COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANNEXURE "A" SCOPE OF WORK

COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANNEXURE "A" SCOPE OF WORK

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

7441122986 PCB PART NO. 590094 REV 4.0 PCB PART NO. 590094 REV 4.0, L AYER- 2L, SIZE IN MM- 119.60 X 70 MM THICKNESS- 1.60 MM, TOL +/-10%, GRADE- MIL PRF 55110 H AMD 3, S. FINISH- HASL, FIN ISH CU- IL NA MIC OL 105 MIC, IMPENDANCE- NO, MATERIAL- FR4 , TG 170

7441122986 PCB PART NO. 590094 REV 4.0 PCB PART NO. 590094 REV 4.0, L AYER- 2L, SIZE IN MM- 119.60 X 70 MM THICKNESS- 1.60 MM, TOL +/-10%, GRADE- MIL PRF 55110 H AMD 3, S. FINISH- HASL, FIN ISH CU- IL NA MIC OL 105 MIC, IMPENDANCE- NO, MATERIAL- FR4 , TG 170

7441122986 PCB PART NO. 590094 REV 4.0 PCB PART NO. 590094 REV 4.0, L AYER- 2L, SIZE IN MM- 119.60 X 70 MM THICKNESS- 1.60 MM, TOL +/-10%, GR

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441122985 PCB 599152 REV 4.0 PCB PART NO. 599152 REV 4.0, L AYER- 4L, SIZE IN MM- 120X200 THICKNESS- 1.60 MM, TOL +/-10 %, GRADE- MIL PRF 55110 H AMD 3, S. FINISH- HASL, FINISH CU- IL 70 MIC OL 70 MIC, IMPENDAN CE- NO, MATERIAL- FR4, TG 170

7441122985 PCB 599152 REV 4.0 PCB PART NO. 599152 REV 4.0, L AYER- 4L, SIZE IN MM- 120X200 THICKNESS- 1.60 MM, TOL +/-10 %, GRADE- MIL PRF 55110 H AMD 3, S. FINISH- HASL, FINISH CU- IL 70 MIC OL 70 MIC, IMPENDAN CE- NO, MATERIAL- FR4, TG 170

7441122985 PCB 599152 REV 4.0 PCB PART NO. 599152 REV 4.0, L AYER- 4L, SIZE IN MM- 120X200 THICKNESS- 1.60 MM, TOL +/-10 %, GRADE- MIL P

• ELECTROMNIC ITEM

• ELECTROMNIC ITEM

7441122984 SET OF PCB 04 TYPES SET OF PCB, PART NO. 599153 RE V3.0, 599154 V3.0, 599155 REV3 .0 & 599156 V3.0 (04 TYPES) LA YERS- 4L, SIZE IN MM -169.20X1 08.22 MM, THICKNESS-1.60MM TOL +/-10%, GRADE- MILPRF55110 H A MD 3, S FINISH-HASL, FINISH CU -IL 70 MIC OL 70 MIC, IMPENDAN CE- NO, MATERIAL- FR4, TG 170

7441122984 SET OF PCB 04 TYPES SET OF PCB, PART NO. 599153 RE V3.0, 599154 V3.0, 599155 REV3 .0 & 599156 V3.0 (04 TYPES) LA YERS- 4L, SIZE IN MM -169.20X1 08.22 MM, THICKNESS-1.60MM TOL +/-10%, GRADE- MILPRF55110 H A MD 3, S FINISH-HASL, FINISH CU -IL 70 MIC OL 70 MIC, IMPENDAN CE- NO, MATERIAL- FR4, TG 170

7441122984 SET OF PCB 04 TYPES SET OF PCB, PART NO. 599153 RE V3.0, 599154 V3.0, 599155 REV3 .0 & 599156 V3.0 (04 TYPES) LA YERS- 4L, S

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123289 CABLE VIDEO IN CABLE VIDEO IN AS PART NO. 204 89009400

7441123289 CABLE VIDEO IN CABLE VIDEO IN AS PART NO. 204 89009400

7441123289 CABLE VIDEO IN CABLE VIDEO IN AS PART NO. 204 89009400

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123288 CABLE VIDEO OUT CABLE VIDEO OUT AS PART NO. 20 489009300

7441123288 CABLE VIDEO OUT CABLE VIDEO OUT AS PART NO. 20 489009300

7441123288 CABLE VIDEO OUT CABLE VIDEO OUT AS PART NO. 20 489009300

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123470 MODEL 732-5597-ND CMC MODEL 732-5597-ND CMC 12MH 10A 2LN TH

