LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97.

LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97.

LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010.

LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010.

DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).

DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167).

LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)

LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2)

CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A.

CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A.

LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY

LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

FELT DISC, D-21MM,T-3MM TO DRG.NO. ARDE-1905 DET-11,IQX-780,DC NO.35879-A,DT-20.12.94

FELT DISC, D-21MM,T-3MM TO DRG.NO. ARDE-1905 DET-11,IQX-780,DC NO.35879-A,DT-20.12.94

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=200*200*5 to 6.3(MM) SOFT QUALITY SPECN.IND/ME/889 (PROV), DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=280*200*5 to 6.3(MM) SOFT QUALITY TO SPECN.IND/ME/889(PROV),DC NO.3176-ME, DT.12/08/94.

FELT JUTE, SIZE=280*200*5 to 6.3(MM) SOFT QUALITY TO SPECN.IND/ME/889(PROV),DC NO.3176-ME, DT.12/08/94.

FELT DISC(SMALL)SIZE:26MM DIA X 3MM THICK TO SPECN.IS:1719:2000(4RD REVISION AMENDMENT-1) WHITE PRESSED PROOFED.

FELT DISC(SMALL)SIZE:26MM DIA X 3MM THICK TO SPECN.IS:1719:2000(4RD REVISION AMENDMENT-1) WHITE PRESSED PROOFED.

FELT DISC (BIG) SIZE:35MM DIA X 3MM TO SPECN.IS:1719:2000( REVISION-4) WHITE PRESSED PROOFED.

FELT DISC (BIG) SIZE:35MM DIA X 3MM TO SPECN.IS:1719:2000( REVISION-4) WHITE PRESSED PROOFED.

FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.

FELT DISC SOFT (PROOFED)DIA:31.75MM x 6 MM THICK TO SPECN:IS:1719-2000, REF.DRG.NO: CIA/AMN/2176 PART NO.ISX 77 GF,ITEM NO-8. DC:37013-A DT.06.05.2005.

WASHER FELT SOFT(PROOFED)OD:63.5MM ID:35.6MM,3MM THICK TO SPECN:IS:1719-1988(A2) WAXED AND INSERTED WHILST HOT ALTERNATIVELY COMPOSITION RD 1074 OR RD 1064 REF.DRG.NO.CIA/AMN/2176,PART NO:ISX 77 GF,ITEM NO-4 DC: 37013-A DT.06.05.2005.

WASHER FELT SOFT(PROOFED)OD:63.5MM ID:35.6MM,3MM THICK TO SPECN:IS:1719-1988(A2) WAXED AND INSERTED WHILST HOT ALTERNATIVELY COMPOSITION RD 1074 OR RD 1064 REF.DRG.NO.CIA/AMN/2176,PART NO:ISX 77 GF,ITEM NO-4 DC: 37013-A DT.06.05.2005.

FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A, DT-22.06.99.

FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A, DT-22.06.99.

PAD TO DRG.6387456 ,DC.NO-36569-A,DT -22.06.99,FOR 155MM SHELL M107(SIZE-45MM DIA X 10MM THICK)

PAD TO DRG.6387456 ,DC.NO-36569-A,DT -22.06.99,FOR 155MM SHELL M107(SIZE-45MM DIA X 10MM THICK)

PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080,DC NO.36792-A,DT.01.11.2001

PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080,DC NO.36792-A,DT.01.11.2001

INTERNAL FITMENTS FOR BOX M-41A (WOODEN)

INTERNAL FITMENTS FOR BOX M-41A (WOODEN)

• 01. Low Temperature Twin Screw Extrusion Facility 02. Heat Welding Facility 03. Suitable Cutting Facility

• 01. Suitable Measuring Facility

DISC FOR FUZE 162 MARK-8 & DA5A TO CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98.

DISC FOR FUZE 162 MARK-8 & DA5A TO CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98.

SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG/ CUBIC METRE TO SPECN.IS:4671-1984(IST REV.TYPE-2) (REF.DRG.NO.ARDE 2174 PARTNO.ISV 514 GA, DC NO.36017 A,DTD. 28.10.95)

SEPARATOR OF POLY FOAM(278X190X6)MM MATERIAL:EXPANDED POLYSTYRENE FOAM HAVING AVERAGE 18-25 KG/ CUBIC METRE TO SPECN.IS:4671-1984(IST REV.TYPE-2) (REF.DRG.NO.ARDE 2174 PARTNO.ISV 514 GA, DC NO.36017 A,DTD. 28.10.95)

JSS - 03-03-01 FEB., 1970

JSS - 03-03-01 FEB., 1970

MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS- 9160-09:2010 REV-1 DC:5024-ME DT.01.08.11

MIIL BOARD (WAXED),290*200*2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD TO JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 & PARAFFIN WAX AMMN.TO JSS- 9160-09:2010 REV-1 DC:5024-ME DT.01.08.11

MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD TO JSS-9310-01:2014: REV-3 DC NO.5290 ME DT.16.12.14&PARAFFIN WAX AMMN. TO JSS: 9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.

MILL BOARD (WAXED) 200X200X2.5 (MM) (END SUPPORT) USING MATERIAL SPECN.MILL BOARD TO JSS-9310-01:2014: REV-3 DC NO.5290 ME DT.16.12.14&PARAFFIN WAX AMMN. TO JSS: 9160-09 2010-REV-1 DC 5024 ME DT.01.08.11.

Fabric Nylon Knitted Aluminized Coated 100 cm ( Min) Width Specification No-IND/TC/0161

IND/TC/0161. Packing & Marking- As per relevant clause of specification Sampling Plan:- As per relevant clause of specification

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

As Per Requirements & Specifications

As Per Requirements & Specifications

FILTER FOR TNP-350B AS PER DRG. NO. AU7220070

FILTER FOR TNP-350B AS PER DRG. NO. AU7220070

AU7220070

EYELETTING OF CLOSED UPPERS

IND/TC/3844

IS:1531-1972(VARITY NO 2)

IS:1531-1972(VARITY NO 2)

IS:1422-1983(V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2

IS:1422-1983(V.NO.3) REAFF.2000 WITH AMDT.1 OF APR., 87, AMDT.2

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-436

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-436

SEMI MACHINED UNION RING FROM INPUT RAW MATERIAL (I/C: 0334001043) TO OUTPUT MATL SEMI MACHINED DRG. NO:- ISX-492 FOR 40 MM PFFC SHELL

AS PER DRG.& SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

CO-454 B

PARTITION TO PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20.

PARTITION TO PART NO.ISV 227SA DC.35919-A Dt.21.02.95 PACKING OF FUZE 117 MK-20.

PIECE PACKING SIDE PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20.

PIECE PACKING SIDE PART NO.ISV228SA DC.35919A Dt.21.02.95 FOR PACKING OF FUZE 117 MK-20.

• GENERAL PURPOSE CARPENTRY TOOLS.

• SUITABLE MEASURING FACILITY

PIECE PACKING TOP DRG.NO.ISV 460 GA DC-36647-A , DT-22.02.2000 , ITEM NO.06, SIZE:(460X175X20)MM,MATERIAL:EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG/CUBIC METRE FOR PACKING OF FUZE 117 MK-20.

PIECE PACKING TOP DRG.NO.ISV 460 GA DC-36647-A , DT-22.02.2000 , ITEM NO.06, SIZE:(460X175X20)MM,MATERIAL:EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KG/CUBIC METRE FOR PACKING OF FUZE 117 MK-20.

