18MM IMAGE INTENSIFIER TUBE, XR-5, ANVIS TYPE, INVERTING FLAT OUTPUT AS PER DRG. NO. MCT-3476 (COMPRISING 04 SHEETS) FOR PNV MONOCULAR

18MM IMAGE INTENSIFIER TUBE, XR-5, ANVIS TYPE, INVERTING FLAT OUTPUT AS PER DRG. NO. MCT-3476 (COMPRISING 04 SHEETS) FOR PNV MONOCULAR

MCT-3476

• NA

• NA

WASER SPRING SINGLE COIL PHOSPHER BRONZE 4MM

WASER SPRING SINGLE COIL PHOSPHER BRONZE 4MM

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING,STEEL 6.6 SIZE-M1.6X2 AS PER IS-2388

SCREW GRUB SLOTTED HEAD CONICAL HEAD WITH CADMIUM PLATING,STEEL 6.6 SIZE-M1.6X2 AS PER IS-2388

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

M/C WASHER 6.4 IS:2016 STEEL FOR CLINOMETER 2A46 FOR T-72 GUN.

M/C WASHER 6.4 IS:2016 STEEL FOR CLINOMETER 2A46 FOR T-72 GUN.

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

SPLIT PIN STEEL 1/16" X 1/2" LONG IS-549/1974

SPLIT PIN STEEL 1/16" X 1/2" LONG IS-549/1974

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

O-RING FOR LASER AS PER DRG.NO.CWC-252/24

O-RING FOR LASER AS PER DRG.NO.CWC-252/24

DRG.NO.CWC-252/24

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING CAP AS PER DRG.NO.:CWC-252/20

O-RING CAP AS PER DRG.NO.:CWC-252/20

DRG.NO.:CWC-252/20

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING ADAPTOR AS PER DRG.NO.:CWC-252/19

O-RING ADAPTOR AS PER DRG.NO.:CWC-252/19

DRG.NO.:CWC-252/19

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING ADAPTOR AS PER DRG.NO.:CWC-252/18

O-RING ADAPTOR AS PER DRG.NO.:CWC-252/18

DRG.NO.:CWC-252/18

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING EP AS PER DRG.NO.:CWC-252/8

O-RING EP AS PER DRG.NO.:CWC-252/8

DRG.NO.:CWC-252/8

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING,25X1,NBR 50

O-RING,25X1,NBR 50

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

O-RING, 30.5X1.2 , SILICONE BLACK

O-RING, 30.5X1.2 , SILICONE BLACK

• As per OFB letter No.OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

• As per OFB letter No.OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

RIVET COPPER FLAT HEAD 1.6 DIA X 6.5 MM LONG FOR DEVICE F.C

RIVET COPPER FLAT HEAD 1.6 DIA X 6.5 MM LONG FOR DEVICE F.C

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

RIVET COPPER CSK HD. 1.6X3.5MM LONG FOR PLOTTER 81MM MORTAR CASED 101A.

RIVET COPPER CSK HD. 1.6X3.5MM LONG FOR PLOTTER 81MM MORTAR CASED 101A.

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

RIVETS BRASS FT.HD.2X5MM LONG

RIVETS BRASS FT.HD.2X5MM LONG

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

O-RING,SILICONE ,21X1, 55 SHORE.

O-RING,SILICONE ,21X1, 55 SHORE.

• As per OFB letter no. OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

• As per OFB letter no. OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

O RING TO DRG. NO. MCT-826 (GF-235152)

O RING TO DRG. NO. MCT-826 (GF-235152)

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

• As per OFB letter no.OFB/108/Online VR/QC dtd.12.02.2019 with annexure-A

MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING

MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING

DRG.NO.CWC-240/56

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with Annexure-A

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with Annexure-A

RIGID PVC SHEET 1MM THICK TRANSPARENT COLOUR LESS TYPE-1 TO IS:6307-1985,SIZE-3FT X 3FT X 1MM THICK NOTE:WITH PACKING TO AVOID SCRATCHES DURING TRANSPORT.

