ALLUMINIUM SHEET 1.6 MM THICK (SIZE 8'X4') IS-737/19000 H2 PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & SU ITABLE FOR PHOTO ETCHING WITH INTER LEAF PUCKING TO AVOID SCRATCHES IN TRANSIT.

ALLUMINIUM SHEET 1.6 MM THICK (SIZE 8'X4') IS-737/19000 H2 PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & SU ITABLE FOR PHOTO ETCHING WITH INTER LEAF PUCKING TO AVOID SCRATCHES IN TRANSIT.

ALLUMINIUM SHEET 32 SWG 0.0108"/0.2743MM IS-737 /1986 19000-H

ALLUMINIUM SHEET 32 SWG 0.0108"/0.2743MM IS-737 /1986 19000-H

Seamless Steel Tube to specn. BS: 6323 Pt.- 4/1982 CFS 5 in BKW condition to size: “O/D=20mm (+/-0.20) X W/T= 2.25 (+/-0.225) in running length of 4 to 7 meters (required for Vane Tube to Drg. No. SK-9750)

Seamless Steel Tube to specn. BS: 6323 Pt.- 4/1982 CFS 5 in BKW condition to size: “O/D=20mm (+/-0.20) X W/T= 2.25 (+/-0.225) in running length of 4 to 7 meters (required for Vane Tube to Drg. No. SK-9750)

Drg. No. SK-9750

ALU.ALLOY FLAT 23 MM X 45 MM WIDTH IS-733/HE-15 OR 24345

ALU.ALLOY FLAT 23 MM X 45 MM WIDTH IS-733/HE-15 OR 24345

ALLUMINIUM ALLOY BAR 1-1/4" SQUARE TO SPECIPICATION IS-733/24345 WP CONDITION

ALLUMINIUM ALLOY BAR 1-1/4" SQUARE TO SPECIPICATION IS-733/24345 WP CONDITION

ALUMINIUM ALLOY FLAT 1-1/2" THICK X2.00" WIDE TO SPECIFICATION IS-733-1983 64430 WP

ALUMINIUM ALLOY FLAT 1-1/2" THICK X2.00" WIDE TO SPECIFICATION IS-733-1983 64430 WP

ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN. IS-733/1983, HE-15WP

ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN. IS-733/1983, HE-15WP

ALUMINIUM ALLOY ROD 95 MM(3-3/4) DIA TO SPECIFICATION IS-733/1983 OF DESIGN. 24345 IN WP CONDITION

ALUMINIUM ALLOY ROD 95 MM(3-3/4) DIA TO SPECIFICATION IS-733/1983 OF DESIGN. 24345 IN WP CONDITION

ALUMINIUM ALLOY ROD 50 MM DIA IS 733-1983 64430 WP

ALUMINIUM ALLOY ROD 50 MM DIA IS 733-1983 64430 WP

ALUMINIUM ALLOY ROD 39 MM DIA TO IS-733/ 1983.GRADE-64430 (HE-30)

ALUMINIUM ALLOY ROD 39 MM DIA TO IS-733/ 1983.GRADE-64430 (HE-30)

ALUMINIUM ALLOY ROD 30 MM DIA SPECN.IS 733/1983 64430 WP

ALUMINIUM ALLOY ROD 30 MM DIA SPECN.IS 733/1983 64430 WP

ALUM.ALLOY ROD 52 MM DIA.IS-733/1983 GR.24345 IN WP CONDITION

ALUM.ALLOY ROD 52 MM DIA.IS-733/1983 GR.24345 IN WP CONDITION

ALUMINIUM ALLOY ROD 35.MM DIA IS-733/ 1983 OF DESIGN.24534 IN WP CONDITION.

ALUMINIUM ALLOY ROD 35.MM DIA IS-733/ 1983 OF DESIGN.24534 IN WP CONDITION.

