IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

REGULATOR GAS TO (ICR 1247) DRG.NO. TEND 1877*4

AS PER (ICR 1247) DRG.NO. TEND 1877*4

(ICR 1247) DRG.NO. TEND 1877*4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING PLATFORM TO DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)

AS PER DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)

DS. CAT. NO. 5360-007080 DA.No.003/16 DATED 23.02.2016 (ICR-1508)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).

AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).

DRG. NO. TEND 1805*2 (ICR-1290).

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.D.C.No.26761-SA.DATED:10.06.15.(FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1271)

as per ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.D.C.No.26761-SA.DATED:10.06.15.(FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1271)

icr -1271

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLOCK HOUSING. TO DRG.NO. TEND 1888 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) FOR (ICR 1302)

AS PER DRG.NO. TEND 1888 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) FOR (ICR 1302)

DRG.NO. TEND 1888 (ICR 1302)

BLOCK BREECH (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)

AS PER (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)

(ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).

AS PER DRG. NO. TEND 1692* (ICR 1576)

DRG. NO. TEND 1692* (ICR 1576)

WASHER TUBE RECOIL TO D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)

AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)

D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RING RETAINING GAS REGULATOR TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED

AS PER DRG TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED

D.S. CAT NO.5365-010326

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ROD, CLEANING, 7.62mm BARREL GAS CYLINDER 1A. D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.

AS PER D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.

D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.

NUT LOCK FORESIGHT TO D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.

AS PER D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.

D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000 (ICR-1493)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RIVET AXIS LOCKING PLATE D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)

AS PER D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)

D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1

AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1

DRG. NO.TEND 1905 (ICR-66 SA)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL

AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL

D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03.

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF PIN AXIS TRIGGER AND SEAR TO D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)

AS PER D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)

D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (ICR - 1220)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF SLEEVE PISTOL GRIP TO D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

AS PER D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG. & SUPPLY OF PLUNGER LEVER CHANGE TO DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315

AS PER DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315

DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 (ICR - 1315)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER POSITIONING FLASH ELIMINATOR TO TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).

AS PER TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).

TEND:1939* (ICR 1250, 1577, 1578, 1579 & 1580).

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUNGER RETURN SPRING TO D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001

AS PER D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001

D.S. CAT NO.1005-001672 (ICR 1228)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW RETAINING LOCKING CATCH LEVER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98

AS PER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98

DS.CAT.NO.5305-005005 (ICR 1222)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN,EJECTOR LOWER TO DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)

AS PER DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)

DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 (ICR-1327)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN EJECTOR UPPER TO DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)

AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)

DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 (ICR-1326)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLUNGER TO D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)

AS PER D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)

D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 (ICR-1295)

PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)

AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)

D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 (ICR-1269)

SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)

AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)

DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 (1CR-1230)

SUPPLY OF PLUNGER EXTRACTOR TO DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED

AS PER DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED

DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING GAS CYLINDER TO D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)

AS PER D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)

D.S CAT NO.5315-001760 (ICR 1245)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN COCKING HANDLE TO D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

D.S. CAT NO.5315-009175 (ICR 1288)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW ZEROING BACK SIGHT TO D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)

AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)

D.S. CAT NO.5305-018164 (ICR 1229)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FERRULE BUTT TO D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)

AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)

D.S. CAT NO.1005-001613 (ICR 1207)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW FRONT SLING LOOP TO D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)

AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)

D.S. CAT NO.5305-004999 (ICR 1206)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SELF TAPPING SCREW TO DRG NO.TRD 121932.

SELF TAPPING SCREW TO DRG NO.TRD 121932.

SELF TAPPING SCREW TO DRG NO.TRD 121932.

SECURING LACQUER MF-43-313H BECKERS QUALITY FG-1-2-246 GREEN

SECURING LACQUER MF-43-313H BECKERS QUALITY FG-1-2-246 GREEN

SECURING LACQUER MF-43-313H BECKERS QUALITY FG-1-2-246 GREEN

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

SAFETY SPRING TO TRD DRG NO.1-2-2189/DRG NO.6416839

PRESSURE DIE CASTING OF BODY TNPO.17OA DRG.NO. B-26/DC/8020251/173 M1

PRESSURE DIE CASTING OF BODY TNPO.17OA DRG.NO. B-26/DC/8020251/173 M1

B-26/DC/8020251/173 M1

QUARTER PIN TO DRG.NO.TRD 121934.

