9081002749 EJECTOR PROJECTILE (MODIFIED) DRG. NO. GCF/50/39423

9081002749 EJECTOR PROJECTILE (MODIFIED) DRG. NO. GCF/50/39423

• As per Tender Document QAP.

• As per Tender Document QAP.

CAM PLATE ( STAGE OPERATION ROUGH TURNING HEAT TREATMENT THEN FINISH INSIDE AND OUTSIDE GRINDING) TO DRG NO M 11456

CAM PLATE ( STAGE OPERATION ROUGH TURNING HEAT TREATMENT THEN FINISH INSIDE AND OUTSIDE GRINDING) TO DRG NO M 11456

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STATOR 05 COCKING AS PER DRG 079215A 01 FOR COCKING MECH ASSY OF SRCG and ROTOR 05 COCKING AS PER DRG 079215A 02 FOR ROTOR ASSY OF SRCG

STATOR 05 COCKING AS PER DRG 079215A 01 FOR COCKING MECH ASSY OF SRCG and ROTOR 05 COCKING AS PER DRG 079215A 02 FOR ROTOR ASSY OF SRCG as per drg

• As per pecification qap

• as per teasting

STRIP FOR RGB-60 AS PER DRAWING NO. NASK 1134/1/8/3

AS PER ENCLOSED DRAWING AND QAP

NASK 1134/1/8/3

• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP

• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP
• AS PER ENCLOSED DRAWING AND QAP

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

• Machining & fabrication

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.

PACKING FITMENTS CONSISTING OF ONE NO.EACH OF THE FOLLOWING:1.BOTTOM TO DRG. PT. NO: ISV-1976 DC-36073-A DT 31/01/96.2.TOP TO DRG. PT. NO. : ISV-1975 DC-36073-A DT 31/01/96.

PACKING FITMENTS CONSISTING OF ONE NO.EACH OF THE FOLLOWING:1.BOTTOM TO DRG. PT. NO: ISV-1976 DC-36073-A DT 31/01/96.2.TOP TO DRG. PT. NO. : ISV-1975 DC-36073-A DT 31/01/96.

• 1-Extruder for Expended Polystyrene 2-Roll Milling For Sheet Preparation. 3- Compression Moulding facility. 4- Shearing facility. 5- Other relevant inspection & testing facility

• 1-Extruder for Expended Polystyrene 2-Roll Milling For Sheet Preparation. 3- Compression Moulding facility. 4- Shearing facility. 5- Other relevant inspection & testing facility

WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B

WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B

• WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B

• WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B

Detector Card Mechanical Assembly

Detector Card Mechanical Assembly

• Detector Card Mechanical Assembly

• as per specification

10KMLRF WITH 3 3 V PS BOARD ASSY

10KMLRF WITH 3 3 V PS BOARD ASSY

• AS PER SPECIFICATION

• AS PER SPECIFICATION

HARNESS LASER ASSY

HARNESS LASER ASSY

• AS PER SPECIFICATION

• AS PER SPECIFICATION

TNS NAVY DETECTOR

TNS NAVY DETECTOR

• AS PER SPECIFICATION

• AS PER SPECIFICATION

CAMERA SUB ASSY

CAMERA SUB ASSY

• AS PER SPECIFICATION

• AS PER SPECIFICATION

7441123557 RT22C2L103 TRIMMER POTENTIOMETER 10 KOHM +/-5% -1W-25 TURN,+/- 50 PPM /0C AS PER PART NO. RT22C2L103

7441123557 RT22C2L103 TRIMMER POTENTIOMETER 10 KOHM +/-5% -1W-25 TURN,+/- 50 PPM /0C AS PER PART NO. RT22C2L103

7441123557 RT22C2L103 TRIMMER POTENTIOMETER 10 KOHM +/-5% -1W-25 TURN,+/- 50 PPM /0C AS PER PART NO. RT22C2L103

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123556 RT22C2L502 TRIMMER POTENTIOMETER 5 KOHM, +/-5%, 1W, 25 TURN, +/- 50PPM /OC AS PER PART NO. RT22C2L502

