612

AL8.231.644

CAP ASSY LF NO 7440200834

CAP ASSY LF NO 7440200834

AL6430364

STEEL PLATE 10MM THICK X 1000 X 2500 MM LENGTH OR ITS MULTIPLE TO SPECN IND MATL IS 5986 2011 Gd 205

STEEL PLATE 10MM THICK X 1000 X 2500 MM LENGTH OR ITS MULTIPLE TO SPECN IND MATL IS 5986 2011 Gd 205

COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104

COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104

INVESTMENT CASTING OF COVER PLATE 42" TO DRG. NO. 675-51-367.

INVESTMENT CASTING OF COVER PLATE 42" TO DRG. NO. 675-51-367.

675-51-367.

FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE

ADRDE/QMS/TDTM/SPECN/98.

sdsads

sadsa

dwdsa

test

test

454665

PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982

PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982

DRG NO 740-22-32-00

QUARTZITE SILICA PARTICLES AS PER IS: 1987-74. GRADE 'A' GRAIN SIZE - 212/425. CHEMICAL COMPOSITION AS PER ANNEXURE.

QUARTZITE SILICA PARTICLES AS PER IS: 1987-74. GRADE 'A' GRAIN SIZE - 212/425. CHEMICAL COMPOSITION AS PER ANNEXURE.

LEVER REMOTE CONTROL FEED

As per the drawing and specification.

A 6029

Wooden Chest for LMG 5.56 MM Drg. No. SK5026

Wooden Chest for LMG 5.56 MM Drg. No. SK5026

Drg. No. SK5026

BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.

BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249.

DRG. NO.770-24-33-00

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

1345-000429

• Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

GLASS-SZS-22

FILTER GLASS SZS-22 SLABSIZE 100TO150MM X 100TO150MM X 4TO6MM, GLASS DENSITY 2.93 GRM/CC ,REFRACTIVE INDEX 1.535000, OTHER CHARACTERISTICS AS PER SPECIFICATION NO OLF/OPT-GLASS/SPEC/03-2 .

GLASS -OS -23 -1

GLASS OS-23-1, SLAB SIZE 120*120*10MM, OTHER CHARACTERISTICS AS PER SPECIFICATION OLF/OPT-GLASS/SPEC/03-2, OST 3-852-79, GOST 9411-91

GLASS SLAB TK-116

RADIATION RESISTANT GLASS TK-116,SLAB SIZE 150TO360 X 120TO 250 X 40TO75 MM, GLASS DENSITY3.56 GRM/CC , REFRACTIVE INDEX ND = 1.612694 ABBE VALUE 58.35, OTHER CHARACTERISTICS AS PER OLF/OPT-GLASS/SPEC/03-2

GLASS SLAB K-8

GLASS SLAB K-8,SIZE 250 X 250 X 75 MM, REFRA.INDEX (ND)=1.51 6373, ABBE VALUE (VD) = 64.07 OPTICAL GLASS WEIGHT PER SLAB = 11.81 KGS, OTHER CHARACTERIS TICS AS PER SPECIFICATION NO. GOST:3514-76 AND OLF/OPT.GLASS /SPEC/03-2

GLASS TF-108

SLAB SIZE 150X150X50 RADIATION RESISTANT GLASS TF-108 SLAB SIZE 150X150X50MM,REFR ACTIVE INDEX (ND) = 1.689492, ABBE VALUE (VD) =31.13, DENSITY =4.23 GM/CC WEIGHT PER SLAB=4. 76 KG. OTHER CHARACTERISTICS AS PER SPEC.NO. OLF/OPT-GLASS/SPEC/03-2

GLASS SLAB TF-101

RADIATION RASISTANT GLASS TF-1 01, REFRA.INDEX(ND.)=1.647665 ABBE VALUE(VD.)=33.87 , DENSIT Y 3.86 GRM/CC, SLAB SIZE 200TO360 X 110TO250 X 30TO70 MM, OTHER CHARACTERISTICS AS PER S PEC. NO. OLF/OPT-GLASS/SPEC/03 -2

GLASS-NS-8

FILTER GLASS NS-8, SLAB SIZE 120*120*6 MM, REFRACTIVE INDEX(ND)=1.50300, WIEGHT PER SLAB 0.21 KG. OTHER CHARACTERISTICS AS PER SPECN, NO. OLF/OPT-GLASS/SPEC/03-2, DENSITY=2.42

