CARBON STEEL ROD 54 MM.DIA. IS:4072 1975 GD-1, 55C6

CARBON STEEL ROD 54 MM.DIA. IS:4072 1975 GD-1, 55C6

CARBON STEEL ROD 32 MM [1-1/4"] DIA IS:1570(PART-2)-1979, 30C8

CARBON STEEL ROD 32 MM [1-1/4"] DIA IS:1570(PART-2)-1979, 30C8

STEEL ROD 16 MM DIA. IS:5517-1983 DESIG.30 C 8

STEEL ROD 16 MM DIA. IS:5517-1983 DESIG.30 C 8

STEEL ROD 13 MM DIA. IS:1570(PART-2)-1979, 30C8

STEEL ROD 13 MM DIA. IS:1570(PART-2)-1979, 30C8

STEEL SHEET 1.6 MM THICK BS-1449 PT.2B/EN 2A DEEP DRAWING QUALITY

STEEL SHEET 1.6 MM THICK BS-1449 PT.2B/EN 2A DEEP DRAWING QUALITY

STEEL ROD 28MM DIA BS: 970 PT. 1-1985 GDE. B17 M40 OR STEEL ROD OF IS:5517- -1993 DESG. 40 NI6 CR4 MO3.

STEEL ROD 28MM DIA BS: 970 PT. 1-1985 GDE. B17 M40 OR STEEL ROD OF IS:5517- -1993 DESG. 40 NI6 CR4 MO3.

MILD ST.FLAT 13MMX50MM (1/2"X2-1/ 4") W. SPECN. IS-1570/C-15

MILD ST.FLAT 13MMX50MM (1/2"X2-1/ 4") W. SPECN. IS-1570/C-15

CARBON STEEL FLAT 1/2" ( 12.70 MM ) X 1-1/2" ( 38.10 MM ) WIDE. C25 OF IS:7283

CARBON STEEL FLAT 1/2" ( 12.70 MM ) X 1-1/2" ( 38.10 MM ) WIDE. C25 OF IS:7283

STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975

STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975

M.S. ROD 6.00 MM(1/4") DIA. AS PER SEPCN IS-2073/C-20 IN STAIGHT LENGTH.

M.S. ROD 6.00 MM(1/4") DIA. AS PER SEPCN IS-2073/C-20 IN STAIGHT LENGTH.

M.S.ROD 5.0 MM DIA (3/16") IS-1570 C/20 IN STRAIGHT LENGTH. (NOT COILED) IS-1570 C/20

M.S.ROD 5.0 MM DIA (3/16") IS-1570 C/20 IN STRAIGHT LENGTH. (NOT COILED) IS-1570 C/20

MILD STEEL ROD 8 SWG (0.16"/4.064 MM ) AS PER SPECN.IS -280 /1972. 1/4 HARD. IN STRAIGHT STANDARD LENGTH.

MILD STEEL ROD 8 SWG (0.16"/4.064 MM ) AS PER SPECN.IS -280 /1972. 1/4 HARD. IN STRAIGHT STANDARD LENGTH.

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TOSP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

ECN.JSS:9510-06-2000

MILD STEEL ROD 3.15 MM BS-970/EN-3 B.

MILD STEEL ROD 3.15 MM BS-970/EN-3 B.

M.S. ROD 6.MM DIA. BS-970/EN-3 D.

M.S. ROD 6.MM DIA. BS-970/EN-3 D.

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

STEEL ROD 22.00 MM DIA.AS PER SPECN. TO IS-7283,10S25.

STEEL ROD 22.00 MM DIA.AS PER SPECN. TO IS-7283,10S25.

MILD STEEL ROD 73 MM[2-7/8'']DIA AS PER SPECN.BS-970/EN-3A.

MILD STEEL ROD 73 MM[2-7/8'']DIA AS PER SPECN.BS-970/EN-3A.

PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION.

PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION.

DS CAT.5315-001552

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02

RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

DS CAT NO. 5315-001530

• Machining

• As per drawing

RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION.

RIVET,REAR PLATE TO DS CAT NO. 5320-002189 DC NO. 27016-SA DT- 19.01.2017 IN FINISHED CONDITION.