7441123556 RT22C2L502 TRIMMER POTENTIOMETER 5 KOHM, +/-5%, 1W, 25 TURN, +/- 50PPM /OC AS PER PART NO. RT22C2L502

7441123556 RT22C2L502 TRIMMER POTENTIOMETER 5 KOHM, +/-5%, 1W, 25 TURN, +/- 50PPM /OC AS PER PART NO. RT22C2L502

• ELECTRONIC ITEM

• ELECTRONIC ITEM

DSS TOP ASSY DRG NO.MB578Y-01 for SRCG TOP ASSY

DSS TOP ASSY DRG NO.MB578Y-01 for SRCG TOP ASSY

• AS PER DRG

• AS PER QAP

STEEL BILLET FOR SHELL 155 MM L15A1 FORGINGS AS PER DRG NO. F-677

STEEL BILLET FOR SHELL 155 MM L15A1 FORGINGS AS PER DRG NO. F-677

F 677

• NIL

• NIL

9001120867 POTENTIOMETER 100K, KNOB POTEN TIOMETER/VISHAY MAKE P16-PA16, TOLERANCE 10%, 1WAT T

9001120867 POTENTIOMETER 100K, KNOB POTEN TIOMETER/VISHAY MAKE P16-PA16, TOLERANCE 10%, 1WAT T

9001120867 POTENTIOMETER 100K, KNOB POTEN TIOMETER/VISHAY MAKE P16-PA16, TOLERANCE 10%, 1WAT T

• 9001120867 POTENTIOMETER 100K, KNOB POTEN TIOMETER/VISHAY MAKE P16-PA16, TOLERANCE 10%, 1WAT T
• ELECTRONIC ITEM

• ELECTRONIC ITEM

ELECTRIC TRIGGER ASSEMBLY TO DRG NO. 2A42 .06.000Cb & SPECIFICATION 2A42 .06.000TY (C6000)

ELECTRIC TRIGGER ASSEMBLY TO DRG NO. 2A42 .06.000Cb & SPECIFICATION 2A42 .06.000TY (C6000)

C6000

• AS PE TE
• AS PER TE

• AS PER TE

HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA

HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA

TO DRG.NO.0204-03-04-02-14-007-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing
• Dimensional inspection for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun

Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun

6008784 of M2HB Gun

• CNC turning & Slotting facility

• NABL Testing & Self Certification

Rod Assembly, Driving Spring, OOW50BMG as per Drawing No. 5564305 of M2HB Gun

Rod Assembly, Driving Spring, OOW50BMG as per Drawing No. 5564305 of M2HB Gun

5564305 of M2HB Gun

• Turning & Spring manufacturing facility

• NABL & Self Inspection certificates

Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun

Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun

7313106 of M2HB Gun

• CNC turning machines & Heat treatment facilities

• NABL Test certificate & Firm Test Certificate

OBTURATING CONE TO DRG NO FS 3226

OBTURATING CONE TO DRG NO FS 3226

FS 3226

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

9081001309 SPRING TO ART NO 4083328

9081001309 SPRING TO ART NO 4083328

• AS PER DRG

• AS PER QAP

9081001304 SPRING TO ART NO 6361016

9081001304 SPRING TO ART NO 6361016

• AS PER DRG

• AS PER QAP

9081001297 SPRING TO ART NO 6361026

9081001297 SPRING TO ART NO 6361026

• AS PER DRG

• AS PER QAP

9081001290 SPRING TO ART NO 6361037

9081001290 SPRING TO ART NO 6361037

• AS PER DRG

• AS PER QAP

9069111532 SPRING TO DRG.NO.M2/BOF-6107114

9069111532 SPRING TO DRG.NO.M2/BOF-6107114

• AS per Drg

• As per QAP

9069112448 SPRING TO DRG.NO.BOF-6115658

9069112448 SPRING TO DRG.NO.BOF-6115658

• AS PER DRG

• AS PER QAP

9069086516 SPRING 6112189

9069086516 SPRING 6112189

• AS PER DRG

• AS PER QAP

9080081406 SPRING HELICAL EXTSN.TO 5360-000268

9080081406 SPRING HELICAL EXTSN.TO 5360-000268

• AS per Drg

• As per QAP

HOSE CONNECTION TO DRG NO. CQA(HV)5.32.030

HOSE CONNECTION TO DRG NO. CQA(HV)5.32.030

CQA(HV)5.32.030

• ATTACHED

• ATTACHED

Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN

Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN

5504082

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have CNC turning, machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• Testing and inspection facilities. The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN

BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN

7266821

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have CNC turning, machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN

COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN

6528309

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have CNC turning, machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN

SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN

11010439

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have CNC turning, machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN

BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN

6528322

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have Deep hole Drilling machine, CNC machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN

SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN

6535477-S

• Manufacturing facilities including machines, capacity, trained manpower etc for the subject item. The firm should have CNC turning, machining, heat treatment, surface treatment and grinding facilities to meet the manufacturing requirements as applicable.

• The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable.

