required for akash sustainer container

SIDE PAD TOP FOR AKASH SUSTAINER CONATINER AS PER DRG. NO. RPD/AK/CA/01 01 00 01 & DOC NO: DOP/S&SRPD/WP-01. ISSUE NO: 04, REV. NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

RPD/AK/CA/01 01 00 01

• hot pressing

• at ofbh premises: weighing and visual inspection

O.G. COVER AS PER DRG. ODC-OLF/HVF/MBS/023

O.G. COVER AS PER DRG. ODC-OLF/HVF/MBS/023

• AS PER OFD TENDER CONDITIONS

• AS PER OFD TENDER CONDITIONS

REQUIRED FOR AKASH SUSTAINER CONTAINER

SIDE PAD BOTTOM FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/01 01 00 02 & DOC NO. DOP/S&SRPD/WF-01 ISSUE NO: 04, REV. NO. 00 DT: 09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

RPD/AK/CA/01 01 00 02

• HOT PRESSING

• AT OFBH PREMISES: WEIGHING & VISUAL

required for akash sustainer container

TRANSPARENT GLASS FOR AKASH SUSTAINER CONATAINER AS PER DRG NO: RPD/AK/CA/01 02 01 08 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO: 04, REV.NO. 00 DT: 09/12/2011, DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

RPD/AK/CA/01 02 01 08

• plastic molding

• visual inspection at OFBH premises

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER ATTACHMENT

• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION

• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 8

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COPPER WIRE 0.7 MM (22SWG) DIA. BS-2873/C-101 ANNEALED

COPPER WIRE 0.7 MM (22SWG) DIA. BS-2873/C-101 ANNEALED

• AS PER ANNEXURE

• AS PER ANNEXURE

M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

M.S.ROD 10MM DIA AS PER IS:1570(PART-2)-1979, C-15 (15C4)

• as per annexure

• as per annexure
• as per annexure

GLUE FOR CONTAINER FOR 125 MM FSAPDS (MANGO PORJECT) ADDHESIVE RUBBER ROSIN SP (APC NO.6A) AS PER JSS 8040-12:2012 REAFFIRMED 2017 (3RD REVISION)

GLUE FOR CONTAINER FOR 125 MM FSAPDS (MANGO PORJECT) ADDHESIVE RUBBER ROSIN SP (APC NO.6A) AS PER JSS 8040-12:2012 REAFFIRMED 2017 (3RD REVISION)

• AS Per JSS 8040-12 :2012 (Third revision) Reaffirmed 2017

• Inspection Authority :- The GM or his authorised Rep. Testing Facility as per AS Per JSS 8040-12 :2012 (Third revision) Reaffirmed 2017

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

TEND :2509*4 (for K-1202*5)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION

PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION

TEND 2616 STAR 3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY

CYLINDER FOR METAL CASE AS PER DRAWING NO. OFBH/SK/1460. THE ACCEPTANCE CRITERIA MUST BE COMPLIED AS PER ATTACHED ANNEXURE 'A' . THE SUPPLIER MUST PROVIDE/SUBMIT THE TEST CERTIICATE OBTAINED FROM NABL/GOVT. ACCREDATED LAB WITH SUPPLY

OFBH/SK/1460

• ROLLING, PRESSING, SEAM WELDING ETC.

• AS PER ANNEXURE 'A: ATTACHED

REQUIRED FOR AKASH SUSTAINER CONTAINER

HYLUM DISC FOR AKASH SUSTAINER CONTAINER AS PER DRG NO RPD/AK/CA/00 00 00 02 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00 DT:09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TESAT CERTIFICATE.

• GRAIN MANUFACTURING, MACHINING

• VISUAL

REQUIRED FOR AKASH SUSTAINER CONTAINER

RUBBER BAG FOR AKASH SUSTAINER CINTAINER AS PER DRG NO RPD/AK/CA/01 03 00 01 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00. DT: 09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• RUBBER MANUFACTURING, CANVAS BELT TECH

• AS PER QAP
• RUBBER PROPERTIES E.G HARDNESS, UTS, COMPRESSION

REQUIRED FOR AKASH SUSTAINER CONTAINER

CAP FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/00 00 00 01 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03, SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• RUBBER MANUFACTURING

• AT OFBH PREMISES : SURFACE PITS, FLESH REMOVAL, FLOW DEFECTS

SHOE TO DRG. NO. 219.35.126

"SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEET ROR REFERENCE:- HOT FORGING,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.219.35.126.{CQA(HV)}. PROCESS SHEET FOR REFERENCE:-MACHINING SHOE 219.35.126.