PIECE PACKING BOTTOM "A" PT NO ISV-242 SA DRG NO CQA(A)/AMN/2543.Det-4.DC NO-35099-A DT.31-05-91

PIECE PACKING BOTTOM "A" PT NO ISV-242 SA DRG NO CQA(A)/AMN/2543.Det-4.DC NO-35099-A DT.31-05-91

PIECE PACKING TO PT NO ISV-1775 DRG NO CQA(A)/AMN/2543.DET-3.DC NO -34312-A DT.30.01.88

PIECE PACKING TO PT NO ISV-1775 DRG NO CQA(A)/AMN/2543.DET-3.DC NO -34312-A DT.30.01.88

PIECE PACKING END TO PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Dt-2 DC.35099-A Dt.31-05-91

PIECE PACKING END TO PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Dt-2 DC.35099-A Dt.31-05-91

PIECE PACKING TOP TO PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91

PIECE PACKING TOP TO PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91

PARTITION 410 X 45 X 3 MM TH (5 PLY ITEM NO 9 PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02

PARTITION 410 X 45 X 3 MM TH (5 PLY ITEM NO 9 PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02

PIECE PACKING BOTTOM "B" 448 X 165 X 6 MM TH (5 PLY) ITEM NO 7 PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543.SHEET-1 DC-36814-A DT.15.02.02

PIECE PACKING BOTTOM "B" 448 X 165 X 6 MM TH (5 PLY) ITEM NO 7 PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543.SHEET-1 DC-36814-A DT.15.02.02

PLYWOOD 6 MM (+/-6%) THICKNESS OF SIZE: (8'X4') MR GRADE,TYPE:AB,BRANDED QUALITY TO SPECN. IS: 303(LATEST ISSUE).

PLYWOOD 6 MM (+/-6%) THICKNESS OF SIZE: (8'X4') MR GRADE,TYPE:AB,BRANDED QUALITY TO SPECN. IS: 303(LATEST ISSUE).

AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A Dt.12.07.2013

AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A Dt.12.07.2013

FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.94 (2) HOUSING HOLDER DETONATOR ASSY TO IQX-60 SA DC NO.35879-A DT.20.12.94 (3) STEMMING HOLDER TO IQX-61 SA DC NO.35879-A DT.20.12.94 (4) MAGAZINE TO IQX-781 DC NO.35916-A DT.21.02.95]

FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.94 (2) HOUSING HOLDER DETONATOR ASSY TO IQX-60 SA DC NO.35879-A DT.20.12.94 (3) STEMMING HOLDER TO IQX-61 SA DC NO.35879-A DT.20.12.94 (4) MAGAZINE TO IQX-781 DC NO.35916-A DT.21.02.95]

PRESSURE PAD COVER TO DRG.PT NO. ITX-280 DC 35916-A DT.21.02.95.

PRESSURE PAD COVER TO DRG.PT NO. ITX-280 DC 35916-A DT.21.02.95.

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343 TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TO DRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817 (t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMOVAL ITX 345,PIN LOCKING END CAP ITX343 TRANSIT PIN LOCKING ITX346,PLATE LOCKING ITX286,LOCKING SCREW ITX287 & SPACER PAD ITX342] AND ADAPTER TRANSIT ASSY.TO DRG.PART NO.ITX-35A,DC 35916A,DT.21.2.95 TO SPECN.CQA(A)1817 (t)DC 37096-A,DTD-06.03.07.[EACH SET CONTAINS 01 NO.OF EACH

FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.

FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431), DC NO.35596A DT.01.10.93.

BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431), DC NO.35596A DT.01.10.93.

CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559,DC-35710-A. (4) DISC TO DRG. NO. ISV 2017 DC NO.36449-A,DT.30.7.98.(5)DISC TO DRG NO:ISV-2018 DC 36449-A,DT.30.7.98. (6)SLEEVE-A TO DRG. NO-ISV-2229, DC-37239-A, DT-10.12.09 (7)SLEEVE-B TO DRG. NO-ISV-2230,DC-37239-A, DT-10.12.09

CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559,DC-35710-A. (4) DISC TO DRG. NO. ISV 2017 DC NO.36449-A,DT.30.7.98.(5)DISC TO DRG NO:ISV-2018 DC 36449-A,DT.30.7.98. (6)SLEEVE-A TO DRG. NO-ISV-2229, DC-37239-A, DT-10.12.09 (7)SLEEVE-B TO DRG. NO-ISV-2230,DC-37239-A, DT-10.12.09

CUP TO DRG.NO.ARDE 2043 DET.NO.5 PART NO.ISV-1764 DC NO.36356-A, SPECN.NO.CQA(A) 2804(m) DC NO.36202-A.