PORTABLE NITROGEN PURGING KIT

PORTABLE NITROGEN PURGING KIT

DRW NO. CWC-252/45

• AS PER DRAWINGS

• AS PER DRAWING

9069112496 HOUSING TO DRG.NO.BOF-3012784

9069112496 HOUSING TO DRG.NO.BOF-3012784

• as per drg

• As per qap

9080081505 TOOLS ARTILLARY 6A.DS.4933-000309

9080081505 TOOLS ARTILLARY 6A.DS.4933-000309

• AS PER DRG

• AS PER QAP

INSTALLATION OF DRIVERS INSTRUMENT PANEL ASSY TO DRG NO. 172.70.007CB-19CB

INSTALLATION OF DRIVERS INSTRUMENT PANEL ASSY TO DRG NO. 172.70.007CB-19CB

172.70.007CB-19CB

• ATTACHED

• ATTACHED

0725577121 PB HOLLOW BAR 135MM O/D X 95MM I/D IS:28-1985 GRADE 2 CONTINUOUS CAST

0725577121 PB HOLLOW BAR 135MM O/D X 95MM I/D IS:28-1985 GRADE 2 CONTINUOUS CAST

• As per specification

• As per specification

COVER TO DRG NO FS 3229

COVER TO DRG NO FS 3229

FS 3229

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALPURPOSE OLIVE GREEN TO ISC-220 OF IS-5-2007(6TH REV)REAFFIRMED 2017 PAINT TO SPECN.IS 168-1993(THIRD REV.)(REAFFIRMED 2012) DC NO.3685-ME DATED 19-03-01.

AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALPURPOSE OLIVE GREEN TO ISC-220 OF IS-5-2007(6TH REV)REAFFIRMED 2017 PAINT TO SPECN.IS 168-1993(THIRD REV.)(REAFFIRMED 2012) DC NO.3685-ME DATED 19-03-01.

• WILL BE UPLOADED LATER ON

• WILL BE UPLOADED LATER ON

LIGHT FILTER, AS PER DRG. NO. Y-7190369

LIGHT FILTER, AS PER DRG. NO. Y-7190369

• AS PER DRAWING

• AS PER DRAWING

OPTICAL GLASS DF-620362 GLASS SIZE [(355-390) X (238-250) X 36-45) MM]

OPTICAL GLASS DF-620362 GLASS SIZE [(355-390) X (238-250) X 36-45) MM]

NA

• AS PER SPECIFICATION

• AS PER SPECIFICATION

7441120968 RELAY RNE 22,24V Drg No.TU16-523.583-80 RELAY RNE 22,24V AS PER SPECN. NO. TU16-523.58 3-80

7441120968 RELAY RNE 22,24V Drg No.TU16-523.583-80 RELAY RNE 22,24V AS PER SPECN. NO. TU16-523.58 3-80

7441120968 RELAY RNE 22,24V Drg No.TU16-523.583-80 RELAY RNE 22,24V AS PER SPECN. NO. TU16-523.58 3-80

• ELECTRONICE ITEM

• ELECTRONICE ITEM

FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MACHINE ARE REQUIRED ESSENTIALLY.) SPECIFICATION :- AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT NO. 3 AND AS PER SAMPLE HELD WITH OCFS.

FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MACHINE ARE REQUIRED ESSENTIALLY.) SPECIFICATION :- AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT NO. 3 AND AS PER SAMPLE HELD WITH OCFS.

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL

SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL

K 1032 STAR 3 1031 STAR 2 K 1033 STAR

• AS PER DRG K 1032 STAR 3 1031 STAR 2 K 1033 STAR

• AS PER DRG K 1032 STAR 3 1031 STAR 2 K 1033 STAR

PLUNGER TO DRG.NO.TRD-1-1-3147 'a'

PLUNGER TO DRG.NO.TRD-1-1-3147 'a'

• will be uploaded later on

• will be uploaded later on

THREE BARREL EXTERNAL FUEL SYSTEM BLT T 72 TO DRG NO. PV572.0705.0024

THREE BARREL EXTERNAL FUEL SYSTEM BLT T 72 TO DRG NO. PV572.0705.0024

PV572.0705.0024

• ATTACHED

• ATTACHED

TUNGSTEN POWDER

CQA(M)58-2017

• AS PER SPECIFICATION OF CQA(M)-58-2017

• AS PER SPECIFICATION OF CQA(M)-58-2017

STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

• MELTING & ROLLING

• AS PER SPECIFICATION

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204-03-04-11-19-005-00DA

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204-03-04-11-19-005-00DA

DRG.NO.0204-03-04-11-19-005-00DA

• As per attachment

• As per attachment

STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25

STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25

STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25

• Melting & rolling

• As per specification

Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB.

Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB.

Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB.

