SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400

SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400

DRG./PART NO.L-4110400

PH-1-7

PH-1-7

ADAPTOR NON RET. VALVE PART NO. F0130145 B

ADAPTOR NON RET. VALVE PART NO. F0130145 B

PART NO. F0130145 B

SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A

SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A

DRG.NO.620-04-1130-1/A

INFLATABLE AIR SPLINT FOR LEG ANKLE + 2

AS PER TENDER DOCUMENT

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2).

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

• MSME

• WEAR ADDITIVE LINER FOR CHARGE-9.(SPECIFICATION;NO.0808346 DT;15.12.86.(BOFORS DRG.NO.5191847 DC NO. 34720-A, DT-28.09.89.

White Colour To Specn.No.CS-5301-B

White Colour To Specn.No.CS-5301-B

• MSME

• White Colour To Specn.No.CS-5301-B

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

• MSME

• WASHER SQEEZER FOR NORMAL ARROW CHARGES TO DRG.NO. OFBA/RK/228.DT.19.08.85.

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

• MSME

• VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC.JSS 8010-63-2016 (Fourth Revision)

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg. No. 13 S 002 & Drg No. 4085566 & Drg. No. 4085565 As per OFBA Requirement

Drg No. 4085566 & Drg. No. 4085565 & Drg. No. 13 S 002 As per OFBA Requirement

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

HEAD IMMOBILIZER MAKE ME BER s r 1 via LANGHIRANO 270 43100 FONTANINI PARAMA ITALI MODEL ART 625 XEROS ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER

AS PER TENDER MAKE AND MODEL

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

• MSME

• TRINITROTOLUENE (TNT) GRADE 1E/1A FLAKE CONFORMING TO SPECN JSS-1376-02-2017-(Fifth REVISION)

TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRIETHANOL AMINE (TEA) FOR SYNTHESIS EX-MERCK/ ALDRICH ASSAY (GC AREA % ) : 99%, DENSITY :1.122-1.125 G/CC WATER (KF) :< 0.3 %, IN 1.0 LITRE PACKINGS.MERCK CAT NO. 822341.

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

• MSME

• TRICHLORO ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS:245 2020( Fourth Revision )

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

• MSME

• TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN.IS:537 2011(Reaffirmed Year : 2016

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE).

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD POLYSTER ART NO. 8710 TKT 30 DTEX 275X3, 1000 MTRS "ASTRA" BLACK

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

• msme

• THREAD COTTON SEWING UNBLEACHED UNPROOFED (27 tex X 9)TUBES OF 1000 mtrs.SPECN- JSS 8310-02-2016 REVISION NO 3 DC 5497- ME,DT.24.09.16.

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

• MSME

• THREAD COTTON SEWING BLACK UNPROOFED 16 TEX X 6 (COPS OF 1000 METRES) CONFORMING TO SPECIFICATION IS:1720 OF 1978 (SECOND REVISION) REAFFIRMED 2017

THERMOCOLE OF AVERAGE DENSITY

THERMOCOLE OF AVERAGE DENSITY 18 TO 25 KG/M CUBE SIZE 1M X 0.5 M X 6 MM THICKNESS. THICKNESS OF SHEET SHOULD BE 6 MM.

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

• MSME

• TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

• MSME

• TEFLON SHEET (FILM) OF SIZE 126X126X0.25MM SPEC: HEMRL/PS/286, HEMRL DRG. NO. 1518 DETL.2

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

• MSME

• TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

• MSME

• M.S.TARGET PLATE FOR CLC-2 SIZE:1000 MM X 300 MM X 12.5 MM. TOL.ON THICKNESS 5% SPECN NO IS 2062-2011 Reaffirmed 2016 seventh revision.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION PURPOSES 6 MM PLUS OR MINUS 1.5 MM WIDE CONFORMING TO SPECIFICATION IND/ME/888 DC 6104-ME DT.31/08/19

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

• MSME

• TAPE COTTON SPECIAL 12.7 MM SCOURED SPECN:-IS-3255/1979. Reaffirmed 2019 (FIRST REVISION)

TAPE COTTON RED FAST COLOUR

,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

• ,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N, AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).

TAPE ADHESIVE WATERPROOF 25 MM WIDTH CONFORMING TO SPECIFICATION IND/ME/790(b):2013 DC-5266-ME, DTD.24-06-14 (BLACK COLOUR).

TAPE ADHESIVE 25 MM WIDTH WATERPROOF CONFORMING TO SPECIFICATION IND/ME/790(b) DC 5266 ME DT. 24/6/2014

TAPE ADHESIVE 25 MM WIDTH WATERPROOF CONFORMING TO SPECIFICATION IND/ME/790(b) DC 5266 ME DT. 24/6/2014

• MSME

• TAPE ADHESIVE 25 MM WIDTH WATERPROOF CONFORMING TO SPECIFICATION IND/ME/790(b) DC 5266 ME DT. 24/6/2014

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

• MSME

• TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

• MSME

• TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.

PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

• MSME

• PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SYLARTIVI-12 AS PER T.T.D.,FROM V.S.S.C.,TRIVANDRUM.

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

• MSME

• SURGICAL HAND GLOVES SIZE 7 1/2" (seven and half) ISI MARKED, NO. IS-4148 (DIALOMATIC)

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

• MSME

• STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

• MSME

• COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/288 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

• MSME

• SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

• MSME

• SPECN NO.- HEMRL/MED/PS/289 (MATERIAL GALVANISED STEEL SHEET TO SPECIFICATION NO.- IS 277: 2018) HEMRL DRG. NO.-1460 DETL NO.- 8.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

• MSME

• SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06

• MSME

• SEAL FOR STEEL STRAP 3/4 INCH WIDTH,0.9 MM THICK TO DRG. N0.- OFBA/E/476(ITEM NO. 2)DTD. 30-08-06 .