RIGID PVC SHEET 1MM THICK TRANSPARENT COLOUR LESS TYPE-1 TO IS:6307-1985,SIZE-3FT X 3FT X 1MM THICK NOTE:WITH PACKING TO AVOID SCRATCHES DURING TRANSPORT.

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with annexure-A

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with annexure-A

OPTICAL COMPONENT ASSY.TO DRG.MCT-3139. IRDE-2048/SA-9

OPTICAL COMPONENT ASSY.TO DRG.MCT-3139. IRDE-2048/SA-9

MCT-3139. IRDE-2048/SA-9

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)

ALLUMINIUM ALLOY SHEET OF SIZE 3 MM THICK X 500 MM WIDE TO SPCN. IS:737,GR.24345 IN WP COND.IN RUNNING LENGTH OF 2 TO 3 MTRS.

ALLUMINIUM ALLOY SHEET OF SIZE 3 MM THICK X 500 MM WIDE TO SPCN. IS:737,GR.24345 IN WP COND.IN RUNNING LENGTH OF 2 TO 3 MTRS.

• na

• na

CASE HARDENING ALLOY STEEL SHEET OF 7 MM THICK X500 MM WIDE X1000 MM LONG (MIN.) TO SPCN. IS:4432-1988,GR.16MN5CR4 MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

CASE HARDENING ALLOY STEEL SHEET OF 7 MM THICK X500 MM WIDE X1000 MM LONG (MIN.) TO SPCN. IS:4432-1988,GR.16MN5CR4 MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• na

• na

BRONZE SHEET OF SIZE 0.5 MM THICK TO SPCN.BS-2870-80, CS-101

BRONZE SHEET OF SIZE 0.5 MM THICK TO SPCN.BS-2870-80, CS-101

• na

• na

STEEL SHEET OF SIZE 6 MM THICK X500MM WIDTH TO SPECN. IS: 5517:93, GR.50C8, IN THE RUNNING LENGTH OF 2 METRE AND ABOVE.

STEEL SHEET OF SIZE 6 MM THICK X500MM WIDTH TO SPECN. IS: 5517:93, GR.50C8, IN THE RUNNING LENGTH OF 2 METRE AND ABOVE.

• na

• na

CASE HARDENING ALLOY STEEL SHEET OF 12 MM THICK X 500 MM WIDE X 1000 MM LONG (MIN.) TO SPCN.IS:4432-1988,GR.16MN5CR4 MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

CASE HARDENING ALLOY STEEL SHEET OF 12 MM THICK X 500 MM WIDE X 1000 MM LONG (MIN.) TO SPCN.IS:4432-1988,GR.16MN5CR4 MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• na

• na

STAINLESS STEEL SHEET SIZE 1.4 MM THICK X 300 X 1000 OF IS: 6911:92, GR. X15CR16NI2, AS PER DRG.NO. U-73.81.485-01

STAINLESS STEEL SHEET SIZE 1.4 MM THICK X 300 X 1000 OF IS: 6911:92, GR. X15CR16NI2, AS PER DRG.NO. U-73.81.485-01

• na

• na

IC FOR 20 MM AMR MUZZLE BRAKE TO DRG NO TEND 1791*2 REQD FOR 44P 12001 FOR 14.5/20MM AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

