Block To Drg. No. U-7856796 For Pzu-7 (t-90)

Block To Drg. No. U-7856796 For Pzu-7 (t-90)

• na

• na

SNOW FILTER MCT-2912 FOR TELESCOPE SIGHT 5.56MM LMG(INSAS) CASED 101A

SNOW FILTER MCT-2912 FOR TELESCOPE SIGHT 5.56MM LMG(INSAS) CASED 101A

• N/A

• N/A

SLEEVE PVC BLACK 10MM BORE

SLEEVE PVC BLACK 10MM BORE

• N/A

• N/A

RIGID PVC SHEET 1MM THICK TRANSPARENT COLOUR LESS TYPE-1 TO IS:6307-1985,SIZE-3FT X 3FT X 1MM THICK NOTE:WITH PACKING TO AVOID SCRATCHES DURING TRANSPORT.

RIGID PVC SHEET 1MM THICK TRANSPARENT COLOUR LESS TYPE-1 TO IS:6307-1985,SIZE-3FT X 3FT X 1MM THICK NOTE:WITH PACKING TO AVOID SCRATCHES DURING TRANSPORT.

• N/A

• N/A

PERSPEX/CELLULOID OPAQUE WHITE 1.50MM THICK SIZE 4FEET X 3FEET

PERSPEX/CELLULOID OPAQUE WHITE 1.50MM THICK SIZE 4FEET X 3FEET

• N/A

• N/A

PERSPEX ROD 12MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

PERSPEX ROD 12MM DIA CLEAR TRANSPARENT ACRYLIC COLOURLESS.

• N/A

• N/A

NYLON CORD 3 MM DIA.

NYLON CORD 3 MM DIA.

• N/A

• N/A

EBONITE ROD 7/8"(22.23MM) TYPE-I OF IS:6693-1972

EBONITE ROD 7/8"(22.23MM) TYPE-I OF IS:6693-1972

• N/A

• N/A

EBONITE ROD 10MM DIA. POED M 101 GRADE-A & B.

EBONITE ROD 10MM DIA. POED M 101 GRADE-A & B.

• N/A

• N/A

CELLULOID OPAQUE WHITE SHEET 1.60MM THICK

CELLULOID OPAQUE WHITE SHEET 1.60MM THICK

• N/A

• N/A

BUSH INSULATING DRG.NO.IRDE-68/50

BUSH INSULATING DRG.NO.IRDE-68/50

• N/A

• N/A

ACRYPOLE SHEET 15 MM THICK(+/-0.1MM) COLOUR CODE 430. THE SHEET SHOULD BE FREE FROM SCRACH & PASTED WITH PAPER BOTH SIDES.

ACRYPOLE SHEET 15 MM THICK(+/-0.1MM) COLOUR CODE 430. THE SHEET SHOULD BE FREE FROM SCRACH & PASTED WITH PAPER BOTH SIDES.

• N/A

• N/A

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNINITION BOX FOR UPGRADED MPV 4X4 DRG. NO. 2642-57-11/A

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNINITION BOX FOR UPGRADED MPV 4X4 DRG. NO. 2642-57-11/A

DRG. NO. 2642-57-11/A

• AS PER DRAWING ATTACHED.

• AS PER DRAWING ATTACHED

INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,

INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,

• AS PER OFD TENDER CONDITION

• AS PER OFD TENDER CONDITION

Filter Glass Ns-8, Slab Size 120x120x6 Mm, Refractive Index (nd) = 1.503000, Weight Per Slab 0.21 Kg

Filter Glass Ns-8, Slab Size 120x120x6 Mm, Refractive Index (nd) = 1.503000, Weight Per Slab 0.21 Kg

• na

• na

Glass Os-23-1 Size: 120x 120 X10 Mm Ost 3-852-79 As Per Specn. Gost 9411-91

Glass Os-23-1 Size: 120x 120 X10 Mm Ost 3-852-79 As Per Specn. Gost 9411-91

• na

• na

Radiant Resistant Glass Tf-103, Slab Size 150x150x50 Mm, Refractive Index (nd) = 1.717412, Abbe Valu

Radiant Resistant Glass Tf-103, Slab Size 150x150x50 Mm, Refractive Index (nd) = 1.717412, Abbe Valu