5320-002189

SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96

SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96

DS CAT NO. 1005-000653

SECURING NUT, BUFFER ASSEMBLY PART NO. 1/135 TO DS CAT NO. 5305-004283 DC(I) NO. 25343-SA DT-26.4.02 (MATERIAL ALUMINIUM ALLOY RD 1-3/8" (34.925MM) DIA. SPECN. BS:1474-1987,2014A,T6HEAT TREATMENT MIN.110HB 10/500(130 HV)AGAINST LF NO.0611500035 WILL BE SUPLIED BY SAF AGAINST B/G)

SECURING NUT, BUFFER ASSEMBLY PART NO. 1/135 TO DS CAT NO. 5305-004283 DC(I) NO. 25343-SA DT-26.4.02 (MATERIAL ALUMINIUM ALLOY RD 1-3/8" (34.925MM) DIA. SPECN. BS:1474-1987,2014A,T6HEAT TREATMENT MIN.110HB 10/500(130 HV)AGAINST LF NO.0611500035 WILL BE SUPLIED BY SAF AGAINST B/G)

DS CAT NO. 5305-004283

SPRING, LINK PIN TO DS CAT NO. 1005-000567 DC(I) NO. 27107-SA DT- 21/06/2017 IN FINISHED CONDITION.

SPRING, LINK PIN TO DS CAT NO. 1005-000567 DC(I) NO. 27107-SA DT- 21/06/2017 IN FINISHED CONDITION.

1005-000567

STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM

STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM

SKM-282*4.

• Forging

• Chemical and Mechanical properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

M.S. ROD 35.00 MM (1-3/8 INCH) DIA. IS-2073, C-20 SUPPRESED TO IS: 7283-1992

M.S. ROD 35.00 MM (1-3/8 INCH) DIA. IS-2073, C-20 SUPPRESED TO IS: 7283-1992

MILD STEEL ROD 60 MM[2-3/8'']DIA . AS PER SPECN. BS: 970/EN-2A

MILD STEEL ROD 60 MM[2-3/8'']DIA . AS PER SPECN. BS: 970/EN-2A

M.S.ROD 45 MM DIA IS-2073/C-20 SUPPRESED TO IS: 7283-1992

M.S.ROD 45 MM DIA IS-2073/C-20 SUPPRESED TO IS: 7283-1992

MILD STEEL ROD 13 MM ( 1/2 ") DIA TO IS-2073. C-20 IS-2073. C-20

MILD STEEL ROD 13 MM ( 1/2 ") DIA TO IS-2073. C-20 IS-2073. C-20

M.S.ROD 32 MM[1-1/4"] DIA. IS: 1570(PT-II)-1979 30 C8

M.S.ROD 32 MM[1-1/4"] DIA. IS: 1570(PT-II)-1979 30 C8

M.S.ROD 32.00 MM DIA. IS-2073.C-20

M.S.ROD 32.00 MM DIA. IS-2073.C-20

MILD STEEL ROD 22MM DIA (7/8") CONFORMING TO IS-4432/C-10

MILD STEEL ROD 22MM DIA (7/8") CONFORMING TO IS-4432/C-10

MILD STEEL ROD 10 MM (3/8") DIA.SPECN. IS-2073/C-20

MILD STEEL ROD 10 MM (3/8") DIA.SPECN. IS-2073/C-20

STEEL SHEET 1.25 MM THICK, GDE-ISH410S TO IS:5986-2017, SIZE-4FT X 8FT X 1.25 MM THICK & PACKED TO AVOID RUSTING DURING TRANSIT.

STEEL SHEET 1.25 MM THICK, GDE-ISH410S TO IS:5986-2017, SIZE-4FT X 8FT X 1.25 MM THICK & PACKED TO AVOID RUSTING DURING TRANSIT.

• as attached

• as attached

STEEL ROD 6MM DIA SPECIFIDATION IS:2073-1970 C-20 SUPPRESED TO IS: 7283

STEEL ROD 6MM DIA SPECIFIDATION IS:2073-1970 C-20 SUPPRESED TO IS: 7283

DRNG. NO.ADRDE/1402-03-002

DRNG. NO.ADRDE/1402-03-002

DRNG. NO.ADRDE/1402-03-002

M.S. ROD 3.MM DIA. BS-970/EN-3B. BS-970/EN-3B.

M.S. ROD 3.MM DIA. BS-970/EN-3B. BS-970/EN-3B.

MILD STEEL WIRE 2.032MM (14 SWG) SPECI -BS- 1052 OR IS - 280.

MILD STEEL WIRE 2.032MM (14 SWG) SPECI -BS- 1052 OR IS - 280.

M.S WIRE 3.18 MM (10 BG ) IS-7887-1992

M.S WIRE 3.18 MM (10 BG ) IS-7887-1992

MILD STEEL WIRE 2.03MM (14 SWG) AS PER SPECIFICATION IS-280/1978

MILD STEEL WIRE 2.03MM (14 SWG) AS PER SPECIFICATION IS-280/1978

M.S.ROD 5/8" DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

M.S.ROD 5/8" DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )

SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S'

SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 EST PIECE TO BE TESTED IN `Z' CONDITION.

SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.

SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40

STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A ANDSATISFY THE MACHINEABILITY TEST AT OUR END.

STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A ANDSATISFY THE MACHINEABILITY TEST AT OUR END.

SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.

BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C

BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C

BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C

SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB.

SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB.

SPECNIS:5517-1993 DESIG.42CR4MO2

SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)

SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)

SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29

STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.

STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.

SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 I

• Melting & Rolling

• As per attachment

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 I

• Melting & Rolling

• As per attachment

STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17AS PER DRG.

STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17

DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17

STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.

STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.

DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011

• Machining

• As per drawing

DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.

DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17

M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

M.S. SHEET 1.60MM FE 410 IS:1079-1988

M.S. SHEET 1.60MM FE 410 IS:1079-1988

STEEL SHEET 2.00 MM THICK, GDE- ISH410S TO IS: 5986-2017

STEEL SHEET 2.00 MM THICK, GDE- ISH410S TO IS: 5986-2017

COLD ROLLED LOW CARBON STEEL SHEET 1.00 MM THICK .AS PER SPECN.IS-513-1994 D OR DD ( DRAWING QUALITY) SIZE-4X8 FEETS. BEST SURFACE,PROPERLY GREASED & PACKED TO AVOID RUSTING DURING TRANSIT. (PACK.SHOULD BE UP TO 2 TONS ONLY)

COLD ROLLED LOW CARBON STEEL SHEET 1.00 MM THICK .AS PER SPECN.IS-513-1994 D OR DD ( DRAWING QUALITY) SIZE-4X8 FEETS. BEST SURFACE,PROPERLY GREASED & PACKED TO AVOID RUSTING DURING TRANSIT. (PACK.SHOULD BE UP TO 2 TONS ONLY)

CARBON STEEL SHEET 1 MM THICK TO IS:1079-2017, GDE - HR1

CARBON STEEL SHEET 1 MM THICK TO IS:1079-2017, GDE - HR1

STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.TEST PIECE TO BE TESTED AS PER SPECN.MACROETCH & NMIR TEST AS PER STORE DRG. CLEANLINESS TEST A SEPERATE TP TO BE HEAT TREATED TO ACHIEVE HARDNESS 45-61 HRC.T0 BE ULTRASONICALLY TESTED.(REQD.PISTON)

SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.

STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 TEST PIECE TO TESTED AS PER ANNEXURE-A NATURE-C. (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)

SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),

DRG.NO.SKM-309*1

DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.

DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.

DRG. NO. SKM-303*5

DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.

DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.

DRG.NO.SKM-281*2 'NI'

STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT

STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT

SPECN: BS:970: PT-3 1991:GD.835M15

STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)

STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)

SPECN.BS:970:PT-1:1983 GD.080M40

MILD STEEL SHEET 1.6 MM THICK AS PER IS-513/1994 GRDE-DHALF HARD,BEST SURFACE FEET. THE SHEETS SHOULD BE RUST FREE, PROPRELY GREASED & PACKED TO AVOID RUST- ING DURING TRANSIT.COLD ROLLED AND ANNEALED.

MILD STEEL SHEET 1.6 MM THICK AS PER IS-513/1994 GRDE-DHALF HARD,BEST SURFACE FEET. THE SHEETS SHOULD BE RUST FREE, PROPRELY GREASED & PACKED TO AVOID RUST- ING DURING TRANSIT.COLD ROLLED AND ANNEALED.

M.S.FLAT 10 X 25 MM [3/8''X1.0''] BS-970/EN-3A

M.S.FLAT 10 X 25 MM [3/8''X1.0''] BS-970/EN-3A

M.S.SHEET 18 SWG IS: 513-1986 GDE-"O" 1/2 HARD

M.S.SHEET 18 SWG IS: 513-1986 GDE-"O" 1/2 HARD

MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079

MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079

M.S.ROD 12MM" DIA (1/2" ) IS 2073,C-20 IS 2073-1970

M.S.ROD 12MM" DIA (1/2" ) IS 2073,C-20 IS 2073-1970

SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)

SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)

SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

• As per attachment

• As per attachment

STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)

STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)

DRG. NO. SKM- 889

St Forging Cylinder Gas Drg No SKM 306 star 5

St Forging Cylinder Gas Drg No SKM 306 star 5

SKM 306 STAR 5

DRG. NO. SKM-304*1

DRG. NO. SKM-304*1

DRG. NO. SKM-304*1

SPECN IS:6603-2001;DISIGNATION X12CR12 ORX20CR13.

SPECN IS:6603-2001;DISIGNATION X12CR12 ORX20CR13.

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

• As per attachment

• as per attachment

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.

DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02