IC FOR 14.5 MM AMR MUZZLE BRAKE TO DRG NO TEND 1790*2 REQD FOR 44P 17001* FOR 14.5/20MM AMR

As per OFB requirements

• As per OFB requirements

• As per OFB requirements

TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE FOR COLLIMETER INFINITY

TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE FOR COLLIMETER INFINITY

MCT-2705 COMPLETE

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

BRONZE ROUND BAR DIA 20 MM AS PER BS:287Õ -1980 GR.CS-101

BRONZE ROUND BAR DIA 20 MM AS PER BS:287Õ -1980 GR.CS-101

• NA

• NA

BRONZE ROUND BAR OF SIZE 15 MM AS PER BS:2874 GR. CS-101 "M" IN RUNNING LENGTH OF 2 TO 3 MTR

BRONZE ROUND BAR OF SIZE 15 MM AS PER BS:2874 GR. CS-101 "M" IN RUNNING LENGTH OF 2 TO 3 MTR

• na

• na

BRASS TUBE OUTER DIA 75 MM X WALL THICKNESS 7 MM (T75X7) TO SPCN. IS:407:CUZN37,CONDITION-TA IN RUNNING LENGTH OF 1.5 TO 2 MTRS.

BRASS TUBE OUTER DIA 75 MM X WALL THICKNESS 7 MM (T75X7) TO SPCN. IS:407:CUZN37,CONDITION-TA IN RUNNING LENGTH OF 1.5 TO 2 MTRS.

• na

• na

BRASS ROD 3MM DIA TO SPCN IS: 8364,TYPE-III COND.(O) IN THE RUNNING LENGTH OF 2 TO 3 MTRS.

BRASS ROD 3MM DIA TO SPCN IS: 8364,TYPE-III COND.(O) IN THE RUNNING LENGTH OF 2 TO 3 MTRS.

• na

• na

BRASS ROD EXTRUDED QUALITY SIZE 50 MM DIA IN RUNNING LENGTH OF 3 MTR. TO SPECN. IS: 319-89, TYPE-I.

BRASS ROD EXTRUDED QUALITY SIZE 50 MM DIA IN RUNNING LENGTH OF 3 MTR. TO SPECN. IS: 319-89, TYPE-I.

• na

• na

BRASS ROD SIZE 60MM DIA TO SPCN. IS:319-89,GR-III IN RUNNING LENGTH 1.5 TO 3 MTRS.

BRASS ROD SIZE 60MM DIA TO SPCN. IS:319-89,GR-III IN RUNNING LENGTH 1.5 TO 3 MTRS.

• na

• na

BRASS ROD OF SIZE 35 MM DIA TO SPCN. IS: 319-89, GR-III, `O'CONDITION IN THE RUNNING LENGTH OF 2 TO 3 MTRS.

BRASS ROD OF SIZE 35 MM DIA TO SPCN. IS: 319-89, GR-III, `O'CONDITION IN THE RUNNING LENGTH OF 2 TO 3 MTRS.

• na

• na

STEEL BRIGHT BAR 20MM DIA TO SPCN IS: 7283-1992 OF IS: 1570(PT-II)-1979 GR.20C8 IN RUNNING LENGTH OF 2 TO3 MTRS.

STEEL BRIGHT BAR 20MM DIA TO SPCN IS: 7283-1992 OF IS: 1570(PT-II)-1979 GR.20C8 IN RUNNING LENGTH OF 2 TO3 MTRS.

• NA

• NA

STEEL BRIGHT BAR 20MM DIA TO SPCN IS: 7283-1992 OF IS: 1570(PT-II)-1979 GR.20C8 IN RUNNING LENGTH OF 2 TO3 MTRS.

STEEL BRIGHT BAR 20MM DIA TO SPCN IS: 7283-1992 OF IS: 1570(PT-II)-1979 GR.20C8 IN RUNNING LENGTH OF 2 TO3 MTRS.

• NA

• NA

CASE HARDNING ALLOY STEEL ROD OF SIZE 60 MM DIATO SPCN. IS:4432-88,GR.16MN5CR4 IN RUNNING LENGTH OF 3 MTRS. MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS: 2049-78.

CASE HARDNING ALLOY STEEL ROD OF SIZE 60 MM DIATO SPCN. IS:4432-88,GR.16MN5CR4 IN RUNNING LENGTH OF 3 MTRS. MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS: 2049-78.

• NA

• NA

STEEL BRIGHT BAR MEDIUM CARBON 65 MM DIATO SPECN. IS:7283-92 OF IS:5517- 93,GR.50C8 IN RUNNING LENGTH OF 2.5 MTRS. APPROX.