• na

• na

Radiant Resistant Glass Tk-102, Slab Size: 100-360 X 100-250 X 30-60 Mm, Refractive Index (nd) = 1.5

Radiant Resistant Glass Tk-102, Slab Size: 100-360 X 100-250 X 30-60 Mm, Refractive Index (nd) = 1.5

• na

• na

STOP TO DRG. NO. CQA(I) -793/19 FOR TELE. MK-III, 1/SET

STOP TO DRG. NO. CQA(I) -793/19 FOR TELE. MK-III, 1/SET

CQA(I) -793/19

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

GEAR CUTTING AS PER DRG. NO. CQA(I)-46/13 BLANK WILL BE PROVIDED BY OFD

GEAR CUTTING AS PER DRG. NO. CQA(I)-46/13 BLANK WILL BE PROVIDED BY OFD

CQA(I)-46/13

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

GEAR CUTTING AS PER DRG. CII-128 BLANK WILL BE PROVIDED BY OFD

GEAR CUTTING AS PER DRG. CII-128 BLANK WILL BE PROVIDED BY OFD

CII-128

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

FRAME WITHOUT ENGRAVING AS PER DRG.NO.MCT-3468 NOTE:SAMPLE APPROVAL IS REQUIRED BEFORE BULK SUPPLY

FRAME WITHOUT ENGRAVING AS PER DRG.NO.MCT-3468 NOTE:SAMPLE APPROVAL IS REQUIRED BEFORE BULK SUPPLY

MCT-3468

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4

2756- 57- 31/ A

• AS PER DRAWING ATTACHED

• AS PER DRAWING ATTACHED

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4

• AS PER DRAWING ATTACHED

• AS PER DRAWING ATTACHED

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4

STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4

2756- 57- 31/ A

• AS PER DRAWING ATTACHED

• AS PER DRAWING ATTACHED

POWDER COATING AND SCREEN PRINTING OF NAMES ON DASHBOARD PANEL FOR UPGRADED MPV 4X4 DRG NO 2679-57-31/A

POWDER COATING AND SCREEN PRINTING OF NAMES ON DASHBOARD PANEL FOR UPGRADED MPV 4X4 DRG NO 2679-57-31/A

DRG. NO. 2679-57-31/A

• AS PER ENCLOSED DRAWING

• AS PER ENCLOSED DRAWING

PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS.

PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS.

• AS PER ATTACHED FILES

• AS PER ATTACHED FILES

PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS.

PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS.

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

EYE PIECE LOCK RING. TO DRG . MCT-2506/1. 1 PER SET FOR TELE SIGHT MK-III

EYE PIECE LOCK RING. TO DRG . MCT-2506/1. 1 PER SET FOR TELE SIGHT MK-III

MCT-2506/1

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

HOT ROLLED NORMALISED STEEL WIRE ROD 5.5 MM DIA AS PER OCFC SPECIFICATION NO.OCF/WD/EN-WIRE DATED 25.04.2019

SPECIFICATION NO.OCF/WD/EN-WIRE DATED 25.04.2019

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3

MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3

TEND-2656STAR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAM WELDING OPERATION FOR EMPTY SHELL 155MM M-107 ON CONVERSION BASIS.” SCOPE APPLICABLE TERMS AND CONDITION AS PER ANNEXURE-A (ENCLOSED HEREWITH)

SEAM WELDING OPERATION FOR EMPTY SHELL 155MM M-107 ON CONVERSION BASIS.” SCOPE APPLICABLE TERMS AND CONDITION AS PER ANNEXURE-A (ENCLOSED HEREWITH)

• SEAM WELDING OPERATION

• As per Annexure and QMI

WHEEL ALIGNMNET OF LPTA TATA 715 TC 32 BS III (4x4) VEHICLES, L.F.No. 9413104126500

WHEEL ALIGNMNET OF LPTA TATA 715 TC 32 BS III (4x4) VEHICLES, L.F.No. 9413104126500

• Scope of Work

• Scope of Work

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

K 1021

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

TEND 2517 (for K 2067)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR

LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR

MIM-K-1212-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR

REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR

MIM-K-2021-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR

FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR

MIM-K-2033-00 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006

NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006

OTF/DD/006

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.