DRAWING NO. 219.35.126.{CQA(HV)}

• Forging Heating furnace,Hot Forging press 2500 Ton/ Forging hammer-3 Ton cap.Min.Trimming press-250 Ton Min Normalizing furnace
• Vertical machining centre or horizontal machining centre Lathe/CNC turning centre

• Crack detection m/c ,Hardness testing m/c,Mech.,chemical,metallography test facilities

GUIDE TO DRG.NO. 172.55.013

["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING ,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.172.55.13.{CQA(HV)}. PROCESS SHEET FOR REFERENCE:-MCCHINING TRACK 172.55.013.

DRG. NO.172.55.013

• Forging Heating furnace,Hot Forging press 2500 Ton/ Forging hammer-3 Ton cap.Min.Trimming press-250 Ton Min Normalizing furnace
• Vertical machining centre or horizontal machining centre Lathe/CNC turning centre

• Crack detection m/c ,Hardness testing m/c,Mech.,chemical,metallography test facilities

GLASS TUBE 7.00 MM OUTSIDE DIA X 0.75 MM WALL THICKNESS (ANNEALED TRANSPARENT, FREE FROM STRIAE, FLAWS & OTHER DEFECTS) (GLASS MATERIAL AS PRESCRIBED IN IS:1632-1993)

GLASS TUBE 7.00 MM OUTSIDE DIA X 0.75 MM WALL THICKNESS (ANNEALED TRANSPARENT, FREE FROM STRIAE, FLAWS & OTHER DEFECTS) (GLASS MATERIAL AS PRESCRIBED IN IS:1632-1993)

• NA

• NA

CLAMP TO DRG.NO. 172.55.025 TRACK T-90

CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING,NORMALIZATION.FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.172.55.025.{CQA(HV)}.PROCESS SHEET FOR REFERENCE:-MACHINING CLAMP 172.55.025.

172.55.025/F (HVF) and 172.55.025.{CQA(HV)

• "Forging Heating furnace,Hot Forging press 2500 Ton/ Forging hammer-3 Ton cap.Min,Trimming press-250 Ton Min Normalizing furnace "
• Vertical machining centre or ,Horizontal machining centre

• Crack detection m/c ,Hardness testing m/c
• Mech.,chemical,metallography test facilities

TRACK LINK DRG.NO. 172.55.012

TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS FOR REFERENCE:-HOT FORGING,NORMALIZATION FOLLOWED BY MACHINING OF COMPONENT AS PER DRAWING N0.172.55.012{CQA(HV)} PROCESS SHEET FOR REFERENCE:-MACHINING TRACK LINK172.55.012.

172.55.012.{CQA(HV) and 172.55.012/F(HVF)

• Forging Heating furnace,Forging hammer- Minimum 5 Ton cap,Trimming press-650 Ton Min. Cap.,Normalizing furnace
• Vertical machining centre or ,Horizontal machining centre

• Crack detection machine,Hardness testing machine,Mech.,chemical,metallography test facilities
• Crack detection m/c,Hardness tester

PRISM TO DRG NO MCT 2551/3

PRISM TO DRG NO MCT 2551/3

• FINISHED PRISM AND POLISHED PLATES FOR DIFFERENT PERISCOPES

• FINISHED PRISM AND POLISHED PLATES FOR DIFFERENT PERISCOPES

PRISM TO DRG NO 2544/2

PRISM TO DRG NO 2544/2

• FINISHED PRISM AND POLISHED PLATES FOR DIFFERENT PERISCOPES

• FINISHED PRISM AND POLISHED PLATES FOR DIFFERENT PERISCOPES ASSOCIATED TESTING / INSPECTION

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

• MSME

• CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

TEND 2642

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DIBUTYL PHTHALATE AS PER ATTACHED SPECIFICATION NO. TU 32 E-2015

DIBUTYL PHTHALATE AS PER ATTACHED SPECIFICATION NO. TU 32 E-2015

• MSME

• DIBUTYL PHTHALATE AS PER ATTACHED SPECIFICATION NO. TU 32 E-2015

CHEMICALLY PRECIPITATED CHALK AS PER ATTACHED SPECIFICATION NO. TU 84-07509103.671-2014

CHEMICALLY PRECIPITATED CHALK AS PER ATTACHED SPECIFICATION NO. TU 84-07509103.671-2014

• MSME

• CHEMICALLY PRECIPITATED CHALK AS PER ATTACHED SPECIFICATION NO. TU 84-07509103.671-2014

(9911848187) SHELL ASSEMBLY TO DRG. NO. RPSD/AK/XCA/01 01 01 00; AS PER DOC NO. DOP/S&SRPD/WP—01; ISSUE NO ::04:; REV.. NO 00 DT: 09/12/2011; DOP/S&SRPD/F—03. SUPPLIER SHOULD SUBMIT THE TEST MATERIAL TEST CERTIFICATE.