STEEL BRIGHT BAR MEDIUM CARBON 65 MM DIATO SPECN. IS:7283-92 OF IS:5517- 93,GR.50C8 IN RUNNING LENGTH OF 2.5 MTRS. APPROX.

• NA

• NA

STEEL BRIGHT BAR 55 MM DIATO SPECN.lS:7283-92 OF IS:5517-93,GR.50C8 IN RUNNING LENGTH OF 2 MTRS. APPROX.

STEEL BRIGHT BAR 55 MM DIATO SPECN.lS:7283-92 OF IS:5517-93,GR.50C8 IN RUNNING LENGTH OF 2 MTRS. APPROX.

• NA

• NA

CASE HARDENING ALLOY STEEL ROD 65 MM DIA TO SPECN. IS:4432-88,GR.16MN5CR4 IN RUNNING LENGTH OF 2 MTRS. MATERIALSHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

CASE HARDENING ALLOY STEEL ROD 65 MM DIA TO SPECN. IS:4432-88,GR.16MN5CR4 IN RUNNING LENGTH OF 2 MTRS. MATERIALSHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• NA

• NA

STAINLESS STEEL ROD 72 MM DIA TO SPECN. IS:6603-2001, GR. X15CR16NI2 IN RUNNING LENGTH OF 3 MTRS. MATERIAL TO BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

STAINLESS STEEL ROD 72 MM DIA TO SPECN. IS:6603-2001, GR. X15CR16NI2 IN RUNNING LENGTH OF 3 MTRS. MATERIAL TO BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• NA

• NA

STAINLESS STEEL ROD 70 MM DIA TO SPCN. IS:6603-2001, GR. X15CR16NI2 IN RUNNING LENGTH OF 3 MTRS. MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

STAINLESS STEEL ROD 70 MM DIA TO SPCN. IS:6603-2001, GR. X15CR16NI2 IN RUNNING LENGTH OF 3 MTRS. MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• NA

• NA

STEEL ROD 95 MM DIA TO SPCN. IS:7283-92 OF IS:1570(PT-II)-1979,GR.20C8

STEEL ROD 95 MM DIA TO SPCN. IS:7283-92 OF IS:1570(PT-II)-1979,GR.20C8

• NA

• NA

CHROMIUM ALLOY STEEL ROD OF SIZE 55 MM DIA TO SPCN. IS:4398-72,GR.103CR2 IN RUNNING LENGTH OF 3 MTRS.MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

CHROMIUM ALLOY STEEL ROD OF SIZE 55 MM DIA TO SPCN. IS:4398-72,GR.103CR2 IN RUNNING LENGTH OF 3 MTRS.MATERIAL SHOULD BE SUPPLIED DULY COLOUR CODED AS PER IS:2049-78.

• NA

• NA

PAPER LABEL INSTRUCTION (IRDE-1131/3) DRG. NO. MCT-882

PAPER LABEL INSTRUCTION (IRDE-1131/3) DRG. NO. MCT-882

• NA

• NA

USER HANDBOOK OF PNV MONOCULAR,SIZE:14.5 X 22 CM, INCLUDING PHOTOS & SKETCHES, BILINGUAL PRINTED IN BLACK ON BOTH SIDE ON MAPLITHO PAPER 80 GSM WITH COVER OF HARD LAMINATED PULP SHEET/ART SHEET 220 GSM, FRONT SIDE PRINTED, STAPLE BIND. NO.OF PAGES=44,SAMPLE TO BE APPR.BEFORE BULK SUPPLY (AS PER MATTER PROVIDED BY OFD)

USER HANDBOOK OF PNV MONOCULAR,SIZE:14.5 X 22 CM, INCLUDING PHOTOS & SKETCHES, BILINGUAL PRINTED IN BLACK ON BOTH SIDE ON MAPLITHO PAPER 80 GSM WITH COVER OF HARD LAMINATED PULP SHEET/ART SHEET 220 GSM, FRONT SIDE PRINTED, STAPLE BIND. NO.OF PAGES=44,SAMPLE TO BE APPR.BEFORE BULK SUPPLY (AS PER MATTER PROVIDED BY OFD)