• Melting & rolling

• As per specification

9069112737 SOCKET PLUG TO PART.NO.IAN 283 SA

9069112737 SOCKET PLUG TO PART.NO.IAN 283 SA

• as per drg

• as per QAP

9069112701 PLUG BLANKING SINGLE PT.IAN-281 SA

9069112701 PLUG BLANKING SINGLE PT.IAN-281 SA

• As per Drg

• As per QAP

LINK BELT FOR CARTRIDGE 12.7 MM TO DRG NO. 6L19CBCB

LINK BELT FOR CARTRIDGE 12.7 MM TO DRG NO. 6L19CBCB

• ATTACHED

• ATTACHED

Phosphor Bronze as per dia 80mm

Phosphor Bronze as per dia 80mm

• As per attached file

• As per attached file

Phosphor Bronze as per dia 130mm

Phosphor Bronze as per dia 130mm

NA

• As per attached file

• As per attached file

PIPE LINE ASSY TO DRG NO. CQA(HV)5.66.010

PIPE LINE ASSY TO DRG NO. CQA(HV)5.66.010

CQA(HV)5.66.010

• ATTACHED

• ATTACHED

KHLAGON MANUAL FIRE EXTINGUISHER ASSEMBLY DRAWING TO DRG NO. 172.82.091CBCB

KHLAGON MANUAL FIRE EXTINGUISHER ASSEMBLY DRAWING TO DRG NO. 172.82.091CBCB

172.82.091CBCB

• ATTACHED

• ATTACHED

BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84 IN FINISHED CONDITION

BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84 IN FINISHED CONDITION

DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84

• As per drawing

• As per drawing

P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102

P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102

• as per spec

• as per sep.

Fabrication of P3 HD Parachute System at Firm Premises

ADRDE/1266, 1267(a),1270(a), 1272, 1279, 1278(a), 1246, 1248, 1253, 1249,1260, 1257,1259, 1258, 1293, 1275, 1261, 1256, 1265, 1247, 1287(a), 1274(a), 1277, 1254, 1280, 1264, 1263, 1251, 1268, 1255, 1281, 1269, 1250, 1286 and other textile items.

• As per Specification/Drawing

• As per Specification/Drawing

OIL COOLER TO DRG NO. 175.32.002CB

OIL COOLER TO DRG NO. 175.32.002CB

175.32.002CB

• ATTACHED

• ATTACHED

DISK DRIVING ASSY TO DRG NO.175.41.007CB

DISK DRIVING ASSY TO DRG NO.175.41.007CB

175.41.007CB

• ATTACHED

• ATTACHED

FAN WITH BRACKET TO DRG NO. 172.71.022CB-4

FAN WITH BRACKET TO DRG NO. 172.71.022CB-4

172.71.022CB-4

• ATTACHED

• ATTACHED

CUP TO OFAJ DRG NO FS 2457A

CUP TO OFAJ DRG NO FS 2457A

• CUP TO OFAJ DRG NO FS 2457A

• CUP TO OFAJ DRG NO FS 2457A

BUSH TO DRG NO FS 3227

BUSH TO DRG NO FS 3227

FS 3227

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT
• AS PER ATTACHEMENT

Fabrication of Upper Crank to Drg No 9A 621 06 001 from Upper Crank Forging to Drg No F 2297

Fabrication of Upper Crank to Drg No 9A 621 06 001 from Upper Crank Forging to Drg No F 2297

• As per file attached

• As per file attached

Fabrication of Lower Crank to Drg No 9A 621 06 008 from Lower Crank Forging to Drg No F 2297

Fabrication of Lower Crank to Drg No 9A 621 06 008 from Lower Crank Forging to Drg No F 2297

• As per attachment

• As per attachment

100M DRUM CABLE AS PER RQI1702079 100 FOR CABLE DRG NO Y20105A 00 FOR SRCG

As per specification

• As per specification monitering instruction

• yes

As per specification

As per specification

• As per specification monitering instruction.

• yes

PLUNGER DETENT TO DRG NO 5340 015504

PLUNGER DETENT TO DRG NO 5340 015504

• As per Drg

• As per QAP

PLUNGER LOCKING-IFL 804 SA.TO DRG.NO.1015-000724.

PLUNGER LOCKING-IFL 804 SA.TO DRG.NO.1015-000724.

• As per Drg

• As per QAP

PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003

PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003

• As per Drg

• AS per QAP

CAP TO CQA (A) DRG. NO. BW8.635.541 DC NO 37327-A DT. 18-12-2012

CAP TO CQA (A) DRG. NO. BW8.635.541 DC NO 37327-A DT. 18-12-2012

• AS PER SPECIFICATION

• AS PER QMI