ELECTRIC SPEEDOMETER INDICATOR CP110 ASSY TO DRG NO. CP:110.3802.010CB

ELECTRIC SPEEDOMETER INDICATOR CP110 ASSY TO DRG NO. CP:110.3802.010CB

CP:110.3802.010CB

• ATTACHED

• ATTACHED

DOUBLE WIRE LED LIGHT ASSY TO DRG NO. CQA(HV)5.70.138

DOUBLE WIRE LED LIGHT ASSY TO DRG NO. CQA(HV)5.70.138

CQA(HV)5.70.138

• ATTACHED

• ATTACHED

BEVEL GEAR, DRAWING NO. U-67.15.056

BEVEL GEAR, DRAWING NO. U-67.15.056

• AS PER DRAWING

• AS PER DAWING

BEVEL GEAR, DRAWING NO. U-67.15.055

BEVEL GEAR, DRAWING NO. U-67.15.055

• AS PER DRAWING

• AS PER DRAWING

BEVEL GEAR WHEEL, DRAWING NO Y-6718199

BEVEL GEAR WHEEL, DRAWING NO Y-6718199

• BEVEL GEAR WHEEL, DRAWING NO Y-6718199
• AS PER DRAWING

• AS PER DRAWING

SPUR GEAR WHEEL, AS PER DRAWING Y-6592481

SPUR GEAR WHEEL, AS PER DRAWING Y-6592481

• AS PER DRAWING

• A PER DRAWING

RED DOT SIGHT TO DRG NO 30P 4100

30P 4100

30P 4100

• AS PER SPECIFICATION

• AS PER SPECIFICATION

RED DOT SIGHT AS PER SPECIFICATION

RED DOT SIGHT AS PER SPECIFICATION

• RED DOT SIGHT AS PER SPECIFICATION

• RED DOT SIGHT AS PER SPECIFICATION

CARRIAGE, DRAWING NO. Y-6210483

CARRIAGE, DRAWING NO. Y-6210483

• AS PER DRAWING

• AS PER DRAWING

HOLDER, (SC/307) DRAWING NO. Y-7337732

HOLDER, (SC/307) DRAWING NO. Y-7337732

• AS PER DRAWING

• AS PER DRAWING

Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL

Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL

30P 3014 STAR

• AS PER TE

• AS PER TE

SHIELD HINGED FRONT LEFT HAND TO DRG NO. 184.04.029CB-1CB

SHIELD HINGED FRONT LEFT HAND TO DRG NO. 184.04.029CB-1CB

184.04.029CB-1CB

• ATTACHED

• ATTACHED

SHIELD HINGED FRONT RIGHT HAND TO DRG NO.184.04.028CB-1CB

SHIELD HINGED FRONT RIGHT HAND TO DRG NO.184.04.028CB-1CB

184.04.028CB-1CB

• ATTACHED

• ATTACHED

9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323

9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323

• as per drg

• as per qap

PLATE, HEATING ASSY. TO DRG. NO. MCT-1618/1 FOR TNPO-160

PLATE, HEATING ASSY. TO DRG. NO. MCT-1618/1 FOR TNPO-160

DRG. NO. MCT-1618/1

• AS PER DRAWING

• AS PER DRAWING

BRACKET SOLENOID Drg.No. 081102A-00

BRACKET SOLENOID Drg.No. 081102A-00

Drg.No. 081102A-00

• AS PER DRG

• AS PER QAP

BOLT CALIBRATOR Drg.No. Y03741A-00

BOLT CALIBRATOR Drg.No. Y03741A-00

Drg.No. Y03741A-00

• AS PER DRG

• AS PER QAP

HOUSING SOLENOID Drg.No. 081101A-00

HOUSING SOLENOID Drg.No. 081101A-00

Drg.No. 081101A-00

• as per drg

• as per qap

CRADLE MOBILE Drg.No. Y17323A-00

CRADLE MOBILE Drg.No. Y17323A-00

Drg.No. Y17323A-00

• as per Drg

• as per QAP

CRADLE BASE Drg.No. Y17321A-00

CRADLE BASE Drg.No. Y17321A-00

Drg.No. Y17321A-00

• as per QAP

• as per QAP

BUSHING FORWARD Drg.No. Y00852A-01

