INSITU RUBBER MOULDING OF 125MM FSAPDS PRACTICE SHOT AS PER DRG NO: 9607 01 03 03 04 000 12TC, AS PER TECHNICAL SPECIFICATION AND QUALITY DOCUMENT NO. DRDO – ARDE – DOA – TOT – 209 - 2017 REVISION NO.02 DATE 07/02/2020 PAGE NOS.31 TO 34

INSITU RUBBER MOULDING OF 125MM FSAPDS PRACTICE SHOT AS PER DRG NO: 9607 01 03 03 04 000 12TC, AS PER TECHNICAL SPECIFICATION AND QUALITY DOCUMENT NO. DRDO – ARDE – DOA – TOT – 209 - 2017 REVISION NO.02 DATE 07/02/2020 PAGE NOS.31 TO 34

INSITU RUBBER MOULDING OF 125MM FSAPDS PRACTICE SHOT AS PER DRG NO: 9607 01 03 03 04 000 12TC, AS PER TECHNICAL SPECIFICATION AND QUALITY DOCUMENT NO. DRDO – ARDE – DOA – TOT – 209 - 2017 REVISION NO.02 DATE 07/02/2020 PAGE NOS.31 TO 34

• INSITU RUBBER MOULDING OF 125MM FSAPDS PRACTICE SHOT AS PER DRG NO: 9607 01 03 03 04 000 12TC, AS PER TECHNICAL SPECIFICATION AND QUALITY DOCUMENT NO. DRDO – ARDE – DOA – TOT – 209 - 2017 REVISION NO.02 DATE 07/02/2020 PAGE NOS.31 TO 34

• INSITU RUBBER MOULDING OF 125MM FSAPDS PRACTICE SHOT AS PER DRG NO: 9607 01 03 03 04 000 12TC, AS PER TECHNICAL SPECIFICATION AND QUALITY DOCUMENT NO. DRDO – ARDE – DOA – TOT – 209 - 2017 REVISION NO.02 DATE 07/02/2020 PAGE NOS.31 TO 34

SUPPLY OF TUNGSTEN POWDER AS PER ARDE SPECIFICATION NO.ARDE/SPECN/PNWH/MAT/ TAP : 2012

SUPPLY OF TUNGSTEN POWDER AS PER ARDE SPECIFICATION NO.ARDE/SPECN/PNWH/MAT/ TAP : 2012

• AS PER ARDE SPECIFICATION NO.ARDE/SPECN/PNWH/MAT/ TAP : 2012

• AS PER ARDE SPECIFICATION NO.ARDE/SPECN/PNWH/MAT/ TAP : 2012

PACKING FITMENT OF 81MM ATAL SMOKE GRENADE TO DRG.NO.HEMRL PYRO/SK.0275(PROV)

DRG.NO.HEMRL PYRO/SK.0275(PROV)

• AS PER DRAWING

• AS PER SPECIFICATION & DRAWING

SERVICE ASSISTANCE TO LEFT HAND HULL SIDE PLATE

LEFT HAND HULL SIDE PLATE (LF 6101201059)

188.01.004-2/PL

• AS PER VQC, DRAWING & PROCESS SHEET

• AS PER DRAWING & PROCESS SHEET

SERVICE ASSISTANCE TO RIGHT HAND HULL SIDE PLATE (LF 610201081)

RIGHT HAND HULL SIDE PLATE (LF 610201081)

184.01.003-2/PL

• AS PER VQC

• AS PER DRAWING & PROCESS SHEET

BUSH TO DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19

DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19

• AS PER DRAWING

• AS PER DRAWING & SPECIFICATION

PROPELLANT CUP CLOSURE TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.18

• AS PER DRAWING

• AS PER DXRAWING & SPECIFICATION

PROPELLANT CUP-ALTERNATE (HAVING 4 HOLES) FOR 81MM SMKGRENADE AT-AL AS PER DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.16A