(9911848187) SHELL ASSEMBLY TO DRG. NO. RPSD/AK/XCA/01 01 01 00; AS PER DOC NO. DOP/S&SRPD/WP—01; ISSUE NO ::04:; REV.. NO 00 DT: 09/12/2011; DOP/S&SRPD/F—03. SUPPLIER SHOULD SUBMIT THE TEST MATERIAL TEST CERTIFICATE.

RPSD/AK/XCA/01 01 01 00

• MILLING
• ROLLING
• TURNING
• WELDING
• GENERAL ENGINEERING

• AS PER QAP

ARMOUR STEEL 15 GRADE 54P SIZE 20X1400X5600 MM QTY 20000 KGS HARDNESS RANGE 200 270 BHN

GRADE 54 P HARDNESS RANGE 200 270 BHN

HVF/T-90/IMP/20MM/288

• AS PER VQC

• AS PER VQC

ARMOUR STEEL 15 GRADE 54 P SIZE 15X1150X6650 MM

GRADE 54P

HVF/T-90/IMP/15MM/289

• AS PER VQC

• AS PER VQC

ALUMINIUM ARMOUR PLATE CUT BLANK GRADE ABT 101, SIZE 23X530X600 MM TO DRG NO. 175.03.006-1A/FC QTY 6100 KGS

GRADE ABT 101

175.03.006-1A/FC

• AS PER VQC

• AS PER VQC

CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.

CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.

• CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.

• CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.

ARMOUR STEEL 15 GRADE 54P SIZE 20X1400X5600 MM QTY 20000 KGS HARDNESS RANGE 200 270 BHN

GRADE 54 P HARDNESS RANGE 200 270 BHN

HVF/T-90/IMP/20MM/288

• AS PER VQC

• AS PER VQC

ARMOUR STEEL 15 GRADE 54P SIZE 20X1400X5600 MM QTY 20000 KGS HARDNESS RANGE 200 270 BHN

GRADE 54 P HARDNESS RANGE 200 270 BHN

HVF/T-90/IMP/20MM/288

• AS PER VQC

• AS PER VQC

ARMOUR STEEL 15 GRADE 54 P SIZE 15X1150X6650 MM

GRADE 54P

HVF/T-90/IMP/15MM/289

• AS PER VQC

• AS PER VQC

ALUMINIUM ARMOUR PLATE CUT BLANK GRADE ABT 101 SIZE 23X180X280 MM

ABT 101

175 03 035 A FC

• AS PER VQC

• AS PER VQC

ALUMINIUM ARMOUR PLATE CUT BLANK GRADE ABT 101 SIZE 23X155X230 MM TO DRG NO 175 03 023 2A FC QTY 700 KGS

GRADE ABT 101

175 03 023 2A FC

• AS PER VQC

• AS PER VQC

ALUMINIUM ARMOUR PLATE CUT BLANK GRADE ABT 101 SIZE 23X220X420 MM DRG NO 175 03 009 1A FC QTY 1700 KGS

GRADE ABT 101

175 03 009 1A FC

• AS PER VQC

• AS PER VQC

HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO. 43

HOLOGRAPHIC SIGHT ASSEMBLY AS PER SPEC NO. 43

• ASSEMBLY AND TESTING & ASSOCIATED TESTING OR INSPECTION FACILITY

• AS PER OFD TENDER DOCUMENTS

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

TEND 2642

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

10 PIN CONNECTOR ( 222S10M16) with PINS

10 PIN CONNECTOR ( 222S10M16) with PINS

• 1) PCB DESIGNING 2) COMPONENT SELECTION 3) ASSOCIATED TESTING OR INSPECTION FACILITY

• AS PER OFD TENDER CONDITION

SMA CONNECTOR (MCX7-P-C-H-ST-CA3) WITH ASSEMBLY WITH 12 INCH LENGTH

SMA CONNECTOR (MCX7-P-C-H-ST-CA3) WITH ASSEMBLY WITH 12 INCH LENGTH

• 1) PCB DESIGNING 2) COMPONENT SELECTION 3) ASSOCIATED TESTING OR INSPECTION FACILITY

• AS PER OFD TENDER DOCUMENTS

SWITCH TOGGLE SINGLE POLE 2 AMP SPST 2A-250V.

