THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK)

THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK)

AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5)

AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5)

AS PER DRG & SPECIFICATION

AS PER DRG & SPECIFICATION

PACKING BOX TO DRG. NO. CO-226

PACKING BOX TO DRG. NO. CO-226

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING BOX CO 325

AS PER DRG.

PACKING BOX FOR 125 MM HEAT STABILIZERS UNIT (CO-335 A)

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TRANSIT CAP TO GSF SK NO OTF/S/033 IN FINISH CONDITION

AS PER DRAWING

VARNISH M L-92 GOST 15865-70

VARNISH M L-92 GOST 15865-70

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168

AS PER IS:168

TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL

TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING WASHER (DET-74) TO SK. NO. OTF/S/008 IN F/C

AS PER DRAWING

STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT

STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT

CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT

• AS PER ATTACHMENT

• AS PER ATTACHMENT

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

PLASTIC BOX TO DRG. NO: CO-426/B

PLASTIC BOX TO DRG. NO: CO-426/B

PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A

AS PER DRAWING

CO-419/A

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

TRANSIT PLUG AS PER SK.NO. M-7949 DT 29.09.95

AS PER DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TRANSIT PLUG TO SK NO M-8990 IN F/C

TRANSIT PLUG TO SK NO M-8990 IN F/C

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

WOODEN PACKING BOX TO DRG. NO. CO-428

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DEEP SAXE BLUE TO BS 381 C 1980 TINT 113

DEEP SAXE BLUE TO BS 381 C 1980 TINT 113

STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.

STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.

PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C

PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C

DUMMY PELLET IN F/C TO DRG.NO.M-10395 DT. 27.08.2005

AS PER DRG. NO. M-10395

AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH

AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH

WOODEN PACKING BOX WITH PLASTIC LINER DRG. NO CO-517

AS PER DRAWING

CO-517

FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG.NO F-495E

AS PER DRG

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981

PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981

PAINT RM WHITE SEMI GLOSSY IS138-81

PAINT RM WHITE SEMI GLOSSY IS138-81

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

BLANK FOR DISTANCE TUBE TO OFAJ DRG. NO. CC-533-C

AS PER DRG.

Plastic Liner to GSF SK NO. M-6810/1

Plastic Liner to GSF SK NO. M-6810/1

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING BOX CO-262/3A IN FC

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CAP DET. NO. 4 IN F/C (TO SK. NO. OTF/SE/008)DRG. NO. 3-022859

CAP DET. NO. 4 IN F/C (TO SK. NO. OTF/SE/008)DRG. NO. 3-022859

MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)

MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)

SCREW TO DET NO 6(TO SK. NO. OTF/SE/007) IN F/C DRG. NO. 3-022859

SCREW TO DET NO 6(TO SK. NO. OTF/SE/007) IN F/C DRG. NO. 3-022859

SPRING TO DET NO. 5 SK NO OTF/SE/006 IN F/C

SPRING TO DET NO. 5 SK NO OTF/SE/006 IN F/C

STEEL ROD 13 MM +/- 0.1 MM DIA TO SPCN BS 970 PT 1 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2.5 TO 2.7 MTR

STEEL ROD 13 MM +/- 0.1 MM DIA TO SPCN BS 970 PT 1 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2.5 TO 2.7 MTR

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CAP,ET.1-6 OF DRG. NO.3-024044 TO SK NO. OTF PG 002 IN FC.

AS PER DRG.

SLEEVE TO DET.1-8B TO SK. NO. OTF/PG/006 IN F/C

AS PER DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

NUT IN F/C TO SK. NO. OTF/PG/003 DET. (1-5)

AS PER DRG

CONTAINER AS PER DRG. NO. M-9120B

CONTAINER AS PER DRG. NO. M-9120B

CONTAINER AS PER DRG. NO. M-9121B

AS PER DRG

STEEL ROD 7 MM DIA TO SPECN , BS : 970 PT : 1 GRADE: 080 M

STEEL ROD 7 MM DIA TO SPECN , BS : 970 PT : 1 GRADE: 080 M

BUSH TO DET 2-20 TO SK. NO. OTF/DD/013 IN F/C.

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PLATE TO DET 2-8 TO SK. NO. OTF/DD/016 IN F/C

AS PER DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL BALL V 3.175 TY-37.006.080-77 TO SK NO OTF/DD/031 IN F/C

AS PER DRG.

CAP DET NO. 21 TO SK. NO. OTF/DD/001 IN F/C

AS PER DRG.

SPRING,DET (2-15) TO SK. NO. OTF/DD/015 IN F/C

AS PER DRG.

MACHINING & PROCESSING OF STOPPER TO DRG. No. OTF/DD

MACHINING & PROCESSING OF STOPPER TO DRG. No. OTF/DD

STOPPER DET. 2-6, DRG. NO. 3-024045 (OTF/DD/004) IN F/C

STOPPER DET. 2-6, DRG. NO. 3-024045 (OTF/DD/004) IN F/C

PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93

PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93

OTF/PG/016

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C

BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C

• as per attachment

• as per attachment

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-485

AS PER DRAWING

CO-485

• AS PER ATTACHMENT

• AS PER ATTACHMENT

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-484 A

AS PER DRAWING

CO-484

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DRG.NO. 3-24045 det 2-12 FOR FUZE B-15

DRG.NO. 3-24045 det 2-12 FOR FUZE B-15

SPRING LOCKING PIN TO PT NO IQX 1004 F/C

SPRING LOCKING PIN TO PT NO IQX 1004 F/C

DIE CASTING SAFETY CAP.DRG.NO.C-2252A.

DIE CASTING SAFETY CAP.DRG.NO.C-2252A.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AL.ALLOY ROD 42 MM DIA TO SPECN IS 733;1983 GR 24345 IN “WP” CONDITION

AL.ALLOY ROD 42 MM DIA TO SPECN IS 733;1983 GR 24345 IN “WP” CONDITION

STEEL BALL 6.35MM DIA.FD-1244 DC.NO:37162-A

STEEL BALL 6.35MM DIA.FD-1244 DC.NO:37162-A

SEPTUM IN F/C DRG.NO.FD-1238,PT.NO.QX-361.

SEPTUM IN F/C DRG.NO.FD-1238,PT.NO.QX-361.

BRASS ROD 6 MM +-0.02MM DIA. TO SPECN.BS.-2874-86 -CZ-121,PB3 IN ‘M’ CONDITION

BRASS ROD 6 MM +-0.02MM DIA. TO SPECN.BS.-2874-86 -CZ-121,PB3 IN ‘M’ CONDITION

BRASS ROD 1-1/4”(31.75MM) DIA SPECN.BS.-2874-1986-CZ-121,PB3 IN ‘M’ CONDITION

BRASS ROD 1-1/4”(31.75MM) DIA SPECN.BS.-2874-1986-CZ-121,PB3 IN ‘M’ CONDITION

MACHINING AND PROCESSING OF BRASS EXTRUDED SHUTER TO DRG NO F676/1 TO PRODUCE SHUTTER PART NO IQX7.

MACHINING AND PROCESSING OF BRASS EXTRUDED SHUTER TO DRG NO F676/1 TO PRODUCE SHUTTER PART NO IQX7.

SCREW (CHEESE HEAD) M2X5 LONG TO SPECN IS -1366-1982(2ND REV) STEEL

SCREW (CHEESE HEAD) M2X5 LONG TO SPECN IS -1366-1982(2ND REV) STEEL

PIN HINGE IN F/C FD 1252 DRG QX 1248 DC 36103-A

PIN HINGE IN F/C FD 1252 DRG QX 1248 DC 36103-A