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

• MSME

• SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

RELAY CABLE FLANGE HEATER.PART NO.F8155800-B.

RELAY CABLE FLANGE HEATER.PART NO.F8155800-B.

PART NO.F8155800-B.

SELF ADHESIVE PVC INSULATION TAPE BLACK 1.9 CM X 10 MTR. X 0.125 MM ROLL OF 10 METER EACH

SELF ADHESIVE PVC INSULATION TAPE BLACK 1.9 CM X 10 MTR. X 0.125 MM ROLL OF 10 METER EACH

TOW HOOK LAMP/REVERSE LIGHT PT.NO. F 2341100 B

TOW HOOK LAMP/REVERSE LIGHT PT.NO. F 2341100 B

PT.NO. F 2341100 B ('A' &'B' Specified in the drawing.

BOSS M12 X 25L ,DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B

BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B

DRG.NO. OFPM 640-01-1050/B PART.NO.640-01-1050-B

SEAT BACK REST DRG. NO. OFPM 640-08-1302/D

SEAT BACK REST DRG. NO. OFPM 640-08-1302/D

OFPM 640-08-1302/D

TROOPER SEAT DRG. NO. OFPM 640-08-1301/B

TROOPER SEAT DRG. NO. OFPM 640-08-1301/B

OFPM 640-08-1301/B

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

RESIN-SHIVAPOL 709. SPECN-(i) DENSITY AT 25 DEG CENT(G/CM- CUBE)-1.0 -0.05(ii)VISCOSITY AT 25 DEG CENT (CPS),900-1200 (iii)HYDROXYL VALUE(MG OF KOH/G),130-150(iv)ACID VALUE(MG/KO H/G),MAX 0.1(v)MOISTURE(%)MAX 0.5,(vi)MOLECULAR WEIGHT(Mn)- 1200-1400(vii)FUNCTIONALITY- 3.0-3.5.

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG .NO. OFBA/CX/54 DT.8.04.93ALTERNATE METHOD, PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN. IS 303-1989 THIRD REV. REAFFIRMED-2003 STEEL FOR RIB SPECN. IS1079-1994 FIFTH REV. OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719 D DC3754-ME DT 12.12.02

REEL 1 A/L FOR PACKAGE AMMUNITION 79-A TO DRG .NO. OFBA/CX/54 DT.8.04.93ALTERNATE METHOD, PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN. IS 303-1989 THIRD REV. REAFFIRMED-2003 STEEL FOR RIB SPECN. IS1079-1994 FIFTH REV. OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719 D DC3754-ME DT 12.12.02

DRG .NO. OFBA/CX/54 DT.8.04.93ALTERNATE METHOD, PLYWOOD FOR GENERAL PURPOSE WWR TYPE BB TO SPECN. IS 303-1989 THIRD REV. REAFFIRMED-2003 STEEL FOR RIB SPECN. IS1079-1994 FIFTH REV. OR IS 513-1994 FOURTH REV VARNISH A/D AMMN TO SPECN IND/ME/719 D DC37

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

• MSME

• HARDENER EH 411/YUVAPOXY 73/RC-206 HEMRL/TRIM/PROP/IM/14, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

• MSME

• RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

• MSME

• RAYON WOOL WHITE COLOURED IN PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13. WIDTH- 1.0 METRE .

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

• MSME

• RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

• MSME

• QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

PVC PASTE RESIN HOMOPOLYMER WHITE POWDER.(1)SP.GR:1.4 (2) INHERENT VISCOSITY :0.84 TO 0.94.(3)K-VALUE(1% CYCLOHEXANON ):61 TO 65. (4) HEAT LOSS: 0.7% MAX (5) APPARENT DENSITY: 0.30 G/ML APPROX.(6)PARTICLE SIZE: 99.0% SHOULD PASS THROUGH 325 MESH.

JSPRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

• MSME

• PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110: 2021 (REVISION NO. 5).

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

• MSME

• POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

POTASSIUM NITRATE-FREE FLOWING TO BOFORS SPECIFICATION NO. W10-28-1

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

• MSME

• Specn. No. IND / ME / 746 ( a ) July 1977 D.C. 3754-ME Dtd. 12-12-02

PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

• MSME

• PVC COMPOUND BROWN CONFORMING TO SPECIFICATION NO IND/ME/801 -DC-3754-ME DT. 12-12-02 COLOUR DARK BROWN TO ISC 412 OF IS 5-2007 Reaffirmed 2017

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

• MSME

• PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

• MSME

• PENTA ERYTHRITOL DI-OLEATE LEAD FREE CONFORMING TO SPECN. JSS:6810-118:2017 (Revision No.2)

MESHED COVER (FT.LIGHT MTG.) DRG.NO. 610-06-2017-1/B

MESHED COVER (FT.LIGHT MTG.) DRG.NO. 610-06-2017-1/B

DRG.NO.610-06-2017-1/B

HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9

HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9

HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8

HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8

HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

PUNCHED WASHER A13 TO TYPE A (14X24X2.5) IS:2016-STEEL -CD PLATED

PUNCHED WASHER A13 TO TYPE A (14X24X2.5) IS:2016-STEEL -CD PLATED

SPRING WASHER A12 IS:3063 CD PLATED

SPRING WASHER A12 IS:3063-CD PLATED

PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED

PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED

PUNCHED WASHER A11 TYPE A (11X21X2) IS:2016-STEEL-CD PLATED

PUNCHED WASHER A11 TYPE A (11X21X2) IS:2016-STEEL-CD PLATED