CUP TO DRG.NO.ARDE 2043 DET.NO.5 PART NO.ISV-1764 DC NO.36356-A, SPECN.NO.CQA(A) 2804(m) DC NO.36202-A.

CONTAINER TO ARDE-1933, DET-4,PT.NO. ITV 170, DC NO.36207-A, DT.02-12-96 SPECN. CQA(A)-2322(g) DC 37193-A.

CONTAINER TO ARDE-1933, DET-4,PT.NO. ITV 170, DC NO.36207-A, DT.02-12-96 SPECN. CQA(A)-2322(g) DC 37193-A.

AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).

AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).

OBTURATOR TO DESIGNER REF.NO.155- 1140,DC NO.37025-A,DT.08.08.2005.

OBTURATOR TO DESIGNER REF.NO.155- 1140,DC NO.37025-A,DT.08.08.2005.

SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05.

SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05.

GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF.OFBL DRG.NO: BL/PB/U-5/343)..

GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF.OFBL DRG.NO: BL/PB/U-5/343)..

LOCK WASHER DRG. N1/IFL-8233

LOCK WASHER DRG. N1/IFL-8233

LOCK WASHER DRG. N1/IFL-8233

HOUSING TO DSD CAT. NO. 1015-003319

HOUSING TO DSD CAT. NO. 1015-003319

HOUSING TO DSD CAT. NO. 1015-003319

BOSS TO DS CAT. NO. 3040-003304

BOSS TO DS CAT. NO. 3040-003304

BOSS TO DS CAT. NO. 3040-003304

ADJUSTING CLAMP DS. CAT 1015-003983

ADJUSTING CLAMP DS. CAT 1015-003983

ADJUSTING CLAMP DS. CAT 1015-003983

SUPPORT TO DRG. ILG-1821/IWP-1710

SUPPORT TO DRG. ILG-1821/IWP-1710

SUPPORT TO DRG. ILG-1821/IWP-1710

SPRING TO DS CATNO. 5360-004380

SPRING TO DS CATNO. 5360-004380

SPRING TO DS CATNO. 5360-004380

PLUNGER LOCKING DS CAT 1015-000724

PLUNGER LOCKING DS CAT 1015-000724

PLUNGER LOCKING DS CAT 1015-000724

PLUNGER DETENT DS CAT 5340-015300

PLUNGER DETENT DS CAT 5340-015300

PLUNGER DETENT DS CAT 5340-015300

DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30 KG/METER CUBE OD 55x6MM THICK.

DISC POLYTHENE FOAM AVERAGE DENSITY 20 TO 30 KG/METER CUBE OD 55x6MM THICK.

DISC POLYTHENE FOAM OF AVERAGE DENSITY 20 TO 30KG/METER CUBE OD-55MM x 3MM THICK.

DISC POLYTHENE FOAM OF AVERAGE DENSITY 20 TO 30KG/METER CUBE OD-55MM x 3MM THICK.

POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10,PART NO.ISV-1627,DC NO.36832-A,DT.10.5.02.MATERIALLOW DENSITY POLYETHYLENE TYPE-1 TO SPECN:JSS-9330-03:2014REV-3 DC NO.5292 ME,DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.

POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10,PART NO.ISV-1627,DC NO.36832-A,DT.10.5.02.MATERIALLOW DENSITY POLYETHYLENE TYPE-1 TO SPECN:JSS-9330-03:2014REV-3 DC NO.5292 ME,DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

PACKING TO DRG.NO.4-24929/3 K33/001 DC NO.35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME,DT.12.12.02.]