BUSHING FORWARD Drg.No. Y00852A-01

Drg.No. Y00852A-01

• as per QAP

• as per QAP

CASING,MOTOR Drg.No. 074257B-02

CASING,MOTOR Drg.No. 074257B-02

• as per QAP

• as per QAP

SHAFT MOTOR Drg.No. 074305A-00

SHAFT MOTOR Drg.No. 074305A-00

Drg.No. 074305A-00

• as per drawing

• as per QCP

JSS-6810-47 2008(REV-2)

JSS-6810-47 2008(REV-2)

• AS PER JSS-6810-47 2008(REV-2)

• AS JSS-6810-47 2008(REV-2)

SODIUM NITRATE GRADE I SIZE 125 MICRON

SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134

SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134

• NA

• NA

BALLISTIC CAP TO OFAJ DRG NO FS 2771 C

BALLISTIC CAP TO OFAJ DRG NO FS 2771 C

• BALLISTIC CAP TO OFAJ DRG NO FS 2771 C

• BALLISTIC CAP TO OFAJ DRG NO FS 2771 C

SWIVEL BUTT SUB ASSEMBLY DRG NO 32-1100 WITH RING (32-1102), PIN FIXING SWIVEL BUT DRG. NO.32-1103 & SWIVEL BUT DRG. NO.32-1101

SWIVEL BUTT SUB ASSEMBLY DRG NO 32-1100 WITH RING (32-1102), PIN FIXING SWIVEL BUT DRG. NO.32-1103 & SWIVEL BUT DRG. NO.32-1101

32-1100, 32-1102, 32-1103 & 32-1101

• As per attached file.

• As per attached file.

STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2 & SKM-884/1*3 ENCL.(MAT.SUPPLIED BY SAF AGAINST BANK GUARANTEE

STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2 & SKM-884/1*3 ENCL.(MAT.SUPPLIED BY SAF AGAINST BANK GUARANTEE

• As per attachment

• as per attachment

DEVELOPMENT AND SUPPLY OF HARDCARRYING CASE AS PER SPEC 51

DEVELOPMENT AND SUPPLY OF HARDCARRYING CASE AS PER SPEC 51

• DEVELOPMENT AND SUPPLY OF HARDCARRYING CASE AS PER SPEC 51

• DEVELOPMENT & SUPPLY OF HARDCARRYING CASE AS PER SPEC 51

CONVERSION OF SPACER CAP TO DRG NO 304072062 WITHOUT ANODISING EP CODE NO 7074009A41 INTO SPACER CAP TO DRG NO 304072062 WITH ANODISING FOR 84 MM HEAT 751

CONVERSION OF SPACER CAP TO DRG NO. 304072062 (WITHOUT ANODISING) (EP CODE NO. 7074009A41) INTO SPACER CAP TO DRG NO. 304072062 (WITH ANODISING) FOR 84 MM HEAT 751. ANODISING IN SULPHURIC ACID CLASS 10 & BLACK DYED ACCORDING TO SPECN. NO. 301065774 (TRADE ASSISTANCE FOR ANODISING ONLY

304072062

• A S PER PQ

• AS PER QMI

CONVERSION OF PRECURSOR BODY TO DRG NO 304098319 WITHOUT ANODISING EP CODE NO 7074010A41 INTO PRECURSOR BODY TO DRG NO 304098319 WITH ANODISING ANODISING IN SULPHURIC ACID CLASS 10 & BLACK DYED ACCORDING TO SPECN NO 301065774 TRADE ASSIS

CONVERSION OF PRECURSOR BODY TO DRG NO. 304098319 (WITHOUT ANODISING) (EP CODE NO. 7074010A41) INTO PRECURSOR BODY TO DRG NO. 304098319 )WITH ANODISING). ANODISING IN SULPHURIC ACID CLASS 10 & BLACK DYED ACCORDING TO SPECN. NO. 301065774 (TRADE ASSISTANCE FOR ANODISING ONLY FOR 84 MM HEAT 751

v

• AS PER PQ

• AS PER QMI

CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359.

CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359.

• TO BE UPLOADED

• TO BE UPLOADED

9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120

9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120

• AS per DRG

• AS PER QAP

9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122

9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122

• As per Drg
• a

• As per QAP

BOX APPRATUS PULLING BACK GUN 2A TO DRG. NO. 8115-000184/ICM-1589

BOX APPRATUS PULLING BACK GUN 2A TO DRG. NO. 8115-000184/ICM -1589

• As per Drg

• AS per QAP

Cordage Nylon 66, 23 Kg Coreless Vty. No.1

IS: 4227-1998 Variety No. 1 Except that:- Nominal Linear Denstiy Core -- of Yarn (dtex), a Sheath 235x1 to 235x2 dtex tolrence of (-) 5% and (+) 10% Breaking load on 15 cm 226 N,min Test Length, N TPM (final) 100, min.

• As per Drawing/Specification

• As per Drawing/Specification

Slide cocking handle DRG No.0204 03 04 01 12 002 22DA in convonsion with DRG No.0204 03 04 01 12 002 12DA.

Slide cocking handle DRG No.0204 03 04 01 12 002 22DA in convonsion with DRG No.0204 03 04 01 12 002 12DA.

DRG No.0204 03 04 01 12 002 22DA in convonsion with DRG No.0204 03 04 01 12 002 12DA.

• MIM ROUTE

• Chemical a Mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the. drawings a other parameter which are mentioned in relevant drawings.

Holding opening Device ( HOD) DRG.No.0204 03 04 01 12 003 00DA.

Holding opening Device ( HOD) DRG.No.0204 03 04 01 12 003 00DA.

DRG.No.0204 03 04 01 12 003 00DA.

• MIM ROUTE

• Chemical a Mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the. drawings a other parameter which are mentioned in relevant drawings.

Ring (14.5 mm Dia)

SPECN-ADRDE/1.6.01.01.03-02

• As per Drawing/Specification

• As per Drawing/Specification

INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE

INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF) SK 435/5 (5) CAP HOLDER TO DRG.NO. CNA(OF) SK 435/6 (6) WASHER TO DRG.NO.CNA(OF) SK 435/7 (7) STRIKER SUB ASSY.TO DRG.NO. CNA(OF) SK 435/11 CONSISTING OF (i) STRIKER TO DRG.NO. CNA(OF) SK 435/8 (ii)HOUSING TO DRG.NO.CNA(OF) SK 435/9 (iii) SHEARING PIN TO DRG.NO.CNA(OF) SK 435/10 (8) IGNITION TUBE SUB ASSY.TO DRG.NO.NASK 1102/2 (9) PAPER LINER TO DRG.NO.NASK 1102/2/1 (10) IGNITION TUBE RAW MATERIAL TO DRG.NO.NASK 1102/2/2 SHT 1 OF 2 (11) IGNITION TUBE TO DRG.NO.NASK 1102/2/2 SHT. 2 OF 2 (12) DISC ALUMINIUM TO DRG.NO.NASK 1102/3 (13) CONICAL PLUG TO DRG.NO. NASK 1102/4

SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF) SK 435/5 (5) CAP HOLDER TO DRG.NO. CNA(OF) SK 435/6 (6) WASHER TO DRG.NO.CNA(OF) SK 435/7 (7) STRIKER SUB ASSY.TO DRG.NO. CNA(OF) SK 435/11 CONSISTING OF (i) STRIKER TO DRG.NO. CNA(OF) SK 435/8 (ii)HOUSING TO DRG.NO.CNA(OF) SK 435/9 (iii) SHEARING PIN TO DRG.NO.CNA(OF) SK 435/10 (8) IGNITION TUBE SUB ASSY.TO DRG.NO.NASK 1102/2 (9) PAPER LINER TO DRG.NO.NASK 1102/2/1 (10) IGNITION TUBE RAW MATERIAL TO DRG.NO.NASK 1102/2/2 SHT 1 OF 2 (11) IGNITION TUBE TO DRG.NO.NASK 1102/2/2 SHT. 2 OF 2 (12) DISC ALUMINIUM TO DRG.NO.NASK 1102/3 (13) CONICAL PLUG TO DRG.NO. NASK 1102/4

• TO BE UPLOADED

• TO BE UPLOADED

WATER RADIATOR RH TO DRG NO. 175.31.002CB

WATER RADIATOR RH TO DRG NO. 175.31.002CB

175.31.002CB

• ATTACHED

• ATTACHED

PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS.

PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS. PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS.

• As per drg

• as per QAP

INNER DISK 172.56.009-B 6206416090

172.56.009-B

• AS PER VQC

• AS PER QAP

SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR

SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR

DRG No K-4015

• SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
• AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR

• AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR

SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K-4008 WITH FIRMS MATERIAL REQUIRED FOR TAR

AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR

DRG No K-4008

• AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR

• AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR

MANUFACTURING AND SUPPLY OF SPRING EXTRACTOR AS PER DRG No. K- 2013*

AS PER DRG No. K- 2013*

AS PER DRG No. K- 2013*

• AS PER DRG No. K- 2013*

• AS PER DRG No. K- 2013*

7th set of 3 items for MMHG consists of Following items- 1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0 2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1 3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1

7th set of 3 items for MMHG consists of Following items- 1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0 2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1 3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1

• To be uploaded

• To be uploaded

2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0

2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0

• TO BE UPLOADED

• TO BE UPLOADED

JOB WORK CONTRACT FOR 155 MM FORGING PRODUCTION AS PER ENCLOSED SCOPE OF WORK (ANNEXURE – A)

JOB WORK CONTRACT FOR 155 MM FORGING PRODUCTION AS PER ENCLOSED SCOPE OF WORK (ANNEXURE – A)

• NA

• NA

MACHINE, PULLING AND LIFTING UNIVERSAL 3 TONNE, 1A to CAT SECTION & CAT/PART No. E3/3990-000001 TO SPECN.NO. CQAE/3990/1427 /C

MACHINE, PULLING AND LIFTING UNIVERSAL 3 TONNE, 1A to CAT SECTION & CAT/PART No. E3/3990-000001 TO SPECN.NO. CQAE/3990/1427 /C

MACHINE, PULLING AND LIFTING UNIVERSAL 3 TONNE, 1A to CAT SECTION & CAT/PART No. E3/3990-000001 TO SPECN.NO. CQAE/3990/1427 /C

• AS per PQ

• as per QMI

MACHINED CASTING OF BRACKET TO DRAWING NO. 2025500 & CASTING DRAWING NO. GCF/50/39490 (REF DRG.NO.2025460)

MACHINED CASTING OF BRACKET TO DRAWING NO. 2025500 & CASTING DRAWING NO. GCF/50/39490 (REF DRG.NO.2025460)

• As per tender document QAP and Annexure L

• As per tender document QAP and Annexure L

MACHINED CASTING OF BRACKET TO DRAWING NO. 2025499 & CASTING DRAWING NO. GCF/50/39467 (REF DRG NO.2025651)

MACHINED CASTING OF BRACKET TO DRAWING NO. 2025499 & CASTING DRAWING NO. GCF/50/39467 (REF DRG NO.2025651)