7441123470 MODEL 732-5597-ND CMC MODEL 732-5597-ND CMC 12MH 10A 2LN TH

7441123470 MODEL 732-5597-ND CMC MODEL 732-5597-ND CMC 12MH 10A 2LN TH

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123469 AC/DC POWER MODULE MODEL NO. T UNS700F28-PR3

7441123469 AC/DC POWER MODULE MODEL NO. T UNS700F28-PR3

7441123469 AC/DC POWER MODULE MODEL NO. T UNS700F28-PR3

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123468 MODEL NO. 817-1300-ND POWER LI NE FILTER 30A

7441123468 MODEL NO. 817-1300-ND POWER LI NE FILTER 30A

7441123468 MODEL NO. 817-1300-ND POWER LI NE FILTER 30A

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123119 SRCG/SCP/POTENTIOMETER 500K 0. 5W 10% ALTE PART NO. 38688900M

7441123119 SRCG/SCP/POTENTIOMETER 500K 0. 5W 10% ALTE PART NO. 38688900M

7441123119 SRCG/SCP/POTENTIOMETER 500K 0. 5W 10% ALTE PART NO. 38688900M

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123118 SRCG/SCP/LED RED/GREEN INDICAT T1 3/4 AS PER MANUFACTURER PART NO.3338B1RGVWO MAKE-SLOA N PRECISION OPTOELECTRONICS

7441123118 SRCG/SCP/LED RED/GREEN INDICAT T1 3/4 AS PER MANUFACTURER PART NO.3338B1RGVWO MAKE-SLOA N PRECISION OPTOELECTRONICS

7441123118 SRCG/SCP/LED RED/GREEN INDICAT T1 3/4 AS PER MANUFACTURER PART NO.3338B1RGVWO MAKE-SLOA N PRECISION OPTOELECTRONICS

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123117 SRCG/SCP/COM OMAP SODIUM, AS P ER MANUFACTURER PART NO.29499- VAR-SOM-OM3730 MAKE-VARISCITE

7441123117 SRCG/SCP/COM OMAP SODIUM, AS P ER MANUFACTURER PART NO.29499- VAR-SOM-OM3730 MAKE-VARISCITE

7441123117 SRCG/SCP/COM OMAP SODIUM, AS P ER MANUFACTURER PART NO.29499- VAR-SOM-OM3730 MAKE-VARISCITE

• ELECTRONIC ITEM

• ELECTRONIC ITEM

INDUCTION HARDENING OF SECTOR (675-54-190)

INDUCTION HARDENING OF SECTOR (675-54-190)

• As per tender document part A

• As per tender document part A

INDUCTION HARDENING OF SHIELD TO DRG. NO. 675-51-CD162CB/ 1005-560438.[FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL,TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENED SHIELD,PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

INDUCTION HARDENING OF SHIELD TO DRG. NO. 675-51-CD162CB/ 1005-560438.[FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL,TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENED SHIELD,PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

• As per tender document Part A

• As per tender document Part A

BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.

BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.

• WILL BE UPLOADED

• WILL BE UPLOADED

TUBE ASSY METAL TO DRG. NO. 4710-040701

TUBE ASSY METAL TO DRG. NO. 4710-040701

• As per drawing

• AS per QAP

Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish

Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish

Drg. No. SK-3145-10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish

• Machining

• Chemical & Mechanical properties as per std. Given drawing.
• Dimensional Inspection ,for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

BRACKET

188.31.183/C

188.31.183/C

• INVESTMENT CASTING

• AS PER QAP

GEAR RATCHET

172.64.024-1A/C

172.64.024-1A/C

• INVESTMENT CASTING

• AS PER QAP

STATOR 05 COCKING VIEW A S PER DRG 079215 A 01 FOR COCKING MECH ASSY OF SRCG

STATOR 05 COCKING VIEW A S PER DRG 079215 A 01 FOR COCKING MECH ASSY OF SRCG

• STATOR 05 COCKING VIEW A S PER DRG 079215 A 01 FOR COCKING MECH ASSY OF SRCG

• STATOR 05 COCKING VIEW A S PER DRG 079215 A 01 FOR COCKING MECH ASSY OF SRCG

7440200838 PLATE ASSY Drg No.AL6.731.111 PLATE ASSY TO DRG.NO.AL6.731. 111,FOR POWER UNIT OF 1G46

7440200838 PLATE ASSY Drg No.AL6.731.111 PLATE ASSY TO DRG.NO.AL6.731. 111,FOR POWER UNIT OF 1G46

7440200838 PLATE ASSY Drg No.AL6.731.111 PLATE ASSY TO DRG.NO.AL6.731. 111,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200821 PULSE COUNTER Drg No.IUMK 468.153.001 PULSE COUNTER TO DRG.NO IUMK 468.153.001 FOR POWER UNIT OF 1G46