PRESSURE PAD TYPE "A" ASSEMBLY PART ITX 60 SA DC-35916-A DT.21.02.95 AND PRESSURE PAD TYPE "B" ASSEMBLY PART ITX-61SA,DC 35916 A, DTD.21.02.95 TO SPECN.CQA(A) 1817(S), DC-36902-A,DT.10.06.2003 RESPECTIVELY (TO BE SUPPLIED BOTH THE ITEM AS A SET, (EACH SET CONTAINS PRESSURE PAD TYPE-A ASSEMBLY = 03 NOS & PRESSURE PAD TYPE B ASSEMBLY = 01 NO)

PRESSURE PAD TYPE "A" ASSEMBLY PART ITX 60 SA DC-35916-A DT.21.02.95 AND PRESSURE PAD TYPE "B" ASSEMBLY PART ITX-61SA,DC 35916 A, DTD.21.02.95 TO SPECN.CQA(A) 1817(S), DC-36902-A,DT.10.06.2003 RESPECTIVELY (TO BE SUPPLIED BOTH THE ITEM AS A SET, (EACH SET CONTAINS PRESSURE PAD TYPE-A ASSEMBLY = 03 NOS & PRESSURE PAD TYPE B ASSEMBLY = 01 NO)

SENSING ELEMENT (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-39A DC 35916A DT.21.02.95 SPECN. CQA(A) 1817(t) DC 37096-A,DT.06.03.2007 WITH (1) DUST CUP DRG PT NO.ITX-283 DC 35597-A DT.06.10.93 = 01 NO.(2) FASTNER FOR SAFETY PIN CORD DRG.NO.ITX 284 DC 35916-A DT.21.02.95 = 01 NO. (3) DUST COVER DRG PT NO.ITX-285 DC 35916-A DT.21.02.95 = 02 NOS.

SENSING ELEMENT (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-39A DC 35916A DT.21.02.95 SPECN. CQA(A) 1817(t) DC 37096-A,DT.06.03.2007 WITH (1) DUST CUP DRG PT NO.ITX-283 DC 35597-A DT.06.10.93 = 01 NO.(2) FASTNER FOR SAFETY PIN CORD DRG.NO.ITX 284 DC 35916-A DT.21.02.95 = 01 NO. (3) DUST COVER DRG PT NO.ITX-285 DC 35916-A DT.21.02.95 = 02 NOS.

WASHER TO DRG NO.155-1120,DC NO- 36792-A,DT.01.11.2001

WASHER TO DRG NO.155-1120,DC NO- 36792-A,DT.01.11.2001

AMMN CONTAINER BOX M 104 MK-1 FOR FUZE 117 MK-20 DESIGNER REFDD(L)11325 PART NO-SV22A SHEET 1- DC-35994-A SHEET-2 DC-37227-A DT.28.07.09

AMMN CONTAINER BOX M 104 MK-1 FOR FUZE 117 MK-20 DESIGNER REFDD(L)11325 PART NO-SV22A SHEET 1- DC-35994-A SHEET-2 DC-37227-A DT.28.07.09

BOX G-70 MK-1(STEEL) AS PER DESIGNER REF.DD(L) 12919, PART NO.SV68A DC 37270-A,DT.16.11.10. MATER RUST PROOFING & PAINTING AS PER DETAILS IN DRAWING WITH PAINT OF OLIVE GREEN SHADE ISC-220 OF IS-5-2007 WITH SIXTH REVISION AMENDMENT NO.1 SPECN.NO.1A1169(N) DC 35576-A.

BOX G-70 MK-1(STEEL) AS PER DESIGNER REF.DD(L) 12919, PART NO.SV68A DC 37270-A,DT.16.11.10. MATER RUST PROOFING & PAINTING AS PER DETAILS IN DRAWING WITH PAINT OF OLIVE GREEN SHADE ISC-220 OF IS-5-2007 WITH SIXTH REVISION AMENDMENT NO.1 SPECN.NO.1A1169(N) DC 35576-A.