QUARTER PIN TO DRG.NO.TRD 121934.

QUARTER PIN TO DRG.NO.TRD 121934.

• uploaded soon

• uploaded soon

HARDENER W51-127-1.

HARDENER W51-127-1.

HARDENER W51-127-1.

EPOXY RESIN W50-108-1

EPOXY RESIN W50-108-1

EPOXY RESIN W50-108-1

SAND BLASTING, ANODIZING/PHOSPHATING, MASKING & PAINTING OF TNPO-170A SET OF 6 COMPONENT (TNPO 170A BODY, BOTTOM, COVER, SHUTTER, ANGLE PIECE LEFT, ANGLE PIECE RIGHT) AS PER DRG. No. AU-8020251, 8040080, 8050073, 8642006, 8010024 & 8010025.

SAND BLASTING, ANODIZING/PHOSPHATING, MASKING & PAINTING OF TNPO-170A SET OF 6 COMPONENT (TNPO 170A BODY, BOTTOM, COVER, SHUTTER, ANGLE PIECE LEFT, ANGLE PIECE RIGHT) AS PER DRG. No. AU-8020251, 8040080, 8050073, 8642006, 8010024 & 8010025.

CLAPPER PIN ASSEMBLY TO DRG NO.TBRL/MMG-H/MK-I/A41/RO.

CLAPPER PIN ASSEMBLY TO DRG NO.TBRL/MMG-H/MK-I/A41/RO.

CLAPPER PIN ASSEMBLY TO DRG NO.TBRL/MMG-H/MK-I/A41/RO.

• attached

• attached

DETENT ZEROING SCREW D.S. CAT. NO. 1005-001599 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16 TO BE FOLLOWED

AS PER D.S. CAT. NO. 1005-001599 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16 TO BE FOLLOWED

D.S. CAT. NO. 1005-001599 (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STUD LEVER LOCK TO D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)

AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)

D.S. CAT NO.1005-001659 (ICR 1321)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

KNOB LEVER LOCK TO D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)

AS PER D.S. CAT NO.1005-001656 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1318)

D.S. CAT NO.1005-001656 (ICR 1318)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN RETAINING LOCKING CATCH TO D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)

AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)

D.S. CAT. NO.5315-001773 (ICR 1221)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO:TEND.1141 FOR CATCH COCKING HANDLE. (ICR-1287)

AS PER IC TO DRG.NO:TEND.1141 FOR CATCH COCKING HANDLE. (ICR-1287)

DRG.NO:TEND.1141 (ICR-1287)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.:TEND.921 E FOR GRIP CATCH (ICR-1297) (WITH FIRM'S MATERIAL)

AS PER IC TO DRG.NO.:TEND.921 E FOR GRIP CATCH (ICR-1297) (WITH FIRM'S MATERIAL)

DRG.NO.:TEND.921 E (ICR-1297)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.

ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STUD, COCKING HANDLE. D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)

AS PER D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)

D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)

• AS PERDRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

HAMMER FORGINGS TO DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)

AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)

DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG. & SUPPLY OF PIN RESTRICTING GAS REGULATOR TO DS CAT NO.5315-001756 DC NO. 24275-SA DT. 26/02/99 REQUIRED IN WHITE FINISHED CONDITION.

AS PER DS CAT NO.5315-001756 DC NO. 24275-SA DT. 26/02/99 REQUIRED IN WHITE FINISHED CONDITION.

DS CAT NO.5315-001756 DC NO. 24275-SA DT. 26/02/99 REQUIRED IN WHITE FINISHED CONDITION.

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLOCK GAS FORGING TO DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)

AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)

DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INPUT BLANKS OF BLOCK GAS TO TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)

AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)

TEND 1966* (ICR- 1322)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FORE SIGHT D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.

AS PER D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.

D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015

RING RETAINING HAND GUARDS DS CAT NO.1005-001526. DC NO. 26759-SA DT.29.05.15, FOR DC.NO.LATEST ISSUE TO BE FOLLOWED. FOR ICR 1249.

AS PER DS CAT NO.1005-001526. DC NO. 26759-SA DT.29.05.15, FOR DC.NO.LATEST ISSUE TO BE FOLLOWED. FOR ICR 1249.