7440200821 PULSE COUNTER Drg No.IUMK 468.153.001 PULSE COUNTER TO DRG.NO IUMK 468.153.001 FOR POWER UNIT OF 1G46

7440200821 PULSE COUNTER Drg No.IUMK 468.153.001 PULSE COUNTER TO DRG.NO IUMK 468.153.001 FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200820 STABILIZER Drg No.AL5.123.051 STABILIZER TO DRG.NO.AL5.123. 051,FOR POWER UNIT OF1G46

7440200820 STABILIZER Drg No.AL5.123.051 STABILIZER TO DRG.NO.AL5.123. 051,FOR POWER UNIT OF1G46

7440200820 STABILIZER Drg No.AL5.123.051 STABILIZER TO DRG.NO.AL5.123. 051,FOR POWER UNIT OF1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200819 REGULATING UNIT Drg No.AL5.122.014 REGULATING UNIT TO DRG.NO.AL5. 122.014,FOR POWER UNIT OF 1G46

7440200819 REGULATING UNIT Drg No.AL5.122.014 REGULATING UNIT TO DRG.NO.AL5. 122.014,FOR POWER UNIT OF 1G46

7440200819 REGULATING UNIT Drg No.AL5.122.014 REGULATING UNIT TO DRG.NO.AL5. 122.014,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200817 CONVERTER Drg No.AL5121082 CONVERTER TO DRG.NO.AL5121082 ,FOR POWER UNIT OF 1G46

7440200817 CONVERTER Drg No.AL5121082 CONVERTER TO DRG.NO.AL5121082 ,FOR POWER UNIT OF 1G46

7440200817 CONVERTER Drg No.AL5121082 CONVERTER TO DRG.NO.AL5121082 ,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200814 COMPENSATING NETWORK Drg No.AL5072002 COMPENSATING NETWORK TO DRG.NO .AL5072002 FOR POWER UNIT OF 1G46.

7440200814 COMPENSATING NETWORK Drg No.AL5072002 COMPENSATING NETWORK TO DRG.NO .AL5072002 FOR POWER UNIT OF 1G46.

7440200814 COMPENSATING NETWORK Drg No.AL5072002 COMPENSATING NETWORK TO DRG.NO .AL5072002 FOR POWER UNIT OF 1G46.

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440200813 AMPLIFIER Drg No.IUMK.468724.001 AMLIFIER TO DRG.NO.IUMK.468724 .001 FOR POWER UNIT OF 1G46

7440200813 AMPLIFIER Drg No.IUMK.468724.001 AMLIFIER TO DRG.NO.IUMK.468724 .001 FOR POWER UNIT OF 1G46

7440200813 AMPLIFIER Drg No.IUMK.468724.001 AMLIFIER TO DRG.NO.IUMK.468724 .001 FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121189 TRANSFORMER TPP 272-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 272-40-400 AS PER SPECN. NO. OUO.471.000 TU

7441121189 TRANSFORMER TPP 272-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 272-40-400 AS PER SPECN. NO. OUO.471.000 TU

7441121189 TRANSFORMER TPP 272-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 272-40-400 AS PER SPECN. NO. OUO.471.000 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9927099545 TRANSFORMER TPP-219-40-400 Drg No.SPCNNO:OUO471000TU TRANSFORMER TPP-219-40-400 SPECN. NO OUO 471.000 TY

9927099545 TRANSFORMER TPP-219-40-400 Drg No.SPCNNO:OUO471000TU TRANSFORMER TPP-219-40-400 SPECN. NO OUO 471.000 TY

9927099545 TRANSFORMER TPP-219-40-400 Drg No.SPCNNO:OUO471000TU TRANSFORMER TPP-219-40-400 SPECN. NO OUO 471.000 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9001120091 TRANSFORMER Drg No.BL4720054-01 TRANSFORMER TO DRG NO:BL4.720 .054-01

9001120091 TRANSFORMER Drg No.BL4720054-01 TRANSFORMER TO DRG NO:BL4.720 .054-01

9001120091 TRANSFORMER Drg No.BL4720054-01 TRANSFORMER TO DRG NO:BL4.720 .054-01

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121519 CON CIRS THD RP MALE 2RMG CON CIRS THD RP MALE 2RMG 24/1 9/1 REAR T (HARNESS CONNECTOR) AS PER OEM PART NO.2RMG24B19S H1E2 MAKE-AMPHENOL INTERCONNECT IND IA PVT.LTD.