SWITCH TOGGLE SINGLE POLE 2 AMP SPST 2A-250V.

• NA

• NA

STEEL WIRE 1.6 MM -0.06 DIA TO SPECIFICATION GOST 17305-91 GRADE 20 (OR) IS 1570 GRADE 10C4

STEEL WIRE 1.6 MM -0.06 DIA TO SPECIFICATION GOST 17305-91 GRADE 20 (OR) IS 1570 GRADE 10C4

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL BAR 1035 OR 1137 TO ASTM A108 OR IS:5517-1993 (REAFFIRMED 2004) DESIGNATION 35C8 TO ACHIEVE PHYSICAL PROPERTIES MINIMUM YP-73.000PSI,TS-90.000PSI,EL2 10% & RA 35% SIZE:11.5 +/-0.1MM DIA IN STRAIGHT LENGTH 2-3 METER

STEEL BAR 1035 OR 1137 TO ASTM A108 OR IS:5517-1993 (REAFFIRMED 2004) DESIGNATION 35C8 TO ACHIEVE PHYSICAL PROPERTIES MINIMUM YP-73.000PSI,TS-90.000PSI,EL2 10% & RA 35% SIZE:11.5 +/-0.1MM DIA IN STRAIGHT LENGTH 2-3 METER

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GROUND STEEL ROD DIA 10 =/-0.05MM TO SPECIFICATION GOST 7417-75/ 10 GOST 1051-73 OR IS1570, GRADE 10C4 IN STRAOGHT LENGTH OF 1.5MTR TO MTRS.

GROUND STEEL ROD DIA 10 =/-0.05MM TO SPECIFICATION GOST 7417-75/ 10 GOST 1051-73 OR IS1570, GRADE 10C4 IN STRAOGHT LENGTH OF 1.5MTR TO MTRS.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC

65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC

• AS PER ATTACHMENT

• AS PER ATTACHMENT

90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC

90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC

• AS PER ATTACHMENT

• AS PER ATTACHMENT

70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS

70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS

• AS PER ATTACHMENT

• AS PER ATTACHMENT

OPTICAL GLASS BSC 517642

OPTICAL GLASS BSC 517642

• NA

• NA

CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03

CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03

• CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03

• CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER DRG. NO. OFDR/CARTG 1"/03 AS PER DRAWING BY QCM

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN TRANSIT.

• as per annexure

• as per annexure

CHEEK REST OPTICAL INSTRUMENT DRG.NO. MCT-1403/5

CHEEK REST OPTICAL INSTRUMENT DRG.NO. MCT-1403/5

MCT-1403/5

• Sl. No. 61 & 63 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• Sl. No. 61 & 63 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL

SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL

K 2064 STAR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RING RETAINING (DISTANCE RING,OEM CODE Z0000001) DRG.NO. MCT-2944/1 FOR BINO 8X30 R