BOX H-60 MKI (INDIA) TO DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET- 1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96

BOX H-60 MKI (INDIA) TO DRG.NO. ARM 1253 D-1,REV.NO-6 DT.27.06.96,DRG LIST NO.ARM 1253 SHEET- 1 REVISION NO.7 DT.01.08.96 SHEET-2 REV-5 DT.31.07.96

AMMUNITION CONTAINER BOX B-9A STEEL TO DESIGNER'S REF: ARDE-2174, SHEET NO.3 PART NO.ISV 553A, DC 35907-A, SPECN IA 1169(n) DC 35576-A BOXES TO BE PAINTED AS PER DRG. WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-2007 WITH 6TH REVISION TO SPECN.IS:168-1993 3RD R APPLICATION OF PRIME-COAT OF RED OXIDE.

AMMUNITION CONTAINER BOX B-9A STEEL TO DESIGNER'S REF: ARDE-2174, SHEET NO.3 PART NO.ISV 553A, DC 35907-A, SPECN IA 1169(n) DC 35576-A BOXES TO BE PAINTED AS PER DRG. WITH PAINT OF SHADE OLIVE GREEN (ISC 220) OF IS:5-2007 WITH 6TH REVISION TO SPECN.IS:168-1993 3RD R APPLICATION OF PRIME-COAT OF RED OXIDE.

STEEL TAPE (BLUED OR SUITABLY RUST PROOFED) TO SIZE:- 0.5 TO 0.56MM THICK & 13MM WIDE TO SPECN. IS:5872-1990.

STEEL TAPE (BLUED OR SUITABLY RUST PROOFED) TO SIZE:- 0.5 TO 0.56MM THICK & 13MM WIDE TO SPECN. IS:5872-1990.

SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14.

SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14.

HIGH TENSILE STEEL STRAP TO IS:5872 -1990,GRADE-1,REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE :19.05MM WIDTH x 0.63MM THICK) NOTE:MAXIMUM OUTER DIAMETER OF THE ROLL=600MM,INNER DIAMETER OF THE ROLL=300+10MM,WEIGHT OF ONE ROLL = 50 KGS MAXIMUM AND MAXIMUM NUMBER OF LAYERS IN ONE ROLL=02.

HIGH TENSILE STEEL STRAP TO IS:5872 -1990,GRADE-1,REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE :19.05MM WIDTH x 0.63MM THICK) NOTE:MAXIMUM OUTER DIAMETER OF THE ROLL=600MM,INNER DIAMETER OF THE ROLL=300+10MM,WEIGHT OF ONE ROLL = 50 KGS MAXIMUM AND MAXIMUM NUMBER OF LAYERS IN ONE ROLL=02.

WAX PAPER KRAFT CUP DISC TYPE,SIZE: 194 DIA+/- 1MM ,THICKNESS-0.18MM)MATERIAL:PAPER KRAFT AMMN. TO SPECN:JSS-8135-17:2016 REV-1 SUBSTANCE:125+/-5GSM (NOTE-MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN:JSS- 9160-06-2002 REV-2, REFD-2011, DC NO-5047-ME, DT.15.12.11

WAX PAPER KRAFT CUP DISC TYPE,SIZE: 194 DIA+/- 1MM ,THICKNESS-0.18MM)MATERIAL:PAPER KRAFT AMMN. TO SPECN:JSS-8135-17:2016 REV-1 SUBSTANCE:125+/-5GSM (NOTE-MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN:JSS- 9160-06-2002 REV-2, REFD-2011, DC NO-5047-ME, DT.15.12.11

LINK EJECTION CHUTE ASSEMBLY / DEFLECTION PLATE TO DRG. NO. 675-51-CD-1413-CB

LINK EJECTION CHUTE ASSEMBLY / DEFLECTION PLATE TO DRG. NO. 675-51-CD-1413-CB

DRG. NO. 675-51-CD-1413-CB