RANDOM GLASS SLAB/ BLOCK LK-105 LF 9927092772

GLASS SLAB: LK-105, SIZE 250*250*75 MM REF. INDEX(ND)=1.478166 ABBE VALUE(VD)=65.59, RADIATION RESISTANT, WEIGHT PER SLAB=10.64 KGS, DENSITY=2.27 GM/CC OTHER CHARACTERISTICS AS PER SPECIFICATION NO. GOST:3514-76 AND OLF/OPT-GLASS/SPEC/03-2

GLASS SLAB BF 108 LF 2614645827

SLAB SIZE: MULTIPLE OF 50*MULTIPLE OF 50*50MM,MAXIMUM SLAB SIZE=350*300*50, REDIATION RESISTANCE GLASS, REFRACTIVE INDEX ND=1.582713, ABBE VALUE VD=46.47,OTHER CHARACTERISTICS AS PER SPECN NO. OLF/OPT-GLASS/SPEC/03-2. DENSITY=3.28 GM/C

GLASS SLAB BK-108 LF 2616275467

GLASS SLAB BK-108 SIZE: 160*160*45MM REF. INDEX(NO.)=1.546779 ABBE VALUE(VD.)=62.78 RADIATION RESISTANT GLASS, OTHER SPECIFICATIO-OLF/OPT-GLS/SPEC/03-2, DENSITY OF GLASS 2.85 GM/CC

GLASS SLAB K-108

RADIATION RASISTANT GLASS K-108, SLAB SIZE 200TO360 X 140TO 250 X 40TO75 MM, GLASS DENSITY 2.52 GRM/CC, REFRACTIVE IND 1.516373 ABBE VALUE 64.07 , OTHER CHARACTERISTICS AS PER SPEC. NO. OLF/OPT-GLASS/SPEC/03-2

GLASS-DB- 1-M LF 2612817414

GLASS DB-1-M, SLAB SIZE 200*200*8MM, WIEGHT PER SLAB-.72KG. DENSITY = 2.24GM/CC OTHER CHARACTERISTICS AS PER SPECIFICATION NO. OST-3-1899-73

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

• MSME

• MSME

PRISM BLANK(2644168561)

AS PER DRAWING NO.OLF/B/7160337/165

MOULD FOR PRISM BM 90 DEGREE (2612867271)

AS PER DRAWING NO.OLF/B/7201041/170

MOULD FOR PRISM AP-60 DEGREE(2612867261)

AS PER DRAWING NO OLF/B/7200080/171

GLASS MOULD FOR PRISM

GLASS MOULD FOR PRISM AS PER DRG NO. OLF/B/7.201.006/078 FOR BPK-2-42-DC. GLASS BK-110, RADIATION RESISTANT GLASS, REFRACTIVE INDEX NO=1.568891, ABBE VALUE NO.=56.05, DENSITY OF GLASS=3.12 GM/CC

BSH7201006/078

MOULD FOR PRISM

MOULD FOR PRISM, GLASS USE K-108 GOST 3514-76, ALL SPECIFICATION AS PER DRG. NO. OLF/B/7200189/141. (GLASS USE IN MOULD REFRACTIVE INDEX NO=1.516373, ABBE VALUE (VD)=64.07, DENSITY OF GLASS 2.52 GM/CC, RADIATION RESISTANT GLASS)

OLF/B/7200189/141

GLASS MOULD FOR PRISM

GLASS MOULD FOR PRISM, ALL CHARACTERISTICS AS PER DRAWING NO. OLF/B/7200068/084. GLASS K-108, REFRACTIVE INDEX=1.516373, ABBE VALUE(VD)=64.07. DENSITY OF GLASS=2.52 GM/CC

OLF/B/7200068/084

• OPTICAL COMPONENT

• OPTICAL COMPONENT

GLASS MOULD FOR MIRROR LF9927097438

AS PER DRAWING NO.BSH7230073

WINDOW TO DRG NO. OLF/R&D/001.01.10 FOR RED DOT SIGHT

WINDOW TO DRG NO. OLF/R&D/001.01.10 FOR RED DOT SIGHT

OLF/R&D/001.01.10

LENS ASSY TO DRG NO. OLF/R&D/RDS/001.01.11&12 FOR RED DOT SIGHT

LENS ASSY TO DRG NO. OLF/R&D/RDS/001.01.11&12 FOR RED DOT SIGHT

OLF/R&D/RDS/001.01.11&12

Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)

Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)

Drg. No. SK-886

IND/TC/1208

IND/TC/1208