Drill Cotton Disruptive Pattern VAT Printed Mineral khaki 142 cms

IND/ME/975(Prov)

ALUMINIUM ALLOY ROD 17 MM DIA.IS-733 DESIGNATION OF IS-733-63400 IN WP COND. IS-733-63400 IS 733 64430WP

ALUMINIUM ALLOY ROD 17 MM DIA.IS-733 DESIGNATION OF IS-733-63400 IN WP COND. IS-733-63400 IS 733 64430WP

ALUM.ALLOY ROD 21 MM DIA IS-733/1983 GR.64430 IN WP CONDITION

ALUM.ALLOY ROD 21 MM DIA IS-733/1983 GR.64430 IN WP CONDITION

NON-MAGNETIC BRASS INGOTS TO SPECN. IS- 1264/CU ZN 40 (DBC-1)

NON-MAGNETIC BRASS INGOTS TO SPECN. IS- 1264/CU ZN 40 (DBC-1)

H.T. BRASS ROD 6.35 MM DIA. TO SPECN. IS-320/1980 ALLOY-3

H.T. BRASS ROD 6.35 MM DIA. TO SPECN. IS-320/1980 ALLOY-3

BRASS ROD 3MM DIA IS-319 TYPE I 1/2 HARD

BRASS ROD 3MM DIA IS-319 TYPE I 1/2 HARD

BRASS ROD 54 MM DIA. TO SPEC. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 54 MM DIA. TO SPEC. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 15 MM DIA. BS:2874-1969-CZ 122 M

BRASS ROD 15 MM DIA. BS:2874-1969-CZ 122 M

BRASS ROD 20MM DIA TO IS-319/TYPE 1- HALF HARD

BRASS ROD 20MM DIA TO IS-319/TYPE 1- HALF HARD

BRASS ROD 83 MM DIA TO SPCN. IS-319/ 1989 TYPE-I HALF HARD

BRASS ROD 83 MM DIA TO SPCN. IS-319/ 1989 TYPE-I HALF HARD

BRASS ROD 41.MM.DIA.(1-5/8") DIA.AS PER SPECN.IS-4170/CU.ZN-30.

BRASS ROD 41.MM.DIA.(1-5/8") DIA.AS PER SPECN.IS-4170/CU.ZN-30.

BRASS ROD 6 MM DIA.IS-319 TYPE-1.

BRASS ROD 6 MM DIA.IS-319 TYPE-1.

BRASS SHEET 0.279 MM X 356 MM WIDE TO SPECN. IS-410/CU ZN 37.

BRASS SHEET 0.279 MM X 356 MM WIDE TO SPECN. IS-410/CU ZN 37.

BRASS SHEET 0.38 MM (28 SWG) X 1220MM SPECN. IS-410/CU ZN 37 ,HB

BRASS SHEET 0.38 MM (28 SWG) X 1220MM SPECN. IS-410/CU ZN 37 ,HB

GUN METAL ROD 22.22MM DIA IS-306 DRAWN CONDITION

GUN METAL ROD 22.22MM DIA IS-306 DRAWN CONDITION

GUN METAL FLAT 32MM W X 19MM THICK TO SPECIFICATION IS-306/1983.

GUN METAL FLAT 32MM W X 19MM THICK TO SPECIFICATION IS-306/1983.

BRASS ROD 13 MM.DIA GDE.1 HB TO IS-319/1989 IS-319/1989

BRASS ROD 13 MM.DIA GDE.1 HB TO IS-319/1989 IS-319/1989

SPRING STEEL WIRE 2.03 MM (14SWG) IS-4454 PT 1 -1981- GR -3 IS-4454 PT 1 -1981- GR -3

SPRING STEEL WIRE 2.03 MM (14SWG) IS-4454 PT 1 -1981- GR -3 IS-4454 PT 1 -1981- GR -3

CARBON STEEL ROD 22MM[7/8"]DIA BS=970/EN=5.

CARBON STEEL ROD 22MM[7/8"]DIA BS=970/EN=5.

M.S. SHEET 1.5 MM THICK. IS;1570/C-10 IS;1570/C-10

M.S. SHEET 1.5 MM THICK. IS;1570/C-10 IS;1570/C-10

SHIELDED COAXIAL CABLE WITH ANNEALED COPPER WIRE SIZE 7/0.16 MM TYPE DELTON RG-174/U

SHIELDED COAXIAL CABLE WITH ANNEALED COPPER WIRE SIZE 7/0.16 MM TYPE DELTON RG-174/U

YOKE WELDING (L-70/168/RF2A-6) TO DRG. NO. 4023918

AS PER DRG.

DRG. NO. 4023918

BRASS TUBE 35MM (O/D) X 22 MM (I/D) TO-IS 407 CUZN 37 TA

BRASS TUBE 35MM (O/D) X 22 MM (I/D) TO-IS 407 CUZN 37 TA

ALLUMINIUM SHEET 2.00MM THICK AS PER IS: 737-2008, DESIGNATION-19000, CONDITION-HX4. NOTE: THE SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & BOTH SIDE LAMINATED WITH INTER LEAF PACKING TO AVOID CORROSION.

