Rip Cord Assembly

ADRDE/1323(f)

• As per Specification/drawing

• As per Specification/drawing

Quick Release Connecting Lug (Male)

DRAWING NO.: ADRDE/797(e) SHEET NO. 8.

• As per Drawing/Specification

• As per Drawing/Specification

ALUMINIUM ALLOY ROD 75MM DIA , TO ASTM B 221M GRADE 7075-T6510, AS PER SPECIFICATION ENCLOSED.

ASTM B 221M GRADE 7075-T6510

• as per enclosed specification

• as per enclosed specification

RECOVERY OF TUNGSTEN POWDER FROM TUNGSTEN ALLOY SOLID SCRAP AND END PIECES AS PER SCOPE OF WORK ENCLOSED

as per enclosed MI

• as per enclosed MI

• as per enclosed MI

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

• AS PER DRG

• AS PER QAP

CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG

CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

set of O ring LRF

As per specification scope of work

• set of O ring LRF

• As per specification scope of work

GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.

GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.

• Guanidine Nitrate is manufactured by heating Dicyandiamide confirming to IND/ME/878(Prov) with two equitant of Ammonium Nitrate confirming to IND/ME/86 degree C at 160 degree C.

• Inspecti0on facility : Guanidine Nitrate and the packages in which it is packed shall be subject to inspection by and to the approval of the Quality Assurance Officer/Quality Assurance Authority
• Testing facility/requirements : Samples taken from any portion of batch/lot/consignment of material shall confirm to the following test requirements Sl no. Characteristics Passing standard 1. Physical form Crystalline 2. Bulk Density, g/ml Min. 0.70 Max. 0.90 3. Melting point, oC Min. 210 Max. 214 4 Water soluble at 30 oC, % by mass Min. 15.10 5. Guanidine Nitrate , % by mass Min. 99 6. Ammonium Nitrate, % by mass Max. 0.48 7. Urea Nil
• 8. Residue on ignition , % by mass Max. 0.02 9. Moisture content , % by mass Max. 0.48 10. Matter insoluble in water at 20 oC, % by mass Max . 0.50 11. Malamine, % by mass Max 0.10 12. pH of water extract Min. 5 Max. 6

Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route

Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route

0204 03 04 02 14 005 00DA MIM Route

• MIM Route

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

• MIM Route

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)

Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)

0204-03-04-02-14-014-00DA (MIM Route)

• MIM Route

• 1-Chemical and mechanical properties as per std. given drawing. 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

Webbing Nylon Tubular 14 mm Undyed (BS 1100 Kg)

ADRDE/Specn/1983/11(d).

• As per Specification/Drawing

• As per Specification/Drawing

9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480

9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480

• As per QAP & TE documents.

• As per QAP & TE documents

9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)

9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)

• As per QAP

• As per QAP & TE document

RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797

RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797

• As per Drg

• AS per QAP

overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)

overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)

• As per Drg

• As per QAP

NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264

NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264

• AS PER ATTACHED DOCUMENT

• AS PER ATTACHED DOCUMENT

Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.

Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.

DRG No.0204-03-04-02-14-010-00DA.