• AS PER DRAWING

• AS PER DRAWING & SPECIFICATION

GASKET-II TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.21

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.21

• AS PER DRAWING

• AS PER DRAWING & SPECIFCATION

SECURING NUT TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.13

• AS PER DRAWING

• AS PER DRAWING CUM SPECIFICATION

DELAY ELEMENT(EMPTY) TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.12

• AS PER DRAWING

• AS PER DRAWING & SPECIFICATION

ADAPTER BUSH TO DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19

DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19

• AS PER DRAWING

• AS PER DRAWING

GASKET-I TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.20

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.20

• AS PER DRAWING

• AS PER DRAWING & SPECIFICATION

SEALING RING TO DRG.NO.HEMRL/PYRO/SK.0275 DET NO.22

SEALING RING TO DRG.NO.HEMRL/PYRO/SK.0275 DET NO.22

• AS PER DRAWING

• AS PER DRAWING

CENTRAL TUBE WITH DISC TO DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.4

DRG.NO.HEMRL/PYRO/SK.0275 DET.NO.4

• AS PER DRAWING

• AS PER DRAWING

OUTER CONTAINER TO DRG.NO.HEMRL/PYRO/SK.0275/1 DET.NO.2 Qty 22000 Nos

DRG.NO.HEMRL/PYRO/SK.0275/1 DET.NO.2 Qty 22000 Nos

• AS PER DRAWING

• AS PER DARWING

PHENOLIC RESIN PR-104 FOR 81MM AT-AL WITH HEXA CONTENT 5.8%TO 6.8% SPECN.NO.HEMRL/FS&D/RESIN/01

SPECN.NO.HEMRL/FS&D/RESIN/01

• AS PER SPECIFICATION

• AS PER SPECIFICATION

RED PHOSPHORUS STABILISED (3+/-0.5%)Mg(OH)2 CONTENT FOR ATAL 81 MM AS PER SPECN HEMRL/PYRO/FS&D/PS/RP/5, REV 01.

RED PHOSPHORUS STABILISED (3+/-0.5%)Mg(OH)2 CONTENT FOR ATAL 81 MM AS PER SPECN HEMRL/PYRO/FS&D/PS/RP/5, REV 01.

• RED PHOSPHORUS STABILISED (3+/-0.5%)Mg(OH)2 CONTENT FOR ATAL 81 MM AS PER SPECN HEMRL/PYRO/FS&D/PS/RP/5, REV 01.

• RED PHOSPHORUS STABILISED (3+/-0.5%)Mg(OH)2 CONTENT FOR ATAL 81 MM AS PER SPECN HEMRL/PYRO/FS&D/PS/RP/5, REV 01.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

• TO BE UPLOADED

• TO BE UPLOADED

PAINT AMMUNITION FINISHING, STOVING, SPRAYING AND DIPPING TYPES : MATT TO SPEC DEFENCE STANDARD-DEF-STAN 80-25ISSU 52009

PAINT AMMUNITION FINISHING, STOVING, SPRAYING AND DIPPING TYPES : MATT TO SPEC DEFENCE STANDARD-DEF-STAN 80-25ISSU 52009

• as per bid

• as per bid

COATING COMPOUND, BITUMINOUS SOLVENT, BLACK (FOR AMMUNITION) TO SPEC MIL-DTL-450D TYPE 1 COMPOSITION G

as per bid

• as per bid

• as per bid

NICKEL PLATING TO DRG NO SK 01295 OF RING COUPLING FOR SRGM TO SPECN OTO SPECIFICATION RS 12

NICKEL PLATING TO DRG NO SK 01295 OF RING COUPLING FOR SRGM TO SPECN OTO SPECIFICATION RS 12

• As per attached documents

• As per attached documents

NICKEL PLATING TO DRG NO SK 01299 OF MUZZLE BRAKE FOR SRGM TO SPECIFICATION OTO SPECIFICATION RS 12 2 CL II

NICKEL PLATING TO DRG NO SK 01299 OF MUZZLE BRAKE FOR SRGM TO SPECIFICATION OTO SPECIFICATION RS 12 2 CL II

• As per attached documents

• As per attached documents.