ALLUMINIUM SHEET 2.00MM THICK AS PER IS: 737-2008, DESIGNATION-19000, CONDITION-HX4. NOTE: THE SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & BOTH SIDE LAMINATED WITH INTER LEAF PACKING TO AVOID CORROSION.

ALLUM ALLOY SHEET 6 MM TH.X 1220 X 2440. MM OR 1/4''X 4' X 8'TO SPECN.IS-737/1986 OF DESIGN.24345 IN WP CONDITION WITH INTER-LEAF PACKING TO AVOID SCRATCH ES IN TRANSITION

ALLUM ALLOY SHEET 6 MM TH.X 1220 X 2440. MM OR 1/4''X 4' X 8'TO SPECN.IS-737/1986 OF DESIGN.24345 IN WP CONDITION WITH INTER-LEAF PACKING TO AVOID SCRATCH ES IN TRANSITION

BRASS ROD 22MM(7/8") DIA. GDE1, HB(HALF HARD) TO IS:319-2007

BRASS ROD 22MM(7/8") DIA. GDE1, HB(HALF HARD) TO IS:319-2007

BRASS ROD 8.00 MM DIA TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 8.00 MM DIA TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

ALUMINIUM ALLOY ROD 22.00MM (7/8")DIA TO SPECIFICATION IS-733/1983-24345 (TOLERANCE +0.25MM)

ALUMINIUM ALLOY ROD 22.00MM (7/8")DIA TO SPECIFICATION IS-733/1983-24345 (TOLERANCE +0.25MM)

ALL.ALLOY ROD 1-3/8"DIA IS: 733-1983 64430-WP

ALL.ALLOY ROD 1-3/8"DIA IS: 733-1983 64430-WP

ALU.ALLOY INGOT IS-617/1975 A-11 WP

ALU.ALLOY INGOT IS-617/1975 A-11 WP

CARBON STEEL FLAT 10 MM THICK X 40 MM WIDE AS PER IS:5517 -1993, 40C8

CARBON STEEL FLAT 10 MM THICK X 40 MM WIDE AS PER IS:5517 -1993, 40C8

CARBON STEEL ROD 8.00 MM DIA SPEC. IS:5517-1993, DESIGNATION- 40C8

CARBON STEEL ROD 8.00 MM DIA SPEC. IS:5517-1993, DESIGNATION- 40C8

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

MILD STEEL WIRE 12 SWG DIA. IS- 280/ BS-1052

M. S. ROD 8 MM(5/16)DIA.BS-970/EN-3B.

M. S. ROD 8 MM(5/16)DIA.BS-970/EN-3B.

ALUMINIUM SHEET OF 1.6 MM THICK TO IS-737-1974/ SIC-H (SIZE 8'X 4' IS PREFERED). NOTE-SHEET SHOULD BE PERFECTLY FLAT & FREE FROM SCRATCH.WITH INTERLEAF PACKING TO AVOIDE SCRATCHES IN TRANSIT.

ALUMINIUM SHEET OF 1.6 MM THICK TO IS-737-1974/ SIC-H (SIZE 8'X 4' IS PREFERED). NOTE-SHEET SHOULD BE PERFECTLY FLAT & FREE FROM SCRATCH.WITH INTERLEAF PACKING TO AVOIDE SCRATCHES IN TRANSIT.

ALLUMINIUM ALLOY SHEET 8.00 MM THICK TO SPECN. IS-737/SIC HALF HARD. 24345 WP

ALLUMINIUM ALLOY SHEET 8.00 MM THICK TO SPECN. IS-737/SIC HALF HARD. 24345 WP

M.S.SHEET 1250X2500 X 2.00 MM THICK. FE410 IS:1079-1988 IS:1079-1988

M.S.SHEET 1250X2500 X 2.00 MM THICK. FE410 IS:1079-1988 IS:1079-1988

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

ALLUMINIUM ALLOY ROD 1/2"OR 12.7 MM DIA TO SPECIFICATION IS-733HE-15

ALLUMINIUM ALLOY ROD 1/2"OR 12.7 MM DIA TO SPECIFICATION IS-733HE-15

NAILS WIRE 2"X12G IS-730

NAILS WIRE 2"X12G IS-730

ALUMINIUM SHEET 1.5MM THICK GD-53000 HE-30 OF IS:737

ALUMINIUM SHEET 1.5MM THICK GD-53000 HE-30 OF IS:737

CR.NI.ST. ROD 8.00 MM DIA AS PER IS-6603 04 CR 18 NI 10

CR.NI.ST. ROD 8.00 MM DIA AS PER IS-6603 04 CR 18 NI 10

ALLUMINIUM SHEET 0.56MM TO SPECN IS-737/1986-19000. X 1250MM (4FT WIDE)

