UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995.
DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG.
ALUMINIUM STEARATE SPECN : IND/ME/970:2016 DCNO.5462-ME DT.01-06-2016 (A) RETENTION ON 150 MICRO METRE IS SIEVE MAX : 5.0% (B) RETENTION ON 75 MICRO METRE IS SIEVE MAX : 15%
METALLIC CONTAINERS FOR CHARGES 8 & 9 OF 155 MM AMMN SPECIFICATION CQA(AMMN) KIRKEE. DRG.NO.4085561 DC-35637-A DT.17.12.93 LEAK TEST AS PER SPECN.IA 1169 (N) DC 35707-A DT 05.05.94
DECOPPERING AGENT FOR 155 MM CHARGE 8 & 9 ( DS CAT NO:9535 - 000864 ) TO SPECN:IND/ME-971:2016), DC 5463-ME DATED 01.06.2016 & BOFORS DRG. NO:6 388 122 SIZE: 500 MM + OR - 5 MM X 100 MM + OR - 5 MM X 0.08 MM + 0.01 MM ( 0.08 TO 0.09 MM ) MASS 40 GRAMS + OR - 1 GRAM.
CLOTH COTTON DOWN TIGHT AS PER SPECN:IND/ME 1005 october 2012,DC 5105 ME DT.27-04-2013 COLOUR SIGNAL RED, AS PER COLOUR SHADE NO.537 OF IS:5-2007(SIXTH REVISION) (WIDTH: 1400 MM)
ACRYLIC RAYON CLOTH TO SPECN:IND/ME 973(A):2016 GRADE "B" DC 6009-ME DATED 03-02-17 (1.15-METER WIDTH FOR THE MANUFACTURE OF 155 MM AMMN. CHARGE 8 AND 9 PROPELLANT BAGS)
BLEACHED COTTON LINTERS SPECN : JSS 8305-14:2015 (REVISION NO.4) DC 6048-ME DT.08.06.2017 THE DYNAMIC VISCOSITY OF EACH SAMPLED BALE FROM A LOT SHALL BE WITHIN 20 TO 30 POISES. LOT SIZE IS PROX. 6.0 TO 7.0 TONNE
OLEUM TECH.GR.I WITH 20% FREE SO3 (MIN) TO SPECN:IS:1089 OF 1986 (2nd REVISION) REAFFIRMED 2015.TO CONFIRM WITH ADDL.REQT FOR EXPLOSIVES INDUSTRY-Cl.3.3
FOIL TIN LEAD SPECN : JSS 9535-06:2010 (REV.NO.2) REAFFIRMED 2016 DC NO.6002-ME DT.24-09-2016 FOR THICKNESS 0.05MM SIZE OF THE STRIP-WIDTH-120MM, THICKNESS-0.05MM ANDLENGTH ADJUSTED TO 60 GRAM.
UNVARNISHED HOLLOW PAPER TUBE SIZE 800 MM LONG X 28 MM PLUS OR MINUS 1MM INTERNAL DIA,BOTH ENDS OPEN SPECN:CF 12.5 DT.17.1.95 WITH CORRECTION SLIP 12.5.1&12.5.2 CFA SKETCH NO.765 DATED. 2.12.88.
CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION),RAF-2017 FOR OLIVE GREEN SPECIFICATION IS:5088-1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017(VARIETY NO.2)
CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (Rev 6th,RAF 2017) FOR SIGNAL RED SPECN : IS:5088-1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION)RAF-2017 TO SPEN:IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR SIGNAL RED. SPECN:IS:5088 OF 1982(FIRST REVISION)WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG.
Specification
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG. PARTICULARS GIVEN BELOW. DRAWING:IA 1031 DC 36234-A DT: 04-02-1997 AND SPECN: IA948 ( A,F ) DC 36081-A READ WITH AIDE MEMOIRE - W/4.
BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH
CALICO BAG (20 KG CAPACITY) TO CFA SKETCH NO:932. DT.19.9.2001 WITH AMENDMENT NO.2 FOR BAG SPECN.IS-5088-1982 (FIRST REV)WITH AMENDMENT NO.2 OCT 1996 REAFD. 2017- FOR CLOTH
SPIRIT RECTIFIED TO SPECN IS:323-2009 (II REVISION REAFFIRMED 2014 DC NO.5009-ME DT.07.01.2011 DENATURED WITH 0.5% OF ACETONE TO SPECN. IS: 4117/ 2008 (SECOND REVISION) REAFFIRMED 2014
CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
Specification
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
Specification
ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
Specification
ASSEMBLY OF CSK FITTED BOLT M10 X 35MM CAT-1105 TO DRG NO. IMPD0993, WASHER DIA 11.5 TO DRG. NO.IMPD0994, HEX NUT M-10 TO DRG. NO. IMPD0995 AND LOCK NUT M10 FOR SR. NO. 1 TO DRG. IMPD 0996.