9927089442 RESISTOR S5-5-2W-160 OHM, 1% WIRE WOUND RESISTOR S5-5-2W-16 0 OHM +/- 1% AS PER SPECIFICATION NO OZHO 4 67.505 TU

9927089442 RESISTOR S5-5-2W-160 OHM, 1% WIRE WOUND RESISTOR S5-5-2W-16 0 OHM +/- 1% AS PER SPECIFICATION NO OZHO 4 67.505 TU

9927089442 RESISTOR S5-5-2W-160 OHM, 1% WIRE WOUND RESISTOR S5-5-2W-16 0 OHM +/- 1% AS PER SPECIFICATION NO OZHO 4 67.505 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9927068051 TRANSISTOR 2T 203G, AS PER SPCN SHB13.365.007 TY

9927068051 TRANSISTOR 2T 203G, AS PER SPCN SHB13.365.007 TY

9927068051 TRANSISTOR 2T 203G, AS PER SPCN SHB13.365.007 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9001120794 CAPACITOR K52-1-50V-33MKF +/-3 0% AS PER SPECIFICATION NO- OZHO. 464.039TY

9001120794 CAPACITOR K52-1-50V-33MKF +/-3 0% AS PER SPECIFICATION NO- OZHO. 464.039TY

9001120794 CAPACITOR K52-1-50V-33MKF +/-3 0% AS PER SPECIFICATION NO- OZHO. 464.039TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

9001120760 RESISTOR S5-5-2WATT-100 OHM, + /- 1% AS PER SPECIICATION NO OZHO.46 7.505 TY

9001120760 RESISTOR S5-5-2WATT-100 OHM, + /- 1% AS PER SPECIICATION NO OZHO.46 7.505 TY

9001120760 RESISTOR S5-5-2WATT-100 OHM, + /- 1% AS PER SPECIICATION NO OZHO.46 7.505 TY

• ELECTRONC ITEM

• ELECTRONC ITEM

9001120742 DIODE D 223 SPCN. NO. SM3.362. 018 TY

9001120742 DIODE D 223 SPCN. NO. SM3.362. 018 TY

9001120742 DIODE D 223 SPCN. NO. SM3.362. 018 TY

• electronic item

• electronic item

RH MIDDLE ENGAGING RING FORGING TO DRG NO: 172.40.329/F

GOST 4543-71

172.40.329/F

• AS PER VQC

• AS PER QAP

RH EXTREME ENGAGING RING FORGING TO DRG NO 172.40.328/F

GOST 4543-71

172.40.328/F

• AS PER VQC

• AS PER QAP

SET OF SMALL GEAR AND PINION COMPT A 01 NOCENTRE WHEEL ASSLY FS3143 B 01 NO ESCAPE WHEEL FS3144

SET OF SMALL GEAR AND PINION COMPT A 01 NOCENTRE WHEEL ASSLY FS3143 B 01 NO ESCAPE WHEEL FS3144

FS3143 AND FS3144

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

SETOFSMALLGEAR AND PINION TYPE COMPONENTS A CENTRE ASSY FS3190 B ESCAPE WHEEL FS3144

SETOFSMALLGEAR ANDPINIONTYPECOMPONENTS A CENTRE ASSY FS3190 B ESCAPE WHEEL FS3144

FS3190 AND FS3144

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

BLIND RIVET TO OFAJ DRG NO FS 3035

BLIND RIVET TO OFAJ DRG NO FS 3035

• BLIND RIVET TO OFAJ DRG NO FS 3035

• BLIND RIVET TO OFAJ DRG NO FS 3035

To manufacture and supply complete TURRET TRAVERSING MECHANISM ASSY WITHOUT MOTOR 176.23CB3CB as per technical documents and drawing that will be provided by HVF. 1. The bidder should have been established in India and shall have the facility as enclosed in VQC in house. The bidder has to fill up the firm compliance column and upload in Portal for verification. 2. The bidder should have sufficient infrastructure facility for material handling, suitable floor space for assembly test. The documentary evidence for the same may be provided/ uploaded. The documentary evidence for plant & machineries as asked in VQC also required to be provided/ uploaded by bidder 3. The bidder who is having all facilities, as per VQC, requirement and infrastructure facilities may collect the specifications and drawings from HVF against signed Non-Disclosure Agreement (NDA) as per the format attached