• NA

• NA

LOG BOOK OF PNV MONOCULAR , SIZE: 14.5 X 22 CM, ONE SIDE PRINTED ON MAPLITHO PAPER 80 GSM WITH COVER OF HARD PULP BOARD 220 GSM, FRONT SIDE PRINTED IN BLACK INK WITH STAPLE BINDING NO.OF PAGES=34. SAMPLE TO BE APPROVED BEFORE BULK SUPPLY(AS PER MATTER PROVIDED BY OFD

LOG BOOK OF PNV MONOCULAR , SIZE: 14.5 X 22 CM, ONE SIDE PRINTED ON MAPLITHO PAPER 80 GSM WITH COVER OF HARD PULP BOARD 220 GSM, FRONT SIDE PRINTED IN BLACK INK WITH STAPLE BINDING NO.OF PAGES=34. SAMPLE TO BE APPROVED BEFORE BULK SUPPLY(AS PER MATTER PROVIDED BY OFD

• NA

• NA

COVER FILTER DRG. NO. MCT-2203

COVER FILTER DRG. NO. MCT-2203

DRG. NO. MCT-2203

• As per OFB letter No. OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

• As per OFB letter No. OFB/108/Online VR/QC dtd.12.02.2019 with Annexure-A

INVESTMENT CASTING OF HOLDER TO DRG NO. B-23/IC/7334605/72 M1

INVESTMENT CASTING OF HOLDER TO DRG NO. B-23/IC/7334605/72 M1

DRG NO. B-23/IC/7334605/72 M1

• NA

• NA

STEEL FORGED TRIGGER TO DRG NO.SK-5294* D.A. 11/2020.

STEEL FORGED TRIGGER TO DRG NO.SK-5294* D.A. 11/2020.

• Machining & Assy.

• as per attached document

BOX WOOD PLATE BASE 1 A EQUIP, 81 MM MORTAR TO DRG NO 8115-000008

BOX WOOD PLATE BASE 1 A EQUIP, 81 MM MORTAR TO DRG NO 8115-000008

8115-000008

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BOX WOOD SERVICE 1 A TO DRG NO 8115-000007

AS PER DRAWING

8115-000007

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SLEEVE TO DRG NO BOF 6151786

SLEEVE TO DRG NO BOF 6151786

BOF 6151786

• SLEEVE TO DRG NO BOF 6151786

• SLEEVE TO DRG NO BOF 6151786

Trade assistance for Fabrication of M.S. Pipe

IND/GS/1691 (a)

• As per given Specification, Drawing and T&C attached

• As per given Specification, Drawing and T&C attached

Trade assistance for Fabrication of Gland Nut

IND/GS/1691(a)

• As per given Specification, Drawing and T&C attached

• As per given Specification, Drawing and T&C attached

Trade assistance of Fabrication of Union Nut

IND/GS/1691 (a)

• As per given specification, Drawing and T&C attached.

• As per given specification, Drawing and T&C attached.

Trade assistance for Fabrication of Bend Pipe

IND/GS/1691 (a)

• As per given specification, Drawing and T&C attached.

• As per given specification, Drawing and T&C attached.

Trade assistance for Fabrication of Adopter Nut

IND/GS/1691 (a)

• As per given specification, Drawing and T&C attached.

• As per given specification, Drawing and T&C attached.

Trade assistance for Fabrication of Hose Union

IND/GS/1691 (a)

• As per given Specification and T&C attached.

• As per given Specification and T&C attached.