7441121519 CON CIRS THD RP MALE 2RMG CON CIRS THD RP MALE 2RMG 24/1 9/1 REAR T (HARNESS CONNECTOR) AS PER OEM PART NO.2RMG24B19S H1E2 MAKE-AMPHENOL INTERCONNECT IND IA PVT.LTD.

7441121519 CON CIRS THD RP MALE 2RMG CON CIRS THD RP MALE 2RMG 24/1 9/1 REAR T (HARNESS CONNECTOR) AS PER OEM PART NO.2RMG24B19S H1E2

• ELECTRONIC ITEM

• ELECTRONIC ITEM

FISCHER CONNECTORS MAKE DEE 10 3 A015-700 PANEL MOUNT RECEPTA CLE WITH FEMALE SOLDER BUCKET PINS

FISCHER CONNECTORS MAKE DEE 10 3 A015-700 PANEL MOUNT RECEPTA CLE WITH FEMALE SOLDER BUCKET PINS

• ELECTRONIC COMPONENT

• ELECTRONIC COMPONENT

7441121517 CON 30PIN, SOLDER CUP, PLUG CON 30PIN, SOLDER CUP, PLUG WI TH EARS (HARNESS CONNECTOR) AS PER OEM PART NO.WTB30PRCJ MAKE-AIRBORN INC, USA

7441121517 CON 30PIN, SOLDER CUP, PLUG CON 30PIN, SOLDER CUP, PLUG WI TH EARS (HARNESS CONNECTOR) AS PER OEM PART NO.WTB30PRCJ MAKE-AIRBORN INC, USA

7441121517 CON 30PIN, SOLDER CUP, PLUG CON 30PIN, SOLDER CUP, PLUG WI TH EARS (HARNESS CONNECTOR) AS PER OEM PART NO.WTB30PRCJ MAKE-AIRBORN IN

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121539 SWITCH TOGGLE SP ON NONE ON SWITCH TOGGLE SP ON NONE ON (H ARNESS COMPONENT) AS PER OEM PART NO. 5636ABX40 8 MAKE- APEM COMPONENTS INC, USA

7441121539 SWITCH TOGGLE SP ON NONE ON SWITCH TOGGLE SP ON NONE ON (H ARNESS COMPONENT) AS PER OEM PART NO. 5636ABX40 8 MAKE- APEM COMPONENTS INC, USA

7441121539 SWITCH TOGGLE SP ON NONE ON SWITCH TOGGLE SP ON NONE ON (H ARNESS COMPONENT) AS PER OEM PART NO. 5636ABX40 8 MAKE- APEM COMPONENTS IN

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121534 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER OEM PART NO.222S28M16 MAKE-NICOMATIC FR

7441121534 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER OEM PART NO.222S28M16 MAKE-NICOMATIC FR

7441121534 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER OEM PART NO.222S28M16 MAKE-NICOMATIC FR

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121545 CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR) AS PER OEM PART NO.221Y06F22 MAKE-NICOMATIC FR

7441121545 CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR) AS PER OEM PART NO.221Y06F22 MAKE-NICOMATIC FR

7441121545 CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR) AS PER OEM PART NO.221Y06F22 MAKE-NICOMATIC FR

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9927090604 CONNECTOR(PLUG), RSG4TV Drg No.ABO364047TY CONNECTOR(PLUG), RSG4TV AS PER SPECN. NO. AVO.364.047 TU

9927090604 CONNECTOR(PLUG), RSG4TV Drg No.ABO364047TY CONNECTOR(PLUG), RSG4TV AS PER SPECN. NO. AVO.364.047 TU

9927090604 CONNECTOR(PLUG), RSG4TV Drg No.ABO364047TY CONNECTOR(PLUG), RSG4TV AS PER SPECN. NO. AVO.364.047 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9001120190 DIODE 2D102A1/BB Drg No.SPECNNO:AEYAR.432120.444TY DIODE 2D102A1/BB AS PER SPECN. NO.AEYAR 432120.444TY