ALLUMINIUM SHEET 0.56MM TO SPECN IS-737/1986-19000. X 1250MM (4FT WIDE)

ALLUMINIUM ALLOY ROD 20 MM DIA TO SPECN. IS-733/1983 OF DESIGN.24345 IN WP CONDITION

ALLUMINIUM ALLOY ROD 20 MM DIA TO SPECN. IS-733/1983 OF DESIGN.24345 IN WP CONDITION

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1/2"DIA AS PER SPECN-IS-6693

EBONITE ROD 1"DIA IS-6693.

EBONITE ROD 1"DIA IS-6693.

LEADED BRASS INGOTS IS: 292-1983 L C B2 (IRON CONTENT 0.05%M

LEADED BRASS INGOTS IS: 292-1983 L C B2 (IRON CONTENT 0.05%M

NON MAGNETIC GUN METAL INGOT TO SPCN. IS-306,FE CONTENT SHOULD NOT BE MORE THAN 0.01%. IS-306 IS-306-1983

NON MAGNETIC GUN METAL INGOT TO SPCN. IS-306,FE CONTENT SHOULD NOT BE MORE THAN 0.01%. IS-306 IS-306-1983

H.T.BRASS ROD 9.50 MM DIA.IS-320 GD-HT-2

H.T.BRASS ROD 9.50 MM DIA.IS-320 GD-HT-2

P.BRONZE ROD 35 MM DIA. IS:7811-1985

P.BRONZE ROD 35 MM DIA. IS:7811-1985

H.T. BRASS ROD 41 MM DIA TO SPECIFICATION IS:320-1980, GRADE- HT 2, CONDITION-M.

H.T. BRASS ROD 41 MM DIA TO SPECIFICATION IS:320-1980, GRADE- HT 2, CONDITION-M.

MANGANESE BRONZE INGOTS TO SPECIFICATION BS/STA-7/CM-5 OR HTB-1 IS:304/1981

MANGANESE BRONZE INGOTS TO SPECIFICATION BS/STA-7/CM-5 OR HTB-1 IS:304/1981

LEADED TIN BRONZ INGOTS IS: 318-1981 L T B 3

LEADED TIN BRONZ INGOTS IS: 318-1981 L T B 3

GUN METAL ROD 22.22 MM DIA. G1 GP-3 OF BS:1400-1973 OR GUN METAL CONDITION M OF IS:8362-1973

GUN METAL ROD 22.22 MM DIA. G1 GP-3 OF BS:1400-1973 OR GUN METAL CONDITION M OF IS:8362-1973

N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%

N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%

BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 45 MM DIA. GRADE-2, HB TO IS:319-2007

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

G.M.BAR 1/2"SQR.BS-1400/G1-C

G.M.BAR 1/2"SQR.BS-1400/G1-C

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

Electric Pneumatic value EK 48 with Plug SHPLM 2 TY EK 48 CQA ICV QAI 029

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

GUN METAL ROD 50MM DIA TO IS-306/1983 IN CONTINOUS CAST CONDITION

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON MAG GUN METAL ROD 25 MM DIA.TO IS- 306/1983( IN CONTINOUS CAST CONDITION)

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

NON-MAGNETIC GUN METAL ROD 19 MM DIA. AS PER IS-306.1983

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

LEADED TIN BRONZE ROD 61 MM DIA TO SPEC:IS 318-1981 , GDE-LTB4

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

TIN BRONZE TO IS:306-1983 ROD 57MM DIA

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

BRASS SHEET 5.00 MM THICK IS-410-1977 CU ZN 30 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

NON MAGNETIC NI - SILVER STRIP 18% SIZE 16SWG X 1" WIDE TO SPECN IS-2283-1981 NS-10 HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB

PHOSPHOR BRONZE SHEET 18SWG(1.25MM) THICK X 305 X1219 MM AS PER SPEC. IS-7814-1985 GRADE II HB