TURRET TRAVERSING MECHANISM ASSY WITHOUT MOTOR 176.23CB3CB

176.23CB3CB WITHOUT MOTOR

• AS PER VQC ATTACHED

• AS PER VQC ATTACHED

0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985

0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS: 7811-1985

• As per TE documents

• As per TE documents

7440020097 FREIN FILET LOCTITE 242 TO REF NO 91366163 PACK OF 50ML

7440020097 FREIN FILET LOCTITE 242 TO REF NO 91366163 PACK OF 50ML

• COTS ITEM

• NOT REQUIRED

9927076732 GLUE ARALDITE 2012 KIT IN 50ML PACK REF NO 91827969

9927076732 GLUE ARALDITE 2012 KIT IN 50ML PACK REF NO 91827969

• COTS ITEM

• NOT REQUIRED

7440020108 RESIN CA1010 (MASTINOX CHROMATE FREE JOINTING COMPOUND) REF NO 91878625 IN 200ML PACK

7440020108 RESIN CA1010 (MASTINOX CHROMATE FREE JOINTING COMPOUND) REF NO 91878625 IN 200ML PACK

• COTS ITEM

• NOT REQUIRED

7440020104 POLYURETHANE ADHESIVE ADEKIT A210/50 IN 50ML PACK REF NO 91783600

7440020104 POLYURETHANE ADHESIVE ADEKIT A210/50 IN 50ML PACK REF NO 91783600

• COTS ITEM

• NOT REQUIRED

GREASE KRYTOX 240AC TUBE DE TO REF No 9176355

GREASE KRYTOX 240AC TUBE DE TO REF No 9176355

• COTS ITEM

• NOT REQUIRED

T I SIGHT AS PER SPECIFICATION FOR GPMG 7.62X51 MM

T I SIGHT AS PER SPECIFICATION FOR GPMG 7.62X51 MM

AS PER SPECIFICATION

• OPTICAL SIGHT MANUFACTURING TECHNOLOLOGY

• AS PER SPECIFICATION

SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130

SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130

DRG NO HEMRL EED H 130

• Manufacturing /filling facilities is available at Unit-II.

• Testing /Inspection facilities are available.

LRF OPTICAL ASSEMBLY

AS PER SPECIFICATION

• AS PER SPECIFICATION

• AS PER SPECIFICATION

COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG

COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG

BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG

ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG

ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG

SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG

SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG

BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG

BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG

SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG

WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG

• AS PER DRG

• AS PER QAP

LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG

LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG

• AS PER DRG

• AS PER QAP

ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG

ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG

SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG

SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG

BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG

BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG

BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG

BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG

SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG

BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG

• AS PER DRG

• AS PER QAP

FABRIC NYLON 66 BREATHABLE POLYURETHANE COATED DISRUPTIVE ARMY CAMOUFLAGE PATTERN 180 CMS WIDE

As per Appendix: ‘A’ in specification No. PROV/S/3566/RAIN CAPE TC-15(d).

• As per Specification/drawing

• As per Specification/drawing

ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM.

ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM.

TODRAWING NO. HEMRL/PYRO/H/SK.021

• LATHE MACHINE, PRESSING MACHINE

• VERNIER CALLIPER, HARDNESS TESTING MACHINE

GLASS SLAB SF4 ND 1 755201

AS PER SPECIFICATION

• AS PER SPECIFICATION

• AS PER SPECIFICATION

UNCOOLED THERMAL ENGINE 12MICRON INTEGRATED WITH DISPLAY UNIT AS PER SPECIFICATION 37

AS PER SPECIFICATION

• AS PER SPECIFICATION

• AS PER SPECIFICATION

PACKING OF MMOB WITH FITMENTS TO DRG. NO. NAI(P) 514 (PROV) PKG. BOX FOR MMOB TO NAI(P) 514/1(P);SUPPORT-I TO NAI(P) 514 /2(P); SUPPORT-II TO NAI(P)514/3(P); TOP COVER TO NAI(P) 514/4(P);STENCILING ON PACKING BOX OF MMOB TO NAI(P) 514/5(P); DETAILS OF SCREEN PRINTING ON MMOB TO NAI(P) 514/6(P)

DRG. NO. NAI(P) 514 (PROV) PKG. BOX FOR MMOB TO NAI(P) 514/1(P);SUPPORT-I TO NAI(P) 514 /2(P); SUPPORT-II TO NAI(P)514/3(P); TOP COVER TO NAI(P) 514/4(P);STENCILING ON PACKING BOX OF MMOB TO NAI(P) 514/5(P); DETAILS OF SCREEN PRINTING ON MMOB TO NAI(P) 514/6(P)