RING RETAINING (DISTANCE RING,OEM CODE Z0000001) DRG.NO. MCT-2944/1 FOR BINO 8X30 R

• INJECTION MOULDING

• INJECTION MOULDING ASSOCIATED TESTING

CELL OPTICAL ELEMENT AS PER DRG.NO.MCT-2955/1 ( K0000799 ) FOR HR BINO R

CELL OPTICAL ELEMENT AS PER DRG.NO.MCT-2955/1 ( K0000799 ) FOR HR BINO R

• INJECTION MOULDING

• INJECTION MOULDING ASSOCIATED TESTING

COVER PLATE,AS PER DRG.NO. MCT-2962/1 ( K0000070) FOR HR BINO 8X30R

COVER PLATE,AS PER DRG.NO. MCT-2962/1 ( K0000070) FOR HR BINO 8X30R

• INJECTION MOULDING

• INJECTION MOULDING ASSOCIATED TESTING

COVER PLATE,AS PER DRG.NO.MCT-2961/1 ( K0000069 ) FOR HR BINO 8X30R

COVER PLATE,AS PER DRG.NO.MCT-2961/1 ( K0000069 ) FOR HR BINO 8X30R

• INJECTION MOULDING

• INJECTION MOULDING ASSOCIATED TESTING

PRISM OPTICAL INSTRUMENT AS PER DRG.NO. MCT-2956/1 ( K0000005 ) FOR HR BINO 8X30 R

PRISM OPTICAL INSTRUMENT AS PER DRG.NO. MCT-2956/1 ( K0000005 ) FOR HR BINO 8X30 R

• INJECTION MOULDING

• INJECTION MOULDING ASSOCIATED TESTING

RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315

RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315

MCT-2313, 2314 & 2315

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290

HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290

MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2

MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2

MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

LAMP SOCKET ASSEMBLY 2.5V 0.3 AMP MCT-306/1 COMPRISING OF 307 & 308(3 SHTS)

LAMP SOCKET ASSEMBLY 2.5V 0.3 AMP MCT-306/1 COMPRISING OF 307 & 308(3 SHTS)

MCT-306/1 COMPRISING OF 307 & 308(3 SHTS)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

HOUSING OG DRG NO.IRDE-1625/1

HOUSING OG DRG NO.IRDE-1625/1

IRDE-1625/1

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7

ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7

CQA(I)-792/7

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

SCREW DRIVER NO.7 TO DRG NO.MCT-796/2

SCREW DRIVER NO.7 TO DRG NO.MCT-796/2

MCT-796/2

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)

ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)

IRDE-285/6, MCT-2612

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

• MSME

• INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

K 2061 STAR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS

FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS

FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS

• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS

• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS
• FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS

CASE MORTAR SIGHT TESTING APPARATUS, MK-I AS PER DRG.NO.:CIA (FC) 2434.

CASE MORTAR SIGHT TESTING APPARATUS, MK-I AS PER DRG.NO.:CIA (FC) 2434.

DRG.NO.:CIA (FC) 2434.

• As per Ordnance Factory Board Letter no.OFB/108/Online VR/QC dated-12/02/2019 with Annexure-A.

• As per Ordnance Factory Board Letter no.OFB/108/Online VR/QC dated-12/02/2019 with Annexure-A.

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1,MCT-1644/1,MCT-1646/1, MCT-1679/1, MCT-1680/1, MCT-2007,MCT-2008, MCT-2547/1 & MCT-2549/1.

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1,MCT-1644/1,MCT-1646/1, MCT-1679/1, MCT-1680/1, MCT-2007,MCT-2008, MCT-2547/1 & MCT-2549/1.

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1

• NOT MENTIONED IN ANNEXURE

• NOT MENTIONED IN ANNEXURE

CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1

CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1

CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1

• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1

• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1
• CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1

CASE ARTILLERY AND MAP BOARDS MK 2 AS PER DRG NO OS 30986 17 SHEETS

CASE ARTILLERY AND MAP BOARDS MK 2 AS PER DRG NO OS 30986 17 SHEETS

CASE ARTILLERY AND MAP BOARDS MK 2 AS PER DRG NO OS 30986 17 SHEETS

• SL. NO. 61 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DT. 12.02.2019

• SL. NO. 61 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DT. 12.02.2019

IS 1593-2018 Revision 3

IS 1593-2018 Revision 3

• MSME

• IS 1593-2018 Revision 3

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

• MSME

• H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

• MSME

• SLEEVE RUBBER TO CI (A) DRG NO.IT X 223 DC(I) 29442-A(OFBA/ CORDT/22 DTD 25.2.70)TO SPECN.CIA 0516(C)37024-A DT03/08/05

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

• MSME

• TAPE COTTON WHITE UNPROOFED FOR AMMUNITION 30MM WIDE TO SPECN IND/ME/888 2015 DC-6104-ME DT.31.08.2019.

CR 2477 BATTERY AS PER SPEC 42

CR 2477 BATTERY AS PER SPEC 42

• ASSOCIATED TESTING /INSPECTION FACILITY

• AS PER OFD TENDER DOCUMENTS

ARM, RANGE NO.5 MK 1(M-I) AS PER DRG.NO.: CII-247(3 SHEETS)

ARM, RANGE NO.5 MK 1(M-I) AS PER DRG.NO.: CII-247(3 SHEETS)

CII-247(3 SHEETS)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

PIVOT FOR ARTILLERY BOARD NO.2 MK-1 AS PER DRG. NO. : CIA-OS-560

PIVOT FOR ARTILLERY BOARD NO.2 MK-1 AS PER DRG. NO. : CIA-OS-560

CIA-OS-560

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019