DS CAT NO.1005-000755 DC (I) NO.24576-SA

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing/specification.
• 2. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

REQUIRED FOR AKASH SUSTAINER CONTAINER

CAP FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/00 00 00 01 & DOC NO: DOP/S&SRPD/WF-01, ISSUE NO: 04, REV. NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03, SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• RUBBER MANUFACTURING

• AT OFBH PREMISES : SURFACE PITS, FLESH REMOVAL, FLOW DEFECTS

REQUIRED FOR MANUFACTURING OF AKASH SUSTAINER

SPECIFICATION FOR TOP PLATE RUBBER PAN FOR AKASH SUSTAINER CONTAINER AS PER DRG. NO. RPD/AK/CA/01 03 02 01A & DOC NO. DOP/S&SRPD/WF-01 ISSYE NO.04, REV.NO:00 DT: 09/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• MOULDING, RUBBER MIXING

• AS PER QAP

REQUIRED FOR MANUFACTURING OF AKASH SUSTAINER

RUBBER PAD BOTTOM FOR AKASH SUSTAINER CONTAINER AS PER DRG. NO: RPD/AK/CA/01 01 00 03 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO:04, REV: 00 DT: 09/12/2011, DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• MOULDING , RUBBER MIXING

• AS PER QAP

REQUIRED FOR MANUFACTURING OF AKASH SUSTAINER

RUBBER PAD TOP FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/01 02 00 01 & DOC NO. DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• MOULDING, RUBBER MIXING

• AS PER QAP

REQUIRED FOR MANUFACTURING OF AKASH SUSTAINER

RUBBER GASKET FOR AKASH SUSTAINER CONATAINER AS PER DRG NO: RPD/AK/CA/01 02 01 098 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO: 04, REV.NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• MOULDING

• AS PER QAP

REQUIRED FOR MANUFACTURING OF AKASH SUSTAINER

O-RING FOR AKASH SUSTAINER CONTAINER AS PER DRG NO. RPD/AK/CA 01 00 00 01 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO:04, REV.NO:00 DT: 9/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• MOULDING

• AS PER QAP

REQUIRED FOR MANUFACTURING OF VARIOUS METALLIC CONTAINERS

MILD STEEL ROD 60 MM DIA FOR AKASH SUSTAINER CONTAINER AS PER IS: 2385-1977. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• ROLLING OR TURNING OR EXTRUSION

• AS PER IS 2385-1977

REQUIRED FOR MANUFACTURING OF VARIOUS METALLIC CONTAINERS

MILD STEEL ROD 08 MM DIA FOR AKASH SUSTAINER CONTAINER AS PER IS: 2385-1977. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFIATE.

• ROLLING OR EXTRUSION OR TURNING

• AS PER IS: 2385 - 1977

REQUIRED FOR MANUFACTURING OF VARIOUS METALLIC CONTAINERS

MILD STEEL ROD 15 MM DIA FOR AKASH SUSTAINER CONTAINER AS PER IS: 2385-1977. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• ROLLING OR EXTRUSION

• AS PER IS: 2385-1977

REQUIRED FOR PRODUCTION OF VARIOUS METALLIC CONTAINER

MILD STEEL ROD 70 MM DIA FOR AKASH SUSTAINER CONTAINER AS PER IS: 2385-1977. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• ROLLING OR EXTRUSION

• AS PER IS: 2385-1977

REQUIRED FOR VARIOUS METALLIC CONTAINER PRODUCTION.

MILD STEEL ROD 30 MM DIA FOR AKASH SUSTAINER CONTAINER AS PER IS: 2385-1977. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFIATE .

• ROLLING OR EXTRUSION

• AS PE IS: 2385-1977

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

MIM-K-1204-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

RETAINER TO DRG NO MIM K 2091 01 TAR

RETAINER TO DRG NO MIM K 2091 01 TAR

MIM-K-2091-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EYE GUARD AS PER DRG CWC-267/9

EYE GUARD AS PER DRG CWC-267/9

• AS PER OFD TENDER CONDITION

• AS PER OFD TENDER CONDITION

CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR

CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR

MIM - K-4004-02 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP OG FOR DAY SIGHT TELESCOPE FOR 7.62X51MM LMG AS PER DRG. NO. CWC-267/10 (05 SHEETS)

CAP OG FOR DAY SIGHT TELESCOPE FOR 7.62X51MM LMG AS PER DRG. NO. CWC-267/10 (05 SHEETS)