BELLEVILLE SPRINGH DRG 2A466M. 109-55 (9073200228)

BELLEVILLE SPRINGH DRG 2A466M. 109-55 (9073200228)

• BELLEVILLE SPRINGH DRG 2A466M. 109-55 (9073200228)

• BELLEVILLE SPRINGH DRG 2A466M. 109-55 (9073200228)

consist of webbing cotton belt and leather pad

(9911848165) BELT ASSEMBLY FOR AKASH SUSTAINER CONTAINER AS PER DRG NO. RPD/AK/CA/01 03 03 00 SHEET 1 OF 2 & DOC NO: DOP/S&SRPD/WF-01, ISSUE O: 04, REV. NO: 00 DT: 09/12/2011 DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE.

• Cotton belt Manufacturing, Leather Technology

• as per QAP

BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 9021STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

REQUIRED FOR METALLIC CONTAINER FOR TU33E

AS PER DRAWING NUMBER OFBH/SK/1535

• SHEARING, FORMING, DRILLING, PUNCHING

• AS PER QAP

REQUIRED FOR METALLIC CONTAINER FOR TU33E

G.I. STEEL SHEET 0.63+-0.03 MM THICKNESS FROM CONTINUOUS LINES OF CLASS 1(WEIGHT OF 1SQM OF COATING LAYER, APPLED FROM TWO SIDES, G-FROM 258 TO 570, COATING THICKNESS, MICRON –FROM 18 TO 40 SIZE: 1250 X 2500 MM.

• CUT TO SIZE SHEARING. GALVANIZING PROCESS

• AS PER QAP

REQUIRED FOR METALLIC CONTAINER FOR TU33E

AS PER DRAWING NO. OFBH/SK/1534.

• SHEARING, METAL FORMING

• AS PER QAP

REQUIRED FOR METALLIC CONTAINER FOR TU33E

AS PER DRAWING NO. OFBH/SK/1533.

• SHEARING, METAL FORMING

• AS PER QAP

REQUIRED FOR METALLIC CONTAINER FOR TU33E

AS PER DRAWING NO. OFBHSK/1532

• SHEARING, METAL FORMING

• AS PER QAP

BODY IRDE-387/1(COMPRISING OF 3 SHEETS)

BODY IRDE-387/1(COMPRISING OF 3 SHEETS)

IRDE-387/1(COMPRISING OF 3 SHEETS)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

CORNER AS PER OLF/STD/245

CORNER AS PER OLF/STD/245

OLF/STD/245

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

LOCK AS PER OLF/STD/243

LOCK AS PER OLF/STD/243

OLF/STD/243

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

HANDLE WITH CLAMP AS PER OLF/STD/244

HANDLE WITH CLAMP AS PER OLF/STD/244

OLF/STD/244

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A enclosed)

PROTECTOR RIGHT TO DRG.NO.1146579

PROTECTOR RIGHT TO DRG.NO.1146579

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PROTECTOR LEFT TO DRAWING.NO.1146577

PROTECTOR LEFT TO DRAWING.NO.1146577

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

RECOIL INDICATOR TO DRAWING NO.1144034

RECOIL INDICATOR TO DRAWING NO.1144034

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

BOLT-M16-6GX35.88.38XC.016

GOST:7769-70

• AS PER ENCLOSED CORE COMPETENCY REQUIREMENT

• AS PER ENCLOSED CORE COMPETENCY REQUIREMENT

SEALING RING TO 172-12-032 TO 6206111456

RUBBER 4326-1 TY 005 216 - 75

172-12-032

• Manufacturing Technology is attached

• Manufacturing Technology & Testing / inspection is attached

T.A BOLT(M20 X 1.5-6G

["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.

DRG.NO.172.55.026

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. CNC lathe/ centre lathe 3. Vertical Milling machine/VMC
• 1. Heat treatment (austempering)2. Cadmium plating

• TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 PROCESS SHEETS- HOT UP SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.

T.A.BOLT(M27 X 1.5-6G

["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES

DRG.NO.219.35.158

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. CNC lathe/centre lathe 3. Vertical Milling machine/VMC
• 1. Heat treatment (austempering) 2. Cadmium plating

• TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.