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

• As per attachment

• as per attachment

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

• As per attachment

• As per attachment

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG

CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG

CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG

• AS PER DRG

• AS PER QAP

FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE

FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE

• As per T.E

• As per T.E

PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670

PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670

• As per T.E

• As per T.E

PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672

PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672

TEND 2672

• AS PER T.E

• AS PER T.E

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

for collaboration co production of holographic sight with BDC reticle

for collaboration co production of holographic sight with BDC reticle

• as per specification

• as per specification

GEAR AS PER DRAWING NO AL6 373 039 LF7440208431

GEAR AS PER DRAWING NO AL6 373 039

DRAWING NO AL6.373.039

• Manufacturing Technology

• Testing / Inspection Facility

GEAR AS PER DRAWING NO.AL.6.373.038 LF7440208430

GEAR AS PER DRAWING NO.AL.6.373.038

DRAWING NO.AL.6.373.038

• Manufacturing Technology

• Testing / Inspection Facility

LEVER AS PER DRAWING NO AL6 354 344 LF 7440208429

LEVER AS PER DRAWING NO.AL.6.354.344

DRAWING NO.AL.6.354.344

• Manufacturing Technology

• Testing / Inspection Facility

ARRESTER HANDLE AS PER DRAWING NO AL6 354 342 LF7440208428

ARRESTER HANDLE AS PER DRAWING NO AL6 354 342

DRAWING NO AL6.354.342

• Manufacturing Technology

• Testing / Inspection Facility

DRIVE AS PER DRAWING NO AL6 337 172 LF7440208413

DRIVE AS PER DRAWING NO AL6 337 172

AL6 .337.172

• Manufacturing Technology

• Testing / Inspection Facility

CHANGE MAGNIFICATION MECHANISM NO AL6 063 266 LF7440208411

CHANGE MAGNIFICATION MECHANISM NO AL6 063 266

AL6.063.266

• Manufacturing Technology

• Testing / Inspection Facility

DISPLACEMENT MECHANISM DRAWING NO AL6 063 257 LF7440208418

DISPLACEMENT MECHANISM DRAWING NO AL6 063 257

AL6.063.257

• Manufacturing Technology

• Testing / Inspection Facility

ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051 LF7440208417

ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051

AL6.060.051

• Manufacturing Technology

• Testing / Inspection Facility

DRIVE AS PER DRAWING NO AL6 337 251 LF7440208422

DRIVE AS PER DRAWING NO AL6 337 251

AL6.337.251

• Manufacturing Technology

• Testing / Inspection Facility

DRIVE AS PER DRAWING NO AL6 337 166 LF7440208421

DRIVE AS PER DRAWING NO AL6 337 166

AL6.337.166

• Manufacturing Technology

• Testing / Inspection Facility

CARDAN SHAFT AS PER DRAWING NO AL6 308 131 LF7440208434

CARDAN SHAFT AS PER DRAWING NO AL6 308 131

AL6.308.131

• Manufacturing Technology

• Testing / Inspection Facility

CARRIAGE AS PER DRAWING NO AL6 200 149 LF7440208433

CARRIAGE AS PER DRAWING NO AL6 200 149

AL6.200.149

• Manufacturing Technology

• Testing / Inspection Facility

HOOD AS PER DRAWING NO AL6 437111 LF7440208438

HOOD AS PER DRAWING NO AL6 437111

AL6.437.111

• Manufacturing Technology

• Testing / Inspection Facility

ADJUSTING UNIT AS PER DRAWING NO AL6 060 034 LF7440208432

ADJUSTING UNIT AS PER DRAWING NO AL6 060 034

AL6.060.034

• Manufacturing Technology

• Testing / Inspection Facility

SHAFT AS PER DRAWING NO AL6 308 086 LF7440208420

SHAFT AS PER DRAWING NO AL6 308 086

AL6.308.086

• Manufacturing Technology

• Testing / Inspection Facility

SHAFT AS PER DRAWING NO AL6 308 084 LF7440208419

SHAFT AS PER DRAWING NO AL6 308 084

AL6.308.084

• Manufacturing Technology

• Testing / Inspection Facility

LIGHT FILTER AS PER DRAWING NO AL5 940 393 LF 7440208416

LIGHT FILTER AS PER DRAWING NO AL5 940 393

DRAWING NO.AL5 .940.393

• Manufacturing Technology

• Testing / Inspection Facility

OBJECTIVE AS PER DRAWING NO AL5 929 069 LF7440208412

OBJECTIVE AS PER DRAWING NO AL5 929 069

DRAWING NO AL5.929.069

• Manufacturing Technology

• Testing / Inspection Facility

HORIZONTAL ARRESTER DRAWING NO AL6 280 017 LF7440208425

HORIZONTAL ARRESTER DRAWING NO AL6 280 017

DRAWING NO AL6 280 017

• Manufacturing Technology

• Testing / Inspection Facility

VERTICAL ARRESTER AS PER DRAWING NO AL6 280 018 LF 7440208424

VERTICAL ARRESTER AS PER DRAWING NO AL6 280 018

DRAWING NO.AL6.280.018

• Manufacturing Technology

• Testing / Inspection Facility

DRIVE AS PER DRAWING NO AL6 337 271 LF7440208437