• AS PER OFD TENDER DOCUMENTS

• AS PER OFD TENDER CONDITION

IR LENS ASSEMBLY, FOCAL LENGTH 100MM, MANUAL FOCUS (F/# LESS THAN OR EQUAL TO 1.6, TRANSMISSION GREATER THAN OR EQUAL TO 85%, FOV FOR 17 MICRON PITCH GREATER THAN OR EQUAL TO 6 DEGREE, WEIGHT LESS THAN OR EQUAL TO 700 GM)

IR LENS ASSEMBLY, FOCAL LENGTH 100MM, MANUAL FOCUS (F/# LESS THAN OR EQUAL TO 1.6, TRANSMISSION GREATER THAN OR EQUAL TO 85%, FOV FOR 17 MICRON PITCH GREATER THAN OR EQUAL TO 6 DEGREE, WEIGHT LESS THAN OR EQUAL TO 700 GM)

• ASSEMBLY AND TESTING & ASSOCIATED TESTING/INSPECTION FACILITIES

• ASSEMBLY AND TESTING & ASSOCIATED TESTING/INSPECTION FACILITIES

VALVE COMPLETE MCT-2926/1 , SHEET-5

VALVE COMPLETE MCT-2926/1 , SHEET-5

• machining and associated testing/inspection agencies

• machining and associated testing/inspection agencies

DEES STEEL 38 MM X 32 MM X 4 MM A.F SPECN:- As Per Details given in Specn NO. S/2532/Bag Kit Universal(OG)/TC-6 and confirming to spec no.CQA(GS)/US/426(a) except size, Cadmium plated as per IS:1572-1986, Gd-B, Type-2 for production of Bag Kit Universal

DEES STEEL 38 MM X 32 MM X 4 MM A.F SPECN:- As Per Details given in Specn NO. S/2532/Bag Kit Universal(OG)/TC-6 and confirming to spec no.CQA(GS)/US/426(a) except size, Cadmium plated as per IS:1572-1986, Gd-B, Type-2 for production of Bag Kit Universal

• as per the attached list (Manufacturing Technology Files )

• as per the attached list (Testing / Inspection Facility Files )

ADM EMPTY ASSEMBLY FOR SAM-GPRS TO DRG NO 17020010000100000D AS PER QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA

QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA

• AS PER ATTACHMENT

• AS PER ATTACHMENT

THERMAL ENIGNE (12 MICRON) INTEGRATED WITH DISPLAY UNIT AS PER SPECIFICATION -37

THERMAL ENIGNE (12 MICRON) INTEGRATED WITH DISPLAY UNIT AS PER SPECIFICATION -37

• FACILITY FOR ASSEMBLING & TESTING ELECTRO MECHANICAL DEVICES LIKE DC MOTORTS, MOTORISED PUMPS, RELAYS, ELECTROMAGNETS, LIMIT SWITCHES, POWER CONTACTS AND PANELS, FACILITY FOR WINDING & ASSOCIATED TESTING /INSPECTION FACILITES.

• AS PER OFD TENDER DOCUMENTS

7.62 MACHINE GUN AMMUNITION POUCH, ACU M240B, NUTSACK,CAPACITY 50 RDS

7.62 MACHINE GUN AMMUNITION POUCH, ACU M240B, NUTSACK,CAPACITY 50 RDS

7.62 MACHINE GUN AMMUNITION POUCH, ACU M240B, NUTSACK,CAPACITY 50 RDS

• 7.62 MACHINE GUN AMMUNITION POUCH, ACU M240B, NUTSACK,CAPACITY 50 RDS

• 7.62 MACHINE GUN AMMUNITION POUCH, ACU M240B, NUTSACK,CAPACITY 50 RDS

LEVER TO DRG NO. 172.28.009CB-2

LEVER TO DRG NO. 172.28.009CB-2

172.28.009CB-2

• ATTACHED

• ATTACHED

PERSPEX SHEET CLEAR TRANSPARENT 1.6MM TOL 0.1THICK 500MMX500MM (SHEET SHOULD BE FREE OF SCRATCHES)

PERSPEX SHEET CLEAR TRANSPARENT 1.6MM TOL 0.1THICK 500MMX500MM (SHEET SHOULD BE FREE OF SCRATCHES)

• As per OFB letter No.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter No.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