9001120190 DIODE 2D102A1/BB Drg No.SPECNNO:AEYAR.432120.444TY DIODE 2D102A1/BB AS PER SPECN. NO.AEYAR 432120.444TY

9001120190 DIODE 2D102A1/BB Drg No.SPECNNO:AEYAR.432120.444TY DIODE 2D102A1/BB AS PER SPECN. NO.AEYAR 432120.444TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

DIODE 2D212A/SO Drg No.SPECNNO:AEYAR432120.177 TY DIODE 2D212A/SO AS PER SPECN N O AEYAR 432120.177 TY

DIODE 2D212A/SO Drg No.SPECNNO:AEYAR432120.177 TY DIODE 2D212A/SO AS PER SPECN N O AEYAR 432120.177 TY

DIODE 2D212A/SO Drg No.SPECNNO:AEYAR432120.177 TY DIODE 2D212A/SO AS PER SPECN N O AEYAR 432120.177 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441121567 SEALING BOOT FOR APEM 5000 SW SEALING BOOT FOR APEM 5000 SW (HARNESS COMPONENT) AS PER OEM PART NO.U1231 MAKE-APEM COMPONENTS INC, USA

7441121567 SEALING BOOT FOR APEM 5000 SW SEALING BOOT FOR APEM 5000 SW (HARNESS COMPONENT) AS PER OEM PART NO.U1231 MAKE-APEM COMPONENTS INC, USA

7441121567 SEALING BOOT FOR APEM 5000 SW SEALING BOOT FOR APEM 5000 SW (HARNESS COMPONENT) AS PER OEM PART NO.U1231 MAKE-APEM COMPONENTS INC,

• electronic item

• electronic item

LF 9927081747 BEARING BALL 12X24X6

LF 9927081747 BEARING BALL 12X24X6

SINGLE ROW BALL BEARING 12X24X6MM

• BEARING

• BEARING

LF 2051250006 BEARING 5 1000084

BEARING

TU 4479-73

• BEARING

• BEARING

LF 2051100101 SINGLE ROW BEARING 10X26X8MM

BEARING

10X26X8MM

• RAW MATERIAL

• RAW MATERIAL

PLASTIC CONTAINER FOR 120MM FSAPDS MARK II AS PER DRG.NO: H OMA 120 2 130 1

AS PER DRAWING

• As per enclosed MI and drawing

• As per enclosed MI and drawing

WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.

WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALUMINIUM STRIP 15 X 0.025MM THICK TO SPECN.IS:737 STC 'O'.

ALUMINIUM STRIP 15 X 0.025MM THICK TO SPECN.IS:737 STC 'O'.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALUMINIUM STRIP 30 +/- 0.5 MM WIDE X 0.5 +/- 0.02 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION : SS-EN-485-2 EN AW 1050A-0 . EACH COIL WEIGHT UPTO 5 KG.

ALUMINIUM STRIP 30 +/- 0.5 MM WIDE X 0.5 +/- 0.02 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION : SS-EN-485-2 EN AW 1050A-0 . EACH COIL WEIGHT UPTO 5 KG.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALU. STRIP 20 +/- 0.5 MM WIDE X 0.05 +/- 0.001 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2, AW-1200-H19. EACH COIL WEIGHT UPTO 5KG.

ALU. STRIP 20 +/- 0.5 MM WIDE X 0.05 +/- 0.001 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2, AW-1200-H19. EACH COIL WEIGHT UPTO 5KG.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALU. STRIP 20 +/-0.5 MM WIDE X 0.5 +/- 0.01 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2 EN AW1050A (AL 99.5) H24(2). EACH COIL WEIGHT UPTO 5 KG.

ALU. STRIP 20 +/-0.5 MM WIDE X 0.5 +/- 0.01 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2 EN AW1050A (AL 99.5) H24(2). EACH COIL WEIGHT UPTO 5 KG.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALU STRIP 32 +/- 0.5MM WIDE X 0.15 +0.02 MM THICK IN FORM OF COIL OF CONTINUOUS LENGTH TO SPEC. NO EN AW-1200 OR EQUAL.EACH COIL WEIGHT UPTO 5KG.

ALU STRIP 32 +/- 0.5MM WIDE X 0.15 +0.02 MM THICK IN FORM OF COIL OF CONTINUOUS LENGTH TO SPEC. NO EN AW-1200 OR EQUAL.EACH COIL WEIGHT UPTO 5KG.