• AS PER DRAWING

• AS PER DRAWING

ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A

ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A

• ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A

• ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

Drg. No: O RGB 060 1 180 0

• As per enclosed MI and Drawing

• As per enclosed MI and Drawing

STEEL BLANKS FOR ADAPTER OF RGB-60 AS PER DRG NO O RGB 060 1 181 0 REV 0

STEEL BLANKS FOR ADAPTER OF RGB-60 AS PER DRG NO O RGB 060 1 181 0 REV 0

Drg. No. O RGB 060 1 181 0

• As per enclosed MI

• As per enclosed MI and Drawing

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

Drg. No: O RGB 060 1 180 0

• As per enclosed MI and Drawing

• As per enclosed MI and Drawing

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

STEEL BLANKS FOR BODY BASE OF RGB 60 AS PER DRG NO O RGB 060 1 180 0 REV 0

Drg. No: O RGB 060 1 180 0

• As per enclosed MI and Drawing

• As per enclosed MI and Drawing

STEEL BLANK FOR NOZZLE PLATE FOR RGB 60 AS PER DRAWING NO. 0 RGB 060 1 182, AS PER LATEST REVISION

STEEL BLANK FOR NOZZLE PLATE FOR RGB 60 AS PER DRAWING NO. 0 RGB 060 1 182, AS PER LATEST REVISION

AS PER DRAWING NO. 0 RGB 060 1 182

• AS PER DRAWING NO. 0 RGB 060 1 182

• STEEL BLANK FOR NOZZLE PLATE FOR RGB 60 AS PER DRAWING NO. 0 RGB 060 1 182, AS PER LATEST REVISION

STEEL ROD AS PER, SPCN: EN8/ASTM 106 GR.B, DIA 220 (+0/-3.0) MM X LENGTH 130 (+/-1.0) MM; TO BE SUPPLIED IN CUT LENGTHS

STEEL ROD AS PER, SPCN: EN8/ASTM 106 GR.B, DIA 220 (+0/-3.0) MM X LENGTH 130 (+/-1.0) MM; TO BE SUPPLIED IN CUT LENGTHS

NA

• STEEL ROD AS PER, SPCN: EN8/ASTM 106 GR.B, DIA 220 (+0/-3.0) MM X LENGTH 130 (+/-1.0) MM; TO BE SUPPLIED IN CUT LENGTHS

• STEEL ROD AS PER, SPCN: EN8/ASTM 106 GR.B, DIA 220 (+0/-3.0) MM X LENGTH 130 (+/-1.0) MM; TO BE SUPPLIED IN CUT LENGTHS

HARNESS ASSY LRF

HARNESS ASSY LRF

• AS PER SPECIFICATION

• AS PER SPECIFICATION

FAN CONTROL BOX KYB11-6-1C ASSEMBLY DRAWING TO DRG NO.KYB11-6-1C-000CB

FAN CONTROL BOX KYB11-6-1C ASSEMBLY DRAWING TO DRG NO.KYB11-6-1C-000CB

KYB11-6-1C-000CB

• ATTACHED

• ATTACHED

Image Intensifier Tube as per specification and drawing

OLF/IIT/HPSG(INV)/SPEC/01(M1)/2009-10

OLF/R&D/IIT/197(M1)

• Manufacturing Capability

• Testing Facilities

GYROMOTOR,GA7/30A-2M, Drg No.BL2561005 GYROMOTOR,GA7/30A-2M AS PER SPECN.NO: BL2.561.005TU

GYROMOTOR,GA7/30A-2M, Drg No.BL2561005 GYROMOTOR,GA7/30A-2M AS PER SPECN.NO: BL2.561.005TU

GYROMOTOR,GA7/30A-2M, Drg No.BL2561005 GYROMOTOR,GA7/30A-2M AS PER SPECN.NO: BL2.561.005TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

PCB ADJUSTMENT BOARD AS PRE DRG NO. 7064.03.01.600 LF 7441121239

PCB ADJUSTMENT BOARD AS PRE DRG NO. 7064.03.01.600 LF 7441121239

PCB ADJUSTMENT BOARD AS PRE DRG NO. 7064.03.01.600 LF 7441121239

• ELECTRONIC ITEM

• ELECTRONIC ITEM