DIFFUSER,LIGHT,RED,MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM

DIFFUSER,LIGHT,RED,MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM

DRG.NO. OS-14632

• As per OFB Letter No.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB Letter No.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

PCB AS PER SPEC-40

PCB AS PER SPEC-40

• 1) PCB DESIGNING 2) COMPONENT SELECTION 3) ASSOCIATED TESTING AND INSPECTION FACILITIES

• AS PER OFD TENDER CONDITIONS

WIRE-MGTF-0.12, TY16.505. 185-71

WIRE-MGTF-0.12, TY16.505. 185-71

• na

• na

ELECTRICAL INSULATING PRESS PAPER(SHEETS) SIZE-0.1MM THICK X 300MM WIDTH AS PER IS-8570-77, GRADE-D

ELECTRICAL INSULATING PRESS PAPER(SHEETS) SIZE-0.1MM THICK X 300MM WIDTH AS PER IS-8570-77, GRADE-D

• NA

• NA

ELECTRIAL INSULATING PRESS PAPER(SHEETS) SIZE-0.2MM THICK X 300MM WIDTH AS PER IS-8570-77, GRADE-D

ELECTRIAL INSULATING PRESS PAPER(SHEETS) SIZE-0.2MM THICK X 300MM WIDTH AS PER IS-8570-77, GRADE-D

• NA

• NA

SOCKET 2RMT14KUN4GIV1-V RUS. SPECN. GEO. 364.126TY JSS50860 FOR CABLE U. 48.55. 358 PZU-7(T-90)

SOCKET 2RMT14KUN4GIV1-V RUS. SPECN. GEO. 364.126TY JSS50860 FOR CABLE U. 48.55. 358 PZU-7(T-90)

• NA

• NA

COPPER WIRE TYPE -(A) TO IS-4412, OF SIZE D 0.8MM

COPPER WIRE TYPE -(A) TO IS-4412, OF SIZE D 0.8MM

• NA

• NA

TOGGLE SWITCH T-1 AS PER SPECN. NO: VRO. 360.007 TY

TOGGLE SWITCH T-1 AS PER SPECN. NO: VRO. 360.007 TY

• na

• na

FUSE HOLDER: DBP4-1B FOR INSTRUMENT: BPK-2-42

FUSE HOLDER: DBP4-1B FOR INSTRUMENT: BPK-2-42

• na

• na

POTENTIOMETER, PP3-41-680 OHM, + /-10% , AS PER SPECE. NO. OZHO 468.503 TU

POTENTIOMETER, PP3-41-680 OHM, + /-10% , AS PER SPECE. NO. OZHO 468.503 TU

• na

• na

BULB 56/8-28V/0.04A RS STOCK NO. 586419 EQUIVELENT TO RUSSIAN BULB SM-28- 0.05 FOR PZU-7 T-90

BULB 56/8-28V/0.04A RS STOCK NO. 586419 EQUIVELENT TO RUSSIAN BULB SM-28- 0.05 FOR PZU-7 T-90

• na

• na

WIRE MGTF 0.35 AS PER SPECN. NO. TY16-505-185-71

WIRE MGTF 0.35 AS PER SPECN. NO. TY16-505-185-71

• na

• na

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.20) R

UNSHIELDED MULTISTRAND FLEXIBLE WIRE (FILM LAPPED AND PVC INSULATED WIRE) MGSHV-0.20 SQMM (7/0.20) R

• na

• na

FUSE WITH CERAMIC BODY, BP1-1, 2A-250V, AS PER SPECN. NO. OLF/AL/FUSE/03

FUSE WITH CERAMIC BODY, BP1-1, 2A-250V, AS PER SPECN. NO. OLF/AL/FUSE/03

• na

• na

SHIELDED MULTISTRAND FLEXIBLE WIRE(PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-0.75 SQ

SHIELDED MULTISTRAND FLEXIBLE WIRE(PVC INSULATED & VARNISHED COTTON YARN BRAIDED WIRE) BPVLE-0.75 SQ

• NA

• NA

WIRE -PVC WIRE WITH SHIELDING - 2 CORE MPSPOE-2X0.35 SQMM AS PER SPECN OLF/AL/WIRE/06/MOD

WIRE -PVC WIRE WITH SHIELDING - 2 CORE MPSPOE-2X0.35 SQMM AS PER SPECN OLF/AL/WIRE/06/MOD

• NA

• NA