DRIVE AS PER DRAWING NO AL6 337 271

DRAWING NO AL6 337 271

• Manufacturing Technology

• Testing / Inspection Facility

REDUCTION GEAR AS PER DRAWING NO AL6 332 099 LF 7440208436

REDUCTION GEAR AS PER DRAWING NO AL6 332 099

DRAWING NO AL6 332 099

• Manufacturing Technology

• Testing / Inspection Facility

REDUCTION GEAR AS PER DRAWING NO AL6 332 095

REDUCTION GEAR AS PER DRAWING NO AL6.332.095

DRAWING NO AL6.332.095

• Manufacturing Technology

• Testing / Inspection Facility

UPPER MIRROR DRIVE AS PER DRAWING NO AL6 337 154 LF 7440208426

UPPER MIRROR DRIVE AS PER DRAWING NO AL.6.337.154

DRAWING NO AL.6.337.154

• Manufacturing Technology

• Testing / Inspection Facility

REDUCTION GEAR AS PER DRAWING NO AL6 332 080 LF 7440208426

REDUCTION GEAR AS PER DRAWING NO AL6 332 080

DRAWING NO.AL.6.332.080

• Manufacturing Technology

• Testing / Inspection Facility

ADJUSTING FLANGE AS PER DRAWING NO AL.6.063.319 LF 7440208423

ADJUSTING FLANGE AS PER DRAWING NO AL.6.063.319

DRAWING NO AL.6.063.319

• Manufacturing Technology [1]

• Testing / Inspection Facility [1]

BLOCK AS PER DRAWING NO AL6 672 431 LF 7440208410

BLOCK AS PER DRAWING NO AL6 672 431

DRAWING NO.AL.6.672. 431

• Manufacturing Technology [1]

• Testing / Inspection Facility [1]

ILLUMINATOR AS PER DRAWING NO AL5 142 320 LF 7440208409

ILLUMINATOR AS PER DRAWING NO AL5 142 320

AL.5.142.320

• Manufacturing Technology [1]

• Testing / Inspection Facility [1]

FLANGE AS PER DRAWING NO AL6 240091 LF7440208408

FLANGE AS PER DRAWING NO AL6 240091

DRAWING NO AL6 240091

• Manufacturing Technology [1]

• Testing / Inspection Facility [1]

DRIVE AS PER DRAWING NO AL6.337.305 (LF-7440208414)

DRIVE AS PER DRAWING NO AL6.337.305 (LF-7440208414)

AL6.337.305

• Manufacturing Technology

• Testing / Inspection Facility

SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296 i). Prism AP-90 Deg. DRG. No. Y-7160336 ii). Prism AP-90 Deg. DRG. No. Y-7170036

SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296 i). Prism AP-90 Deg. DRG. No. Y-7160336 ii). Prism AP-90 Deg. DRG. No. Y-7170036

DRG. NO. Y-4411296 { (i). Prism AP-90 Deg. DRG. No. Y-7160336 (ii). Prism AP-90 Deg. DRG. No. Y-7170036}

• AS PER DRAWINGS

• AS PER DRAWINGS

INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1

INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1

SK-JVPC-598*1

• INVESTMENT CASTING

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

PARACHUTE SYSTEM FOR 84 MM CARL GUSTAF ILLG AMMN GEN ASSY TO DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )

DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )

• AS PER DRAWING DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )

• AS PER DRAWING DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )

CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG

CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG

• AS PER DRG

• AS PER QAP

CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG

CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG

• AS PER DRG

• AS PE QAP

CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG

CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG

• AS PER DRG

• AS PER QAP

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

• AS PER DRG

• AS PER QAP

BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.

BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.

• AS PER DRG

• AS PER QAP

WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG

WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG

SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG

• AS PER DRG

• SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG

WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG

WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG

SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG

SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG

• AS PER DRG

• AS PER QAP

Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun

Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun

Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun

• As fulfilling the requirements for manufacturing of the component as per QAP & Drawing

• As fulfilling the requirements for inspection of the component as per QAP & Drawing

Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun

Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun

Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun

• As fulfilling the requirements for manufacturing of the component as per QAP & Drawing

• As fulfilling the requirements for inspection of the component as per QAP & Drawing