DS CAT NO.1005-001526. DC NO.26759-SA DT.29.05.15, FOR DC.NO.LATEST ISSUE TO BE FOLLOWED. ( ICR 1249)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)

AS PER DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)

DRG.NO.:TEND.720 F/ALT FOR LEAF BACKSIGHT (ICR-1330)

PISTON TO DRG.No. TEND-1865*2

AS PER PISTON TO DRG.No. TEND-1865*2

DRG.No. TEND-1865*2

SUPPLY OF SPRING HAMMER TO D.S. CAT. NO.5360-000742 DA.No.003/16 Dt. 23.06.2016 (ICR 1334)

AS PER D.S. CAT. NO.5360-000742 DA.No.003/16 Dt. 23.06.2016 (ICR 1334)

D.S. CAT. NO.5360-000742 DA.No.003/16 Dt. 23.06.2016 (ICR 1334)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LOOP SLING FRONT TO DRG.NO.D.S.CAT NO.1005-001554 D.C.NO. 26760-SA DATED:05.06.15 ( ICR 1211 ) FOR DC. NO. LATEST ISSUE TO BE FOLLOWED

AS PER DRG.NO.D.S.CAT NO.1005-001554 D.C.NO.26760-SA DATED:05.06.15 ( ICR 1211 ) FOR DC. NO. LATEST ISSUE TO BE FOLLOWED

DRG.NO.D.S.CAT NO.1005-001554 D.C.NO.26760-SA DATED:05.06.15 ( ICR 1211 ) FOR DC. NO. LATEST ISSUE TO BE FOLLOWED

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)(WTIH FIRM'S MATERIAL)

AS PER DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)(WTIH FIRM'S MATERIAL)

DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF RIVET SECURING EXTENSION FOR D.S.CAT. NO.5320 - 001015, DC No. 19703 SA DATED 05.08.87 (ICR 1417)

AS PER D.S.CAT. NO.5320 - 001015, DC No. 19703 SA DATED 05.08.87 (ICR 1417)

D.S.CAT. NO.5320 - 001015, DC No. 19703 SA DATED 05.08.87 (ICR 1417)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.TEND.1009 D FOR EXTENSION DS.CAT.NO.1005-001634 D.C. NO.LATEST ISSUE TO BE FOLLOWED (ICR-1305)(WITH FIRM'S MATERIAL)

IC TO DRG.NO.TEND.1009 D FOR EXTENSION DS.CAT.NO.1005-001634 D.C. NO.LATEST ISSUE TO BE FOLLOWED (ICR-1305)(WITH FIRM'S MATERIAL)

DRG.NO.TEND.1009 D DS.CAT.NO.1005-001634 D.C. NO.LATEST ISSUE TO BE FOLLOWED (ICR-1305)(WITH FIRM'S MATERIAL)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

AS PER IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WRENCH, ADJUSTING FORESIGHT & LOCK NUT FORE SIGHT TO DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)

AS PER DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)

R.F.I.SK.NO.1051 *3 (MODIFIED)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF SCREW PISTOL GRIP TO D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED

AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED

D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG.NO.:TEND.920 D FOR TRIGGER.(ICR-1238)

AS PER DRG No.TEND 920D ICR -1238

TEND 920D

MFG & SUPPLY OF PIN LEAF TO D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

AS PER D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PIN AXIS HAMMER TO DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION . FOR DC NO. LATTEST ISSUE TO BE FOLLOWED. (WITH FIRMS MATER

AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281)

AS PER DRAWING

ICR-1281

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW HAND GUARD TO D.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

AS PERD.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

(ICR 1196) D.S.CAT. NO. 5305-005008 DC NO.24312-SA

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW LOCKING HINGE PIN D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

(ICR-1195) D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

BLANK FIRING ATTACHMENT 7.62 MM 1A. DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.

AS PER DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.

DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED

HDPE GRADE B52A003 (GAIL)/W43006(RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534.

HDPE GRADE B52A003 (GAIL)/W43006(RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534.

HEATED PRISM TO DRG NO ATS5935132

HEATED PRISM TO DRG NO ATS5935132

ATS5935132

HEATED PRISM TO DRG. NO. ATS5935080

HEATED PRISM TO DRG. NO. ATS5935080

ATS5935080

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).