• As per tender document QAP and Annexure L

• As per tender document QAP and Annexure L

MACHINED CASTING OF BRACKET LEFT TO DRAWING NO. 4077357 & CASTING DRAWING NO. GCF/50/39484(REF DRG NO. 4080113)

MACHINED CASTING OF BRACKET LEFT TO DRAWING NO. 4077357 & CASTING DRAWING NO. GCF/50/39484(REF DRG NO. 4080113)

• As per tender document QAP and Annexure L

• As per tender document QAP and Annexure L

MACHINED CASTING OF BRACKET RIGHT TO DRAWING NO. 4077356 & CASTING DRAWING NO. GCF/50/39485,(REF DRG NO 4080112)

MACHINED CASTING OF BRACKET RIGHT TO DRAWING NO. 4077356 & CASTING DRAWING NO. GCF/50/39485,(REF DRG NO 4080112)

• As per tender document QAP and Annexure L

• As per tender document QAP and Annexure L

MACHINED CASTING OFPLATE TO DRAWING NO. 4076426 & CASTING DRAWING NO. 4089370

MACHINED CASTING OFPLATE TO DRAWING NO. 4076426 & CASTING DRAWING NO. 4089370

• As per tender document QAP & Annexure L

• As per tender document QAP & Annexure L

9927097575 SWITCH MP-12 AS PER SPECN.NO. OU3.602.069 TY

9927097575 SWITCH MP-12 AS PER SPECN.NO. OU3.602.069 TY

9927097575 SWITCH MP-12 AS PER SPECN.NO. OU3.602.069 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7441123570 SOCKET-RS32TV WITH CAP AS PER SPECN. NO. AVO.364.047 TY WITH METALLIC CAP AND INSERT MATERIAL-HARD PHENOLIC

7441123570 SOCKET-RS32TV WITH CAP AS PER SPECN. NO. AVO.364.047 TY WITH METALLIC CAP AND INSERT MATERIAL-HARD PHENOLIC

7441123570 SOCKET-RS32TV WITH CAP AS PER SPECN. NO. AVO.364.047 TY WITH METALLIC CAP AND INSERT MATERIAL-HARD PHENOLIC

• ELECTRONIC ITEM

• ELECTRONIC ITEM

BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11

BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11

BOX ASSY (EMPTY) TO DRG NO.NAI (MB) - 9154 (PROV) FOR 30MM CARTG AK-630 PRACTICE AND TRACER AMMN.SPECN IA-1169(n)DC 35576-A DT.8 SEP.93.AIDE MEMOIRE P/11

• as per file attached

• as per file attached

172.61.025-1/C

172.61.025-1/C

172.61.025-1/C

• INVESTMENT CASTING

• AS PER QAP

HATCH UNIT TO 3801011025 188.11.001/C

188.11.001/C

• AS PER VQC

• AS PER QAP

BRACKET 61155121AA 003 LF NO 7440206823

BRACKET 61155121AA 003 LF NO 7440206823

61155121AA-003

• MECHANICAL COMPONENTS

• MECHANICAL COMPONENTS

STRIP 56637930 003 LF NO 7440206822

STRIP 56637930 003 LF NO 7440206822

56637930-003

• MECHANICAL COMPONENT

• MECHANICAL COMPONENTS

SMOOTH SPACER 56262169 003 LF NO 7440206818

SMOOTH SPACER 56262169 003 LF NO 7440206818

56262169-003

• MECHANICAL COMPONENTS

• MECHANICAL COMPONENTS

JOINT SPACER 56262166 003 LF NO 7440206816

JOINT SPACER 56262166 003 LF NO 7440206816

56262166-003

• MECHANICAL COMPONENT

• MECHANICAL COMPONENTS

PLUG 56089473 003 LF NO 7440206812

PLUG 56089473 003 LF NO 7440206812

56089473-003

• MECHANICAL COMPONENTS

• MECHANICAL COMPONENTS

OFE COPPER ROD AS PER EN 13604-CW009A CONDITION D SIZE 50 MM DIA

OFE COPPER ROD AS PER EN 13604-CW009A CONDITION D SIZE 50 MM DIA

• AS PER PQ

• AS PER QMI

FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019 FROM FORGING DRG NO F-2302

FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019 FROM FORGING DRG NO F-2302

AO-18.03.019

• as per attachment

• as per attachment

FABRICATION OF PINION DRG. No. AO-18.03.025 FROM PINION FORGING DRG. NO. F-2301

FABRICATION OF PINION DRG. No. AO-18.03.025 FROM PINION FORGING DRG. NO. F-2301

AO-18.03.025

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Packing Bar-cord Ring

ADRDE/1.6.01.04-30 (Prov.)

• As per Specification/Drawing

• As per Specification/Drawing

Device for Tightening Belt

SPECN. NO. – ADRDE/1.6.01.04-25 (Prov.)

• As per Specification/Drawing

• As per Specification/Drawing

Grommet With Washer 23 MM Dia

SPECN-ADRDE/1.6.01-03-01-01

• As per Specification/Drawing

• As per Specification/Drawing

Plate Stiffner

SPECN-ADRDE/1.6.01-01.07

• As per Specification/Drawing

• As per Specification/Drawing

PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY

PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY

• 1) Hot press mac machine 2) Dryer 3) Debarking machine 4) Peeler Lathe.

• a) Moisture content test b) Glue shear strength c) Water Resistance test d) Mycological test

PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY

PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY

• 1) Hot press mac machine 2) Dryer 3) Debarking machine 4) Peeler Lathe.

• a) Moisture content test b) Glue shear strength c) Water Resistance test d) Mycological test

PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)

PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)

• 1) Hot press mac machine 2) Dryer 3) Debarking machine 4) Peeler Lathe.

• a) Moisture content test b) Glue shear strength c) Water Resistance test d) Mycological test

TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV.

TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV.

• 1) Sawing mill 2) Seasoning kiln

• a) Preservation treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)

TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV

TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV

• 1) Sawing mill 2) Seasoning kiln

• a) Preservation treatment b) Moisture % c) Ultimate Transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)

P.B.ROUND EXTRUDED 140 MM DIA X 1200 MM LONG OR ITS MULTIPLE TO SPECN.BS:2874-86,DESIGNATION PB-102.OR IS:1385,PCU Sn6.

P.B.ROUND EXTRUDED 140 MM DIA X 1200 MM LONG OR ITS MULTIPLE TO SPECN.BS:2874-86,DESIGNATION PB-102.OR IS:1385,PCU Sn6.

• As per Spec

• As per Spec.

BOTTOM & TOP PACKING SHEET TO SPECN. HEMRL DRG HE/CAST 086DET-02, CHARGE HOLDING TRAY(SUB ASSLY) TO SPECN HEMRL DRG HE/CAST 086 DET-03 SADDLE HOLDING TRAY TO SPECN.HEMRL DRG.HE/CAST 086 DET-09 MATL:ALL ABOVE ITEMS IS MADE BY EXPANDEDLINKED POLYETHYLENE FOAM TO IND/ME 1023(PRO) DC NO. 3857 ME

BOTTOM & TOP PACKING SHEET TO SPECN. HEMRL DRG HE/CAST 086DET-02, CHARGE HOLDING TRAY(SUB ASSLY) TO SPECN HEMRL DRG HE/CAST 086 DET-03 SADDLE HOLDING TRAY TO SPECN.HEMRL DRG.HE/CAST 086 DET-09 MATL:ALL ABOVE ITEMS IS MADE BY EXPANDEDLINKED POLYETHYLENE FOAM TO IND/ME 1023(PRO) DC NO. 3857 ME

HEMRL DRG HE/CAST 086DET-02

• Sizing/Cutting

• a) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) b) General purpose engineering equipment’s like Vernier, Scale, tape etc. to measure dimensions