• WILL BE UPLOADED

• WILL BE UP LOADED

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A

• WILL BE UPLOADED

• WILL BE UPLOADED

SOLDER ELECTRONIC GRADE WIRE 16/18/20 SWG 60/40 (TIN/LEAD) LOW MELTING MINIMUM RESISTANCE TO DRY SOLDER , AS PER SPECIFICATION IS-193-2000 (FIFTH REVISION)

SOLDER ELECTRONIC GRADE WIRE 16/18/20 SWG 60/40 (TIN/LEAD) LOW MELTING MINIMUM RESISTANCE TO DRY SOLDER , AS PER SPECIFICATION IS-193-2000 (FIFTH REVISION)

• WILL BE UPLOADED

• WILL BE UPLOADED

WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.

WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/HS) COND.) WITH MAX.UTS-390 MPa IN COIL WEIGHT OF EACH50 TO 100 KG.

STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/HS) COND.) WITH MAX.UTS-390 MPa IN COIL WEIGHT OF EACH50 TO 100 KG.

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG

STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG

• WILL BE UPLOADED

• WILL BE UPLOADED

INDUSTRIAL X RAY FILM 300MMX400MM NDT65/D- 7

INDUSTRIAL X RAY FILM 300MMX400MM NDT65/D- 7

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL STRIP 15X1.0MM IS-2062 FE-410

STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2006 (SIXTH REVISION)GRADE 'A' DESIGNATION Fe-410-WA.STRIPS SHOULD BE PACKED WITHHASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG

STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2011 (SEVENTH REVISION) GRADE 'A' DESIGNATION E-250(Fe-410-WA).STRIPS SHOULD BE PACKED WITH HASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.

STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2011 (SEVENTH REVISION) GRADE 'A' DESIGNATION E-250(Fe-410-WA).STRIPS SHOULD BE PACKED WITH HASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.

• WILL BE UPLOADED

• WILL BE UPLOADED

ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN

ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN

• WILL BE UPLOADED

• WILL BE UPLOADED

LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018)

LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018)

• WILL BE UPLOADED

• WILL BE UPLOADED

COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300MM MIN.& MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE. MATERIAL WOULD BE ACCEPETED BASED ON LAB TESTAND MACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.

COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300MM MIN.& MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE. MATERIAL WOULD BE ACCEPETED BASED ON LAB TESTAND MACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.

• WILL BE UPLOADED

• WILL BE UPLOADED

STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)(1st Rev) SURFACE COND.OF MATERIAL SHOULDBE AS PER IS:9550-2001 (REAFFIRMED 2015) (1st REVESION).

STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)(1st Rev) SURFACE COND.OF MATERIAL SHOULDBE AS PER IS:9550-2001 (REAFFIRMED 2015) (1st REVESION).

• WILL BE UPLOADED

• WILL BE UPLOADED

BALLISTIC CAP TO OFAJ DRG NO FS 2771C

BALLISTIC CAP TO OFAJ DRG NO FS 2771C

• AS PER DRG ATTACHMENT

• AS PER DRG ATTACHMENT

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMINAL DIMENTION ALL OVER (REFRENCE:CLAUSE 4.2 OF IS:733-1983).

ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMINAL DIMENTION ALL OVER (REFRENCE:CLAUSE 4.2 OF IS:733-1983).

ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMI

• as per attached file

• as per attached file

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.

BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN

• as per file attached

• as per file attached

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

STEEL STRIP 15 +/-0.05 MM WIDE X 0.6 (+0.00 /-0.05) MM THICK DESIGNATION DC 03 (1.0347) SYMBOL C 590

WORK HARDENED OF SPECIFICATION BS EN 10139:2016

• AS PER ATTACHED LIST

• AS PER ATTACHED LIST

STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.

STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.

• as per attached file

• as per attached file

BRASS STRIP 102X3.66MM BS2871 CZ126

BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).

• as per file attached

• as per file attached

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).

STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLO

• as per file attached

• as per file attached

STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.

STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.

AS PER ITEM DESCRIPTION.

• 1. Electric Arc Furnace/other suitable furnace 2. Degassing unit 3. Refining Furnace 4. Continuous casting m/c 5. De-Scaler m/c. 6. Rolling mill 7. Carbon oxygen manipulator

• 8. Relevant inspection & testing facility

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER

STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE

• file attached

• file attached

ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).

ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).

ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016

• TO BE UPLODED

• TO BE UPLODED

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD

• as per file attached

• as per file attached

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.

• as per file attached

• as per file attached

ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN

ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN

• as per file attached

• as per file attached